Manuel d'utilisation / d'entretien du produit RCD-W2000ES Operating Instructions (primary manual) du fabricant Sony
Aller à la page of 44
©2003 Sony Corporation Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 T able of Contents Getting Started Unpacking ............................................. 6 Hooking Up the System ........................ 6 This Unit Can Use the Following Discs ........................ 7 Basic Operations Playing a CD ............
4 On condensation in the unit If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit.
5 Note on High-Speed Synchro-Recording When recording a CD, certain conditions may cause the sound to dropout, noise in the recording, or even unwanted tracks on the CD-R or CD-RW. If this happens, clean the CD as described in “On cleaning” above, and record to the CD-R or CD-RW using normal speed Synchro-Recording only.
6 Hooking Up the System This section describes how to hook up the unit to an amplifier. Be sure to turn off the power of each component before making the connections.
7 Getting Started Connecting the AC power cord Connect the AC power cord to a wall outlet. Notes • Be sure to place the player on a flat, horizontal place. If the player is left on a slanted position, it may cause a malfunction or damage the player.
8 Playing a CD This unit has two decks. In this manual, the CD player section is just called DECK A, and the CD-R and CD-RW recording section is called DECK B. When using the remote, set DECK A/DECK B to DECK A to operate DECK A (the CD player section), or to DECK B to operate DECK B (the CD-R or CD-RW recording section).
9 Basic Operations Playing a disc with MP3 files About MP3 files MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing audio data. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed.
10 The playback order of the MP3 files The playback order of the folders and files is as follows: Tree1 Tree2 Tree3 Tree4 Tree5 (root) Notes • This player cannot read the MP3 files if the file name does not end with the extension “.MP3”. • Folders that do not include MP3 files are skipped.
11 Basic Operations Tip To specify a desired playback order, before the folder or file name, input the order by number (e.g., “01”, “02”), then record contents onto a disc.
12 Tips • The function of AMS control changes according to the ALBUM SELECT indicator in the display. When the indicator is off, the AMS control selects tracks. When the indicator lights up, the AMS control selects albums. Press ALBUM to turn the ALBUM SELECT indicator on or off.
13 Basic Operations Using the Display You can check information about the disc using the front panel display. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. Changing the display Press DISPLAY while the unit is stopped or playing.
14 Display while recording Press TIME repeatedly while recording. Each time you press the button, the display for DECK B changes as follows: CD TOC TEXT CD TEXT CD - RW DECK A REC DISC ALBUM TRACK DEC.
15 Basic Operations Display for disc information of DECK B The indicators show which type of recordable disc is in the disc tray, and whether the recordable disc has been already finalized. The CD/CD-R/RW indicator When you put a CD or finalized CD-R in the disc tray, “CD” lights up.
16 Locating a Particular Point in a T rack Z You can locate a particular point in a track during playback or playback pause. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. During playback or pause, press and hold m / M on the remote.
17 Basic Operations Playing T racks/Discs Repeatedly (Repeat Play) Z You can play tracks repeatedly in any play mode. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. Repeating all tracks on the disc Press REPEAT repeatedly until “REP” lights up in the display, and then press H .
18 Playing in Random Order (Shuffle Play) You can have the unit “shuffle” tracks and play them in random order. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B.
19 Basic Operations Creating Y our Own Program (Program Play) You can specify the playback order of the tracks and MP3 files on a disc to create your own programs containing up to 25 steps. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B.
20 Playing Both Deck Simultaneously (Dual Play) If you have 2 amplifiers in different locations in your house, you can connect the unit to each amplifier and play two discs simultaneously on both DECK A and DECK B. The sound of DECK A is output from OUT 1 jacks and the sound of DECK B is output from OUT 2 jacks.
Recording/Editing 21 Recording/Editing Before Recording About recordable discs •A recordable disc is an audio CD-R or Audio CD- RW with the following logo. • Audio CD-Rs are recordable only one time. Audio CD-RWs are recordable for multiple times.
22 Types of Recording The following types of recordings are possible, depending on the audio source. For details on each operation, see the reference pages. a × a × × ∗3 a Same as original Adjustable with REC LEVEL * 1 Set “Make Disc” in the menu to “On” beforehand (page 36).
Recording/Editing 23 Tips • To play the recorded CD on DECK A or another CD player, perform finalization (page 30). • To record your favorite tracks from the CDs in DECK A, make a program (page 19). • If the track marks are not marked properly while making an analog recording from an external component, see page 29.
24 Notes • You cannot pause recording in Synchro-Recording. • If Repeat Play is selected, it is automatically canceled. • If Shuffle Play is selected, it is automatically canceled.
Recording/Editing 25 Normal speed Synchro- Recording The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. To use Make-Disc Synchro- Recording, set “Make Disc” in the menu to “On” beforehand (page 36).
26 X H x DECK A/DECK B INPUT REC z With the label side up To stop recording Press x . To record only your favorite CD tracks You can record only your favorite CD tracks using Program Play. Between steps 1 and 2, perform steps 1 to 4 of “Creating Your own Program (Program Play)” (page 19).
Recording/Editing 27 Turn on the indicator OPT* COAX* ANALOG* 3 Press INPUT repeatedly to select the input connector. To record through DIGITAL OPTICAL IN DIGITAL COAXIAL IN ANALOG IN * If a disc is playing on DECK A, stop playback. To record the disc in DECK A, turn off “OPT”, “COAX”, and “ANALOG.
28 Display DECK A Lvl Optical Lvl Coaxial Lv1 YES MENU/NO DECK A/DECK B . / > OVER indication OVER TOC CD TEXT CD - RW DIGITAL DECK A REC DISC ALBUM TRACK DECK B DISC TRACK Adjusting the Recording Level Adjusting the recording level for digital recording You can adjust the recording level using the menu.
Recording/Editing 29 REC z DECK A/DECK B Marking T rack Numbers While Recording You can mark track numbers either manually or automatically. By marking track numbers at specific points, you can quickly locate the points later using the AMS Function or Editing Functions.
30 DECK A/DECK B REC F ADER Fading In and Out recording (Rec Fader) Z You can gradually increase the recording level at the beginning of a recording (fade-in recording) or decrease the recording level at the end of a recording (fade-out recording). This function is convenient when you do not want the track to start or end abruptly.
Recording/Editing 31 3 Press N (or H on the remote) or YES. Finalizing starts. During finalizing, “Finalize” appears in the display and the remaining time for finalizing (may not be accurate) appears.
32 H . / > DECK A/DECK B ERASE YES Erasing T racks of a CD- RW You can erase tracks recorded on a CD-RW. This process starts with the last track on the disc. Before erasing the track, make sure that the disc is not finalized. If the disc is finalized, follow the instructions for “Unfinalizing a CD- RW” (page 31).
Recording/Editing 33 MENU/NO . / > x m / M CLEAR YES DECK A/DECK B NAME EDIT/ SELECT TOC CD TEXT CD - RW DECK A REC DISC ALBUM TRACK DECK B DISC TRACK Display Selected AB Selected ab Selected 12 TO.
34 TIME DECK A/DECK B SBM MENU/NO YES . / > Changing an existing title 1 Do steps 1 to 5 in “Labeling Tracks/ Discs” (page 33) to select the title you want to change. 2 Press and hold CLEAR until the current title is erased. 3 Do steps 6 to 8 of “Labeling Tracks/ Discs” (page 33) to enter the new title.
Recording/Editing 35 Using the Silent Pause function If there has been no sound input for about 30 seconds during recording, the unit pauses recording. If the unit continues pausing for about 3 minutes after the Silent Pause Function activated, recording stops automatically.
36 Additional Information Using the Menu You can make various settings on this unit by using the menu. When using the remote, set DECK A/DECK B to DECK B. 1 Press MENU/NO. 2 Turn AMS (or press . / > on the remote) to select the menu item, and press AMS (or YES).
Additional Information 37 Message Blank Disc Check Disc Complete! Data Disc Disc Full! Erase Ex-Change Fade In Fade Out Finalize Incomplete! Initialize Name Full! -NO DISC- No Name Messages The following table explains the messages that appear in the display.
38 Message C12/ Cannot Copy C13/ Rec Error C14/ TOC Error C41/ Cannot Copy Explanation You are trying to record a disc that cannot be played back in DECK-A or with an external device, such as CD-ROM or VIDEO CD. • Remove the disc, and then insert a music CD for playback.
Additional Information 39 Tr oubleshooting If you experience any of the following difficulties while using the unit, use this troubleshooting guide to help you remedy the problem. DECK A (the CD player section) The player does not start playing. • Insert a disc.
40 Other No sound is output. • Make the connections properly (page 6). • Operate the amplifier properly. • When using the headphones, turn PHONE LEVEL to turn up the output level. • Check the DUAL MODE setting. When the DUAL MODE is activated, the unit outputs the sound of DECK A to OUT 1 jacks and that of DECK B to OUT 2 jacks (page 20).
Additional Information 41 Specifications DECK A (the CD player section) System Compact disc digital audio system Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Playable discs CD, CD-R, CD-RW Frequency response 20 Hz – 20,000 Hz (±0.
42.
Additional Information 43.
44 Sony Corporation Printed in Malaysia.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony RCD-W2000ES Operating Instructions (primary manual) c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony RCD-W2000ES Operating Instructions (primary manual) - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony RCD-W2000ES Operating Instructions (primary manual), vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony RCD-W2000ES Operating Instructions (primary manual) va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony RCD-W2000ES Operating Instructions (primary manual), mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony RCD-W2000ES Operating Instructions (primary manual).
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony RCD-W2000ES Operating Instructions (primary manual). Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony RCD-W2000ES Operating Instructions (primary manual) ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
