Manuel d'utilisation / d'entretien du produit SE2640TD2 du fabricant Smeg
Aller à la page of 24
Contents 27 EN 1 Instructions 28 1.1 How to read the user manual 28 1.2 This user manual 28 1.3 Appliance purpose 28 1.4 General safety instructions 28 1.5 Manufacturer's liability 29 1.6 Identification plate 29 1.7 Disposal 29 2 Description 30 2.
Instructions 28 1 Instructions 1.1 How to read the user manual This user manual uses the following reading conventions: 1. Use instruction sequence. • Single use instruction.
Instructions 29 EN For this appliance • Do not obstruct ventilation openings and heat dispersal slots. • Do not insert pointed metal objects (cutlery or utensils) into the slots in the appliance. • Do not seat on the appliance. • Do not use the appliance to heat rooms for any reason.
Description 30 2 Description 2.1 General Description The appliance has cooking zones with various diameters and power levels depending on the model. The position and the heat of the cooking zones are limited to within the diameters of the circles traced on the glass.
Description 31 EN 30 cm 90 cm Arrangement of the cooking zones: hobs with frame 60 cm 70 cm.
Description 32 * power levels are indicative and can vary according to the settings made and the mains voltage. 2.2 Symbols ON/OFF key Turns the hob on or off. Control lock button Activates or deactivates the control lock if pressed for 3 seconds. Increase key Increases the power level or cooking time.
Description 33 EN 2.3 Available accessories Scraper Useful for cleaning the hob. The accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation. Original and optional accessories can be requested to Authorised Assistance Centres.
Use 34 3 Use 3.1 Instructions High temperature Danger of burns • Protect your hands wearing heat-proof gloves during use. • Do not touch or clean the hob surface during operation or when the residual heat indicator lights are still on. • Do not put empty saucepans or frying pans on switched on cooking zones.
Use 35 EN 3.2 Preliminary operations In order to remove any moisture that could have accumulated during the manufacturing process and for the electronic circuits and control keypad to work properly: 1. Remove the protective films from the external surfaces of the appliance and accessories.
Use 36 Switching on a single cooking zone 1. After switching on the hob, use the Increase keys to activate the required cooking zone. The display shows the symbol . 2. Press the Increase key again. The display shows the symbol or (depending on the model) to indicate that the cooking zone is on at the maximum power.
Use 37 EN Switching on the triple cooking zone 1. After setting the maximum power or (depending on the model), press the Increase keys. On the display a lighted dot comes on beside the power setting to indicate that the inner cooking zone or has switched on (depending on the model).
Use 38 Control lock The control lock is a device that protects the appliance from accidental or inappropriate use. Useful for preventing accidental changes to set cooking values, the lock can be activated while the hob is on or off. 1. After switching on the hob, press the Control lock key for at least 2 seconds.
Use 39 EN 4. To deactivate the timer during the countdown, zero its value using the Decrease key . When the display shows the timer will be deactivated. Automatic shut-down timer (on some models only) This function allows you to program the automatic shut-down of each cooking zone at the end of a set period of time (from 1 to 99 minutes).
Use 40 On first installing, within two minutes of powering on the hob, hold down the Increase and Decrease keys for the first cooking zone (the one near symbol ).
Use 41 EN Cooking information table * on some models only Power level Cooking mode Suitable for... 0 OFF position Off U Dishwarming warming up dishes 1 Cooking small amounts of food (minimum power) melting butter, chocolate or similar products.
Use 42 Limiting the cooking time The hob has an automatic device which limits the duration of use. If the cooking zone settings are not changed, the maximum duration of operation of each zone depends on the power level selected.
Cleaning and maintenance 43 EN 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the oven surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary weekly cleaning Clean and maintain the hob once a week using an ordinary glass cleaning product.
Cleaning and maintenance 44 Changes in colour do not affect the operation and stability of the glass. These are not alterations to the material of the hob but just residues which have not been removed and have then carbonised.
Installation 45 EN 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.
Installation 46 90 cm models: • 220-240 V 1N ~ Use a 3 x 6 mm² three-core cable: The diagram below illustrates the power supply terminal from below, with no cables connected. Terminals 4 and 5 must be connected at all times. Fixed connection Fit the power line with an omnipolar circuit breaker in compliance with installation regulations.
Installation 47 EN 5.2 Safety instructions Veneers, adhesives or plastic coatings on adjacent furniture should be temperature- resistant ( >90°C ), otherwise they might warp over time.
Installation 48 Hobs without a frame Hobs with a frame 5.4 Mounting Over built-in oven The distance between the hob and the kitchen furniture or other installed appliances must be enough to ensure sufficient ventilation and air discharge. If installed above an oven, a space must be left between the hob and the top of the appliance installed below.
Installation 49 EN Over empty kitchen unit or drawers If there are other pieces of furniture (lateral walls, drawers, etc.), dishwashers or fridges under the hob, a double-layer wooden base must be installed at least 30 mm from the bottom of the hob to avoid any accidental contact.
Installation 50 2. Then turn them upwards to fix them in place. 5.6 Fixing brackets • Screw the fixing brackets ( A ) into the holes on the sides of the bottom casing to properly fasten the hob to the structure.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Smeg SE2640TD2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Smeg SE2640TD2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Smeg SE2640TD2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Smeg SE2640TD2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Smeg SE2640TD2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Smeg SE2640TD2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Smeg SE2640TD2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Smeg SE2640TD2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
