Manuel d'utilisation / d'entretien du produit RM-406 du fabricant Stanton
Aller à la page of 21
RM.406 Professional DJ Mixer : : : AB AB AB A B LR ST ANTON MAGNETICS, Inc. information@stantondj.com © 2004 Stanton Magnetics, Inc. OWNER’S MANUAL.
Please read carefully before use of this product Failure to follow the instructions printed below may void warranty • Follow all security advice printed on your mixer • When removing the unit&apos.
Congratulations and thank-you for purchasing the latest addition to the grow- ing Stanton family . Sporting a new attitude, and a fresh, modern look, the RM.406 is a 4-channel, rackmount mixer loaded with features and innova- tions giving club and mobile DJs a complete, powerful, yet simple tool to mix, create, and perform their best.
The controls and functions of the RM.406 are grouped in alphabetical sec- tions (clockwise from upper right corner) for your reference and then listed numerically for more detail.
RM.406 T op Panel (FUNCTIONS) A 1 2 Section A: Output Meters 1. Meter Switch: Switches the display of the Level Meter (#2) between Master or Zone output signals. 2. Level Meter: Displays the left and right Master or Zone output level of the mixer . Red indicates clipping.
RM.406 T op Panel (FUNCTIONS) Section C: Output Controls C LR 6 7 8 9 10 11 6. Master Level: Controls the overall output level of the audio signal sent through the Master connectors (see Output Connections.) 7. Stereo/Mono Switch: Switches the Master output between a stereo or mono signal.
RM.406 T op Panel (FUNCTIONS) Section D: Cue Controls D 15 16 17 12 13 14 12. Cue FX: Sends the effected signal from the FX Loop to the Headphone Cue for monitoring (see Section-B.) This allows DJs to hear what the FX Loop sounds like, before sending it to the Master Outputs.
RM.406 T op Panel (FUNCTIONS) Section E: Crossfader Controls E 18 19 20 21 18. Fader Start (A): Activates this side (A) of the Crossfader (#19) for use with com- ponents with the Fader Start feature. Moving the crossfader away from the left-most position will cause the device (CD / T urntable) to start playing.
RM.406 T op Panel (FUNCTIONS) Section F: MP3/Aux In F 22 22. MP3 / Aux. Input: This 1/8" Mini-jack (3.5 mm) input was designed for easy access and connectivity to a variety of portable devices (portable MP3 / mini-disc / CD players / iPods.) Use this input instead of having to re-wire the back panel of the mixer or use adapters.
Section G: Mic Controls (continued) 23. Mic-1 XLR Input: Primary connection for a standard balanced (XLR) microphone. 24. Mic-2 XLR Input: Secondary connection for a standard balanced (XLR) microphone. 25. Mic-1 1/4" Input: Primary connection for a standard unbalanced (1/4") microphone.
RM.406 T op Panel (FUNCTIONS) Section H: Channel Controls (each channel has its own controls which are duplicated for channels 1-4) AB H 34 36 38 43 42 41 35 37 39 40 34. Input selector switch: Selects phono or line input for the corresponding channel.
RM.406 T op Panel (FUNCTIONS) Section H: Channel Controls (continued) this setting too high may result in a loss of sound quality (distortion.) [Note: For best results set this control in the number 7 (2 O'Clock) position for unity gain. If further adjustment is needed, this is a good reference point.
RM.406 Rear Panel (FUNCTIONS) K L I J M N O P Q R Section I: Power Section J: Master Output Section K: FX (Send & Return) Section L: Zone Output Section M: Sub Output Section N: RCA Outputs Section O: Channel 4 Inputs Section P: Channel 3 Inputs Section Q: Channel 2 Inputs Section R: Channel 1 Inputs Section I: Power I.
RM.406 Rear Panel (FUNCTIONS) Section J: Master Output J. Master Output Connection: These Right & Left XLR connections are used for the Master Output signal. V olume levels for this output are controlled by the section C front panel controls. NOTE: The TRIM knob sets the maxi- mum volume allowed for this output (be sure it is set properly .
RM.406 Rear Panel (FUNCTIONS) P . Channel 3 Input Connections: This group of connections are ALL inputs which are only routed to channel 3 (select input using section H, (#34) from top panel.) Only two lines (L3, L7) and one phono (PH3) OR CD can be used as inputs here (the select switch located here toggles between PH3 / CD.
This is a typical setup you’ll find in many nightclubs: 2 turntables, 2 CD play- ers, plus a microphone for the DJ. Here’s how you would set up your equip- ment with the RM.406: 1. Be sure all equipment is powered “OFF” and all of theRM.406’s Channel faders and Level knobs are at minimum volume.
Superior Sound T echnology The audio quality of the RM.406 is nothing short of revolutionary for DJ mix- ers in its price class. The RM.406 was designed by Stanton’ s new product development team, s.
T echnical Specifications Line Inputs.................................................................................7 x 2 (RCA) , -10 dBV / >10 kOhm 1 (1/8” stereo mini-jack), 10 dBV / >10kOhm Phono / CD Inputs...............................
T roubleshooting Problem / Symptom Possible Cause/ Solution No Sound Is the power on? Check the power switch. Make sure the channels are assigned properly to the crossfaders. Make sure INPUT GAIN is turned up and output level control is turned up. Depending on the input, check the rear panel selector switches.
T roubleshooting Sound is distorted Phono Input Only plug turntables into this input, do not plug in CD players or other Line Level sources. T urn down the INPUT GAIN CONTROL. Check the EQ settings. I hear hum. Make sure you are using good shielded audio cables.
Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W arranty Through Stanton’s authorized dealers around the W orld, Stanton, or one of Stanton’s authorized dis- tributors outside the U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Stanton RM-406 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Stanton RM-406 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Stanton RM-406, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Stanton RM-406 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Stanton RM-406, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Stanton RM-406.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Stanton RM-406. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Stanton RM-406 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
