Manuel d'utilisation / d'entretien du produit CM-525P du fabricant Silicon Optix
Aller à la page of 56
Optix Pro-Pack Dome Camera User Manual Please carefully read these instructions before using this product. Save this manual for future use. CM-525P model no.
.
27104AF 3 OPTIX ® High Speed Dome Camera User Guide No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose. OPENEYE shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.
27104AF 4 W ARNINGS & CAUTIONS W ARNINGS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. - DO NOT EXPOSE THIS PRODUCT T O RAIN OR MOISTURE. - DO NOT INSER T ANY MET ALLIC OBJECTS THROUGH THE VENTILA TION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT . CAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).
27104AF 5 COMPLIANCE ST A TEMENT CE COMPLIANCE ST A TEMENT W ARNING THIS IS A CLASS A PRODUCT . IN A DOMESTIC ENVIRONMENT THIS PRODUCT MA Y CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MA Y BE REQUIRED TO T AKE ADEQUA TE MEASURES. THIS CLASS A DIGIT AL APP ARA TUS COMPLIES WITH CANADIAN ICES-003.
27104AF 6 IMPOR T ANT SAFEGUARDS 1. Do not expose the camera to rain or moisture - The OPTIX camera itself is designed for enclosed use or for use in a location where it is protected from rain and moisture. When exposed to moisture, turn the power off immediately and ask a qualified service personnel for servicing.
27104AF 7.
27104AF 8 T ABLE OF CONTENTS W ARNINGS & CAUTIONS COMPLIANCE ST A TEMENT CE COMPLIANCE ST A TEMENT IMPORT ANT SAFEGURDS INTRODUCTION INST ALLA TION & CONFIGURA TION PROGRAM & OPERA TION PT.
27104AF 9.
27104AF 10 Features This OpenEye OPTIX Pro-Pack Dome Camera is the building block for any surveillance/security system. By using multiple Pre-Packaged dome cameras, no place is too large for monitoring. Extensive and flexible architecture facilitates remote control functions for a variety of external switching devices such as multiplexers and DVRs.
27104AF 11.
27104AF 12 2. INST ALLA TION / CONFIGURA TION OPTIX Pre-Pack Dome (Dome Camera Unit) Ceiling Mount Bracket Joint Pipe Plastic Anchor Screws for Plastic Anchor L-Wrench (M4) L-Wrench (M5) Block Protector Cap Cable (Alarm In/Out) Instruction Manual Silicon Rubber Sealant T eflon T ape 1 1 1 4 4 1 1 1 2 1 1 1 Qty A.
27104AF 13 ON OFF 1 CA MER A 75 TERM 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CON COM2 COM1 CH 1 in CH 2 in CH 3 in CH 4 in CH 5 in CH 6 in CH 7 in CH 8 in CH 9 in CH 10 in CH 11 in CH 12 in CH 13 in.
27104AF 14 2. INST ALLA TION / CONFIGURA TION The Pro-Pack OPTIX dome camera is for use in surface mounting applications. The mounting surface should be capable of supporting loads up to 10lb(4.
27104AF 15 2. INST ALLA TION / CONFIGURA TION The Pro-Pack dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9.
27104AF 16 The dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9. T o prevent damage, each dome camera must have a unique address (ID).
27104AF 17 If a dome camera is to be installed with an OPTIX dome keyboard controller , select the OpenEye OPTIX Protocol. Consult OpenEye technical support if a dome camera is installed with a device other than a keyboard.
27104AF 18 2.2 Connecting Wiring The dome camera can be controlled remotely by an externaI device or control system, such as control keyboard, using RS-485 half duplex, RS-422 duplex or simplex serial communications signaIs. Connect marked RX+, RX- to TX+ and TX- of the RS-485 control system.
27104AF 19 2. INST ALLA TION / CONFIGURA TION 2.3 Getting Started Once installed, apply power to the dome camera. Once power is turned on, the dome camera will start a configuration sequence. When configuration is done, the following information is displayed.
27104AF 20.
27104AF 21 3. PROGRAM & OPERA TION 3.1 Getting Started Before you program or operate OpenEye OPTIX Dome Camera, you must select the dome camera by pressing the dome camera NO + CAM on the OpenEye Keyboard Controller . Example : Pressing 1, 0 and CAM key sequentally will select the dome camera 10.
27104AF 22 3. PROGRAM & OPERA TION A. OPTIX HIGHSPEED DOME MENU MENU SYS INFO DISPLA Y DOME SETUP ALARMS CAMERAS CONFIG LANGUAGE EXIT AREA TITLE PRIV ACY ZONE OSD DISPLA Y VIEW ANGLE POSITION HOME.
27104AF 23.
27104AF 24 4. PTZ SETUP MENU 4.1 HOME After a dome control menu item has been selected, follow the directions below to set the function. The HOME function can be set so that the camera automatically goes to Preset, T our , Pattern, or Auto Scan after the OpenEye Keyboard Controller has been idle for an amount of time.
27104AF 25 4. PTZ SETUP MENU 4.2 SYS INFO The OpenEye OPTIX Camera’s set up menu provides essentiaI information about the dome camera if service is required. When you view this screen, you can determine the camera type and ROM version. The information on this screen can't be modified.
27104AF 26 4. PTZ SETUP MENU 4.3 DISPLA Y If this option is enabled, the nearest area title will be displayed when the camera is moving either by manual operation, AutoScan, or Pattern. The DOME camera’s [OSD DISPLA Y/AREA TITLE] will override this function (Dome Camera’s[OSD DISPLA Y/AREA TITLE] must be turned ON).
27104AF 27 The Privacy Zone allows users to hide up to 8 unwanted views in a camera. B. PRIV ACY ZONE 4. PTZ SETUP MENU HOME SYS INFO DISPLA Y DOME SETUP ALARMS --- OpenEye OPTIX PRE-P ACK --- CAMERA CONFIG LANGUAGE EXIT PRIV ACY ZONE AREA TITLE OSD DISPLA Y VIEW ANGLE POSITION COOLER/HEA TER 1 Select No.
27104AF 28 4. PTZ SETUP MENU AREA OPERA TION D. TIME :005 Z050 ID :0001 (259.38, 047.42) 001 T :+34.0C C H T1 PF D 5 6 7 8 11 2 Area/P-Zone Title : Y ou can see the area title, the privacy zone title has priority over the area title. Time Display : D.
27104AF 29 D. VIEW ANGLE Note : When the dome camera is installed near a wall, panning range can be programmed by users. Flip - Allows the dome camera to automatically turn 180 degrees when the camera tilts to its lower position. Once the camera reaches the floor along a moving object, it willstop.
27104AF 30 HOME SYS INFO DISPLA Y DOME SETUP ALARMS --- OpenEye OPTIX PRE-P ACK --- CAMERA CONFIG LANGUAGE EXIT PRIV ACY ZONE AREA TITLE OSD DISPLA Y VIEW ANGLE POSITION COOLER/HEA TER COOLER/HEA TER SETUP CELSIUS/F AHRENHEIT COOLER MODE HEA TER MODE SA VE EXIT : CELS.
27104AF 31 4.4 DOME SETUP If you need to view specific places routinely , program presets is an ideal function. A preset is a programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once programmed, enter the number and press a preset button on your controller to automatically call up the preset.
27104AF 32 4. PTZ SETUP MENU 3 4 5 Focus & Iris : Auto/Manual Dwell Time : 05~240 sec. Pan/Tilt/Zoom Preset Call: Input the Preset No. (1~319) and then press the PST button to call the preset Preset Erase: Input the Preset No.
27104AF 33 The AUT O SCAN supports up to 8 programmed angles at user-programmable speeds. Follow the steps below to program the AutoScan function. B. AUTO SCAN Cauton If you use quick preset setup, it will overwrite the previous preset. WRITING O.K. Z001ID: 0010 (145.
27104AF 34 4. PTZ SETUP MENU a. Endless (Left): 360 degree endless scan from the left b. Endless (Right): 360 degree endless scan from the right c. Coming and Going : Auto Scan between left limit and right limit (VECT ORSCAN) Select the speed of the Auto scan.
27104AF 35 C. TOUR 1 Select No. HOME SYS INFO DISPLA Y DOME SETUP ALARMS --- OpenEye OPTIX PRE-P ACK --- CAMERA CONFIG LANGUAGE EXIT HOME/PRESET AUTO SCAN TOU R P A TTERN TOUR SETUP NO.
27104AF 36 4. PTZ SETUP MENU 5 Mode & No. Select between 4 different modes and No. (Preset, Auto Scan, T our and Pattern) TOUR SETUP NO. 001 SPEED FREEZE : : F AST : OFF === === === === === === ==.
27104AF 37 4. PTZ SETUP MENU D. P A TTERN The pattern feature records a users control of the selected dome camera for up to 240 seconds. Up to four patterns can be stored and played back by pressing No. + PTRN keys subsequently on your Open- Eye Keyboard controller .
27104AF 38 4. PTZ SETUP MENU 4.6 ALARMS ALARM SETUP NO. 01 02 03 04 05 06 07 08 HOME SYS INFO DISPLA Y DOME SETUP ALARMS --- OpenEye OPTIX PRE-P ACK --- CAMERA CONFIG LANGUAGE EXIT 01 1 NO.
27104AF 39 4.7 CAMERAS Note : This menu feature will depend on the camera module installed in your dome camera. A. FOCUS MODE: AUTO / MANUAL : Use AUT O mode in normal use.
27104AF 40 C. AE CONTROL MODE : FULL AUT O/ SHUTTER FIX/ IRIS FIX/ AGC FIX/ MANUAL IRIS : CLOSE/ F22/ F19/ F16/ FU/ F1 1/ F9.6/ F8.L0/ F6.8/ F5.6/ F4.8/ F4.0/ F3.4/ F2.8/ F2.4/ F1.6/ AUTO GAIN : AUT O /OFF/ 8dB/ 10dB ... / 38dB The AGC (Of f-38 dB) effects only AGC FIX and Manual Mode.
27104AF 41 E. SCREEN SETUP BRIGHTNESS : Y ou can adjust the camera BRIGHTNESS using this mode. (0 ~ 15) SHARPNESS : The higher the value, the more edges in the picture will be enhanced (0 ~ 15) BACKLIGHT : Camera background light (On/Off) F .
27104AF 42 G. DA Y & NIGHT The Day/Night option removes the IR cut fi lter on the camera and makes the camera sensitive to near infrared. When Day/Night is ON, the color model changes to B&W mode automatically . The operator can enable Day/Night for all dome cameras at the same time.
27104AF 43 4. PTZ SETUP MENU 4.8 CONFIG A. INIT DA T A 1. INIT . ALL Erase all stored data from the Flash ROM of the selected dome camera (Factory Default). Y ou will then be asked to enter Y es or No. If you intend to erase all data then press the ENT/HOME Key , otherwise press the CLR/ESC key to exit without erasing.
27104AF 44 B. DOME RESET This feature is used to reset the micro processor of the dome camera. The main power will be turned OFF and then ON again during this process. C. RELOAD ID This feature is used to reload the ID of a selected dome camera after changing the ID without Power Off.
27104AF 45 4.9 EXIT 1. T o exit the main menu, select the CLR / ESC key or select the MENU / LOCK button. 2. Exit the main menu by selecting EXIT mode 4.
27104AF 46.
27104AF 47 5. TECHNICAL SPECIFICA TIONS Camera: CM-525P Minimum Illumination Lens S/N ratio Minimum Object Distance General Certi fi cation Image Sensor NTSC P A L Horizontal Resolution Pan Angle Man.
27104AF 48 6. DIMENSIONS OpenEye OPTIX Pro-Pack Dome Camera Ceiling Pipe mm mm 5.9” [150] 1-1/4” NPT PIPE Thread 4.9” [124] 4.9” [124] 4- o 4.3”[1 1] 1-1/4” PT -Thread 1-1/4” PT -Thread 1.8” [45] 7.9” [200] 10.8” [273.8] 6.7” [170] .
27104AF 49 APPENDIX A - TROUBLESHOOTING If problems occur , verify the installation of the camera with the instructions in the manual and with other operating equipment. Isolate the problem to speci fi c pieces of equipment in the system and refer to the equipment manual for further information.
27104AF 50 APPENDIX B - OPTIONAL ITEMS A. P ARAPET W ALL (SWING ARM) & MOUNT BRACKET B. P ARAPET ROOF T OP MOUNT BRACKET C. INDOOR / OUTDOOR HOUSING 21.99” [558] 3.31” [84] 2-m10Xp1.5-BOL T .59” [15] 4-M10Xp1.5-NUT 8.67” [220] 1 1.03” [280] 1.
27104AF 51 APPENDIX B - OPTIONAL ITEMS D. CORNER MOUNT ADAPTOR E. ROOF MOUNT ADAPTOR F . POLE MOUNT ADAPT OR 1 14.3 160.0 7.88” [200] 3.94” [100] 6.3” [160] 4.5” [1 14.3] 4-M8X1.25 NUT 4.33” [1 10] o.433” [1 1] 8.27” [210] 6.51” [165.1] 6.
27104AF 52 APPENDIX B - OPTIONAL ITEMS G. FLUSH MOUNT ADAPTOR H: W ALL MOUNT ADAPTOR 7.8” [200] 4.73” [120] 3.15” [80] 8.67” [220] 1 1.74” [298] 4.5” [8] 8” [203] 1.58” [40] 4.5” [1 14.3] 3.15” [80] 6.51” [165.1] 6” [152.4] .8” [20] .
27104AF 53.
27104AF 54.
27104AF 55.
27104AF 56 pen ® Eye © 2007 Openeye Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Openeye Inc. The information in this publication is believed to be accurate in all respects. However , Openeye cannot assume responsibility for any consequences resulting from the use thereof.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Silicon Optix CM-525P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Silicon Optix CM-525P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Silicon Optix CM-525P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Silicon Optix CM-525P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Silicon Optix CM-525P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Silicon Optix CM-525P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Silicon Optix CM-525P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Silicon Optix CM-525P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
