Manuel d'utilisation / d'entretien du produit R9002249 du fabricant Barco
Aller à la page of 59
VISION 1609s R9002240 R9002249 OWNER'S MANUAL.
.
BARCO PROJECTION SYSTEMS VISION 1609s R9002240 R9002249 Date : 131097 Art. No. : R5975688 OWNER'S MANUAL.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, October 1997. All rights reserved. Trademarks are the rights of their respective owners. BARCO nv/Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.
Table of Contents i-1 5975688 BARCOVISION 1609s 131097 Table of contents ................................................................................................................................................................................. i Safety instructions .
Table of Contents i-2 5975688 BARCOVISION 1609s 131097 Blanking Adjustments ............................................................................................................................................................... 6-15 Convergence Adjustment .
Safety Instructions 1-1 5975688 BARCOVISION 1609S 131097 1 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Instructions 1-2 5975688 BARCOVISION 1609S 131097 WARNING FOR THE CUSTOMERS : THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable.
Location and Function of Controls 2-1 5975628 BARCOGRAPHICS 1209S 010797 2 V NOM I MAX FREQ 120/ 23 0 Vo lt 7/5 Amp 50/6 0H z LOCA TION AND FUNCTION OF CONTROLS REAR PANEL TERMINOLOGY Communication Port (800 peripherals) * allows communication between the RCVDS switcher and the projector.
Location and Function of Controls 2-2 5975628 BARCOGRAPHICS 1209S 010797 stand-by sharpness pause/park tint color brightness contrast - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a b. RCU control panel terminology This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely.
Connections 3-1 5975688 BARCOVISION 1609S 131097 3 V NOM I MAX FRE Q 120/ 230 Vo lt 7/5A mp 50/ 60Hz CONNECTIONS AC Power (mains) Cord Connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the frontside of the projector.
Connections 3-2 5975688 BARCOVISION 1609S 131097 Signal Input Connection to the Projector : - Composite Video - S-Video - RGBS or RGsB - RGB3S or RG3sB (option) - Component Video Only available when the optional Tri-level sync module is installed. Port No Projector input Press Digit Button 1 Comp.
Connections 3-3 5975688 BARCOVISION 1609S 131097 Connecting a Composite Video source to port 1. Composite video signals from a VCR, OFF air signal decoder, etc.
Connections 3-4 5975688 BARCOVISION 1609S 131097 Connecting a RGB Analog source to port 3. Connect your RGB source via an interface to Port 3. Always use an interface when a computer and local monitor have to be connected to the projector.
Connections 3-5 5975688 BARCOVISION 1609S 131097 Connecting a RGB Analog source with Tri-level sync to port 4/5. (option) RGB analog input terminals with Tri level sync input or with Tri-level sync on green. The projector detects automati- cally where the sync signal is located.
Connections 3-6 5975688 BARCOVISION 1609S 131097 PERIPHERAL EQUIPMENT Connecting a RCVDS 05 switcher to the projector - Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules. - Serial communication with the projector.
Controlling 4-1 5975688 BARCOVISION 1609S 131097 4 fig.1 310a. DRW fig.2 CONTROLLING Caution : Do not display a stationary image with full brightness and contrast for longer than 20 min., otherwise you risk damage to the CRT's. Battery installation in the RCU.
Controlling 4-2 5975688 BARCOVISION 1609S 131097 c) RCU used in a hardwired configuration. Ceil ing Scre en IR se n sor RCU ADDR AD J EX IT STB Y MU TE TEXT BRI G HTNE SS - + - + - + - + SH ARPN ESS -.
Controlling 4-3 5975688 BARCOVISION 1609S 131097 How to display a projector address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds.
Controlling 4-4 5975688 BARCOVISION 1609S 131097 36 Analog Picture Controls The analog picture controls can be adjusted with the RCU. The control keys are located on the lower right side of the key panel of the RCU and indicated with the name of the control and an icon.
5-1 5975688 BARCOVISION 1609S 131097 Start Up of the Adjustment Mode 5 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Press the ADJUST key to enter the 'adjustment mode'.
5-2 5975688 BARCOVISION 1609S 131097 Start Up of the Adjustment Mode enter password xxxx Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (Password protection is only available when the password DIP switch on the controller module is in the ON position.
6-1 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode 6 RANDOM ACCESS ADJUSTMENT MODE Starting-Up the Random Access Adjustment mode. Push the control disk up or down to highlight "RANDOM ACCESS" and then press ENTER . Some items in the Random access mode are password protected (when the password function is enabled).
6-2 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE CONVERGENCE H SIZE V SIZE BLANKING LEFT BOTTOM RIGHT TOP V LINEARITY GREEN ONLY BLUE ON GREEN RED ON GR.
6-3 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Selecting Setup Pattern If an external source is connected to the projector, this menu will be displayed. Push the control disk up or down to highlight the desired setup pattern and then press ENTER .
6-4 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or <ENTER> to accept <EXIT> to return. Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE FOCUSING COLOR SELECT ORBITING CONTR.
6-5 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or <ENTER> to accept <EXIT> to return. Clamp Tuning Highlight CLAMP TUNING by pushing the control disk up or down and press ENTER to toggle between NORMAL and RESTORATION.
6-6 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Port 2 : Video or S-Video Port 2 can be used as a Video or S-Video input. Highlight Port 2 by pushing the control disk up or down and press ENTER to toggle between VIDEO and S-VIDEO.
6-7 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Focusing Before starting the 'focusing' adjustment, be sure the lenses are correctly focused.
6-8 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode H PHASE >< 70 H PH AS E >< 70 Select with or then <ENTER> <EXIT> to return. H P HAS E >< 70 Geometry Adjustments The geometry adjustments have to be done only on the green image.
6-9 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode for bi dden area proj ect ed raster cr t f ac e pl at e bo r de r phosphor bo rder correct raster position wrong raster position Raster Shift Adjustment The green raster must be centered both horizontally and vertically on the center of the CRT surface.
6-10 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. LEFT-RIGHT Left-Right (east-west) Adjustments Left-right adjustments affect only the vertical lines of the projected image. Only the green image is displayed while making left-right adjustments.
6-11 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
6-12 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode TOP-BOTTOM Select with or then <ENTER> <EXIT> to return. Top-Bottom (north-south) Adjustments Top-Bottom and center adjustments affect only the horizontal lines of the projected image.
6-13 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. H size too large H size too small Ideal image width Seagull Correction Use this correction after the image has been adjusted with top and bottom bow and keystone.
6-14 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
6-15 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. BLANKING TOP BOTTOM LEFT RIGHT Blanking Adjustments Blanking adjustments a.
6-16 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. 25 23 9 15 17 24 22 8 14 16 5412 3 20 18 6 10 12 21 19 7 11 13 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
6-17 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. COARSE CONVERGENCE Select with or then <ENTER> <EXIT> to return. HORIZONTAL SIDES VERTICAL CORNERS Select with or then <ENTER> <EXIT> to return.
6-18 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode.
Service Mode 7-1 5975688 BARCOVISION 1609s 131097 7 Select with or then <ENTER> <EXIT> to return. Starting up the Service mode. Use the control disk to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when the password function is active).
Service Mode 7-2 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or <ENTER> to copy <EXIT> to return. Identification Highlight 'Identification' with the control disk and press ENTER .
Service Mode 7-3 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or <ENTER> to copy <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Deletion of all blocks Highlight 'delete all blocks' with the control disk and press ENTER .
Service Mode 7-4 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
Service Mode 7-5 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. SERVICE MODE IDENTIFICATION COPY A BLOCK DELTE A BLOCK DELETE ALL BLOCKS CHANGE PASSWORD CHANGE LANGUAGE RUN TIME SET TO MIDPOSITION CONVERGENCE MID DYNAMIC ASTIGMATISM MORE.
Service Mode 7-6 5975688 BARCOVISION 1609s 131097 Spo t s hapes bef ore dy nami c asti gmati sm correc ti on Spot sha pe s a fte r dy n a m ic asti gmati sm correcti o .
Service Mode 7-7 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
Service Mode 7-8 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Projector Warm Up Highlight 'Projector Warm Up' by pushing the control disk up or down and press ENTER to select the projector warm up menu.
Messages, warnings and failures 8-1 5975688 BARCOVISION 1609s 131097 8 MESSAGES, W ARNINGS AND F AILURES When selecting a new source, information about this source will be displayed on the screen. Source number, horizontal and vertical fre- quencies of the displayed source.
Messages, warnings and failures 8-2 5975688 BARCOVISION 1609s 131097 FAILURE RCVDS com- munication error Serial communication error be- tween the RCVDS and the projec- tor. FAILURE IRIS commu- nication error WAIT starting up IRIS Message during the start up of the IRIS.
9-1 5975688 BARCOVISION 1609s 131097 Options 9 IR Receiver 800 This infrared receiver unit makes it possible to control the BARCOVISION 1609s from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS05.
9-2 5975688 BARCOVISION 1609s 131097 Options MAGIK Interface Multifuctional Analog Graphics Interface Kit. BARCO's MAGIK interface allows the user to connect a presentation device such as a projector or a professional monitor to any computer with analog video signal with or without maintaining the connection with its own display.
Orbiting A-1 5975628 BARCOGRAPHICS 1209s 010797 A <EXIT> to return. MASTER ORBITING CHANGE TO SLAVE MODE : ON SPEED : FAST ADJUST DEVIATION SELECT WITH OR THEN <ENTERN> DEVIATION ADJUST : VERTICAL WITH OR HORIZONTAL WITH OR <EXIT> to return.
Orbiting A-2 5975268 BARCOGRAPHICS 1209s 010797 Orbiting Speed Toggle (only in MASTER Orbiting) Highlight 'SPEED : SLOW' with the control stick and press ENTER to set the ORBITING SPEED to Fast. Highlight 'SPEED : FAST' with the control stick and press ENTER to set the ORBITING SPEED to Slow <EXIT> to return.
Orbiting A-3 5975628 BARCOGRAPHICS 1209s 010797 Adjustment procedure multiple projector installations : Inportant : to allow corrections in the deviation alignments of the slave projectors, never adjust the deviations of the master projector to its maximum.
Orbiting A-4 5975268 BARCOGRAPHICS 1209s 010797.
Adjustment Blocks and Source Numbers 90-99 B-1 5975688 BARCOVISION 1609s 131097 Adjustment Blocks (memory blocks) As the projector is digitally controlled, all geometry and convergence adjustments are stored in the projectors memory as nume ric values.
Adjustment Blocks and Source Numbers 90-99 B-2 5975688 BARCOVISION 1609s 131097 The alternate adjustment block for sources 0 - 9 (projector with RCVDS) or 1 - 5 (stand-alone projector) is activated by selecting the corresponding source number 0 - 9 (projector with RCVDS) or 1 - 5 (stand-alone projector).
Insert Card i-1 5975628 BARCOGRAPHICS 1209s 010797 3 INSERT CARD.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Barco R9002249 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Barco R9002249 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Barco R9002249, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Barco R9002249 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Barco R9002249, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Barco R9002249.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Barco R9002249. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Barco R9002249 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
