Manuel d'utilisation / d'entretien du produit CMT-EP50LIV du fabricant Sony
Aller à la page of 24
Micr o Hi-Fi Component System Operating Instructions Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 * For European model only T able of Contents Parts Identification Main unit ............................................... 4 Remote Control ..................................... 5 Getting Started Hooking up the system .......................... 6 Inserting two size AAA (R03) batteries into the remote .
4 Cassette compartment qj (1 3 ) CD 4 ( 8, 9, 14) DISPLAY wf ( 9, 11) Display Window 5 (8, 9, 10) ENTER ql ( 7, 9, 10, 12) ISS 0 (14) MEGA BASS 8 (16) MONO STEREO 0 (11 ) MUSIC MENU 9 (1 6 ) PHONES ja.
Parts Identification 5 CD 3 ( 8, 9, 14 ) CLOCK/TIMER qg (7, 15, 17) DISPLAY qh ( 9, 11) MEGA BASS 2 (16 ) MUSIC MENU wa (1 6 ) PLAY MODE/RDS (European model only)/DIR qj ( 8, 9, 12, 13, 14, 15) PRESET.
6 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A 1 Connect the speakers. Connect the speaker cords to the SPEAKER terminals as shown below. Getting Started Hooking up the system Do the following procedure 1 to 3 to hook up your system using the supplied cords and accessories.
Getting Started 7 Setting the time 1 Turn on the system. 2 Press CLOCK/TIMER on the remote. When you set the clock for the first time, go to step 5. 3 Press CLOCK/TIMER on the remote repeatedly until “SET CLK” appears in the display. 4 Press TUNER MEM/ENTER on the remote.
8 CD Loading the CD 1 Press Z PUSH OPEN/CLOSE down to open the lid of the CD compartment. 2 Place a CD with the label side up on the compartment. 3 Press Z PUSH OPEN/CLOSE down to close the lid of the CD compartment. Playing the CD — Normal Play/Shuffle Play/Repeat Play This system lets you play the CD in different play modes.
CD 9 Programing the CD tracks — Program Play You can make a program of up to 32 tracks in the order you want them to be played. 1 Press CD, then place a CD. 2 Press PLAY MODE (PLAY MODE/RDS/ DIR on the remote) repeatedly until “ PROGRAM ” appears in the display.
10 To tune in a station with a weak signal Press TUNING (TUNING/CLOCK/TIMER on the remote) + or – repeatedly in step 2 to tune in the station manually.
Tuner 11 Listening to the radio –– Preset Tuning Preset radio stations in the tuner ’ s memory first. 1 Press TUNER (TUNER/BAND on the remote) repeatedly to select FM or AM. 2 Press PRESET + or – repeatedly to tune in the desired preset station.
12 Locating a station by program type (PTY) You can locate a station you want by selecting a program type. The system tunes in the type of programs currently being broadcast from the RDS stations stored in the tuner ’ s preset memory.
Tape 13 Tape Loading a tape 1 Press TAPE. 2 Press Z PUSH OPEN/CLOSE. 3 Insert a tape in deck with the side you want to play/record facing forward. Playing a tape You can use TYPE I (normal), TYPE II (CrO 2 ) or TYPE IV (metal) tape. 1 Load a recorded tape.
14 Steps Recording from a CD (CD Synchro Recording) Recording from the radio 1 Load a blank tape. 2 Press CD. 3 Load the CD you want to record. 4 Press z .
Tape 15 T imer -recording radio programs You can record a preset radio station from a specified time. To timer-record, you must preset the radio station (see “ Presetting radio stations ” on page 10) and set the clock (see “ Setting the time ” on page 7) beforehand.
16 Sound Adjustment Adjusting the sound Press MEGA BASS. “ MEGA BASS ” appears in the display. To return to normal sound, press the button again. Selecting the audio emphasis Selecting the preset effect from the music menu Press MUSIC MENU repeatedly to select the preset effect you desire.
Sound Adjustment/Other features 17 Waking up to music — Daily Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see page 7). 1 Prepare the sound source you want to play. • CD: Load a CD. • Tape: Insert a tape with the side you want to play on facing towards you.
18 6 Press TUNER MEM/ENTER on the remote. The type of timer followed by the start time, stop time, and the music source, appear, then the original display appears. 7 Press TUNING/CLOCK/TIMER + or – on the remote to adjust the volume, then press TUNER MEM/ENTER on the remote.
Additional Information 19 On operation • If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly.
20 T roubleshooting If you have any problem using this system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
Additional Information 21 The remote does not function. • There is an obstacle between the remote and the system. • The remote is not pointing in the direction of the system ’ s sensor. • The batteries have run down. Replace the batteries. The color irregularity on a TV screen persists.
22 Specifications AUDIO POWER SPECIFICATIONS: (U.S.A. model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 8 Ω loads both channels driven, from 120 - 10,000 Hz; rates 12 W per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 mW to rated output.
Additional Information 23 Speaker Speaker system Bass-reflex type Speaker units Full range 10 cm, cone type Nominal impedance 8 Ω Dimensions (w/h/d) Approx.
24 Sony Corporation Printed in China.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony CMT-EP50LIV c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony CMT-EP50LIV - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony CMT-EP50LIV, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony CMT-EP50LIV va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony CMT-EP50LIV, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony CMT-EP50LIV.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony CMT-EP50LIV. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony CMT-EP50LIV ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
