Manuel d'utilisation / d'entretien du produit CDP-CE525 du fabricant Sony
Aller à la page of 32
3-862-359- 12 (1) 1998 by Sony Corporation CDP-CE525 Operating Instructions.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.
Getting Started 3 Getting Started Unpacking ............................................................................................................................. 4 Hooking Up the System .........................................................
Getting Started 4 Unpacking Check that you received the following items: • Audio connecting cord (1) • Remote commander (remote) (1) • Sony SUM-3 (NS) batteries (2) Inserting batteries into the remote You can control the player using the supplied remote.
Getting Started Getting Started 5 Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.
Getting Started 6 What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • Monaural (2P) mini-plug cord (1) (not supplied) 1 Connect the players with an audio cord (see also “Hookups” on page 5). 2 Connect the players with a monaural (2P) mini- plug cord.
Getting Started Getting Started 7 4 Connect the AC power cord of both players to AC outlets. Notes • Do not connect a player other than that you use as the second player to the 2ND CD IN jacks of this player. • When connecting a second CD player, do not connect the DIGITAL OUT (OPTICAL) connector of this unit to the amplifier.
Basic Operations 8 1 2 3 Playing a CD 25 With the label side up Disc number 4 5 • See pages 4 – 5 for the hookup information. Turn on the amplifier and select the CD player position so that you can listen to the sound from this player. Press 1 / u to turn on the player.
Basic Operations Basic Operations 9 6 Press · . The disc tray closes and the player plays all the tracks once (Continuous Play). Adjust the volume on the amplifier. You can select the disc you want to start playing first Press one of the DISC 1 – 5 buttons.
Playing CDs 10 Using the Display You can check information about the disc using the display. Playing CDs Checking the total number and playing time of the tracks Press TIME/TEXT before you start playing. The display shows the current disc number, the total number of tracks, total playing time and music calendar.
Playing CDs Playing CDs 11 Checking the information of CD TEXT discs CD TEXT discs have information, such as the disc titles or artist names, memorized in a blank space on the discs where there is no information on normal discs.
Playing CDs 12 Replacing Discs While Playing a Disc You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting play of the current disc. EX-CHANGE 1 Press EX-CHANGE. The disc tray opens and two disc compartments appear.
Playing CDs Playing CDs 13 You can extend the playing time during scanning the discs Press DISC CHECK repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.
Playing CDs 14 Locating a P articular Point in a T r ack You can also locate a specific point in a track while playing a disc. To locate A point while monitoring the sound A point quickly by observing.
Playing CDs Playing CDs 15 When the disc is played in ALL DISCS Continuous Play (page 8) 1 DISC Continuous Play (page 8) ALL DISCS Shuffle Play (page 15) 1 DISC Shuffle Play (page 15) Program Play (page 16) To cancel Repeat Play Press REPEAT repeatedly until “REPEAT OFF” appears in the display.
Playing CDs 16 3 Turn ≠ AMS ± until the track number you want appears in the display. The track number being programmed flashes and the total playing time including the track appears in the display. 4 Push ≠ AMS ± to select the track. If you’ve made a mistake Press CLEAR, then repeat Steps 3 and 4.
Playing CDs Playing CDs 17 The program remains even after the Program Play ends When you press the · button, you can play the same program again. The program remains until you erase it or turn off the player If you replace discs, the programmed disc and track numbers remain.
Playing CDs 18 Playing discs of the second CD player 1 Press MEGA CONTROL. The MEGA CONTROL button lights up and the display shows the current disc number of the second player. 2 Select the play mode you want. To program tracks, use the controls on the second player.
Playing CDs Playing CDs 19 To Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track You need to Press P Press p Turn ≠ AMS (DISC) ± until the display s.
Playing CDs 20 3 Press · to start playing. The MEGA CONTROL button lights up while the track in the second player is selected. To check the X-Fade mode status Press X-FADE once. The X-Fade mode status appears momentarily. To cancel No-Delay/X-Fade Play Press the corresponding button repeatedly until the button goes off.
Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs 21 Recording From CDs Recording From CDs Recording From CDs Recording Y our Own Pr ogram You can record the program you’ve created on a tape, etc. The program can contain up to 32 steps.
Recording From CDs 22 F ading In or Out You can manually fade the sound in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. Press FADER During pause. FADE lights up in the display and the Q indication flashes.
Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs 23 Recording From CDs Recording From CDs Adjusting the Recording Level (P eak Sear ch) The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
Storing Information About CDs (Custom Files) 24 You can Label discs using up to 12 characters Delete unwanted tracks and store only the tracks you want Storing Information About CDs (Custom Files) Lab.
Locating a Scene or Track You Want 25 Locating a Scene or Track You Want Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files) 1 Press DISC/CAPS.
Storing Information About CDs (Custom Files) 26 Storing Specific T racks (Delete Bank) You can delete unwanted tracks and store only the tracks you want.
Additional Information Additional Information Additional Information 27 Additional Information Notes on CDs On handling CDs • To keep the disc clean, handle the disc by its edge.
Additional Information 28 Specifications Compact disc player Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Laser output Max 44.6 µ W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture.
29 Index A, B Advanced Mega Control 18 AMS 14 Automatic Music Sensor. See AMS C, D CD TEXT 11 Changing the Disc Memos 19 Connecting 4 another CD player 6 Continuous Play 8 Controlling another CD player 18 X-Fade Play 20 Custom Files Delete Bank 26 Disc Memo 24 what you can do with 24 E Editing.
30.
31.
32 Sony Corporation Printed in China.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony CDP-CE525 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony CDP-CE525 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony CDP-CE525, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony CDP-CE525 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony CDP-CE525, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony CDP-CE525.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony CDP-CE525. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony CDP-CE525 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
