Manuel d'utilisation / d'entretien du produit R9040143 du fabricant Barco
Aller à la page of 101
SIMULA TION PRODUCTS B ARCO R EALITY S IM 6M KI I R9040142 R9040143 O WNER ’ S M ANUAL 08092003 R5976493/ 02.
Barco nv Simulation Products 600 Bellbrook Ave, Xenia OH 45385 Phone: +1 (937) 372 7579 Fax: +1 (937) 372 8645 E-mail: ei s@barco.com Visit us at the web: www.eis.barco.com Barco nv Simulation Products Noord laan 5, B-8520 K uurne Phone: +32 56.36.82.
Copyright © All rights reserved. No part of this document may be copied, reproduced o r translated. It shal l not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
.
Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ....................................................................................... 5 1.1 Lens Packaging . . . ............... ................... ..............
Table of con tents 5 . 5 A u d i o t u n i n g ( O p t i o n a l ) .............................. ................... ................... .................. ................. ........ 5 0 5 . 5 . 1 S t a r t u p ...... ................... ............
Table of con tents B . 2 . 1 S o u r c e n u m b e r s 9 1 — 9 6 ................ ................... ................... ................... .................. .......... 8 9 B . 2 . 2 S o u r c e n u m b e r s 8 1 — 8 6 ................ ........
Table of con tents 4 R5976493 BARCOREALITY SIM 6 MK II 08092003.
1. Packaging and Dimension s 1. P ACKAGING AND DIMENSIONS This chapter handles about the way the projector is packed and gives an overview of the dimensions. • Lens Packaging • Dimensions 1.1 Lens Packaging W ay of Packaging Lenses are supplied as a n individual item.
1. Packagin g and Dimens ions 46 82.7 211.4 169.5 139.6 14 148.9 380.6 526.8 60 43 124.1 217.2 147.8 124.4 42 Image 1-2 Side view dimensio ns projector 184.
2. Installation G uidelines 2. INST ALLA TION GUIDELINES Overview • Installation guidelines • Configuration • Lenses • Batteries Before installin g the projector, read first the safety instructions sup plied with the BarcoR eality SIM6 MKII. 2.
2. Insta llation Gu idelines is also important. T oo much ambient light will ‘wash out’ of the projected image. This appears as less contrast between the darkest and lightest parts of the image. W ith bigger screens, the ‘wash out ’ becomes mo re important.
2. Installation G uidelines Screen PD B Floor Projector CD A CD = B - A SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen TOP VIEW SW Floor Image 2-1 B Distance between ceiling and top of the screen or between floor and bottom of the screen.
2. Insta llation Gu idelines 2.3.1 Lenses A vailabl e lenses The following lenses are available, or will become ava ilable (contact a BARCO service center) as an option : Lenses Standard version Scheimpflug version QFD(1.27:1) R9840400 R9840600 QFD(2.
2. Installation G uidelines Lens program to calc ulate the projector distance is available o n the BARCO web site : h ttp://ww w.barco.com/ project ion _s yste ms/cus tomer _s ervice s/lens _p r ogram .asp 2.3.3 Lens install ation How to insta ll ? Follow the next procedure : 1.
2. Insta llation Gu idelines 2.3.4 Cleaning the lens T o minimize the possibility of dam aging the optical coating or scratchin g exposed lens surface, w e have de- veloped recommend ations for cleaning the lens. F IRST , we recomm end you try to remove any m aterial from the lens by blowing it o ff with clean, dry deionized air .
3. Connecti ons 3. CONNECTIONS Overview • Power connections • Switching on • Switching to standby • Switching off • Input source connection • Communications connections 3.1 Power connections AC Power cord connection Use the supplied power cord to connect your pro jector to the wall outlet.
3. Connecti ons F1 F2 F3 F4 F5 ADJ EXIT ENTER PAUSE PHASE TEXT SHARPN TINT COLOR BRIGHTN CONTR TREBLE BALANCE BASS VOL 9 0 7 8 5 6 34 1 2 COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE .
3. Connecti ons Max Lamp runtimes for the available projectors. SIM Projector x( M a xl a m pr u n t i m e ,i nh o u r s ) BarcoReality SIM6 MKII 1000 Using a lamp fo r more than its rec ommended life time is dangerous as th e lamp could exp lode. 3.3 Switching to standby H o wt os w i t c ht os t a n d b y ? 1.
3. Connecti ons 1. Video 2. S-Video 3. 5 cable input 4. Computer input SDI input is n ever automatically s elected. When a RCVD S is connected to the proje ctor , the ’Automatic’ selection is d isabled. S e tu po ft h ei n p u ts e l e c t i o n 1.
3. Connecti ons SDI SDO S-VIDEO VIDEO COMPUTER IEEE 1394 MOUSE MONITOR RS232 IN RS232 OUT AUDIO I N AUDIO I N AUDIO I N AUDIO I N COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 10/100 Base-T Image 3-4 Which signals can be connect ed to the 5 cable input.
3. Connecti ons Possible indicati ons on the input slot menu. • RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync. • RGB CS = RGB a nalog signals, separate sync is composite sync. • RGB CV = RGB analog signals, separate sync is composite video or tri-level sync.
3. Connecti ons 5 ground 6 ground 7 ground 8 ground 9 loop through to monitor 10 ground 1 1 loop through to monitor 12 loop through to monitor 13 horizontal/composite sync 14 vertical sync 15 loop through to monitor How to selec t slot 2. 1. Key in 2 on the RCU or local keypad.
3. Connecti ons 3.5.6 SDI input / SDI output ( optional) What can be connected ? Full compatibility with digital Betacam, or digital video sources. This avoids the need for analog processing anywhere in the video production chain and guarantees the ultimate image quality .
4. Getting started 4. GETTING ST ARTED 4.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local keypad is located on the backside of the projector .
4. Getting started F1 F2 F3 F4 F5 ADJ EXIT ENTER PAUSE PHASE TEXT SHARPN TINT COLOR BRIGHTN CONTR TREBLE BALA NCE BASS VOL 9 0 7 8 5 6 34 1 2 1 2 3 5 6 4 7 8 9 10 18 17 16 15 14 13 12 11 Image 4-1 RCU function indica tion 1 Function keys user programmable keys with functions for direct access.
4. Getting started 14 TEXT when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale can be removed by pressing ’TEXT’ key first. T o re-display the bar scale on the screen, press ’TEXT’ key again. 15 ENTER to start up the adjustment mode or to confirm a n adjustment or selection in the adjustment mode.
4. Getting started F1 F2 F3 F4 F5 ADJ EXIT ENTER PAUSE PHASE TEXT SHARPN TINT COLOR BRIGHTN CONTR TREBLE BALANCE BASS VOL 9 0 7 8 5 6 34 1 2 COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE 2 1 4 3 5 6 8 0 9 7 CONTRAST Stand-by key Image 4-3 4.
4. Getting started WARNING LENS-LOCKING IS ACTIVATED ADJUSTING THE LENS MAY DAMAGE THE PROJECTOR PRESS * TO ADJUST <EXIT> to return Menu 4-1 Quick zoom/focus adj ustment 1. Press the Selection key * . The zoom/focus menu will be displayed. 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
4. Getting started 4.5 Using the RCU Pointing to the ref lective screen 1. Point the front of the RCU to the reflective screen surface. (image 4-4) Ceiling Screen IR sensor RCU Image 4-4 Pointing the RCU via the screen to the I R sensor Hardwired Remote I nput 1.
4. Getting started SDI SDO S-VIDEO VIDEO COMPUTER IEEE 1394 MOUSE MONITOR RS232 IN RS232 OUT AUDIO I N AUDIO IN AUDI O IN AUDI O IN COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 10/100 Base-T Image 4-5 RCU Hardwired to Remote Input Directly to one of the IR sensors of the projecto r .
4. Getting started SDI SDO S-VIDEO VIDEO COMPUTER IEEE 1394 TRIG MOUSE MONITOR RS232 IN RS232 OUT AUDIO I N AUDIO I N AUDIO IN AUDIO IN COMM. PORT RC C B A RGBH / C V 5 6 2 1 4 3 45ø 45ø 45ø 45ø F.
4. Getting started A projector will respond to a RCU set to the comm on address (’0’ or ’1’) regardless of what address is set in the projector itself.
4. Getting started Ti n t Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system. Use the + button Use the - button. Sharpness Use the + button for a sharper picture. Use the - button for a softer picture. Phase Use the + or - button to adjust the phase.
5. Random Access 5. RANDOM ACCESS Overview • Random Access Overview • Random Access Start up • File Service s • Picture tuning • Audio tuning (Optional) • Geometry •S o f t E d g e •D e m o 5.
5. Random Access • Geometry -S h i f t -S i z e - Side Ke ystone - Blanking o To p o Bottom o Left o Right - Aspect R atio - O ptions [Y es/No] • Soft Edge - T ype o None o Left o Right o Left+Right o To p o Bottom o T op+Botto m -S i z e - O ptions [Y es/No] •D e m o - S plit Screen [On/Off] 5.
5. Random Access xxxxxxxx base name, 8 characters eee file extension first character C : custom made file first character S : standard file The second and third character is used for a following number (= file index). The file index for custom files : 01 to 20.
5. Random Access 5.3.4 Load file S t a r tu pL o a df i l e T o start up the load file, handle as follow : 1. Push the cursor key ↑ or ↓ to highlight Load . (menu 5-3) 2. Press ENTER to select. The Load menu displays the corresponding files depending on the installed filter .
5. Random Access 5.3.5 Edit file The Edit file menu makes it possible to change the settings of th e file according to the real settings of the connected source. Consult the source specification before entering the data. •S t a r t u p • Changing the settings • Correct value • Rename • Copy • Delete • File options 5.
5. Random Access How to change a settin g with the cursor keys and counti ng up or down? 1. Push the cursor key ↑ or ↓ to highlight an item. The color of the selected item will change. 2. Press ENTER to activate. 3. Counting up or down by pushing the cursor key ← or → .
5. Random Access Source number The source number of a non-active source can b e changed to any other source number . This makes i tp o s s i b l et oc r e a t eaf i l ef o rf u t u r es o u r c en u m b e r s . Clamp position Clamping determines the black level of the signal.
5. Random Access 5.3.5.4 Rena me Start Up T o ch ange the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight Rename . (menu 5-1 1) 2. Press ENTER . The Rename selection menu will be displayed. (menu 5-12) 3. Push the c ursor key ↑ or ↓ to select a file name.
5. Random Access 5.3.5.5 Copy Start Up T o copy the name of a se lected fi le : 1. Push the cursor key ↑ or ↓ to highlight Copy . 2. Press ENTER . The Copy selection menu will be di splayed. (menu 5-15) 3. Push the c ursor key ↑ or ↓ to select a file name.
5. Random Access 4. Press ENTER to select. If [all] is selected, your password has to be entered before all files will be deleted. A confirmation menu "Delete file ’file name’?" is displayed. (menu 5-20) 5. Press ENTER to delete the file, press EXIT if you want to kee p it.
5. Random Access File Load 1. Push the c ursor key ↑ or ↓ to highlight File Load . (menu 5-24) 2. Press ENTER to toggle between [AUTOMA T IC] or [MANUAL]. This File Load setting is default set to [AUTOMA TIC]. [AUTOMA TIC ] The projector will automatically load the fi le that is best suited for th e selected Input Slot.
5. Random Access 5.4 Picture tuning 5.4.1 Start up Start up T o improve the image quality , the items in the Picture T uning m enu can be toggled or adjusted. T o start up th e Picture T uning : 1. Push the cursor key ↑ or ↓ to highlight Picture T uning .
5. Random Access 5.4.2.1 Starting up Motion Compensatio n How to start up ? 1. Push the cursor key ↑ or ↓ to highlight Motion compensation . (menu 5-28) 2.
5. Random Access How to set the Red LCD s peed ? 1. Push the cur sor key ↑ or ↓ to highlight LCD speed R/G . (menu 5-31) 2. Press ENTER to select. A sliderbow will be displayed 3.
5. Random Access Start Up 1. Push the cursor key ↑ or ↓ to highlight Color T e mperature . (menu 5-33) 2. Press ENTER to select. The color temperature selection menu will be displayed.
5. Random Access 5.4.5 Decoding (Opt ional) Decoding is only fo r NTSC video signals. What can be done ? The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard. Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
5. Random Access Step to be taken T o adjust the input balance, the following steps have to be executed in the following order: 1. The procedure is best done when using a source that can generate a full black and full white image. 2. Start with the Black Balance.
5. Random Access Image 5-3 Full black image on the sou rce Image 5-4 Perfect Black Bala nce How to adjust the White Balance? 1. Generate a full white image on the source. (image 5-5) 2. Push the cursor key ↑ or ↓ to highlight White Balance and press ENTER to select.
5. Random Access Image 5-5 Full white image on the source Image 5-6 Perfect White Bala nce How to return to the Default factory prese t? 1. Push the cursor key ↑ or ↓ to highlight Default and press ENTER to select. (menu 5-41) The input balance is set to the d efault factory preset.
5. Random Access How to cha nge the b lack colo r ? 1. Push the cursor key ↑ or ↓ to highlight Black Color. (menu 5-42) 2. Press ENTER to select. 3. Adjust the R, G, B black levels by positioning the cursor on the displayed arrows and pressing ENTER .
5. Random Access How to stop sound rep roduction ? 1. Push the cursor key ↑ or ↓ to highlight Mute . (menu 5-45) 2. Press ENTER to toggle between [on] or [off].
5. Random Access How to set up the sou nd mode? 1. Push the cursor key ↑ or ↓ to highlight Mode . (menu 5-47) 2. Press ENTER to toggle between [stereo] or [mono].
5. Random Access 5.6.1 Intr oduction Introduction An adjustment can be done as follow : 1. Using the cursor key to adjust 2. Entering the value with the digit keys. Therefore, press ENTER to select the indicated value and enter the desired value with the digit keys.
5. Random Access When adjusting the vertical size, Th e upper side of the image is fixed ( table and ceiling mounted configurations) and only the lower side can be moved to its exact position. When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
5. Random Access Adjusting th e blanking. 1. Push the cursor key ↑ or ↓ to highlight Blanki ng . (menu 5-54) 2. Press ENTER to displ ay the blanking menu. (menu 5-55) 3. Push the cursor key ↑ or ↓ to highlight the desired blanking. 4. Press ENTER to start up the chosen blanking.
5. Random Access Set up of the geometry option s. 1. Push the cursor key ↑ or ↓ to highlight Options . (menu 5-57) 2. Press ENTER to display the Geometry options menu. (menu 5-58) 3. Press ENTER to toggle between [Y es] or [No]. 4. Press EXIT to return to the Geometry menu.
5. Random Access 5.7.2 T ype T o select the type of soft ed ge: 1. Push the cursor key ↑ or ↓ to highlight T ype. (menu 5-61 ) 2. Press ENTER to select The T ype menu will be displayed.
5. Random Access 5.7.3 Size T o change the width of the soft edge: 1. Push the cursor key ↑ or ↓ to highlight Size... (menu 5-63) 2. Press ENTER to select. Push the cursor key ← or → to set up the desired soft edge area width. Range (percentage of the complete image width): 1 to 20.
5. Random Access How to star t up Demo ? 1. Push the cursor key ↑ or ↓ to highlight Demo. (menu 5-66) 2. Press ENTER to select The Demo menu will be displayed.
5. Random Access 60 R5976493 BARCOREALITY SIM 6 MK II 08092003.
6. Installati on Mode 6. INST ALLA TION MODE Overview • Installation Mode Overview •B u i l d - u p •S t a r t u p • Input slots • No signal • Lens adjustment • Menu Position • Quick a.
6. In stallation M ode 6.1 Installation Mode Overview Installat ion Mode Overview • Input Slots •N o S i g n a l - C olor [Blue/Black] - S hutdown [On/Off] - Sh utdown T ime • Lens - Zoom/Focus .
6. Installati on Mode 6.3 Start up How to start u p the installatio n Mode 1. Push the c ursor key ↑ or ↓ to to select Installation . (menu 6-1) 2.
6. In stallation M ode The black indicated inputs are selectable an d changeable. The gray indicate d inputs are fix inputs and are not changeable. The indication in fro nt of the digit mean s : x : va lid signal connected to the inpu t. - : no valid sig nal connected to the in put.
6. Installati on Mode 6.5.2 Changing the shutd own setting How to change ? 1. Push the cursor key ↑ or ↓ to highlight No Signal . (menu 6-7) 2. Press ENTER to select. The no signal menu w ill be displayed. (menu 6-8) 3. Push the cursor key ↑ or ↓ to highlight Shutdown .
6. In stallation M ode If the “Rugged” option i s installed the * key will display a W ARNING message. WARNING LENS-LOCKING IS ACTIVATED ADJUSTING THE LENS MAY DAMAGE THE PROJECTOR PRESS * TO ADJUST <EXIT> to return Menu 6-11 Zoom/Focus adjustmen t of the lens.
6. Installati on Mode 6.7 Menu Position What can be done with the Me nubox? The Menubox position can be changed from bottom right to the cente r of the image. How to change the positi on? 1. Push the cursor key ↑ or ↓ to highlight Menu Position . (menu 6-14) 2.
6. In stallation M ode 6.8.2 Getting an overvi ew Overview T o get an overview , handle as follow : 1. Push the cursor key ↑ or ↓ to highlight Q u i c kA c c e s sK e y s . (menu 6-15) 2. Press ENTER to select. The Quick Access Keys menu will be displayed.
6. Installati on Mode 6.9.2 Defining the communica tion protocol of the RCVDS05 Which protocols are available? When a RCVDS05 is connected to the projector , the type of communi cation protocol used to communicate with the peripheral has to be defined in the 800 peripheral menu.
6. In stallation M ode 6.1 1 OSD Color What can be done? The highlighted items on the menus can be displayed in red, green or yellow . How to change t he OSD Color ? 1. Push the cursor key ↑ or ↓ to highlight OSD Color . (menu 6 -22) 2. Press ENTER to select.
6. Installati on Mode 6.13 Shutter (Optional) The shutter is optional, the presence of a shutter has to be con firmed in the shutter menu. Setting the shutter 1. Push the cursor key ↑ or ↓ to highlight Shutter . (menu 6-26) 2. Press ENTER to select.
6. In stallation M ode 72 R5976493 BARCOREALITY SIM 6 MK II 08092003.
7. Service Mode 7. SERVICE M ODE Overview • Service Mode Overview •B u i l d - u p •S t a r t u p • Identification • Change password • Change the address • Change Baudrate • Reset lamp.
7. Service Mode 7.2 Build-up Build-up The service menu is build-up in two parts which are connected toget her with the ’more’ item. If the desired item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu.
7. Service Mode The following items will be displayed: • T ype of projector : BarcoRealit y SIM6 MKII • Proj. address: T o change the address of the pr ojector , see "Projector Address",.
7. Service Mode How to change the password ? 1. Push the cursor key ↑ or ↓ to highlight Change Password . (menu 7-8) 2. Press ENTER to display the Change Password menu. (menu 7-9) 4 ’_’ characters are displayed. A new password can be entered with the digit keys of the RC U or local keypad.
7. Service Mode 7.6.2 Projector Addres s How to change the proje ctor address? 1. Push the cursor key ↑ or ↓ to highlight Projector Address . (menu 7-12) 2. Press ENTER to select. The actual address is f illed in. The first digit is highlighted. CHANGE PROJ.
7. Service Mode Start up 1. Push the c ursor key ↑ or ↓ to highlight Reset Lamp Run T ime. (menu 7-15) 2. Press ENTER . The following warning will be displayed : Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel.
7. Service Mode 7.10 Dimming 7.10.1 Lamp Dimming How to perfor m lamp dimming ? 1. Push the cursor key ↑ or ↓ to highlight Dimming (menu 7-19) 2. Press ENTER The Dimming menu is displayed (menu 7-20) 3. Push the cursor key ↑ or ↓ to highlight Lamp dimming 4.
7. Service Mode How to use the CLO menu? 1. Push the cursor key ↑ or ↓ to highlight CLO. (menu 7-21) 2. Press ENTER to select. The CLO menu will be displayed. 3. Push the cursor key ↑ or ↓ to highlight T arget Light V alue and press ENTER to select.
7. Service Mode 7.12 Panel adjustments Changing these setting s may seriously affect the performance of the pro jector . All panel adjustments are facto ry adjusted. If not really necessary , do no t touch any of these adjustme nts. They are useful wh en a new panel is in stalled.
7. Service Mode Start up 1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance . (menu 7-31) 2. Press ENTER to select. The following warning will be displayed : (menu 7-32) Uniformity is reserved to qualified service personnel. If you are not qualified, press EXI T to cancel the Preset input balance adjustments.
7. Service Mode How to start up the I2C diagnoses? 1. Push the cursor key ↑ or ↓ to highlight I2C Diagnoses . (menu 7-34) 2. Press ENTER to display the overvi ew . (menu 7-35) SERVICE BARCO LOGO PANEL ADJUSTMENT UNIFORMITY PRESET INPUT BALANCE ELECTRONIC CONVERGENCE I2C DIAGNOSIS MORE.
7. Service Mode 84 R5976493 BARCOREALITY SIM 6 MK II 08092003.
A. Standard Source setup fi les A. ST ANDARD SOURCE SETUP FILES A.1 T able overview T able ov erview The following standard source files are pre-programmed in the projector .
A. Standard Source setup fi les Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 MXGA_70 1 152x8 64 70,000 63,630 94,500 1480 1 152 909 864 MXGA_75 1 152x8 64 75,000 .
A. Standard Source setup fi les Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SXGA_100 1280x1024 100,139 10 7,350 185,500 1728 1280 1072 1024 SXGA_1 14S 10 1280x10.
A. Standard Source setup fi les Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SXGA_60L 1280x1024 60,000 64,000 196,397 3088 1280 1060 1024 SXGA_60R 1280x1024 60,00.
B. Source Num bers 81 — 86 an d 91 — 96 B. SOURCE NUMBERS 81 — 86 AND 91 — 96 B.1 Projector without any 800 peripheral connected Overview The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additio nal adjustment file can be created for these source numbers.
B. Source Numbers 81 — 86 and 91 — 96 source input 3 source input 3 source input 93 file C file C’ ... source input 6 source input 6 source input 96 file F file F’ Follow the same procedure as for a projector without a 800 peripheral connected.
C. Cleani ng the Dustfi lter C. CLEANING THE DUSTFIL TER C.1 Cleaning When should it be done? Depending on the environement, the dust filters should be cleaned at least when replacing the lamp. When the projector operates in dusty environement, clean the dust filters earlier than when replacing the l amp.
C. Cleaning the Dustfi lter 92 R5976493 BARCOREALITY SIM 6 MK II 08092003.
Index INDEX Numerics/Symb ols 5cable input 16 800 peripheral 68–69 defining the communication protocol of the RCVDS05 69 defining the output module RCVDS05 68 A Address 28–29 Program 29 RCU 29 Pro.
Index 800 peripheral 68–69 defining the communication protocol of th e RCVDS05 69 defining the output module RCVDS05 68 configuration 69 guidelines 7 start up 63 Installation Guidelines 7–8 Ambien.
Index S screen 59 split 59 service mode 74, 77 baudrate PC 77 change 77 build-up 74 identification 74 lamp runtime 77 reset 77 projector address 77 start up 74 Service mode 73 Service Mode 73 Overview.
Index 96 R5976493 BARCOREALITY SIM 6 MK II 08092003.
Revision Sheet To : Barco nv Simulatio n Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 2.1 1, Fax: +32 56.3 6.84.86 E-mail: info@barco.com, Web: www.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Barco R9040143 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Barco R9040143 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Barco R9040143, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Barco R9040143 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Barco R9040143, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Barco R9040143.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Barco R9040143. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Barco R9040143 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
