Manuel d'utilisation / d'entretien du produit CMT-EX200 du fabricant Sony
Aller à la page of 24
Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No.
2 Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Don’t throw a battery, dispose it as the injurious wastes. NOTICE FOR THE CUSTOMERS IN THE U.
3 T able of Contents Parts Identification Main unit ................................................... 4 Sub Woofer ............................................... 5 Remote Control ......................................... 6 Getting Started Hooking up the system .
4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses ( ) for details. Main unit Display window 0 FUNCTION 7 ( 11, 17) OPEN/CLOSE Z 1 (11) Remote sensor 9 TUNER/BAND 6 (1 3 ) TUNING +/ – 3 (1 3 ) VOL +/ – 2 BUTTON DESCRIPTIONS m/M 3 .
Parts Identification 5 Sub Woofer CUT OFF FREQ 3 (15) LEVEL 1 (15) PHASE 4 (15) Power indicator 2.
6 Remote Control qg qh ql qk qj w; 12 34 wa ws 6 7 8 9 5 qf 0 qd qa qs BASS +/– qg (15) CD N qk (11) CLOCK/TIMER SELECT 6 (17) CLOCK/TIMER SET 7 (10, 16) DISPLAY 5 (10, 13) DSG qd (15) ENTER 8 (10, .
7 Getting Started Parts Identification/Getting Started Getting Started AM loop antenna Hooking up the system Perform the following procedure 1 to 7 to hook up your system using the supplied cords and accessories. The front cover is made of tempered glass.
8 Hooking up the system (continued) Push in on the tabs and pull up the cover 2 Connect the sub woofer to the system. Connect the speaker cords from the system to the SPEAKER INPUT terminals on the sub woofer as shown below. CMT-EX200 main unit Lined Clear Insert this portion Clear Sub woofer 3 Connect the satellite speakers to the sub woofer.
9 Getting Started 5 Reinstall the rear cover. Put the wires through the hole at the bottom of the rear cover. 6 Connect the power cords of system and the sub woofer to the wall outlet after you complete all the connections. The sub woofer switches to standby mode automatically after a certain time ( Auto Power Off ).
10 Replacing the battery in the remote 1 Slide out and remove the battery case. 2 Insert a new lithium battery CR2025 with the + side facing up. A lithium battery CR2025 3 Slide the battery case back in. Tip When the remote no longer operates the system, replace the battery with a new one.
Getting Started/CD 11 CD 3 Touch OPEN/CLOSE Z (or press OPEN/ CLOSE Z on the remote) again to lower the disc tray. Note Do not touch the playing side of the CD with your fingers, as this may damage CD or cause the CD to load prematurely. Loading a CD 1 Touch OPEN/CLOSE Z (or press OPEN/ CLOSE Z on the remote) to raise the disc tray.
12 Find a point in a track Cancel Program Play Press PLAY MODE on the remote repeatedly until “ PGM ” and “ SHUF ” disappear. Clear the entire program Press x in stop mode. Select the desired track using number buttons Press number buttons on the remote instead of performing steps 3 to 5.
CD/Tuner 13 Presetting radio stations You can preset 20 stations for FM and 10 stations for AM. 1 Press TUNER/BAND (or TUNER BAND on the remote) repeatedly to select “ FM ” or “ AM ” . 2 Press TUNING MODE on the remote repeatedly until “ AUTO ” appears.
14 Presetting radio stations (continued) To stop scanning Press TUNING MODE on the remote. To tune in a station with a weak signal Press TUNING MODE on the remote repeatedly in step 2. “ MANUAL ” appears. Then press TUNING – or + (or – or + on the remote) repeatedly to tune in the station manually and continue from step 4.
Tuner/Sound Adjustment 15 Sound Adjustment Adjusting the sound Generating a more dynamic sound — DSG You can use the DSG (Dynamic Sound Generator) function to produce a more powerful sound.
16 Falling asleep to music — Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP on the remote to select a desired time.
Timer/Optional Components 17 To the digital input jack of a digital component 7 Press . or > repeatedly to select the desired sound source. The indication changes as follows: * Select “ PC/TAPE ” to use an optional component connected to the PC/TAPE jacks as the sound source.
18 Precautions The nameplate is located on the bottom exterior. On safety • The glass over the display window on the cover is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass.
Additional Information 19 T roubleshooting If you have any problem using this system, use the following checklist. First, check that the power cord is connected firmly and that the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
20 Troubleshooting (continued) Sub woofer and satellite speakers There is no sound. • Connect the component properly (see page 8) while checking: – if the cords are connected properly. – if the cord plugs are firmly inserted all the way. • Turn LEVEL on the sub woofer clockwise.
Additional Information 21 Messages One of the following messages may appear or flash in the display during operation. CD NO DISC There is no CD. OVER You have reached the end of the CD while pressing M during play or pause. STEP FULL You tried to program 25 or more tracks (steps).
22 Specifications (continued) Sub woofer (SA-WEX200) Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohms loads, from 50 – 150 Hz; rated 30 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output.
.
Sony Corporation Printed in China.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony CMT-EX200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony CMT-EX200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony CMT-EX200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony CMT-EX200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony CMT-EX200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony CMT-EX200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony CMT-EX200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony CMT-EX200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
