Manuel d'utilisation / d'entretien du produit 4HD du fabricant Speco Technologies
Aller à la page of 93
User Guide (V er . 1.3 ) Model: DVR4HD 4 Channel HDcc tv Digit al V ideo Recorder About This Use r Guide Prior to inst allation, ca refully read the use r g uide.
2 Safety Precauti ons Explanation of Graphi cal Symbols WARN ING To reduce a ris k of fire or electric shoc k, do not expo se this product to rain or moisture . CAUT I ON Changes or modifica tions not expressly approved by the manu facturer may v oid the user ‟s authority to operate this equi pment.
3 The se Precaut ions Must B e Followed For Sa fety Reasons. Warnin g Do not use if the unit emits smo ke, strange sou nds are heard, or odo r is emitted. Make sure the power cab le is not damaged . Make sure the re is no dust ac cumulation on the pow er plug or the outlet.
4 Warning Install ation and servi cing should be per formed only by qualified and experien ced personnel. T urn of f the power of the DVR w hen connecting cameras, audio or sensor cabl es. The manufacturer is not r esponsibl e for any damage caused by improp er use of the product or failure to follow instructions for the produc t .
5 Basic Function o f the MOUSE ① : Lef t button: SELE CT function ② Right button: Go to Sub M enu ① : Double clic k: Change Full Screen or S plit Screen Mounting the Hard Disk 1.
6 2. Fix the supplied HDD mounting brac ket to the har d disk using the supplied moun ting brac ket screws. 3. Insert the HDD brac k et to the hole and fix the screw . 4. Connect the supplied SA T A cable and pow er cable to the hard dis k . NOTE) HDD should be connected in the following order; HDD1/ O DD, HDD3, HDD4, HDD5, HDD6, HDD7, HDD 8.
7 Specification ITEM Specification Video Input Channel Input Lev el 4 Channel HDc ctv 720p Video Lo ss Check YES Output Main Mon itor Output HDMI Sub Monitor Ou tput VGA S pot 1 Channel S pot Audio Input 4 RCA Output 1 RCA Audio Codec G .
8 S pecifications are s ubject to cha nge without no tice External S torage 1 e-SA T A SMART HDD Error Ch eck and Repor ting User Interface Menu Display Graphic User In t erface Input Method Mouse, Re.
9 Table of Cont ents 1. Name and Function ........................................................................................................... 11 1-1. Front Panel .................................................................................
10 7-3. T ransferring S till Images or V ideo from the ARCHIVE List ............................................................ 42 7-4. Play back of Backup V ideo .......................................................................................
11 1. Name and Functio n 1-1. Front Panel The follow ing information w ill help you to operate the front panel con t rols. Figure 1.1.1 . Front p anel T able 2. 1.1. Indication lamp s Name Description POWER LED light is on w hen power is applied to the sy stem.
12 Press to move right in the menu or to change the values in setup mode and to select. camera 2 in liv e mode. It is also used as the number 2 when enterin g passw ord. Press to move down t he m enu items in setup mode and to select camera 3 in live mode.
13 2. Connection Figure 2.1.1. Rea r Panel T able 2.1.1. Rear Panel Con nections NO Connection Purpose 1 VIDEO IN 4 BNC connectors for video in put. (HDcctv / HD -SDI) 2 A UD IO IN 4 connectors for audio input. 3 A UDIO OUT 1 connector for audi o output.
14 UNIT ID Reserve PIN for additional f eature 11 ETHERN ET RJ -45 connector for n etw ork function 12 E-SA T A T o archive still-image or video into an external storage HDD. Raid nits to be avai lable in the future . 13 Input V oltage Select input volt age acco rding to local electricity st andard 14 POWER SOCK ET Connect for AC1 10V~250V 3.
15 T able 3.1.1 . S etup Men u T ree DISPLA Y – OSD – OSD CONTRAST – SEQUENCE – SEQ -D W ELL TIME – CHANNEL - NA ME RECORD – CHANNEL - RESOLUTION - FRAME RA TE - QUALITY - RECORDIN.
16 – SET DA TE & T IME – NTP – SEND EMAIL SECURITY – USER AUTHENTICA TION – USER P ASSO W RD NETWORK – PORT – W EB POR T – NETWORK TYPE (DHCP , ST A T IC) – DNS – DDNS .
17 3-2. Setup – Display Mode Press the SETUP button and enter t he passw ord. The setup menu is display ed as picture belo w . Select DISPLA Y icon and press SEL button to enter the setup menu item.
18 Figure 3.3.1. Rec ording Mode Setup Screen T able 3.3.1. Menu Items in Recording Mode Setup Menu item Description CHANN EL Select a channel for applying the following settings using the control button ( ◀ ▲ ▶ ▼ ). Press SEL button to change the setting value of all channels at once.
19 RECORDING Assign the recording mode for each channel. Options are: Continuous , B y Motion , B y Sensor , B y Schedule or Disable . SENSOR RECORDING Enable setting up to 4 sensors for the specified channel using the control button ( ◀ ▲ ▶ ▼ ).
20 setting for ev ery day . [ SUN to SA T ]: Move the cursor t o SUN to SA T and select a recording mode C,M or S using t he SEL button to set the same setting for the whole day . [ V ertical Bar “ | “ ]: Move the cursor to ALL and move the cursor to the specific time using the control button ( ◀ ▲ ▶ ▼ ).
21 Control the motion sensitivi ty from 1 to 9. KEY T O NE Enable/disabl e key tone. REMOTE CONT ROL ID Select an ID of remote c ontrol. 1. Select ID. 2. Press the same number as ID set in DVR on a remote contro l. 3. Then icon will be displayed on Live screen of DVR that respond to the re m ote control.
22 ② P ress SEL button or dou ble click to ente r the menu. Then PTZ menu scree n is displayed. Figure 3.4.3. PT Z Control Setup Screen Note : For speed dome cameras that support RS-485, connect them directly to the RS -485 port. If the camera is controll ed with RS-232C, use a RS -485 to RS-232C signal converte r .
23 FULL ZONE : The motion sensor is activ e on the w ho le screen. P ARTIA L ZONE : The m otion sensor is a ctive in the set detection fra me. Select the senso r detection posi tion using the control bu tton ( ◀ ▲ ▶ ▼ ) and press the SEL button.
24 T able 3.5.1 . Menu Items in ST OR A GE Setup Screen Item Description OVER WRITE W hen enabled, the DVR will continue recording and overw r ite t he oldest existing recorded data once the hard drive is full.
25 3-6. Setup – System Mode Press the SETUP butto n and enter the pas sword. The setup menu is displayed as picture below . Select SYSTEM icon and press SEL button to enter the menu item.
26 SET DA TE&TIME Move the cursor to the display dat e and t ime using the control button ( ◀ ▲ ▶ ▼ ) and press SEL button to set the present date and time. Press ESC button to return to SET DA TE & TIME setup menu . In order to set DA YLIGHT SA VING , select your DLS zone from USA , EU, or OTHER.
27 3-7 . Setup – Security Mode Press the SETUP butto n and enter the passw ord. The setup menu is di splayed as picture below . Sel ect SECUR ITY icon and press SEL button to enter the setup menu item.
28 ▼ ) and SEL button. Enter the current passw ord and select OK. Enter the new password and select O K. Enter the same passw ord again to confirm and select OK. T hen the message “ PA SS W ORD CHANGED ” is display ed. The factory de fault pass word is 1111 .
29 ST A TIC Assigned t o an Internet service provider ( I SP ) to be its permanent address on the Internet. DDNS Enable/disabl e using domain nam e address through DDNS server . “ ON ” mode, DDNS serv er name appea rs for dom ain registration. DDNS SER VER NAME : T he DDNS sever name is bestddns.
30 T able 3.8.2. LAN Item Description IP The fixed IP address of the DVR unit. SUBNET MASK The subnet mas k for the LA N GA TEW A Y The IP address of the Gatew ay 1 st DNS The address for the DNS serv er 2 nd DNS The address for the DNS serv er 3-8-2-2 .
31 3-9. Setup - CONFIG Mode Press the SETUP button and enter the passw ord. The setup m enu is display ed as picture below . Select CONFIG icon and press SEL button t o enter the setu p menu item.
32 3- 10 . Setup – QUICK SETUP M ode User can easily recording setup . just select desi red day/day s to record, th en DVR w ill automatically calculate recordin g setting v alue. 4. Saving Setup T o prese rve the setup v alues that you hav e changed, selec t YES .
33 5. Live, Search, and Play back 5-1. Live Viewing Screen In the Live screen, vide o inputs from the cameras are display ed as t hey are configured in the Display Setup screen. V arious on-screen display (OSD) symbols, which indicate the status of the DVR, are described in T able 5.
34 SEA RCH Press to go to the search menu. Event search / T ime line search /Lo g /Archiv e search A RCH Press to capture a still image. The st ill image will be stored into hard drive. It can be trans ferred to the US B device. SETUP Press to launch SETUP menu.
35 How t o Search Dat a On the Time-Line Usi ng the Mouse or Front Key Button ① 1 hour moving : 1-hour time bar(M ouse)/ F/REW and F/ADV button (Front key) ② 5 minu te moving : ◀ 12:00:00 ▶ (Mouse) / control button ◀ ▶ (Front key) 5-2-1.
36 1. Select the date of the video to begin searching and navigate throu g h the days usin g the control button ( ◀ ▲ ▶ ▼ ). 2. Once you have selected the date, press the SEL button to move to the tim e line search w indow . 3. Use the control bu t ton ( ◀ ▲ ▶ ▼ ) to select a ti me zone on the 24 hours time t able.
37 6. Once you have selected the t ype of recording to search for , press SEL to produce a list of instances that fit your sea rch criteria. 7. Use the control bu t ton ( ◀ ▲ ▶ ▼ ) to scroll through the on-screen li stings.
38 5-3. Play mode During playba ck of a rec orded event, the m ode changes fr om SEARCH to PLA Y . W hile in PLA Y mode, you may return to the SEARCH screen by pressing t he ESC button.
39 6. P TZ Control T o control the PTZ functions of t he camera, select MEN U and PTZ on the screen using the mouse or press the PTZ but ton on the fron t panel .
40 User can set the p r eset number in the tour group of the OSD m enu. OSD Select the OSD to enter the menu. Cont rol keys are Right, Left, UP , Do wn, Select, Far (REW KEY), and Near ( FF KEY) . Press the ESC button to return to the main menu. Press the PTZ b utton to escap e from the OSD menu.
41 7. Back Up 7-1 . S till Image Backup onto USB Flash Driv e S till images can be capt ured and archived onto the USB flash drive in live mode or whil e playi ng back recorded vide o. In live mode, press t he BACKUP button to launch the archiv e function or select MENU and BAC K UP on the screen using the mo use.
42 Figure 7 .2 .1 . Video A rchiving and Backup Scre en T he DVR wi ll convert the correspondi ng portion o f the vi deo into an A VI file. 7-3. T ransfe rring Still I mages or Video from the ARCHIVE List The stored data on t o hard driv e will be found in the ARCHIVE list in SEA RCH window .
43 Figure 7.4.1 . HD Player.
44 8. Upgrading Firmware In order to upgrade , the firmware upgrade file must first be downloade d and copied into the USB flash drive . Create a new f older in the USB f lash drive and name it “upgrade” . Copy the firmware upgrade f ile into the “upgrade” folder .
45 9. Network A ccess Using the Single-Site N et work V iewer The DVR provides a live r emote monitorin g feature. Remote m onitoring requires installatio n of the network view er on your PC. NOTICE In a high bandwid th network, a maximum of four users can access one DVR simultaneously .
46 4. The setup sta tus screen is displayed . After the ins tallation is completed, “ S pecoT ech Client ” icon is display ed on t he des ktop. 9-3.
47 Button Function Description DA TE & TIME Displays the cu rrent date and time. CONNECT / DISCONNECT Connect/disconnec t networ k connection.. SEA RCH Switches the liv e m ode to search mode. DISPLA Y MODE Select a channel and screen display mode.
48 QUAD/-screen displ ay - Cli ck the QUAD button t o switch to qua d-screen displ ay Full screen display - Click the r ight button o f the mouse and choose the Full Scr een butto n to display only screen and hidden the operation p anel.
49 9-4 . Bi -Directional A ud io T he UM S Clien t allows f or bi direc tional audio between the client and a dvr unit. On the PC, to use bi directional audio, you will need a sound card of handli ng a microphone and speakers.
50 MARK IN Set the star t t ime for video backup. MARK OUT Set the endin g time for vi deo backu p. BACKU P Backup the selected recorded video as A VI format. SEA RCH CALENDA R The calen dar show s dates with recorded video in a light blue and the selected date in dark blue.
51 3. Drag the slid on the time scal e and drop it betw een 0 to 24. 4. Press the PLA Y butt on. Then the video recorded in the remote DVR is played back per each channel that you choose by HD image... Backup of V ideo in the Remote DVR V ideo recorded in the remote DVR cab be backe d up on the PC HDD as A VI format.
52 S tart time / S top time: Backup time can be chan ged. File path: Shows the fol der that the bac k up file is recorded . Channel: Show s backup channel .. 9-6. PC System Configuration Click the SE TUP button. T hen the Setup dialog is display ed.
53 Display network statis tics : If a user selects this function, the client S/W will display network status, Bit rate and Fra me rate. T ime Format : Change the mode the Clien t software di splays the time . Setting Site The remote DV Rs can b e added, modified, and remove d.
54 Setting Record Set the recordin g conditions and select channels to record . Select the local disk to use and the amount of disk space you want to allow the progra m to use for recording.
55 10. Network A ccess Using the M ulti-S ites N et work Vie wer 10 -1. Inst al ling the Network Sof tware 1. Insert the prov ided CD in the CD drive and doubl e-click “ S pecoT ech_HDcctv_M ulti_Client (XXXX) .exe ” 2. Select a destination folder and click “ Next ” .
56 5. Afte r the instal lation is compl eted, “ S pecoT ech Multi C lient ” icon display s on t he des ktop screen. 10 -2. Live Window When install ation is com pleted, double click the “ SpecoT ech Multi Client ” icon on your desktop to start the program.
57 SITE MA NAGEME NT THUMBN AIL REFR ESH: Click this icon to refresh and renew thumbnail image o f every connected site. SITE ADDITION: Click this icon to open „ Site Addition ‟ window . SITE DELETE: Click this icon to delete site from the index window , after discon nect a site.
58 CHANN EL SPLIT T o select the numbers of display channel /channels (Single, quad, 9 channels, and 16 channel s) of highlighted site. DVR SITE SPLI T T o select the numbers of DVR/DVR s (1 DVR, 4 DVRs, 9 DVRs, 16 DVRs) on main display screen. 10 -3.
59 10 -3-2. Main control pan el Button Description LOCAL PLA YBACK Click t his icon to run a playback window t o search and play videos that are recorded i n local PC. REMOTE PLA YBACK Click t his icon to run a playback window to search and play videos that are recorded i n remote DVR.
60 Directory w indow show s site/sites that are pre-regi stered. CONNECT Cli ck this icon to connect the selected si te/sites. DISCONNECT Click this icon to disconnect the s elected site/si t es. SETUP Click this icon to setup c onfiguration of UMS MUL TI CLIENT .
61 The calendar show s dates with recorded vi deo in color . T o display the record ed data o f selected channel or all channels on a time line scal e. T o change a time line scale from 24 hours to 60 minutes or vise versa. The timeline shows recorded data in color on the bar .
62 10 -4- 1. General 10 -4-1-1. Security Option: Set a p assword for security options. Select security options and set a p assword. Then when y ou access any of selected functions, you need to enter the p assw ord. Y ou can also set the sav e path for captu r ing and backup.
63 10 -4-2. Event Event log can be archived and sea rched. 10 -4-2- 1. A rchiving Event Log: Specify the l ocation to save ev ent logs an d select ev ent to archiv e.
64 10 -4-3. Record 10 -4-3-1. Record Setup: Y ou can set the recording conditions for Always, Event, or Auto record. And you can also select t arget DVR/DVRs and chann el/ch annels. When you set the recording condition to even t, you can set event for motion or alarm wi th duration.
65 10 -4-4 . OSD Y ou can select the OSD to be display 10 -4-5 . About “About” provides netw ork client version informa tion..
66 10 -5 . Remote Setup The menu settings for the DVR unit can be set from a PC, vi a network. This f unction will be supported to the next version. Put the cursor of the mouse on the channel which is connected to the site and press the right. Then the following wi ndow is display ed.
67 10 -5-1. Setting the Di splay Select Display t o set the liv e video display conditions 10 -5-1-1. General Settings These settin gs apply to a ll channels. OSD : Sets whether to di splay or not date and time as w ell as channel number on the screen .
68 10 -5-2 . Reco rd Select Record to set the recordi ng conditions. 10 -5-2-1. Common to A ll Channels Resolution : Set s the re solutio n for the recordings . The se t value applies to all channels. 10 -5-2-2. Channel-S pecific Settings These settin gs apply to the speci f ied channel only .
69 A udio : Sets whether to perform or not audio recor ding. Post Event Rec ord : Set s t he dura tion of the ev ent recording. Schedule : Set s the sche dule for schedule recording. 10 -5-3 . Devi ce Select Device to set the sensor inpu t/ alarm outpu t conditions , PTZ control and spot settin g conditions.
70 Sensor In : Output s an alarm signal w hen the specified external senso r input termina l receives an in put. Motion On : Outputs an alarm signal when the specif ied video input term inal receives a motion detection signal. V ideo Loss On : Outpu ts an alarm signal w hen a vi deo loss occurs in the speci fied video input terminal.
71 Setting the SPOT : Set s the ou t put conditions o f the spot v ideo terminal . S pot T ype : Sets the outpu t screen layout o f the spo t terminal. S pot On Event : Se ts whe ther to output or not the video of a sensor recording to spot while it is bein g recorded.
72 10 -5-4 . S torage Select Storage to configure continued recording settings by overwriting the hard d isk and the storage period for the recordi ng da ta. Overwrite : T o continue reco rding by ov erwriting w hen t he hard disk beco m es full, chec k the chec kbox.
73 10 -5-5 . System Select Sy stem to set system and t ime settin g s. Setting the Sy stem Client A ccess : T o g ive permission to ope rate from an external PC by checkin g the checkbox. Bandwid th Saving : Set s if the network bandwidth is not large enough when monitoring liv e videos by checking the chec k box.
74 OTHER : Sets the start and end dates of the dayli ght saving period f or time zones other t han USA and EU. (Begin/End) (Memo: A confirmation dial og is displayed when [ Apply] or [ok] is clicked if the date and /or time settings have been changed.
75 Setting the Send E - Mail : This setting is used to automa tically send a notification e-mail to a spe cified address w hen an alarm occurs. (Memo: The DVR w ill be forcibly restar ted if a value on this screen is changed.) Send E-Mail : Set s w hether to enable/disabl e e-mail sendi ng function.
76 Setting the NT P : It allows synchroni zing the ti me using an inte r net of LAN NTP server . NTP : S ets whether to synchroni ze the time u sing NTP server or not. Primary SNTP Server : Input the NTP primary serv er address. Secondary SNTP Server : Input the NTP secondary server address.
77 10 -5-6 . Securi ty Select Secur ity to set p assword check for user authentication for the speci fic functions such as SETUP , PLA YBACK, PTZ control, REC ORD OFF , PLA YBACK ON/OFF and NE TW ROK connection.
78 10 -5-7.Network Select Net work t o set information about the DVR netw ork. (Memo: If a v alue on this screen is changed, the DV R will be restarted .) Port : When connec t ing multipl e DVRs to the ne twork, set a unique por t number to each DV R.
79 10 -5-8. Network – Dual S tr eam Select Dual S tream t o set frame rate and quality for a netw ork streaming. User can set to t he followi ng values.
80 10 -6. Operation 10 -6-1. Addition, Del ete, and modify of DVR sites 10 -6 -1-1. A ddition of sites 1. Click SITE ADDITION button. And then the fol lowing wi ndow displays. o T ype : Choose the product ty pe o Site Name: Input a na me that properly describes a site.
81 10 -6 -1-2. Delete of Sites 1. Select the site /sites to delete from the di rectory w indow . 2. Click SITE DELETE button. And then the sele cted site/sites is/are deleted. 10 -6 -1-3. Modify of Sites 1. Select the site /sites to modify from the directory w indow .
82 10 -6-2. Connect and Disconnect 10 -6 2-1. Connect 1. Select site/sites to conne ct from the di rectory wind ow . 2. Click CONNECT button, and then site/sites displ ays/display as connected.
83 10 -6 -2-2. Disconnect 1. Select site/sites to dis connect from the directory window . 2. Click DISCONNECT button, and then selected site/sites discon nected .
84 10 -6-3 . S till-image capture durin g Live 1. Double-clic k a channel to capture fr om the disp l ay screen. (Otherw ise all channel s will be captu red.). 2. Click CAPTURE butto n. And then a Cap ture window displ ays. 3. Set Save p ath, File Name, and File Fo r mat.
85 10 -6-4 . Reco rding video on l ocal PC durin g Live 1. Click SETUP button. And then a setup w indow display . 2. Select Record and set the values. 3. Select Dis k and set the val ues. 4. Click RECORD ON button . And the color of button is chan g ed.
86 10 -6-5 . Local Play back and Remote Playba ck 10 -6-5-1. Play back of Recorded V id eo on Local PC 1. Click LOCAL PLA YBACK button . And then Playba ck Window display over Liv e Window . 2. Select site/sites to conne ct from the di rectory wind ow .
87 10 -6 -5-2. Play back of Recorded V ideo on Remote DVR 1. Click REMOTE PLA YBACK button. And then Play back W indow display o ver Live Window ..
88 2. Select site to connect fro m the directo ry wi ndow . 3. Clic k CONNECT button. And then Green bar displays on Search calendar and slide window . 4. Mov e scroll bar on w here there is vide o data a nd Play button. 5. Vi deo data that is reco rded on a remo te DVR is pl ay-backed.
89 10 -6-6 . A VI Backup durin g playback Y ou can back up the recorded vi deos in A VI format during play back . 1. Double-clic k the tar get channel to bac kup.
90 6. Y ou can also set the beginning time and ending time on this window . After selecting a channel for backup, click the OK but ton. The backup will begin.
91 11. Network Access Using the 3G App V iewer 11 -1. Installi ng the 3G App V iewer 1. En ter the Apple App S tore (For Apple iPhone Users) or the Android Market (For Android Ph one users) 2. Search “ S peco V iewer ” in the App S tore ⓒ or the Android M arket ⓒ 3.
92 2. Select the in t he top ri ght corner for “ Site Infor mation ” 3. Input the “ Site Informati on ” and select to save th e “ Site Infor mation ” 4. Select the saved site fro m “ My Site List ” 5. Select a channel to view . 6. After selec ting a channel, the app w ill display the following channel.
93 Notice 3G Data Usa g e applied without W i-Fi connection. Please check w ith your Phone Carrier ..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Speco Technologies 4HD c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Speco Technologies 4HD - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Speco Technologies 4HD, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Speco Technologies 4HD va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Speco Technologies 4HD, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Speco Technologies 4HD.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Speco Technologies 4HD. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Speco Technologies 4HD ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
