Manuel d'utilisation / d'entretien du produit 04H8095 du fabricant Sirius Satellite Radio
Aller à la page of 36
Auto LANStreamer PCI Adapter 04H8095 Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
1 Connecting to a Netware 3.12 Server Windows for Workgroups C:WINDOWS ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
1 Connecting to Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
1 Connecting to Netware 3.12 Server Windows 95 SR2 10 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:MASTERSLANLNSTRMDISK2”) 11 At the “Copying Files” window, click on “OK.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NO ❒ IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Netware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04. • Driver Name: Windows 95 Default • Novell Netware 4.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Insert disk 1of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and click “OK.” (If you have an HP preloaded HDD, set the path to “C:MASTERSLANDRVLNSTRMDISK2”) 11 At the “Copying Files” window, click on “OK.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 7 Click on “Drivers” then on “Add Adapter.” 8 With “Unlisted or Updated Network Adapter”, click on “OK.” 9 Insert disk 1 of 5 (Auto LANStreamer PCI Driver Diskette), set the path to “A:” and hit enter.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk. • Driver Name for Vectra VL8 and VL7: W95setup.inf Size: 40KB Date: 9/ 17/96. • Driver Name for Vectra VE7/VE8: Streamer.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Click on “Finish.” 10 When prompted to insert the disk labeled “IBM Streamer Family Adapter Option Diskette”, click “OK.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 “C:MASTERSLANDRVLNSTRMDISK4WIN95”) 25 Click on “Yes” button to finish the setup installation and restart your computer.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name for Vectra VL8 and VL7: OEMSETUP.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 box..
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name for VL8 and VL7: OEMSETUP.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 With “Wired to the Network” checked, click on “Next.” 10 Click on “Select from List”, then click “Have Disk.” 11 Set the path to “A:NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 5 , Auto LANStreamer PCI drivers disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 26 To complete the installation, remove the floppy disk, and click on “Yes” to restart your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 6 Click on “Start”, up to “Settings”, and open “Control Panel.” 7 Select the “Network” icon in the “Control Panel” program group. 8 Click on “YES” in the “Network Settings“ dialog box, and NT Networking will be installed on your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 (If you do not have the required information, contact your network administrator) 25 Verify that “Networking has been installed on this computer” and click on “Finish.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 1.04 • D r i v e r N a m e : O E M S E T U P .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name for for VL8 and VL7: IBMMPC.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups D:MASTERSLANLNSTRMDISK2”) 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Drivers” and click on “Close.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk. • Driver Name for VE7/VE8: Streamer.sys Size: 85KB Date:09/13/96. • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Option Diskette”, click “OK.”Insert Disk 1 of 5 of IBM Auto LANStreamer drivers disks and set path to “A:” (If you have an HP pre-loaded HDD, set the path statement to “C: MASTERSLANDRVLNSTRMDISK1”).
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 computer..
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
.
V ersion Number Lans PCI Rev .1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sirius Satellite Radio 04H8095 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sirius Satellite Radio 04H8095 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sirius Satellite Radio 04H8095, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sirius Satellite Radio 04H8095 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sirius Satellite Radio 04H8095, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sirius Satellite Radio 04H8095.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sirius Satellite Radio 04H8095. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sirius Satellite Radio 04H8095 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
