Manuel d'utilisation / d'entretien du produit P7216 du fabricant Axis Communications
Aller à la page of 16
INSTALLATION GUIDE AXIS P7216 Video Encoder E N G L I SH.
Legal Considerations Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license and one (1) AAC decoder license.
Europe This digital equipment fullls the requirements for RF emission according to the Class B limit of EN 55022. This product fullls the requirements for immunity according to EN 61000-6-1 residential, commercial and light-industrial environments.
.
AXIS P7216 Video Encoder Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
AXIS P7216 Video Encoder Safety Instructions NOTICE NOTICE NOTICE • The Axis product shall be used in compliance with local laws and regulations. • To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.
AXIS P7216 Video Encoder Installation Guide This Installation Guide provides instructions for installing AXIS P7216 Video Encoder on your network. For other aspects of using the product, see the User Manual available at www.axis.com Installation Steps 1.
AXIS P7216 Video Encoder 2 Network connector SFP 3 Network connector RJ45 4 Auxiliary connector RJ45 (maintenance) 5 Card slot (microSD) x4 6 I/O terminal connector x4 7 RS-485/422 connector x4 8 Cont.
AXIS P7216 Video Encoder Connectors For specications, see page 10 . BNC connector - Each video input is terminated using a coax/BNC connector. Connect a 75 Ohm coaxial video cable; the recommended maximum length is 800 feet (250 meters).
AXIS P7216 Video Encoder Power connector - 2-pin terminal block for power input. Use a limited power source (LPS) with either a rated output power limited to £ 100 W or a rated output current limited to £ 5 A. I/O terminal connector - Use in applications for e.
AXIS P7216 Video Encoder Connectors I/O terminal connector 6-pin terminal block for: • Digital Input • Digital Output • Auxiliary power and ground (GND) 1 2 3 4 5 6 Function Pin Notes Specications GND 1 Ground 3.3 V DC Power 2 Can be used to power auxiliary equipment.
AXIS P7216 Video Encoder must be connected in parallel with the load, for protection against voltage transients. 3. 3 V max 250 mA 1 2 A B A I/O congured as input B I/O congured as output Power connector DC power input 2-pin terminal block for power input.
AXIS P7216 Video Encoder Audio Input Audio Output 1 Tip Microphone/Line in 2 Ring Line out (mono) 3 Sleeve Ground Ground RS-485/422 connector Two 2-pin terminal blocks for RS485/RS422 serial interface.
AXIS P7216 Video Encoder Connect the cables 1. Connect the video encoder to the network using a network cable RJ45 and/or a SFP cable. 2. Optionally connect the external input/output devices. 3. Optionally connect active speakers and/or external microphones.
AXIS P7216 Video Encoder Further Information The User Manual is available at www.axis.com Visit www.axis.com/techsup to check if there is updated rmware available for your network product. To see the currently installed rmware version, go to Setup > About .
Installation Guide Ver. M1.8 AXIS P7216 Video Encoder Date: May 2013 © Axis Communications AB, 2013 Part No. 50452.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Axis Communications P7216 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Axis Communications P7216 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Axis Communications P7216, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Axis Communications P7216 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Axis Communications P7216, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Axis Communications P7216.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Axis Communications P7216. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Axis Communications P7216 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.