Manuel d'utilisation / d'entretien du produit MHC-RXD3/GRX20 du fabricant Sony
Aller à la page of 36
1 Mini Hi-Fi Component System ©1998 by Sony Corporation Operating Instructions 3-866-217- 11 (1) MHC-RXD3 / GRX20 Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 6 Step 3: Presetting radio stations .......... 7 Connecting optional AV components ............................... 8 Connecting outdoor antennas .
4 Step 1: Hooking up the system Do the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. Getting Started 1 Connect the speakers. Connect the speaker cords to the SPEAKER jacks of the same color. Keep the speaker cords away from the antennas to prevent noise.
5 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Jack type B 3 Set VOLTAGE SELECTOR to the position of your local power line voltage (for models with a voltage selector). 4 Connect the power cord to a wall outlet.
6 2 Press = or + repeatedly to set the hour. 3 Press ENTER/NEXT. The minute indication flashes. 4 Press = or + repeatedly to set the minute. 5 Press ENTER/NEXT. The clock starts working. To change the preset time You can also change the time while the system is on.
7 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Every time you press this button, the band changes as follows: FM ˜ AM 2 Press and hold – or + until the frequency indication starts to change automatically, then release it.
8 Connecting optional A V components To the DIGITAL IN connector of the MD deck Step 3: Presetting radio stations (continued) To erase a preset number 1 Press and hold TUNER MEMORY until the preset number flashes in the display. 2 Press = or + repeatedly to select the preset number you want to erase.
9 Connecting an MD deck for analog recording Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears.
10 Playing a CD — Normal play Basic Operations You can play up to three CDs in a row. 1/u (power) 1/u (power) AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected.
Basic Operations 11 1 Press 6 OPEN/CLOSE and place up to two CDs on the disc tray. If a disc is not placed properly, it will not be recognized. To insert a third disc, press DISC SKIP/ EX-CHANGE to rotate the disc tray. 2 Press one of the DISC 1 – 3 buttons.
12 2 Press 6 OPEN/CLOSE and place a CD. Then press again to close the disc tray. If the disc number you want to record is not displayed, press DISC SKIP/EX- CHANGE repeatedly so that it appears. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback.
Basic Operations 13 Listening to the radio –– Preset Tuning Preset radio stations in the tuner’s memory first (see “Step 3: Presetting radio stations” on page 7). 1/u (power) 1/u (power) continued Preset number Frequency 1 Press TUNER/BAND repeatedly until the band you want appears in the display.
14 Recording fr om the radio Preset number Frequency 1/u (power) Tips • Pressing TUNER/BAND when the system is off automatically turns the system on and tunes in the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection).
Basic Operations 15 3 Press § and insert a blank tape into deck B. 4 Press REC. Deck B stands by for recording. The indicator on TAPE B ( (for front side) lights up. 5 Press DIRECTION repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides.
16 To Do this Stop play Press p . Pause Press PAUSE (or P on the remote). Press again to resume play. Fast-forward Press ) . Rewind Press 0 . Remove the cassette Press § .
Basic Operations 17 Recording fr om a tape You can use a TYPE I (normal) tape. 1 Press § and insert a recorded tape in deck A and a blank tape in deck B. 2 Press REC. Deck B stands by for recording. The indicator on TAPE B ( (for front side) lights up.
18 Playing the CD tr acks r epeatedly –– Repeat Play / Press REPEAT during playback until “REPEAT” appears in the display. Repeat Play starts. Do the following procedure to change the repeat mode. To cancel Repeat Play Press REPEAT so that “REPEAT” or “REPEAT 1” disappears from the display.
19 Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all the CDs in random order. 1 Press FUNCTION repeatedly until “CD” appears in the display, then place CDs on the disc tray. 2 Press PLAY MODE repeatedly until “1 DISC SHUFFLE” or “ALL DISCS SHUFFLE” appears in the display.
20 1 Press FUNCTION repeatedly until “CD” appears in the display, then place CDs on the disc tray. 2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 3 Press one of the DISC 1 – 3 buttons or DISC SKIP/EX-CHANGE repeatedly to select a CD.
21 Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. CLEAR on the remote in stop mode. CHECK on the remote repeatedly until the number of the track to be erased appears, then press CLEAR. 1 Select a disc tray with a DISC 1 – 3 button.
22 Recording on a tape manually 4 Press DIRECTION repeatedly to select A to record on one side. Select ß (or RELAY) to record on both sides. 5 Press PAUSE. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording p . Pause recording PAUSE.
23 Recording CDs by specifying the track or der — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. 1 Follow steps 1 to 6 in “Programming the CD tracks” (see page 20).
24 Selecting tape length automatically — Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Place a CD on the disc tray. If the disc number you want to record is not displayed, press DISC SKIP/ EX-CHANGE repeatedly so that it appears.
25 You can reinforce the bass and listen with headphones. To reinforce bass (DBFB) Press DBFB*. “DBFB ” appears in the display. To cancel DBFB, press DBFB so that “DBFB ” disappears from the display. * DBFB = Dynamic Bass Feedback To listen through the headphones Connect the headphones to PHONES jack.
26 To change the spectrum analyzer display Press DISPLAY/DEMO repeatedly to select one of the displays below. Pattern 1 (Changes with music) Pattern 2 Note The spectrum analyzer display changes each time you cycle through the information display (i.e.
27 2 Turn VOLUME to adjust the volume. 3 Press CLOCK/TIMER SET. “SET (DAILY1)” appears. 4 Press = or + to select DAILY 1 or 2, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. 5 Set the time to start playback. Press = or + repeatedly to set the hour, then press ENTER/NEXT.
28 To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations” on page 7) and set the clock (see “Step 2: Setting the time” on page 6) beforehand. Timer-r ecording r adio pr ogr ams 1 Tune in the preset radio station (see “Listening to the radio” on page 13).
29 To check the setting Press TIMER SELECT and press = or + to select “TUNER REC”, then press ENTER/NEXT. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT and press = or + to select “TIMER OFF”, then press ENTER/NEXT.
30 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
31 T r oubleshooting If you run into any problem using this system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
32 Troubleshooting (continued) There is severe hum or noise. • A TV or VCR is placed too close to the system. Move the system away from the TV or VCR. “0:00” (or “12:00AM”) flashes in the display. • A power failure occurred. Set the clock and timer settings again.
33 Tape Deck The tape does not record. • No tape in the cassette holder. • The tab has been removed from the cassette (see “To save a tape permanently” on page 30). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level.
34 Inputs MD IN (phono jacks): voltage 450 mV, impedance 47 kilohms Outputs MD OUT (phono jacks): voltage 250 mV impedance 1 kilohm PHONES (stereo phone jack): accepts headphones of 8 ohms or more.
35 Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range 87.5 – 108.0 MHz Antenna FM lead antenna Antenna terminals 75 ohm unbalanced Intermediate frequency 10.
36 Sony Corporation Printed in China Index N Normal Play 10 O One Touch Play 11, 14, 16 P, Q Playing a CD 10 a preset radio station 13 a tape 15 tracks in random order (Shuffle Play) 19 tracks in the .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony MHC-RXD3/GRX20 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony MHC-RXD3/GRX20 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony MHC-RXD3/GRX20, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony MHC-RXD3/GRX20 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony MHC-RXD3/GRX20, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony MHC-RXD3/GRX20.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony MHC-RXD3/GRX20. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony MHC-RXD3/GRX20 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
