Manuel d'utilisation / d'entretien du produit PV175CB du fabricant Smeg
Aller à la page of 22
Contents 25 EN 1 Instructions 26 1.1 General safety instructions 26 1.2 Manufacturer liability 27 1.3 Appliance purpose 27 1.4 Disposal 27 1.5 Identification plate 28 1.6 This user manual 28 1.7 How to read the user manual 28 2 Description 29 2.1 General Description 29 2.
Instructions 26 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised.
Instructions 27 EN 1.2 Manufacturer liability The manufacturer declines all liability for damage to persons or property caused by: • use of the appliance other than the one envisaged, • non-observance of the user manual provisions, • tampering with any part of the appliance, • use of non-original spare parts.
Instructions 28 1.5 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance. Do not remove the identification plate for any reason.
Description 29 EN 2 Description 2.1 General Description 60 cm 70 cm AUX = Auxiliary SR = Semi-rapid RR = Reduced rapid R1= Large rapid R2 = Medium rapid.
Description 30 2.2 Symbols Cooking zones Front left Rear left Central Rear right Front right Centre left Burner knobs Useful for lighting and adjusting the hob burners. Press and turn the knobs anti- clockwise to the value to light the relative burners.
Use 31 EN 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from accessories. 3. Remove and wash all the appliance accessories (see 4 Cleaning and maintenance).
Use 32 3.3 Using the hob All the appliance's control and monitoring devices are located together on the front panel. The burner controlled by each knob is shown next to the knob. The appliance is equipped with an electronic ignition device. Simply press the knob and turn it anti- clockwise to the maximum flame symbol, until the burner lights.
Use 33 EN Practical tips for using the hob For better burner efficiency and to minimise gas consumption, use pans with lids and of suitable size for the burner, so that flames do not reach up the sides of the pan. Once the contents come to the boil, turn down the flame far enough to ensure that the liquid does not boil over.
Cleaning and maintenance 34 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance T o keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Ordinary daily cleaning Always use only specific products that do not contain abrasives or chlorine-based acids.
Cleaning and maintenance 35 EN Cooking hob grids Remove the grids and clean them with lukewarm water and non-abrasive detergent. Make sure to remove any encrustations. Dry them thoroughly and return them to the hob. Flame-spreader crowns and burner caps For easier cleaning, the flame-spreader crowns and the burner caps can be removed.
Installation 36 5 Installation 5.1 Safety instructions V eneers, adhesives or plastic coatings on adjacent furniture should be temperature- resistant ( >90°C ), otherwise they might warp over time. The minimum distances must also be respected for the edges of the hob on the back as indicated in the mounting illustrations.
Installation 37 EN 5.3 Mounting Over built-in ov en The distance between the hob and the kitchen furniture or other installed appliances must be enough to ensure sufficient ventilation and air discharge. If installed above an oven, a space must be left between the bottom of the hob and the top of the appliance installed below.
Installation 38 Hob seal T o prevent leakage of liquid between the frame of the hob and the work surface, place the adhesive seal provided along the entire outer edge of the hob before assembly. 5.4 Fixing brackets Screw the fixing brackets ( A ) into the holes on the sides of the bottom casing to properly fasten the hob to the structure.
Installation 39 EN Carefully screw the connector 3 to the gas connector 1 of the appliance, placing the seal 2 between them. Connection with a flexible steel hose with conical fitting Make the connection to the gas mains using a continuous wall flexible steel hose whose specifications comply with the applicable standard.
Installation 40 Extraction of the combustion products The combustion products may be extracted by means of hoods connected to a natural draught chimney whose efficiency is certain or via forced extraction.
Installation 41 EN Removing the hob top 1. Remove the grids from the hob. 2. Remove the flame-spreader crowns and relative burner caps. 3. Pull the knobs upwards to remove them. 4. Unscrew the burner rings using the supplied wrench. 5. Remove the top.
Installation 42 Replacing nozzles 1. Unscrew screw A and push air regulator B as far as it will go. 2. Use a spanner to remove the nozzles C and install the new ones for the required gas supply, following the indications given in the relevant table (see “Gas types and Countries”).
Installation 43 EN Adjusting the minimum setting for LPG T ighten the screw located at the side of the tap rod clockwise all the way. Lubricating the gas taps Over time the gas taps may become difficult to turn and get blocked. Clean them internally and replace the lubrication grease.
Installation 44 Gas types and Countries N o Gas types IT GB-IE FR-BE DE AT NL ES PT SE RU DK 1 Natural Gas G20 G20 20 mbar •• •• ••••• G20/25 20/25 mbar • 2 Natural Gas G25 G25 25 .
Installation 45 EN Burner and nozzle characteristics tables Nozzles which are not provided are available at Authorised Service Centres. 1 Natural Gas G20 AUX SR RR R1 R2 Rated heating capacity (kW) 1.1 1.7 2.6 3.5 3.0 Nozzle diameter (1/100 mm) 76 95 117 135 126 Reduced capacity (W) 400 500 750 1050 1050 Primary air (mm) 1.
Installation 46 5.7 Electrical connection General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Smeg PV175CB c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Smeg PV175CB - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Smeg PV175CB, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Smeg PV175CB va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Smeg PV175CB, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Smeg PV175CB.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Smeg PV175CB. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Smeg PV175CB ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
