Manuel d'utilisation / d'entretien du produit SWF85562 du fabricant Simpson
Aller à la page of 36
SWF85562 5.5 Kg Fr ont Load W asher Instruction Booklet.
CONTENTS CUSTOMER CARE AND SERVICE 2 Contents / Customer Care And Service SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE WASHING HINTS INTERNATIONAL WASH CODE SYMBOLS CARE AND CLEANING TROUBLESHOOTING .................
Safety Information 3 SAFETY INFORMATION 1. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
4 Safety Information After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Product Description 5 PRODUCT DESCRIPTION 2. 1 Worktop 2 Detergent/Softener Dispenser 3 Control Panel 4 Door Handle 5 Door 13 Child Safety Device 14 Rating Plate 15 Drain Filter 7 6 Level Adjustment F.
CONTROL PANEL 3. 6 Product Description / Control Panel 1 2 Program Selector Knob (see page 9) 3 4 Spin Selection Button 5 Options Button 6 Quick Wash Button 7 Delay Start Button Start/Pause Button Working Status 1 2 3 4 6 5 7 To remove the transit bolts.
At the end of program ‘End Cycle’ pilot lights come on and the ‘Door Lock’ indicator goes off. The door can be opened. 3.3 Options Button Control Panel 7 Select this option if you wish your laundry to be pre-washed before the main wash. Use this option for heavy soil.
8 Control Panel 3.6 Start/Pause Button 3.7 Working Status If you wish to add laundry in the machine during the delay time press Start/Pause button to put the machine in pause mode.
Control Panel 9 3.8 Programs + Options Program; Temperature Cottons; 90 °C Cottons ; 60 °C Cottons; 40 °C White cotton (heavy soiled cotton items):e.
10 Control Panel/Before First Use Program; Temperature Hand Wash; 30 °C Hand Wash; Cold Special program for hand washing fabrics; maximum load 1 kg. Main wash at 30° C Rinses Short spin Spin Reducti.
Daily Use 11 DAILY USE 5. Step 1 - Setting A Program For Washing 5.1 Four Steps Start Up Guide Connect the mains plug to the mains socket. Turn the water tap on. 1 2 3 4 1. Turn the program selector dial to the required program. Once you select a wash program, the program selected will stay at that position for the whole of the wash.
12 Daily Use Step 2 - Loading The Laundry 1. Before loading the laundry, please make sure: Empty pockets. Tie the cords. Fasten buttons. Close zippers. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 3. Open the door by carefully pulling the door handle outwards.
Daily Use 13 Powder or liquid detergent. 1 3 Position down : for liquid detergent. Position up : for powder detergent (factory setting). Position down : for liquid detergent. Position up : for powder detergent (factory setting). 2 Step 3 - Using Detergent And Additives Detergent Dispenser Drawer 1.
14 Daily Use To pause press Start/Pause. The indicator will start flashing. - Press the Start/Pause again. The program will continue. - 5.2 Interruption Of A Program 5.3 Changing A Program It is possible to change only some options after the program has started.
Daily Use 15 If the door lock indicator does not disappear, this means that the machine is already heating and the water level is above the bottom edge of the door or the drum is turning.
16 Washing Hints WASHING HINTS 6. Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.1 Sorting The Laundry 6.2 Temperatures 90°C 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.
Washing Hints 17 Rust : oxalic acid dissolved in hot water or a rust removing product used in cold water. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains : treat with bleach, rinse well (whites and fast coloureds only).
18 Washing Hints the wash load to turn grey, greasy clothes. sudsing, inadequate rinsing. reduced washing effect, Any fabric softener or starching additives must be poured into the compartment marked ‘ ’ before starting the wash program.
International Wash Code Symbols 19 INTERNATIONAL WASH CODE SYMBOLS 7. These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Bleach in cold water DO NOT bleach Bleaching Energetic wash Delicate wash Hand wash Max.
20 Care And Cleaning CARE AND CLEANING 8. You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Care And Cleaning 21 8.7 Cleaning the drain filter Turn program selector dial to position Off ( ). Unplug the appliance. Open the door. To clean the drain filter: Disconnect the mains plug from the mains socket. Do not clean the drain filter if the water in the appliance is hot.
22 Care And Cleaning 2. Open the filter cover by pressing the special hook and by rotating the cover upwards. Hold filter securly and pull upwards to remove it from its position. Clean the filter under the water tap. After cleaning the filter, open the filter cover and insert the filter back to its position.
Care And Cleaning 23 IMPORTANT! Close the filter cover. Insert the mains plug again. The filter is inserted correctly when the indicator on this top is visible and you will hear “Click” sound. 7. 8. 9. Do not start washing clothes without the filter in its place.
24 Care And Cleaning If the machine is exposed to temperatures below 0°C, certain precautions should be taken. 8.9 The Dangers Of Freezing Turn off the water tap. 1. 2. Unscrew the inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot.
Troubleshooting 25 The door has not been closed. The plug is not properly inserted in the power socket. There is no power at the socket. Insert the plug into the power socket. Please check your domestic electrical installation. The Start/Pause button has not been pressed.
26 Troubleshooting Malfunction Possible cause Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. Reduce the detergent quantity or use another one. Reduce the detergent quantity or use another one. Redistribute laundry manually in the drum and start the spin phase again.
Troubleshooting 27 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
28 Technical Data TECHNICAL DATA 10. Dimensions Power supply (voltage/frequency) Total power absorbed Minimum fuse protection Water supply pressure Maximum load Spin speed 220-240 V/50 Hz 2000 W 10 A 0.8 MPa 0.05 MPa Maximum Minimum 850 RPM 500 RPM Maximum Minimum Width Height Depth 60 cm 85 cm 56 cm 5.
Installation 29 INSTALLATION 11. 11.1 Unpacking You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. Use gloves. Remove the external film. If necessary, use a cutter. Remove the polystyrene packaging materials.
30 Installation Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. Use a spirit level on the top and side of the washing machine to check the levels.
Installation 31 Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. When the washing machine is levelled, try to rock it from corner to corner. If it does rock, adjust the legs again until it is levelled and does not rock.
32 Installation Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. When the appliance is installed the power supply cable must be easily accessible.
Environment Concerns 33 The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
NOTE.
.
www .simpson.com.au 147194895-001-352013.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Simpson SWF85562 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Simpson SWF85562 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Simpson SWF85562, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Simpson SWF85562 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Simpson SWF85562, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Simpson SWF85562.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Simpson SWF85562. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Simpson SWF85562 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.