Manuel d'utilisation / d'entretien du produit 16HP V-Twin du fabricant Simplicity
Aller à la page of 50
sziip.iifg OPERATOR’S MANUAL Broadmoor Series 14HP Tractors Mfg. No. Description 1693052 Broadmoor, 14HP Hydro 1693068 Broadmoor, 14HP Hydra (Export) 1693351 Broadmoor, 14HP Hydra 1693358 Broadmoor, 14HP Hydra (Export) 16HP Tractors Mfg.
c) Simplicify MANUFACTURING, INC. 500 N Spring Street I PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com 0 Copyright 1998 Simplicity Manufacturing, Inc, All Rights Reserved.
AGCO ALLIS OPERATOR’S MANUAL 1600 Series 14HP Tractors Mfg. No. Description 1693058 1614H, 14HP Hydra 1693365 1614H, 14HP Hydro 16HP Tractors Mfg. No.
AGCO ALLIS AGCO-Allis Lawn &Garden Equipment 500 N. Spring Street P.O. Box 997 Port Washington, WI 53074.0997 USA www.allislawn.com 0 Copyright 1998 Simplicity Manufacturing, Inc.
MASSEY FERGUSON LAWN & GARDEN EQUIPMENT OPERATOR’S MANUAL 2600 Series 16HP Tractors Mfg. No. Description 1693064 2616H, 16HP Hydra 1693372 2615H, 16HP Hydro 16HP V-Twin Tractors Mfg. No. Description 1693066 2616VH, 16HP V-Twin Hydra 1693374 2616VH, 16HP V-Twin Hydra 18HP V-Twin Tractors Mfg.
MASSEY FERGUSON LAWN a GIRDEN EWIPIEM Massey Ferguson lawn &Garden Equipment is Manufactured and Distributed by Simplicity Manufacturing, Inc. 500 N. Spring Street * P.O. Box 997 * Port Washington, WI 53074.0997 USA 0 Copyright 1998 Simplicity Manufacturing, Inc.
Table of Contents Identification Numbers ...................................... .2 Safety Rules & Information ............................... .3 Features & Controls ........................................... .6 Control Functions .............
Identification Numbers When contacting your Authorized Dealer for replacement parts, service, or information YOU MUST HAVE THESE NUMBERS. WI 53074-0997 Unit Identification Tag Mower Deck Identificatio.
A Safety Rules & Information A Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mow- ina deck is caoable of amoutatina hands and feet and throwina obiects.
Safety Rules & Information CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that chil- dren will remain where you last saw them.
Safety Rules 81 Information SAFETY DECALS This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
Features & Controls Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions provided in this manual. Figure 1. Tractor & Mower Controls A.
Features & Controls G. Ignition Switch The ignition switch starts and stops the engine, it has three positions: OFF Stops the engine and shuts off the electrical system. RUN Allows the engine to run and powers the electrical system. START Cranks the engine for starting.
PARKING BRAKE / CRUISE CONTROL KNOB FUNCTIONS Applying the Parking Brake - See Figure 2. To lock the parking brake, release the ground speed pedals (A), fully depress the brake pedal (B), pull UP on the parking brake /cruise control knob (C), and then release brake pedal.
Features %I Controls A SAFETY INTERLOCK SYSTEM his unit is equipped with safety interlock switches Id other safety devices. These safety systems are resent for your safety, do not attempt to bypass afety switches, and never tamper with safety svices. Check their operation regularly.
Operating the Tractor GENERAL OPERATING SAFETY Before first time operation: l Be sure to read all information in the Safety and Operation sections before attempting to operate this tractor and mower. l Become familiar with all of the controls and how to stop the unit.
Operating the Tractor STARTING THE ENGINE 1. While sitting in the operator’s seat, fully depress the brake pedal or set the parking brake. 2. Make sure that your feet are not depressing the ground speed control pedals. 3. Disengage the PTO clutch. 4.
Operating the Tractor Figure 6. Raising & Lowering Mower A. Mower Lift Lever B. Mower Height Adjuster MOWER DECK REMOVAL & INSTALLATION Removing the Mower Deck Figure 7. Lift Arms (Viewed from underneath right side of tractor) A. Mower Lift Arm C.
Operating the Tractor Figure 10. Raising & Lowering Mower A. Mower Lift Lever B. Mower Height Adjuster ,A WARNING 7 Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower. Installing the Mower Deck 1.
STORAGE Temporary Storage (30 Days Or Less) Remember, the fuel tank will still contain some gasoline, so never store the unit indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the unit in any structure used for human or animal habitation.
Regular Maintenance MAINTENANCE SCHEDULE & PROCEDURES The following schedule should be followed for normal care of your tractor and mower. You will need to keep a record of your operating time.
Regular Maintenance A WARNING Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.
Regular Maintenance access Engine ACCESSING THE ENGINE To gain access to the angina, unhook the rubber straps (Figure 18) and tip the hood forward. NOTE: For engine service item locations see Figure 2.
Regular Maintenance LUBRICATION r Lubricate the unit at the locations shown fin Figures 21 through 25 as well as the following lubrication points. Grease: i l front axle pivot l front wheel bushings l front axle grease fittings l steering linkage l foot pedal .
Regular Maintenance Figure 24. Arbor Lubrication Points Figure 25. Mower Lubrication Points LUBRICATE REAR AXLES We recommend removing the rear wheels and lubricat- ing the axle shafts yearly. This prevents the wheel from seizing onto the axle shaft, making future service easier.
Regular Maintenance BATTERY MAINTENANCE Checking the Battery Fluid 1. Raise the hood to access battery. 2. Remove the battery filler cap (See Figure 28). Fluid must be even with the split ring full mark. If not, add distilled water. 3. Reinstall the filler cap.
Regular Maintenance SERVICING THE MOWER BLADES For your personal safety, do not handle the sharp improper handling of blades may result in serious 1. Remove mower from the tractor. See Mower Installation & Removal. 2. Blades should be sharp and free of nicks and dents.
Troubleshooting, Adjustment, & Service TROUBLESHOOTING While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.
Troubleshooting, Adjustment, & Service Tractor Trsubleshaatb&J Cant. Engine runs, but tractor will not drive. Tractor drive belt slips. Brake will not hold. Tractor steers hard or handles poorly. Drive belt does not stop when clutch/brake pedal depressed.
Troubleshooting, Adjustment, & Service STEERING WHEEL ADJUSTMENT 1. Use a suitable drift to remove the roll pin at the base of the steering wheel (see Figure 32).
Troubleshooting, Adjustment, %I Service ,A WARNING v r--=--- To avoid serious injury, perform adjustments only with engine stopped, key removed and tractor on level ground. PTO CLUTCH ADJUSTMENT Adjustment of the PTO clutch is usually not necessary on new units.
Troubleshooting, Adjustment, 81 Service BRAKE ADJUSTMENT 1. Disengage the PTO, stop the engine, block the wheels, and remove the ignition key. DO NOT engage the parking brake. 2. Remove the mower deck (see Mower Deck Removal). 3. Locate the brake spring (A, Figure 37) and adjust- ment nut (B).
Troubleshooting, Adjustment, & Service ,A WARNING -1 Before checking mower, shut off PTO and engine. Allow all moving parts to stop. Remove ignition key, then disconnect the spark plug wire and fasten it away from the spark plug. Leveling The Mower If the cut is uneven, the mower may need leveling.
TRANSMISSION DRIVE BELT REPLACEMENT NOTE: Be sure to use only genuine Simplicity replace- ment parts. Check the back of this manual or the decal under the hood for common replacement part numbers. REMOVE THE OLD BELT See Figure 41. 1. Turn off the PTO, stop the engine, and block the tires.
To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS. MOWER BELT REPLACEMENT 38” Mower Drive Belt Replacement NOTE: Be sure to use only genuine Simplicity replace- ment parts. Check the back of this manual or the decal under the hood for common replacement part numbers.
Troubleshooting, Adjustment, & Service To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS. 44” & 50” PTO Belt Replacement NOTE: Be sure to use only genuine Simplicity replace- ment parts. Check the back of this manual or the decal under the hood for common replacement part numbers.
Troubleshooting, Adjustment, %I Service 44” & 50” Arbor Drive Belt Replacement NOTE: Be sure to use only genuine Simplicity replace- ment parts. Check the back of this manual or the decal under the hood for common replacement part numbers. 1. Park the tractor on a smooth, level surface such as a concrete floor.
Troubleshooting, Adjustment, & Service BATTERY SERVICE ,A WARNING ------- Keep open flames and sparks away from the Checking Battery Voltage A voltmeter can be used to determine condition of bat- tery. When engine is off, the voltmeter shows battery voltage, which should be 12 volts.
Troubleshooting, Adjustment, & Service THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES Switch Starting Vehicle Battery Jumper Cable z-per c To Ground Discharged Vehicle Battery Block MAKE CERTAIN VEHICLES DO NOTTOUCH Figure 48.
HEADLIGHT REPLACEMENT See Figure 49. 1. Open the hood. 2.. Remove the light bulb socket from the bezel by twist- ing it counterclockwise and pulling it out. 3. Remove and replace the light bulb with an identical bulb. 4. Reinstall the socket into the bezel.
Specifications NOTE: Specifications are correct at time of printing and are subject to change without notice. ENGINE 14 HP & 16 HP Briggs & Stratton Make Briggs & Stratton Model VanguardrM V-Twin Horsepower 16 HP B 3600 rpm Cylinder 2 BOR 2.
Specifications DIMENSIONS: Overall Length 70.25 in (178 cm) Overall Width 35 in (88.9 cm) Height To Top of Steering Wheel: 40 in (101.6 cm) To Top of Engine Cover: 34 in (86.7 cm) Wheel Base 50.75 in (129 cm) Weight (apx..) Net: 424 Ibs. (192 kg) w/o mower 536 Ibs.
Lawn Care & Mowing Information GENERAL INFORMATION Proper mowing is an important part of maintaining your lawn in the best possible condition. A healthy and well maintained lawn is better able to resist drought, weeds, and other stresses. But too much maintenance is as detrimental to your lawn as neglect.
lawn Care & Mowing Information HOW HIGH TO MOW THE GRASS Often cutting height is a matter of personal prefer- ence. Typically, you should mow the grass when it is is between three and five inches high.
lawn Care & Mowing Information WHEN AND HOW OFTEN TO MOW The time of day and condition of the grass greatly affect the results you’ll get when mowing. For the best results, 0 Mow when the grass is between three and five inches 0 Mow with sharp blades.
Lawn Care & Mowing Information Proper Broadcast Mowing Broadcasting, or side-discharging, disperses fine clip- pings evenly over the entire lawn. Many golf courses use this method. Your mower has a deep dish deck to allow freer circulation of clippings so they are broadcast evenly over the lawn.
Lawn Care & Mowing Information TIPS On Dealing With Clippings Clippings are beneficial to your lawn. A common mis- conception about clippings is that they automatically lead to thatch-this is untr.
Lawn Care & Mowing Information SOLUTIONS FOR COMMON MOWING PROBLEMS Streaking Streaking Streaking is when thin strips of uncut grass are left behind the mower.
Lawn Care & Mowing Information Uneven Cutting Uneven Cutting Uneven cutting is waviness or smooth troughs in the lawn surface. Uneven cutting is usually caused by mower deck damage or misadjustment.
Common International Symbols Fast (Throttle) Slow (Throttle) Throttle + C- &q-t 7 PTO Clutch Engaged Parking Brake Mower Cutting Height Adjustment Technical Manuals Literature Available Operators .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Simplicity 16HP V-Twin c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Simplicity 16HP V-Twin - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Simplicity 16HP V-Twin, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Simplicity 16HP V-Twin va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Simplicity 16HP V-Twin, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Simplicity 16HP V-Twin.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Simplicity 16HP V-Twin. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Simplicity 16HP V-Twin ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
