Manuel d'utilisation / d'entretien du produit CMT-EX100 du fabricant Sony
Aller à la page of 24
Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No.
2 Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc.
3 T able of Contents Parts Identification Main unit ................................................... 4 Remote Control ......................................... 5 Getting Started Hooking up the system .............................. 6 Replacing the battery in the remote .
4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses ( ) for details. Main unit Display window 0 FUNCTION 7 ( 9, 16) OPEN/CLOSE Z 1 (9) Remote sensor 9 TUNER/BAND 6 (12 ) TUNING +/ – 3 (12 ) VOL +/ – 2 BUTTON DESCRIPTIONS m/M 3 .
Parts Identification 5 Remote Control qg qh ql qk qj w; 12 3 4 wa ws 6 7 8 9 5 qf 0 qd qa qs BASS +/– qg (14) CD N qk (9) CLOCK/TIMER SELECT 6 (16) CLOCK/TIMER SET 7 (8, 15) DISPLAY 5 (8, 12, 14) DS.
6 Getting Started AM loop antenna 1 Remove the rear cover. Push in on the tabs and pull up the cover 2 Connect the speakers. Connect the speaker cords to the SPEAKER terminals as shown below. Lined Clear Hooking up the system Perform the following procedure 1 to 6 to hook up your system using the supplied cords and accessories.
7 Getting Started 3 Connect the AM antenna. Set up the AM loop antenna, then connect it. Connect the white cord to the U terminal, and the red cord to the other terminal. AM loop antenna White Red 4 Reinstall the rear cover. Put the wires through the hole at the bottom of the rear cover.
8 3 Slide the battery case back in. Tip When the remote no longer operates the system, replace the battery with a new one. Notes • If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage.
Getting Started/CD 9 CD 3 Touch OPEN/CLOSE Z (or press OPEN/ CLOSE Z on the remote) again to lower the disc tray. Note Do not touch the playing side of the CD with your fingers, as this may damage CD or cause the CD to load prematurely. Loading a CD 1 Touch OPEN/CLOSE Z (or press OPEN/ CLOSE Z on the remote) to raise the disc tray.
10 To enter track number 10 or over on the remote 1 Press >10. 2 Enter the corresponding number buttons. To enter 0, press 10/0 instead. Example: To enter track number 30, press >10, then 3 and 10/0. Notes • Do not forcibly press the disc down with your finger, as this may cause CD player trouble.
CD 11 Clear the entire program Cancel Program Play Press x in stop mode. Other Operations To Do this Select the desired track using number buttons Press number buttons on the remote instead of performing steps 3 to 5. Tips • The program you made remains after Program Play finishes.
12 Presetting radio stations You can preset 20 stations for FM and 10 stations for AM. 1 Press TUNER/BAND (or TUNER BAND on the remote) repeatedly to select “ FM ” or “ AM ” . 2 Press TUNING MODE on the remote repeatedly until “ AUTO ” appears.
CD/Tuner 13 To stop scanning Press TUNING MODE on the remote. To tune in a station with a weak signal Press TUNING MODE on the remote repeatedly in step 2. “ MANUAL ” appears. Then press TUNING – or + (or – or + on the remote) repeatedly to tune in the station manually and continue from step 4.
14 Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS)* is a broadcasting service that allows radio stations to send additional information along with the regular program signal.
Tuner/Sound Adjustment/Timer 15 Timer Falling asleep to music — Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music.
16 Waking up to music (continued) 7 Press . or > repeatedly to select the desired sound source. The indication changes as follows: * Select “ PC/TAPE ” to use an optional component connected to the PC/TAPE jacks as the sound source. 8 Press ENTER on the remote.
Timer/Optional Components/Additional Information 17 Precautions The nameplate is located on the bottom exterior. On safety • The glass over the display window on the cover is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass.
18 Precautions (continued) T roubleshooting If you have any problem using this system, use the following checklist. First, check that the power cord is connected firmly and that the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
Additional Information 19 The timer does not function. • Press CLOCK/TIMER SELECT on the remote to set the timer and light up “ DAILY ” in the display (see page 16). • Check the set contents and set the correct time (see page 16). • Cancel the Sleep Timer function (see page 15).
20 Tuner Severe hum or noise/stations cannot be received. • Set the proper band and frequency (see page 12). • Connect the antenna properly (see page 7). • Find a place and an orientation that provide good reception, then set up the antenna again.
Additional Information 21 Specifications Main Unit (HCD-EX100) Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohms loads, both chann.
22 Specifications (continued) Speaker (SS-CEX100) Speaker system 2-way, bass-reflex type Speaker units Woofer: 9 cm dia., cone type Tweeter: 5 cm dia., cone type Impedance 4 ohms Dimensions 130 × 220 × 183 mm (w/h/d, incl. projecting parts and controls) Mass Approx 2.
.
Sony Corporation Printed in China.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony CMT-EX100 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony CMT-EX100 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony CMT-EX100, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony CMT-EX100 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony CMT-EX100, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony CMT-EX100.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony CMT-EX100. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony CMT-EX100 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
