Manuel d'utilisation / d'entretien du produit XR-C550 du fabricant Sony
Aller à la page of 24
EN 1997 by Sony Corporation Operating Instructions FM/AM Cassette Car Ster eo XR-C550 For installation and connections, see the supplied Installation/Connections manual. Owner’s Record The model and serial numbers are located on the bottom of the unit.
2 EN W elcome ! Thank you for purchasing the Sony Cassette Player. This unit lets you enjoy a variety of features by using either a rotary remote or a wireless remote. In addition to the tape playback and radio operations, you can expand your system by connecting an optional CD/MD changer.
3 EN T able of contents This Unit Only Getting Started Resetting the unit ................................................ 4 Detaching the front panel .................................. 4 Setting the clock .............................................
4 EN Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object such as a ball-point pen. Front panel detached Note Pressing the reset button will erase the clock and some memorized functions.
5 EN Getting Started/Cassette Player Setting the clock The clock has a 12-hour digital indication. Example: Set the clock to 10:08 1 Press (SHIFT) , then press (2) (SET UP). 1 Press (4) ( n ). The hour digit flashes. 2 Set the hour. 3 Press (4) ( n ).
6 EN Locating the beginning of a track — Automatic Music Sensor (AMS) You can skip up to nine tracks at one time. During playback, press either side of (SEEK/AMS) momentarily. Note The AMS function may not work when: • the blanks between tracks are shorter than four seconds.
7 EN Cassette Player/Radio Memorising only the desired stations You can store up to 10 stations on each band (20 for FM 1 and FM 2, 10 for AM) in the order of your choice. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (MODE) repeatedly to select the desired band.
8 EN FM1 2 W_______ SUR EQ Receiving the memorized stations 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (MODE) repeatedly to select the desired band. 3 Press the number button ( (1) to (10) ) momentarily where the desired station is stored.
9 EN LST 2 WRKISS ENTER SUR EQ FM1 2 WRKISS SUR EQ Radio/Other Functions Other Functions Adjusting the sound characteristics You can adjust the bass, treble, balance and fader. Each source can store the bass and treble level respectively. 1 Select the item you want to adjust by pressing (SOUND) repeatedly.
10 EN Changing the sound and display settings You can set: • Clock (page 5) • D. Info (Dual Information) to display the clock and the play mode at the same time (ON), or to display the information alternately (OFF). • Dimmer ( Dimmer) to change the brightness of the display.
11 EN Other Functions/CD/MD Changer SEEK/AMS To locate succeeding tracks To locate preceding tracks SEEK/AMS To search forward To search backward 3 Press (SHIFT) . To cancel Auto Scroll, select “A. Scrl off” in step 2 above. Displaying the recording date of the currently selected MD Press (DSPL) for two seconds during MD playback.
12 EN Labeling a CD — Disc Memo/Custom File (CD changer with custom file function) You can label each disc with a personalized name. You can enter up to 8 characters for a disc. If you label a CD, you can locate a disc by name (page 13) and select the specific tracks for playback (page 13).
13 EN CD/MD Changer Note If you have not labeled the disc, the bank edit mode does not appear and the program edit mode appears. To go back to the normal playback mode, press (3) (PLAY MODE) for two seconds. 2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (5) (ENTER).
14 EN Additional Information Precautions • If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. • If no power is being supplied to the unit, check the connections first.
15 EN Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction.
16 EN The rotary remote labels You can control this unit with the optional rotary remote (RM-X2S). Some labels are supplied with the rotary remote. Attach that label which matches the functions of the master unit and the mounting position of the rotary remote.
17 EN Location of controls Refer to the pages for details. 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) button 5, 6, 7, 8, 11, 13 2 MODE (band select, changer select, tape transport directio.
18 EN Optional wireless remote (RM-X41) Buttons with the same functions as those on this unit. 1 OFF button 2 MODE button 3 SOURCE button 4 SEEK/AMS button You cannot do manual search and manual tuning with the remote commander.
19 EN Cassette player section Tape track 4-track 2-channel stereo Wow and flutter 0.08 % (WRMS) Frequency response 30 – 20,000 Hz Signal-to-noise ratio Cassette type TYPE II, III, IV TYPE I Tuner section FM Tuning range 87.5 – 107.9 MHz Antenna terminal External antenna connector Intermediate frequency 10.
20 EN The following checklist help you remedy most problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Problem No sound The contents of the memory have been erased.
21 EN Error displays (when an optional CD/MD changer is connected) The following indications flash for about five seconds, and an alarm sound is heard. Display Cause The disc magazine is not inserted in the CD/MD changer. No disc is inserted in the CD/MD changer.
22 EN Inde x A Automatic Music Sensor (AMS) 6, 11 Automatic Tuner Activation (ATA) 6 Automatic tuning 8 Auto-Metal 5 Auto Scroll 10 B Balance 9 Bank Play 13 Bass 9 Beep tone 10 Best Tuning Memory (BTM.
23 EN.
Sony Corporation Printed in Japan *I-3-859-453-21* (2).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony XR-C550 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony XR-C550 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony XR-C550, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony XR-C550 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony XR-C550, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony XR-C550.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony XR-C550. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony XR-C550 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
