Manuel d'utilisation / d'entretien du produit KV-VF21M70 du fabricant Sony
Aller à la page of 62
T rini tr on C ol or V ideo TV ©1999 by Sony Corporation KV -VF21M70 3-866-053- 31 (1) Operating Instructions Before operating the unit, please r ead this manual thoroughly and r etain it for future refer ence.
2 WARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages ar e present inside the set. Do not open the cabinet. Refer servicing to qualified personnel only . Safety information This unit operates on extremely high voltages.
3 Getting Started GB T able of Contents W ARNING Getting Started Step 1: Preparation .......................................................................................................... 4 Step 2: Installing the video TV .........................
4 Getting Started Getting Started Step 1: Pr eparation Check the supplied accessories When you have taken everything out of the carton, check that you have these items: • Remote control • T wo R6 .
5 Getting Started Getting Started Step 2: Installing the video TV Secure the video TV T o prevent the video TV fr om falling, secure it using one of the following methods: A With the supplied screws, attach the stabilizer band to the TV stand and to the rear of the video TV using the existing hole.
6 Getting Started Step 3: Connecting the antenna For better TV reception and clear r ecordings, connect an outdoor antenna to your video TV . Connecting an outdoor antenna T o connect a VHF antenna or a combination VHF/UHF antenna—75-ohm coaxial cable (round) Attach an IEC antenna connector to the 75-ohm coaxial cable.
7 Getting Started Getting Started Step 4: Selecting the language Y ou can change the menu and on-screen information language to Chinese. 1 Press ? / 1 to turn on the video TV . When the TV is in standby mode (the 1 indicator on the video TV is lit in red), press ? / 1 , PROGR +/– or a number button on the remote contr ol.
8 Getting Started Step 4: Selecting the language (continued) 4 Press M or m to select LANGUAGE/ , then press ENTER. The selected item turns red. 5 Press M or m to select , then press ENTER. The menu language changes to Chinese. T o return to the normal screen Press MENU.
9 Getting Started Getting Started Step 5: Setting the clock Y ou need to set the clock to use timer recor ding, Quick-T imer recor ding and on-timer functions. 1 Press MENU. 2 Press M or m to select , then press ENTER. 3 Press M or m to select CLOCK SET , then press ENTER.
10 Getting Started Step 5: Setting the clock (continued) 6 Press M , m or , to set the month, year , hour and minutes in the same way as in step 5 , then press ENTER.
11 Getting Started Getting Started Step 6: Setting the channels Presetting channels automatically Y ou can preset up to 100 channels. Automatic presetting is the easiest way to setup your video TV if you want to preset all r eceivable channels at once.
12 Getting Started Step 6: Setting the channels (continued) 5 Press M or m to select AUTO PROGRAM, then press ENTER. Presetting starts fr om program position 1. The pr eset program and channel numbers are displayed on the scr een in sequence. When presetting is finished, pr ogram position 1 appears again.
13 Getting Started Getting Started 1 Press ? / 1 to turn on the video TV . When the TV is in standby mode (the 1 indicator on the video TV is lit in r ed), press ? / 1 , PROGR +/– or a number button on the remote contr ol. 2 Press TUNER PRESET ON/OFF with a pointed object.
14 Basic Operations Basic Operations W atching the TV This section explains various functions used while watching the TV . Most operations can be done using the remote control. 1 Press ? / 1 to turn on the video TV . When the TV is in standby mode (the 1 indicator on the video TV is lit in red), press ? / 1 on the r emote control.
15 Basic Operations Additional tasks T o Press T urn off temporarily ? / 1 on the remote contr ol. The 1 indicator on the video TV lights up in red. T urn off the main power ? / 1 on the video TV . The w indicator on the video TV lights up in orange. Adjust the volume 2 +/–.
16 Basic Operations Playing a tape This section shows you how to play a tape. Other convenient functions you can use while playing a tape are explained in “Additional Operations.” 1 Press ? / 1 to turn on the video TV . When the TV is in standby mode (the 1 indicator on the video TV is lit in red), skip this step.
17 Basic Operations Additional tasks T o Press stop playback STOP x . The video TV goes back to the normal TV pictur e. stop playback for a moment P AUSE X . Press P AUSE X again or press PLA Y N to resume playback. If you leave your video TV in pause mode, normal playback resumes after about 5 minutes to pr event tape damage.
18 Basic Operations Playing a tape (continued) Displaying on-screen information Press to display the following on-screen information. T o show only the amount of remaining tape and the linear tape counter on the screen, pr ess again. T o make the information disappear , press until no information is displayed on the screen.
19 Basic Operations Recor ding TV pr ograms Recording TV pr ograms 1 Press ? / 1 to turn on the video TV . If the TV is in standby mode (the 1 indicator on the video TV is lit in red), the video TV will turn on automatically when a cassette is inserted.
20 Basic Operations Recording TV pr ograms (continued) 5 Press REC z . The REC indicator lights up and recor ding begins. Note • Y ou can also select the channel number dir ectly with the number buttons. Press C (once for r egular channels, twice for cable channels), the desired number buttons, then ENTER.
21 Basic Operations Selecting the tape speed The chart below shows the recor ding/playback time available in each mode. P AL, MESECAM Cassette tape T ape speed setting SP mode LP mode E-30 30 min. 1 hr . E-60 1 hr . 2 hrs. E-90 1 hr 30 min. 3 hrs. E-120 2 hrs.
22 Basic Operations Recording TV pr ograms (continued) Recording using QUICK-TIMER The Quick-T imer recor ding function allows you to preset your video TV to recor d one program within a 24-hour period. For setting the Quick-T imer , use QUICK TIMER on the video TV .
23 Basic Operations 3 T urn QUICK TIMER to set the hour of the start time, then press QUICK TIMER. The hour is set and the minute of the start time turns red.
24 Basic Operations Recording TV pr ograms (continued) The QUICK TIMER button changes the following when turned clockwise or counterclockwise • When setting the start time: The hour increases or decr eases by one hour . The minutes increase or decr ease by one minute.
25 Basic Operations Changing or canceling the Quick Timer settings 1 Press QUICK TIMER. The QUICK TIMER display appears. 2 Change the settings: (1) T urn QUICK TIMER to move the cursor to CHANGE, then press QUICK TIMER. (2) Change the settings accor ding to steps 2 through 7 of “Recording using QUICK-TIMER” on pages 22 and 23.
26 Basic Operations Recording TV pr ograms (continued) Recording TV pr ograms using the timer Y ou can preset up to five programs within a one-month period. Before you begin • When the TV is in standby mode (the 1 indicator on the video TV is lit in red), pr ess ? / 1 , PROGR +/– or a number button on the remote contr ol.
27 Basic Operations 3 Set the recording start time, recording stop time, program position/input (1 or 2) and tape speed in the same way as in step 2 . 4 Press ENTER. The cursor appears at OK. For daily and weekly recor ding, see “Daily/ weekly r ecording” below .
28 Basic Operations Recording TV pr ograms (continued) Checking/adding/ changing/canceling the timer settings 1 Press TIMER REC. T o exit the PROGRAM LIST after checking the settings, skip steps 2 and 3 . T o add, change or clear the settings, follow steps 2 through 4 .
29 Additional Operations Additional Operations Adjusting the TV Adjusting the volume — INTELLIGENT VOL Some programs ar e broadcast at differ ent volume levels. By setting this function to ON, the volume level is stabilized and sudden changes in volume can be pr evented.
30 Additional Operations Adjusting the TV (continued) Presetting channels manually Preset the channels manually if you want to select channels that were not set automatically or if you want to allocate pr ogram numbers to channels one by one. 1 Press MENU.
31 Additional Operations 7 If the sound of the desired channel is abnormal, select the appropriate TV system. (1) Pr ess M or m to select TV SYS, then press ENTER.
32 Additional Operations Adjusting the TV (continued) Skipping pr ogram positions Y ou can skip unused program positions when selecting a program with the PROGR +/– buttons. However , the skipped pr ograms may still be called up when you select them with the number buttons.
33 Additional Operations Adjusting the TV system If the sound of some channels is abnormal, select the appr opriate TV system for your area. 1 Press MENU. 2 Press M or m to select , then press ENTER. 3 Make sure TV SET UP is selected, then press ENTER.
34 Additional Operations Adjusting the TV (continued) Adjusting the color system Normally set the color system to AUTO. However , when the picture has no color , manually select the appropriate color system for your area. 1 Press MENU. 2 Press M or m to select , then press ENTER.
35 Additional Operations Changing the PICTURE MODE setting The PICTURE MODE menu allows you to adjust the pictur e quality . 1 Press MENU. 2 Press M or m to select , then press ENTER. 3 Press M or m to select ADJUST , then press ENTER. 4 Press M or m to select the desired item, then press ENTER.
36 Additional Operations Adjusting the TV (continued) Adjusting the alignment of the picture The picture may be out of alignment due to influence from the earth’s magnetic field in relation to the position of the TV . Y ou can adjust the angle of the picture if it is not aligned to the TV screen.
37 Additional Operations T ape options Adjusting the tracking Adjusting the tracking automatically The tracking condition is automatically adjusted when this function is set to AUTO. Adjusting the tracking manually If streaks or snow noise appear during normal playback, adjust the tracking.
38 Additional Operations T ape options (continued) Adjusting with Adaptive Picture Contr ol (APC) This function allows you to improve playback and r ecording quality automatically according to the condition of the video tape. This function is set to ON at the factory .
39 Additional Operations Playing a tape repeatedly Y ou can play the recorded portion of a tape r epeatedly . 1 Press MENU. 2 Press M or m to select , then press ENTER. 3 Press M or m to select VIDEO SET UP , then press ENTER. 4 Press M or m to select AUTO REPEA T , then press ENTER.
40 Additional Operations T ape options (continued) Adjusting the picture for r ental tapes If you are not satisfied with the pictur e quality while playing a tape, even when APC is on, set RENT AL to ON. It is recommended to use this function when watching rental tapes.
41 Additional Operations When connecting to a Sony VCR If you use this video TV with another Sony VCR, the r emote control may accidentally operate both the video TV and VCR at the same time. T o prevent this from happening, set VHS to SONY so that the remote contr ol operates only this video TV .
42 Additional Operations T ape options (continued) Setting the color system Normally set COL SYS in the menu to AUTO. If streaks appear during playback, set COL SYS to correspond to the system that the tape was recorded in. 1 Press MENU. 2 Press M or m to select , then press ENTER.
43 Additional Operations Switching of f automatically —SLEEP Y ou can automatically switch the video TV into standby mode after a selected time period. Press . W ith each press, the time period (in minutes) changes as illustrated. One minute before the TV switches into standby mode, the message “SLEEP TIMER: 1M” is displayed on the screen.
44 Additional Operations Switching on automatically — ON TIMER Y ou can preset your video TV to automatically switch on at a desired time. Y ou can select the TV program, video playback or input source to be switched on. 1 Press MENU. 2 Press M or m to select , then press ENTER.
45 Additional Operations 9 Press M or m to set the source to be switched on, then press ENTER. The SOURCE changes as follows. TV PROG t VCR N (video playback) R If you select TV PROG, press M or m to change the channel numbers. 10 Press M or m to select ON TIMER, then press ENTER.
46 Additional Operations Sear ching using the index function The video TV marks the tape with an index signal at the point where each recor ding begins. Use these signals as refer ences to find a specific recording. This video TV can search up to 99 index signals ahead of or behind the current position.
47 Additional Operations Connecting optional equipment W atching and recor ding the picture input fr om optional equipment T o connect a video camera T o connect a VCR to video output to audio output .
48 Additional Operations Connecting optional equipment (continued) T o watch the video input signal Press t so that t 1 or t 2 appears on the scr een. A/B G-CODE COUNTER RESET t MENU REW EJECT TIMER REC ON/OFF TAPE SPEED INDEX z REC GAME 13 2 X PAUSE x STOP m FF M Z .
49 Additional Operations T o connect a video game T o display the video game screen Press GAME when the video TV is in standby mode. T o switch to a TV program Press the number button on the r emote control, PROGR +/– or t on the video TV or remote contr ol.
50 Additional Information Additional Information Self-diagnosis function Y our video TV is equipped with a self-diagnosis function. If there is a problem with your video TV , the 1 indicator flashes in r ed. The number of times the indicator flashes indicates the possible causes.
51 Additional Information T r oubleshooting If you have any pr oblems while viewing your video TV , please check the following troubleshooting guide. If the pr oblem persists, contact your Sony dealer . Symptom Possible cause Solutions TV section No picture/No sound The power cord or antenna is not connected.
52 Additional Information T roubleshooting (continued) Good picture/Abnormal sound Symptom Possible cause Solutions The TV system setting is inappropriate. • If the sound of all the channels is abnormal, display the TV SET UP menu and select the appropriate TV system (TV SYS), then preset the channels again.
53 Additional Information Symptom Possible cause Solutions Playback section Power is on, but the tape does not run. The safety device has been activated. Switch off, disconnect the AC power cord, and leave the set for about one minute. Poor playback picture The color system setting is inappropriate.
54 Additional Information Symptom Possible cause Solutions The TIMER REC indicator does not light up even though you press ON/OFF. No cassette has been inserted. The tape is at its end. No setting is made for timer recording. Insert a cassette with its safety tab intact.
55 Additional Information Identifying parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 1 i (headphones) jack 2 t 2/GAME IN jacks ( (video)/ 9 (audio)) (47, .
56 Additional Information PLAY FF PAUSE REC X M H PUSH t GAME 2 PROGR QUICK TIMER TIMER REC REC q 78 qs qd qf qg qh qj qk 9 q; qa Identifying parts and controls (continued) 7 GAME button (13, 49) 8 t .
57 Additional Information Remote control 1 % (muting) button (15) 2 EJECT Z button (17) 3 t (input select) button (48) 4 2 (volume) +/– buttons (15) 5 (display) button (16, 18) 6 ? / 1 (power/standb.
58 Additional Information Identifying parts and controls (continued) A/B G-CODE COUNTER RESET t MENU REW EJECT TIMER REC ON/OFF TAPE SPEED INDEX z REC GAME 2 PROGR 1 6 7 0C 9 4 3 2 5 8 X PAUSE x STOP m FF M Z .
59 Additional Information Specifications TV Section T elevision system B/G, I, D/K, M Color system P AL/SECAM and NTSC 3.58 /NTSC 4.43 Channel coverage See “Receivable channels and channel display” on page 60 Picture tube T rinitron 21 inches (approx.
60 Additional Information Receivable channels and channel display System Area Channel coverage Channel display B/G, H Middle East/Asia E-2 to E-12 C02 to C12 E-21 to E-69 C21 to C69 Indonesia 1A C01 2.
61 Additional Information.
Sony Corporation Printed in Malaysia.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony KV-VF21M70 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony KV-VF21M70 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony KV-VF21M70, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony KV-VF21M70 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony KV-VF21M70, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony KV-VF21M70.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony KV-VF21M70. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony KV-VF21M70 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
