Manuel d'utilisation / d'entretien du produit GDM-F500 du fabricant Sony
Aller à la page of 62
CHASSIS SERVICE MANUAL SPECIFICATIONS GDM-F500/F500T9 N3P GDM-F500 US Model Canadian Model AEP Model Chassis No. SCC-L03C-A GDM-F500T9 AEP Model Chassis No.
GDM-F500/F500T9 – 2 – LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part hav- ing a return to chassis, must not exceed 0.5 mA (500 microampers). Leakage current can be measured by any one of three methods.
GDM-F500/F500T9 – 3 – POWER SAVING FUNCTION DIAGNOSIS This monitor meets the power-saving guidelines set by VESA, E NERGY S TAR, and NUTEK. If the monitor is connected to a computer or video graph.
GDM-F500/F500T9 – 4 – TIMING SPECIFICATION MODE AT PRODUCTION MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 RESOLUTION 738 X 414 1600 X 1200 1800 X 1440 1800 X 1350 1364 X 1201 CLOCK 28.322 MHZ 229.500 MHZ 299.436 MHZ 299.000 MHZ 195.500 MHZ — HORIZONTAL — H-FREQ 31.
GDM-F500/F500T9 – 5 – Note: Hand degauss must be used on stand-by or power-off condition. This model has an automatic earth magnetism correction function by using an earth magnetism sensor and a LCC coil.
SECTION 1 GENERAL The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual. 1-1 4 Precautions Warning on power connections • Use the supplied power cord.
1-2 6 Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord (1) • HD15 video signal cable (1) • USB cable (1) • Macintosh adapter (1) .
1-3 8 Connecting Universal Serial Bus (USB) compliant peripherals Your monitor has one upstream and four downstream USB connectors. They provide a fast and easy way to connect USB compliant peripheral devices (such as keyboards, mice, printers and scanners) to your computer using a standardized USB cable.
1-4 10 Customizing Your Monitor You can make numerous adjustments to your monitor using the on-screen menu. Navigating the menu Press the joystick to display the main MENU on your screen. See page 11 for more information on using the joystick. Use the joystick to select one of the following menus.
1-5 12 Adjusting the shape of the picture (GEOM) The GEOM settings allow you to adjust the rotation and shape of the picture. The rotation setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.
1-6 14 Additional settings (OPTION) You can manually degauss (demagnetize) the monitor, change the menu position, set the power saving delay time, and lock the controls. 1 Press the joystick. The main MENU appears on the screen. 2 Move the joystick to highlight OPTION and press the joystick again.
1-7 16 T rouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 18) if the following recommendations do not resolve the problem.
1-8 18 Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode.
GDM-F500/F500T9 2-1. CABINET REMOVAL SECTION 2 DISASSEMBLY 2-2. D BOARD REMOVAL 2-1 Top cover Video shield 4 5 7 9 Screw cover Screw cover Cabinet 3 Four screws (+ BVTP 4 x 16) Four screws (+ BVTT 4 x.
GDM-F500/F500T9 2-3. G BOARD REMOVAL 2-4. A BOARD REMOVAL 2-2 Two screws (+ BVTT 4 x 8) Two screws (+ BVTP 3 x 10) Two screws (+ BVTP 3 x 10) Three hooks GND G shield G board GND Two printed circuit board holders A B 1 9 Screw (+ P 3.
GDM-F500/F500T9 2-5. L BOARD REMOVAL 2-6. SERVICE POSITION 2-3 L board Four printed circuit board holders 1 2 CN5001 CN5002 CN5004 CN5003 D board (Refer to 2-2. ) Rear shield D,G boards A board (Refer to 2-4. ) G board (Refer to 2-3.) CAUTION : SHORT If the claw is hooked, opening and closing the board is impossible.
GDM-F500/F500T9 2-7. H1, H2 AND J BOARDS REMOVAL 2-8. US BOARD REMOVAL 2-4 CN2601 Cushion Stand cover 2 US board 5 Shield case 4 1 Six screws (+ BVTP 3 x 10) Three screws (+ BVTP 3 x 10) 3 Claw Four s.
GDM-F500/F500T9 3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling up it in the direction of the arrow c .
GDM-F500/F500T9 2-10. HARNESS LOCATION 2-6 CN901 CN671 CN672 CN801 CN802 CN803 CN891 CN2601 CN604 CN5003 CN5004 CN5002 CN5001 CN501 CN509 CN690 CN673 CN605 CN603 CN520 CN504 CN503 CN510 CN506 CN513 CN.
GDM-F500/F500T9 When replacing or repairing the shown below table, the following operational checks must be performed as a safety precaution against X-rays emissions from the unit.
GDM-F500/F500T9 SECTION 4 ADJUSTMENTS • Landing Rough Adjustment 1. Enter the full white signal. (or the full black dots signal). 2. Adjust the contrast to the maximum. 3. Make the screen monogreen. Note: Off the outputs from R ch and B ch of SG. 4.
GDM-F500/F500T9 Connect the communication cable of the computer to the connector located on the D board or US board on the monitor. Run the service software and then follow the instruction. IBM AT Computer as a Jig 1-690-391-21 1 A-1500-819-A Interface Unit 2 *The parts above ( ) are necessary for DAS adjustment.
5-1 5-2 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAMS.
5-3 5-4.
5-5 5-6 5-7 5-2. FRAME SCHEMATIC DIAGRAM 5-8 1 2 3 CN2902 V BUS1 D-1 D+1 1 2 3 CN2903 V BUS2 D-2 D+2 1 2 3 CN2904 V BUS3 D-3 D+3 1 2 3 CN2905 V BUS4 D-4 D+4 1 2 3 V BUS1 CN2901 D- D+ FOR BUS 2 3 4 .
5-10 5-11 5-12 • D BOARD SEMICONDUCTOR LOCATION Component () Side Q1007 D-4 1 Q1008 D-4 1 Q1009 D-9 1 DIODE * D004 D-1 7 D006 C-5 – D012 D-5 6 D013 D-4 6 D014 D-2 7 D015 D-2 7 D016 D-1 7 D019 D-5 .
30 12 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 A B C D E F G H I J K L M N O A B C D E F G H I J K L M N O 5-13 5-14 5-15 5-16 (1) Schematic Diagrams of D (1/2, 2/2) Boar.
5-17 5-18 5-19 5-20 (2) Schematic Diagrams of G, H1, H2, J and L Boards Schematic diagrams Ò D D D D D (1/2) D D D D D (2/2) board Schematic diagrams G G G G G (h1)(h2) (h1)(h2) (h1)(h2) (h1)(h2) (h1.
* 1 3 Ref. Q601–Q605, Q608, Q611 Q612, Q901–Q904, Q907, Q908 D614, D902, D911, D916, D918 5-21 5-22 5-23 Schematic diagram A A A A A board l G POWER SUPPLY (h1) USER CONTROL (h2) USER CONTROL J POWER SW — G BOARD — — H1 BOARD — L V.STAT, H.
12 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 A B C D E F G H I J A B C D E F G H I J 475.0 87.0 87.0 87.0 6.5 8 9 7 +200V +15V 8.5 8.0 8.0 9.0 687.0 +200V 4.2 5.0 6.5 4.2 4.8 112.0 112.4 110.4 110.0 +80V 113.7 113.1 2.9 53.0 6 3.4 2.7 3.4 2.8 53.
Component () Side Conductor () Side 5-27 5-28 — A BOARD (Conductor Side) — — A BOARD (Component Side) — A VIDEO AMP RGB OUT • A BOARD SEMICONDUCTOR LOCATION Component () Side Conductor () Si.
5-29 5-30 (4) Schematic Diagram of US Board (Old) Schematic diagram (us) (us) (us) (us) (us) board l 12 3456 7 8 9 10 11 12 13 14 15 A B C D E F G H I 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2.
(us) USB CONTROL Ref. Q2605 – Q2607 D2605 – D2610, D2902 – D2915 * 2 3 5-31 5-32 — US BOARD (Conductor Side) — — US BOARD (Component Side) — * 3 Ref.
) 12 3456 7 8 9 10 11 12 13 A B C D E F G H I 1 2 3 4 G I O VC NC G I O VC NC G I O VC NC G I O VC NC G I O VC NC 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5 6 7 8 9 1 2 3 4 1 2 3 1 2 3 4 5 6 7 8 9 10 1.
M52722P 52 pin DIP M52755FP-TP 36 pin SOP NJM082BM-T1 NJM78L09A TA78L05S TA78L09S NJM78M09FA TA7805S TA7812S PST600J-T 5-5. SEMICONDUCTORS 5-35 BA10393F-E2 NJM4558M µPC4558G2 24LC21AT/SN 8 pin SOP BA.
D1NL20-TR D1NS4 RD13ES-B2 RD26ES-B2 RD22ES-B2 RD16ES-B3 RD18ES-B2 RD22ES-B2 RD5.1ES-B2 RD6.2ESB2 RD6.8ES-B2 RD8.2ES-B2 RD9.1ES-L RD9.1ES-T1B S2LA20F 1SS119-25TD 1SS119-25 D2S4MF D2S4MTA1 D4SBS4 D4SBS4.
GDM-F500/F500T9 • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Items with no part number and no description are not stocked because they are seldom required for routine service.
GDM-F500/F500T9 6-2. PICTURE TUBE 4 7-685-647-79 +BVTP 3X10 p 7-685-663-71 +BVTP 4X16 ¢ 7-685-881-09 +BVTT 4X8 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 6-2 The components identified by shading and mark ¡ are critical for safety.
GDM-F500/F500T9 6-3. PACKING MATERIALS REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 6-3 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
GDM-F500/F500T9 6-4 MEMO.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony GDM-F500 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony GDM-F500 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony GDM-F500, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony GDM-F500 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony GDM-F500, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony GDM-F500.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony GDM-F500. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony GDM-F500 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.