Manuel d'utilisation / d'entretien du produit 3 du fabricant Barco
Aller à la page of 43
Cl i ckS h a r e User Guide R5900001/03 21/11/2013.
Barc o nv President Kennedypark 35, 8 500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.
Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fi tness for a particular purpose.
4. Barco shall hold you harmless, defend and indem nify you from and against direct damages, losses and ex penses arising from in- fringement or alleged infringement of any patent, trademark or copyri.
9. This Software License is t he only understanding and agreement between you and Barco for use of the Software by you and/ o r Autho- rized Users. The Software License supersedes all other communicat.
EACH SEP ARA TE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELA TED DOCUME NT A TION ARE PROVIDED "AS IS" WITH- OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED T O, THE IMPLIED WARRANTIE S OF ME RCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE.
Open So urce component Open Source Licens e gdbserver http://www .gnu.org/licenses/lgpl.html grub http:// w ww .gnu.org/licenses/lgpl.html gstreamer http:// w ww .gnu.org/licenses/lgpl.html hdparm http://opensource.org/lic enses/BSD -3-Clause hostapd http:// opensource.
Open So urce component Open Source Licens e libstdc++6 http://www .gnu.org/licenses/gpl.html libtalloc2 http:// www.gnu.or g/licenses/lgpl.html libusb http:// www.gnu.or g/licenses/old-licenses/l gpl-2.1.html libxml2 http://opensource.org/licenses/MIT libz1 Free license lighttpd http: //opensource.
Open So urce component Open Source Licens e udev http://www .gnu.org/licenses/old-licenses/gpl- 2.0.html update-modules http://www .gnu.org/licenses/old-li censes /gpl- 2.0.html update-rc http:// w ww .gnu.org/licenses/old-li censes/gpl-2.0.html usbutils http:// www.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditi ons: 1. this device may not cause harmful interference, and 2. this device must accept any interf erence received, including interference that may cause undesired operation of the device.
Déclaration d’antenne d’Industrie Canada (IC) Conformément à la réglementation d’Industr ie Canada, le présent émetteur radio peut foncti o nner avec une antenne d’un ty pe et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industr ie Canad a.
.
Tabl e of con tent s T ABLE OF CON TENTS 1 . I n t r o d u c t i o n ..... ...... ...... ...... .... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... 3 1 . 1 V e r s i o n s ............................ ......
Tabl e of con tent s 2 R5900001 CLICKSHA RE 21/11/2013.
1. Introdu ction 1. INTROD UCTION Overview • V ersions • About this guide • Symbols and fonts 1.1 V ersions Regional versions Depending on the location where you buy the ClickShare product, the Base Unit and accessories are regionalized.
1. Introduc tion Dependin g on the Cli ckShare ver sion, some graph ics might be d iffer ent to the o nes used in th is manual. This however does not have any effect to the functionality . The User Guide describes how to use ClickShare. It also contai ns a basic troubles hooting part where you can search for a solution when a problem occurs.
2. Introduction to Cl ickShare 2. INTROD UCTION T O CLICKSHARE Overview • About the ClickShare product • About the Base Unit • About the Button • About the Tray • Mobile Device Support 2.1 About the ClickS h are product Cli ckShar e sets ClickShare makes connecting to the meeting room’ s video system a matter of clicking a Button.
2. Introductio n to ClickS hare Regional v ersion Contain s Accessories included R9861005JP • R9861006BJP • 4x R9861006D01 • R9861006T01 • power cable JIS C8303 • wall/ceiling mounting brack.
2. Introduction to Cl ickShare 2 1 3 2 Image 2-3 T h eB a s eU n i t 1 USB port 2 S tatu s LED s trip 3 Standby Button Ta b l e 2 - 3 USB Port The USB port is used to update the software of both the Base Unit and the Buttons. When plugging in the Butt on into the Base Unit, the Butt on is paired to the Base Unit.
2. Introductio n to ClickS hare 2.3 About the Button Button functionality By default, the ClickShare Set comes with four Buttons. A B utton contains three main functional components. 1 2 3 Image 2-4 The Button 1 USB connector 2B u t t o n 3L E D r i n g Ta b l e 2 - 5 Handle the Button cable with care.
2. Introduction to Cl ickShare 2.4 About the T ray T ray functionality The function of t he Tray is to hold t he Buttons on the table when the meeting has fi nished.
2. Introductio n to ClickS hare 10 R5900001 CLICKSHA RE 21/11/2013.
3. Getting S tarted 3. GETTING ST ARTED Overview • Powering the Base Unit on and off •B a s i c U s e • Advanced Use • Use of an iOS device with ClickShare Link • User Interface • Capture mode • Shared desktop: primary - extended •A u d i o c o n fi guration • Pairing 3.
3. Get ting Star ted Image 3-2 Standby but ton The system is now powered on . T o put the Base Unit in standby mode or awake it 1. Push the standby button shortly . Refer to image 3-2. Note: If you plug i n a Button into your laptop and connect to i t, the Base Unit automaticall y wakes u p from st a ndby (enable it s display output).
3. Getting S tarted Image 3-3 Starting t o use ClickShare is now very simple. T o start using ClickSh are 1. T ake a Button out of t he Tray . Image 3-4 2.
3. Get ting Star ted Image 3-5 The LEDs of the Button start fl ashing whit e. On your laptop a new drive appears. T wo situation are possible now: - A launcher is preinstall ed on your laptop (downloaded from th e Base Unit or Barco website, or deployed com pany-wide by your IT department).
3. Getting S tarted The ClickShare client software starts and its icon appears in the system tray . On a Windows com puter: On a Macint osh: When the sys tem is ready for use, a message appears close to the systray icon. Image 3-8 The LEDs of the Button are stat ic white.
3. Get ting Star ted 1 user 2 users 3 users 4 users 1 1 3 1 2 12 12 34 Image 3-10 Positi on on Dual screen One display must support D isplay Port, otherwise an adapter piece from display port to DVI must be used.
3. Getting S tarted Y our content is shown full s creen on the display . If other per sons were sharing their content on the display , their screens are removed.
3. Get ting Star ted Connection via Apple TV As per the above but c onnect the ClickShare Link input t o the Apple TV instead of the i OS dev ice. 1. Connect to the appropriate network and start sharing by enabling AirPlay m irroring . For more information on how to setup, consult the iOS device’s user guide.
3. Getting S tarted How to change 1. Right click on the ClickShare icon in the system tray (1). Image 3-17 Change capture mode A context menu opens. 2. Click Capture mode to toggle. Checked: capture with more detail s but may have a lower perf ormanc e.
3. Get ting Star ted 2 1 2 2 Image 3-19 PC with one extended screen connected. That extended screen will be captured and displayed on t he meeting room display . 3 1 2 2 Image 3-20 PC with two extended screens connected. The fi rst extended screen, sc reen 2 will always be captured and displayed on the meeting room display .
3. Getting S tarted Image 3-22 Shared de sktop selec tion A context menu opens. 2. Select Shared Des ktop (2). 3. Select the desired setting (3). Primary : the primary PC screen is displayed on the meeting room display . Extended always the secondary screen is displayed on the m eeting room display .
3. Get ting Star ted Image 3-23 Speakers Cl ickShare, defaul t 2. Click Playback devices (2). The Sound window opens on the P layback tab. 3. Select Speakers ClickShare (3) and click Set default (4). 4. Click Apply or OK to activate the new setting. Set ClickShare as default in Windows XP 1.
3. Getting S tarted 2. Click Adjust A udio Properties (1). The Sound and Audio Devices Properties window opens. 3. Select Audio tab (2). 4. Click on the drop down box in the Sound playb ack pane and select ClickShare (3).. 5. Click Apply or OK to activate the new setting.
3. Get ting Star ted A Button can only be paired to one Base Unit at a t ime. The Button will always make connection to the Base Unit it was last paired to. T o pair a Button to the Base Unit 1. Insert the Butt on in the USB port at the fr ont of the Base Unit y ou are using.
3. Getting S tarted Image 3-29 Unplug But ton from Base Uni t The Button is now ready for use. R5900001 CLICKSH ARE 21/11/2013 25.
3. Get ting Star ted 26 R5900001 CLICKSHA RE 21/11/2013.
4. Tr oublesh ooting 4. TROUBLESHOOTING 4.1 Basic T roubleshooting Problem solving In this c hapter some problems that might occur while us ing ClickShare are listed. For each problem possible c auses are given and a solution is proposed. If you cannot so lve the problem yourself, please contact your local IT administrator .
4. Troub leshooti ng Probl em Cause Sol ution No automatic refresh of drives. Refresh the vi ew on your laptop. Bad connection at USB port on lapt op. • Reconnect to the USB port. • T ry another USB po rt. • Reboot your laptop. After inserting t he Button into your laptop, you cannot fi nd the ClickShare drive.
5. Environmen tal informat ion 5. ENVIRONMENT AL INFORMA TION 5.1 Disposal informati on Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, un de.
5. Environm ental info rmation 底架 Cha ssis x 0 x 000 电 源供 应 器 Power Supply U nit x 0 x 000 文件 说 明 书 Paper Manuals 000000 O: 表示 该 有毒有害物 质 在 该 部件所有均 质 材料中的含量均 在 SJ/T 1 1363-2006 标 准 规 定的限量 要求以下 .
Index INDEX A About 3, 5–6, 8–9 Base U nit 6 ClickShare 5 ClickShare product 5 The Butt on 8 Tr a y 9 User Guide 3 About ClickShare 3 About the Tray 9 Address 30 Advanced use 15 Audio control 21 B.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Barco 3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Barco 3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Barco 3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Barco 3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Barco 3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Barco 3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Barco 3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Barco 3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
