Manuel d'utilisation / d'entretien du produit AV7.1 du fabricant B&K
Aller à la page of 52
B&K AV7.1 Preprogrammed & Learning Remote Control.
.
Table Of Contents 1 Page Introduction 2 Battery Installation A. How To Open and Close Battery Compartment Cover 3 B. Low Battery Message 3 Using Your Remote Control 4 A. Function Table Reference 4 Function Tables 5 B. Preprogramm ed Set-Up 8 Three Digit Code Method 8 Auto Search Method 10 Recalling the Set-Up Code 11 C.
Introduction 2 The B&K AV7.1 remote control is preprogram med to operate over 1,000 Audio and Video components so that you can set it up by simply punching in a three- digit code number that m atches your equipment.
Using Your Remote 3 This remote control uses four (4) AAA 1.5V batteries. Please be sure to m atch the batteries with the (+) and (-) markings inside the battery compartm ent during the installation.
Using Your Remote 4 A. Function Table Reference.
Using Your Remote 5 No. Button Name B&K Functions SAT Functions TV Functions 1-8 Device Name B&K (ON) Sat (ON) TV (ON) 9 Power / On On / Off On / Off ( Off) On / Off (O ff) 10 Mute Mute Mute Mute 11 Off Power Off TV / Sat TV / Video 12 VOLUME + Master Volume + Vol.
Using Your Remote 6 No. Button Name VCR Functions Cable Functions 1-8 Device Name V1 (ON) V2 (ON) 9 Power / On On / Off (OFF) On / O ff (Off) 10 Mute Mute Mute 11 Off VCR / TV Switch / A/B 12 VOLUME + Vol. Up Vol. Up 13 VOLUME – Vol. Down Vol. Down 14 CHANNEL + Ch.
Using Your Remote 7 No. Button Name CD Functions DVD Functions AUX Functions 1-8 Device Name CD (ON) DVD (ON) TAPE (ON) 9 Power / On On / Off (OFF) On / Off ( Off) On / Off (Off) 10 Mute Mute / Fader Mute / Rec. Mute 11 Off Random 12 VOLUME + Vol. Up 13 VOLUME – Vol.
Using Your Remote 8 B. Preprogrammed Set-Up The AV7.1 universal re m ote control can operate up to eight separate audio and video devices or equip m ent. To progra m the re m ote control for y our devices, please use the following steps. Three Digit Code Method 1.
Using Your Remote 9 Note: SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD.
Using Your Remote 10 Auto Search Method Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up procedure or if the manufacturer or brand for your device was no listed in the Set-Up Code Tables.
Using Your Remote 11 4. Once the correct code is confir m ed, press th e Device Butto n to store the Set-Up Cod e nu m ber. PASS will appear in the LCD. 5. Test the re m ote control for y our device. Try the POWER, CHANNEL UP AND DOWN, VOLUME UP AND DOWN buttons, etc.
Using Your Remote 12 C. Learning Set-Up The AV7.1 has the ability to learn new functions from your original remote controls: • There are 8 pages of learning with each page corresponding to the 8 Device modes on the remote control: B&K, CD, DVD, TAPE, SAT, TV, V1, or V2.
Using Your Remote 13 3. Press and hold both the Device Button selected in Step 1 and the SEL / PLAY button for approximately three seconds, until the LCD on the AV7.
Using Your Remote 14 Once you have stored the learned functions, test the buttons that have been taught. If any of the buttons do not operate as they should, please repeat from Step 1 for those buttons. Note: If the LCD shows FAIL at any time during the learning process, the AV7.
Using Your Remote 15 4. Press and hold the button on the original rem ote control that you wish to teach into the AV7.1, for approximately three seconds. The LCD on the AV7.1 will show - - - - - indicating that it is receiving information from the original remote control.
Using Your Remote 16 Erasing All Functions in One Device Mode 1. Press the Device button for the m ode to be erased. 2. Press and hold the Device and SEL / PLAY buttons sim ultaneously, for approximately three seconds, until the LCD shows LEARN .
Using Your Remote 17 D. Operation After you have programmed the rem ote control for your equipment, use the following procedures to operate your home entertainment system : 1. Press the Device Button that you wish to operate: i.e. to operate a TV, press the TV device button : to operate a VCR, press the V1 Device Button , etc.
Using Your Remote 18 Main Device Mode When the main Device Mode is displayed in the LCD, the AV7.1 will operate in a standard operating mode and all the buttons will operate the preprogram med, learned and punch through features for that Device Mode. Automatic Audio Mode The AV7.
Using Your Remote 19 Device Buttons Volume Buttons Surround Controls Macro Buttons Light Button Backlighting All the buttons and the LCD on the AV7.1 are backlit for eight seconds when the LIGHT button is pressed. The backlight is extended an additional eight seconds with any button press while the backlight is on.
Advanced Features 20 After you set-up the remote control to operate your equipment, you can also program advanced features on the remote control. The advanced features are designed to enhance the use of the remote control with your home entertainment system.
Advanced Features 21 Channel Control “Punch Through” You can program so that either the SAT or V2 Channel Controls (CHANNEL UP and DOWN) will also operate in other modes on the rem ote control. Example: Change CHANNEL UP and DOWN on your satellite while the remote is in the TV mode.
Advanced Features 22 Transport Control “Punch Through” You can set-up your remote control so that V1 or CD Transport Controls ( PLAY , STOP , FAST FORWARD , REWIND , PAUSE , and RECORD ) will also operate in other modes on the rem ote. Example: Control V1 functions while operating the remote control in the TV mode.
Advanced Features 23 Macro Buttons The buttons labeled M1, M2, M3, M4, and POW ER can be used as macro buttons . Each of these macro buttons can send out up to 15 co mm ands with the press of one button. Macro buttons can be used to turn on and off m ultiple co m ponents with one button or to directly access favorite channels.
Advanced Features 24 • “Relocating” Functions Macro Buttons can be program med to store functions from one mode and transfer them into other m odes. Example: In the B& K mode, M acro Buttons can store various functions from the TV, V1, and Satellite modes.
Advanced Features 25 Example – Memory Button Programming To program Macro Button M2 in the B&K m ode to send the following comm ands: turn on the Audio Receiver, turn on the TV, turn on a VCR, and turn on a Satellite Receiver. 1. Press the B&K Device and the MUTE button, sim ultaneously.
Advanced Features 26 C. Changing the LCD Display Twenty-five different LCD display s can be selected for each Device Mode of the remote control. To select an alternate LCD display, please use the following procedure: 1. Press and hold the Device Button for which you would like to change the LCD setting.
Advanced Features 27 D. Programming a Second TV, VCR, etc. to Other Device Buttons. This feature is used to program the rem ote control for two or more TVs, VCRs, etc. or to program a device into a mode with a different Device Button name. You can store the three-digit Set-Up Code number for any device into any other unused Device Button.
Warranty 28 The AV7.1 System Controller comes with a One-year warranty from the date of purchase. Specifications Model B&K AV7.1, infrared remote control Power Four 1.
Glossary 29 Cursor Control Buttons that correspond to the UP, DOWN, LEFT, RIGHT, SELECT, GUIDE, MENU, and EXIT functions of your audio / video equipment. Device Audio or video equipment, i.e. Television, VCR, Cable box, Audio receiver, Satellite receiver, etc.
Glossary 30 Set-Up Code The three-digit nu m ber that is used to progra m the re m ote control for y our particular m anufacturer or brand of audio / video equip m ent . Set-Up Code nu m bers are located in the table in the appendix, on pages 32 – 49 of the instruction m anual .
Appendix 31 Assignment of Audio / Video Equipment Please use the following listing to locate the correct Set-Up Code Tables for your equipment. Audio Set-Up Code Table: Audio Receivers, Preamplifiers,.
Set-Up Code Tables 32 Audio Manufacturer / Brand Set-Up Code Number ADCOM 082 092 161 225 AIWA 018 104 170 188 202 203 211 213 AKAI 138 189 AMC 125 126 127 128 ANGSTROM 142 ARCAM 141 AUDIO ACCESS 147 .
Set-Up Code Tables 33 Audio Manufacturer / Brand Set-Up Code Number MAGNAVOX 086 152 164 208 MARANTZ 028 031 040 063 185 186 251 MCINTOSH 238 MCS 076 079 MERIDIAN 100 MITSUBISHI 021 204 242 243 MONDIA.
Set-Up Code Tables 34 Satellite Manufacturer / Brand Set-Up Code Number BIRDVIEW 129 B & K 001 002* CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 DRAKE 005 006 007 010.
Set-Up Code Tables 35 Satellite Manufacturer / Brand Set-Up Code Number REALISTIC 043 074 SAMSUNG 123 SATELLITE SERVICE 028 035 047 085 SONY 103 SUPERGUIDE 020 TEE COM 023 026 075 087 088 090 107 130 .
Set-Up Code Tables 36 TV Manufacturer / Brand Set-Up Code Number 3M 152 AIWA 015 071 100 114 ARCHER 155 B & K 001 002 003* CARVER 006 008 024 027 DENON 105 227 229 DMX 156 EXTRON 151 FISHER 064 GO.
Set-Up Code Tables 37 TV Manufacturer / Brand Set-Up Code Number JCPENNY 004 008 009 024 030 065 101 143 156 160 201 JENSEN 013 JVC 034 038 070 083 145 KEC 043 KENWOOD 070 201 KLOSS 059 KMC 143 KTV 04.
Set-Up Code Tables 38 TV Manufacturer / Brand Set-Up Code Number SAMSUNG 004 050 089 101 105 127 143 160 SANYO 007 020 053 057 082 166 SCOTT 004 028 043 048 143 SEARS 004 007 015 028 030 057 082 094 1.
Set-Up Code Tables 39 V1 Manufacturer / Brand Set-Up Code Number AIWA 034 AKAI 016 043 046 124 125 142 146 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 023 039 043 B & K 001* BROOKSONIC 035 037 129 CANON.
Set-Up Code Tables 40 V1 Manufacturer / Brand Set-Up Code Number MINOLTA 013 020 MITSUBISHI 013 020 045 046 051 059 061 142 151 MTC 034 040 MULTITCH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTON.
Set-Up Code Tables 41 V1 Manufacturer / Brand Set-Up Code Number THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 079 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONC.
Set-Up Code Tables 42 V2 Manufacturer / Brand Set-Up Code Number ABC 003 004 039 042 046 053 201 AMERICAST 099 ANTRONIX 014 ARCHER 005 007 014 B & K 001* CENTURION 092 CENTURY 007 CITIZEN 007 COMB.
Set-Up Code Tables 43 V2 Manufacturer / Brand Set-Up Code Number TOCOM 039 040 056 TOSHIBA 052 UNIKA 007 014 UNITED CABLE 004 053 UNIVERSAL 005 007 014 032 035 VIEWSTAR 012 015 018 086 087 088 089 ZEN.
Set-Up Code Tables 44 CD Manufacturer / Brand Set-Up Code Number ADCOM 042 062 AIWA 059 065 088 089 105 122 170 187 AKAI 202 AMC 231 232 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 04.
Set-Up Code Tables 45 CD Manufacturer / Brand Set-Up Code Number MCS 014 073 092 MEMOREX 010 MGA 025 MISSION 107 MITSUMI 153 MODULAIRE 182 MONDIAL 147 NAD 005 006 067 NAKAMICHI 095 217 218 219 NEC 014.
Set-Up Code Tables 46 CD Manufacturer / Brand Set-Up Code Number TOSHIBA 006 067 091 148 160 VECTOR RESEARCH 080 VICTOR 004 022 114 124 WARD S 033 YAMAHA 024 046 054 YORX 182 * For Future Applications.
.
Set-Up Code Tables 48 TAPE Manufacturer / Brand Set-Up Code Number 3M 152 AIWA 015 071 100 114 ARCHER 155 B & K 001 002 003* CARVER 006 008 024 027 DENON 105 227 229 DMX 156 EXTRON 151 FISHER 064 .
Set-Up Code Tables 49 TAPE Manufacturer / Brand Set-Up Code Number TURBOSCAN 167 VICTOR 106 X-10 183 XANATECH 168 169 170 171 172 188 189 YAMAHA 021 026 031 067 * For Future Applications.
B&K Components, Ltd. 2100 Old Union Rd. Buffalo, NY 14227-2725 1-800-543-5252 www.bkcomp.com Rev 0006 ENB.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté B&K AV7.1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du B&K AV7.1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation B&K AV7.1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le B&K AV7.1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le B&K AV7.1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du B&K AV7.1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le B&K AV7.1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei B&K AV7.1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
