Manuel d'utilisation / d'entretien du produit Print/Scanner/Storage Wireless Server PRICOM C-6400W du fabricant Silex technology
Aller à la page of 101
Users Manual CX2 WA01040XA ENG_200501.
Users Manual SX2 Contents 1, Introduction ............................................................................................ 1-1 Safety Instructions ........................................................................................ 1-3 2, PRICOM C-6400W .
Users Manual SX2 4, Scanner Server ....................................................................................... 4-1 Initial set up .................................................................................................. 4-2 Connect the PRICOM C-6400W and USB scanner.
Users Manual SX2 6, Q&A ......................................................................................................... 6-1 The main menu does not start after Inserting the CD-ROM ..................... 6-1 The PRICOM C-6400W is not found in the configuration utility .
1-1 Introduction Users Manual CX2 1, Introduction Thank you for purchasing this product. This manual provides information on how to configure and use the PRICOM C-6400W. Make sure to read all safety instructions carefully and fully understand them before starting to use the PRICOM C-6400W.
1-2 Introduction Users Manual CX2 Symbols used in this manual This manual uses the following symbols to point out specific information. The information after the symbols should always be observed. Refer to “Safety Instructions” for the product safety information.
1-3 Introduction Users Manual CX2 - This is the prohibit symbol. - This symbol will include another symbol or have a picture near it to indicate what is prohibited. Safety Instructions To ensure safe and proper use, please read the following information carefully before starting to use our product.
1-4 Introduction Users Manual CX2 - If the printer has a ground wire, it must be used to prevent electrocution and power surges. - If this product is detached from the printer, unplug the power to the printer before reconnecting. - Keep the cables away from children.
1-5 Introduction Users Manual CX2 Danger - Do not use this product with the cover removed. You may receive an electric shock. - Do not attempt to check, adjust or repair this product by yourself. You may receive an electric shock. Check with your dealer if the product needs to be repaired.
1-6 Introduction Users Manual CX2 Warning - Do not use this product with the cover removed. You may receive an electric shock.When unplugging this product do not pull on the cord. The cord may break resulting fire and/or electric shock. Pull on the plug only.
1-7 Introduction Users Manual CX2 Warning Observe the following instructions while using this product. - When the product will not be used for an extended time, disconnect and unplug the power cable. - Verify all cables are connected properly before using this product.
2-1 PRICOM C-6400W Users Manual CX2 2, PRICOM C-6400W The PRICOM C-6400W is mini wireless print server/scanner server/storage server with a USB connection for Canon. This product supports Canon bubble jet printer, CAPT monochrome/color laser printer and MFP.
2-2 PRICOM C-6400W Users Manual CX2 Emission Notice PRICOM C-6400W This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2-3 PRICOM C-6400W Users Manual CX2 Environment The following are needed for the PRICOM C-6400W. The followings are objects that connect to the network.
2-4 PRICOM C-6400W Users Manual CX2 <Top/Front Side> The LED’s have the following meaning: Status LED (Orange) Flashes during data transfer. Link LED (Green) Lights when an OldAdHoc mode network connection is established. Lights when an AdHoc mode network connection is established.
2-5 PRICOM C-6400W Users Manual CX2 <Right Side> USB Port Connect a USB Cable (A Type connector) Power Connector Connect AC adapter <Front Side> Push Switch The push switch is used to restore Factory Defaults and change to Infrastructure mode.
2-6 PRICOM C-6400W Users Manual CX2 Start in Infrastructure mode - It is possible to put the PRICOM C-6400W into Infrastructure mode and connect to an access point if the access point does not use WEP. 1 . With the PRICOM C-6400W set to factory default, verify the Link LED is on after the connecting the AC adapter to the PRICOM.
2-7 PRICOM C-6400W Users Manual CX2 How to Connect Connect the PRICOM C-6400W to Printer and Network - If the PRICOM C-6400W has been used in another network environment, restore to factory default. - The PRICOM C-6400W cannot connect to a USB hub. The PRICOM C-6400W needs the following to connect to a network.
2-8 PRICOM C-6400W Users Manual CX2 4. Make sure that printer is working and turned on. - Using an AC adapter other than the one provided with the PRICOM C-6400W can cause damage. - Connect only to a printer/Canon MFP. - Wait for 2 or more seconds after connecting/disconnecting the USB cable.
2-9 PRICOM C-6400W Users Manual CX2 Other Functions The other functions of the PRICOM C-6400W are shown below. Function Assign the IP address automatically using DHCP, BOOTP and RARP - DHCP/BOOTP If a DHCP/BOOTP server is working on your network, the DHCP/BOOTP protocol of the PRICOM C-6400W will assign the IP address to the PRICOM C-6400W.
2-10 PRICOM C-6400W Users Manual CX2 - IP Filter The PRICOM C-6400W allows to accept/deny the communication from a pre-registered IP address scope. IP filtering can protect illegal access from unexpected network client users.
2-11 PRICOM C-6400W Users Manual CX2 Specification Hardware specification CPU V850 CPU (40MHz) Memory RAM :8MByte Flash ROM :1MByte Network Interface IEEE802.
2-12 PRICOM C-6400W Users Manual CX2 Support Protocol TCP/IP,NetBEUI/NetBIOS TCP/IP Network layer :ARP, RARP, ICMP, IP Transport layer :TCP, UDP Presentation layer :WINS Application layer :LPR, TELNET, BOOTP, SNMP, HTTP, DHCP, IPP, #9100, NetBIOS over TCP - You can assign IP address via our original utility.
2-13 PRICOM C-6400W Users Manual CX2 This product operates at 2.4GHz No radio license is required to use this product. Take note of the following points.
2-14 PRICOM C-6400W Users Manual CX2 Wireless Equipment for 2.4GHz band This band of equipment is used by the microwave, industry, science, medical equipment and licensed in room or low power (non licensed) radio stations. - Before you use this equipment, verify that it will not interfere with other broadcasting.
2-15 PRICOM C-6400W Users Manual CX2 - The PC connects directly to our product in Ad hoc mode. <Ad hoc mode> Each wireless product connects directory.
2-16 PRICOM C-6400W Users Manual CX2 <Infrastructure mode> In Infrastructure mode the PRICOM C-6400W connects through an access point. An Access point allows communication between wired and wireless environments. Connect the PRICOM C-6400W to the printer/scanner/MFP using a USB cable.
3-1 Users Manual CX2 PRICOM User Software CX2 Load the PRICOM User Software CX2 CD into the CD-ROM drive of your Windows PC. The Menu screen will automatically appear. - If the screen does not appear automatically, execute Autorun.exe from the CD (D:Autorun.
3-2 Users Manual CX2 PRICOM User Software CX2 ( 3)Print Utility Setup Set up the PRICOM-Print CX2 utility to use the print server function. ( 4)Scan Utility Setup Set up the PRICOM USB Utility to use the scanner function. Online manual View the PRICOM C-6400W's online manual.
3-3 Users Manual CX2 PRICOM User Software CX2 How to Communicate to the PRICOM C-6400W Procedure for initial communication with the PRICOM C-6400W The following explains how to initially communicate with the PRICOM C-6400W until the wireless parameters are configured.
3-4 Users Manual CX2 PRICOM User Software CX2 Set up using the PRICOM Setup Utility To configure the parameters in Windows 2000 / Windows XP you must login as Administrator. Also before configuring the PRICOM C-6400W, it is recommended that you connect the PRICOM C-6400W to a printer.
3-5 Users Manual CX2 PRICOM User Software CX2 3. Click Yes if you agree to the SOFTWARE LICENSE AGREEMENT . - If you do not agree to the license agreement, you cannot use our products. 4 . Verify the PC's wireless settings match those on the PRICOM C- 6400W.
3-6 Users Manual CX2 PRICOM User Software CX2 6. Configure the address for the PRICOM C-6400W. Then click Next . - We recommend assigning a static IP address. - To assign the address using a DHCP/ BOOTP server, select Get IP Address Automatically . 7.
3-7 Users Manual CX2 PRICOM User Software CX2 The PRICOM C-6400W configuration is now complete. You can continue to install "PRICOM-Print CX2" print utility and/or the "PRICOM USB Utility" scanner utility.
3-8 Users Manual CX2 PRICOM User Software CX2 11 . Select a folder to install to, and then click Next . - The default folder is "c:Program Filessilex technologyPRICOM CX2" - Choose Browse to select a different folder. 12. Select a GROUP name and click Next .
3-9 Users Manual CX2 PRICOM User Software CX2 14. Select the printer driver for the printer connected to the PRICOM C-6400W. Click Next . - If you cannot find the printer driver you want to use in the list, you do not have to install a printer driver right now.
4-1 Scanner Server Users Manual CX2 4, Scanner Server This section explains how to use the PRICOM C-6400W's scanner server function. A Canon MFP's scanner function can be shared across the network using the PRICOM C- 6400W. - The PRICOM USB Utility is compatible with Windows 2000, Windows XP.
4-2 Scanner Server Users Manual CX2 Initial set up Connect the PRICOM C-6400W and USB scanner Connect the PRICOM C-6400W and the USB scanners to allow scanning across the Network. - The PRICOM C-6400W will support the scanner function of the Canon MFP.
4-3 Scanner Server Users Manual CX2 Use the Scanner Server If you want to use the Canon MFP scanner function via a network, install the PRICOM USB Utility . The PRICOM USB Utility can connect a PC to the PRICOM C-6400W, allowing the PC to recognize the scanner function.
4-4 Scanner Server Users Manual CX2 4. Verify the installation folder, click Next . - The default installation folder is "c:Program Filessilex technology PRICOM USB Utility". Choose Browse , to select another folder. 5 . Verify the GROUP name and click Next .
4-5 Scanner Server Users Manual CX2 8. Click Finish . The PRICOM USB Utility installation is complete. The next section will explain how to configure the PRICOM USB Utility. 7. Specify an application program which starts automatically after the PRICOM USB Utility has connected to the scanner.
4-6 Scanner Server Users Manual CX2 Click Search . Use the PRICOM USB Utility Start the PRICOM USB Utility and configure it to use scanner via the network. 1. Click start - All Programs - PRICOM USB Utility - PRICOM USB Utility. When using the PRICOM USB Utility for the first time, the screen to the right is displayed.
4-7 Scanner Server Users Manual CX2 - Do not disconnect the USB cable or click Disconnect in the PRICOM USB Utility while the scanner is in use. This may cause the PC or the scanner to become unstable. If either happens, restart the C-6400W, scanner, and PC and then use them again.
4-8 Scanner Server Users Manual CX2 5 . After using the scanner, click Disconnect to terminate the connection and close the PRICOM USB Utility. - The connection will be terminated automatically if the network scanner is not used for 10 minutes.
4-9 Scanner Server Users Manual CX2 The PRICOM USB Utility This section will explain the options available in the PRICOM USB Utility The PRICOM USB Utility screen When starting the PRICOM USB Utility, the main screen will appear. <Main Screen> Server to be connected Server name registered Display the product to use.
4-10 Scanner Server Users Manual CX2 The Option Dialog Click Option on the main screen to bring up the Options screen. <General> Window configuration Register at Startup Register the USB Utility at startup (Default: OFF) Start without Window Minimize the USB Utility when started (Default: OFF).
4-11 Scanner Server Users Manual CX2 <Notification> Notification When the status of the scanner server changes, the PRICOM USB Utility can notify you by message and/or by sound (Default: Message ON/Sound OFF). "When changing mode from waiting to connecting" Notify you when the PC connects to the scanner server.
Storage Server 5-1 Users Manual CX2 5, Storage Server This section explains how to share a memory card in a Canon MFP's slot using NetBEUI and NetBIOS over TCP/IP. - Refer to the Canon MFP manual for information about compatible memory cards and how to attach the card.
Storage Server 5-2 Users Manual CX2 Install the PRICOM C-6400W and Canon MFP The PRICOM C-6400W connect to a Canon MFP via a USB cable. The PRICOM C-6400W communicates in a network environment. - Do not disconnect the USB cable/Memory Card while accessing storage device.
Storage Server 5-3 Users Manual CX2 Share the Memory Card Via the Network In order to read/write to a memory card in a Canon MFP via the network, NetBEUI and Client for Microsoft Networks must be on your PC.
Storage Server 5-4 Users Manual CX2 Verify the network configuration in Windows 98/Me (NetBIOS over TCP/IP) Verify that Client for Microsoft Networks and TCP/IP are added in the Network configuration on Windows 98/Me and NetBIOS over TCP/IP is enabled in TCP/IP in property.
Storage Server 5-5 Users Manual CX2 4. Click the memory_card on memory card folder. 1. Connect a memory card to the Canon MFP's card slot. 2 . Click the Network Neighborhood icon on desktop, select Printservers in WORKGROUP. 3. Click the PRICOM's icon.
Storage Server 5-6 Users Manual CX2 Verify the network configuration in Windows 2000 (NetBEUI) Verify that "NetBEUI Protocol" and "Client for Microsoft Networks" have been added in the network configuration of Windows 2000. 1. Select Start - Settings - Control Panel - Network and Dial-up Connections .
Storage Server 5-7 Users Manual CX2 Verify the network configuration in Windows 2000 (NetBIOS over TCP/IP) Verify that Network - Internet Protocol(TCP/IP) - Client for Microsoft Networks has been added as well as NetBIOS Internet Protocol(TCP/IP). 1. Select Start - Settings - Control Panel - Network and Dial-up Connections .
Storage Server 5-8 Users Manual CX2 Open the memory card in a Windows 2000 environment 1. Connect a memory card to the Canon MFP's card slot. 2 . Click My Network Places - Entire Network , and open the Printservers in workgroup. 3. Click the PRICOM's icon.
Storage Server 5-9 Users Manual CX2 Verify that NetBIOS in Internet Protocol (TCP/IP) on Windows XP, and Client for Microsoft Networks have been added. 1. Select start - Control Panel - Network Connections. 2 . Open the properties of Local Area Connection .
Storage Server 5-10 Users Manual CX2 - If you cannot find Client for Microsoft Networks in the list, click Install then select Client - Client for Microsoft Networks . 4 . Make sure Client for Microsoft Networks has been added. - If you use NetBIOS over TCP/IP protocol in Windows XP, uncheck Protect my computer and .
Storage Server 5-11 Users Manual CX2 Open the memory card in a Windows XP environment 1. Connect a memory card to the Canon MFP's card slot. 2 . Click My Network Places - View workgroup computers - Microsoft Windows Network , open the Print servers in workgroup.
6-1 Q&A Users Manual CX2 6, Q&A This section contains some Frequently Ask Questions (FAQ) and the corresponding answers. For a more detailed and up to date FAQ refer to our web page: http://www.silex.jp/. The main menu does not start after inserting the CD-ROM 1.
6-2 Q&A Users Manual CX2 Example) Execute the ping on MS-DOS of Windows 98 To execute the ping XXX.XXX.XXX.XXX command click Start - Program - MS-DOS prompt , then enter the ping comman d ( XXX.XXX.XXX.XXX is IP address for the PRICOM). <Response from ping> Reply from XXX.
6-3 Q&A Users Manual CX2 Occasionally I cannot print 1. If a DHCP/BOOTP server or RARP server resides on the network, the IP addresses are assigned automatically, which may rewrite the IP address that you have manually assigned to the PRICOM C-6400W.
6-4 Q&A Users Manual CX2 1. Check the following and retry. - Can you use the card in another Canon MFP? - Is the memory card supported in the Canon MFP? - Is the memory card attached to the card s.
1 Appendix Users Manual CX2 How to use USB memory This section will explain how to configure the PRICOM C-6400W by using USB memory. By connecting USB memory to the PRICOM C-6400W, the wireless and TCP/IP settings saved on the USB memory will configure the PRICOM C-6400W.
2 Appendix Users Manual CX2 4. Connect the USB memory to the PC, click Next . - Refer the USB memory documentation. 5. Select the USB memory drive, click Next . 6. Configure the TCP/IP parameters, click Next . 3 . Click Yes, if you agree to the SOFTWARE LICENSE AGREEMENT .
3 Appendix Users Manual CX2 9. Remove the USB memory from your PC. Click Next . 10 Disconnect the AC adapter from the PRICOM C-6400W. Attach the Memory card to the USB port of the PRICOM C-6400W. 8. Verify each parameter. Click Execute . The parameters will be saved to the USB memory.
4 Appendix Users Manual CX2 1 1 . Connect the USB memory to the PRICOM C-6400W, and boot the PRICOM C-6400W. Click Next . - The PRICOM C-6400W will read the configuration saved on USB memory and then will reboot. The PRICOM C- 6400W will take about 15 seconds to reboot.
5 Appendix Users Manual CX2 14. Click Next . 13. Click Next . - If you check PRICOM USB Utility , you can install the PRICOM USB Utility after installing the PRICOM- Print CX2. Refer to 4. Scanner Server for instructions on how to install the PRICOM USB Utility.
6 Appendix Users Manual CX2 17. Click Start . 16. Verify the group name, click Next . - The default group name is the PRICOM- Print CX2. You can change the name to anything you want.
7 Appendix Users Manual CX2 20. Select the PRICOM, that you want to set up, and click Next . 21. Assign the printer port name and click Next . 2 2 . In the next step, the selected configuration will be displayed for you to check. If the configuration is correct, click Finish to implement it.
8 Appendix Users Manual CX2 25. Click Finish. The PRICOM C-6400W configuration is complete. Restart your PC, and try a TEST print. If you set up another PC, you do not need to configure the PRICOM C-6400W. Select [(3)Print Utility Setup] on menu screen and install the PRICOM- Print CX2.
9 Appendix Users Manual CX2 Write configuration information using an editor. 1. Connect the USB memory your PC. 2. Description of configure file. You can create a description file in Windows notepad.
10 Appendix Users Manual CX2 3. File name If you create the configuration file using an editor, save as [config.txt] or cfgxxxxxx.txt. (xxxxxx is last 6 digits of the Ethernet Address for the PRICOM C-6400W). Example for saving the configure file 1. Save [config.
11 Appendix Users Manual CX2 This section explains how to print using the Windows print function. - If you use the Windows printing function, you cannot use the Canon printer driver monitor function. - To configure the PRICOM C-6400W in Windows 2000, Windows XP you must have Administrator rights.
12 Appendix Users Manual CX2 - The following example used Windows XP. If you use Windows 2000, the screens will be different. - To configure the PRICOM, you must be Administrator. 1. Click start - Control Panel - Printers and Faxes - Add a printer to start the wizard to add a printer.
13 Appendix Users Manual CX2 4. Click Next . 5 . Input the IP address for the printer name . If you do not want to assign a port name, use the default name (IP_xxx.
14 Appendix Users Manual CX2 7. Select LPR, check the LPR and input lp in Queue name and check LPR Byte Counting Enabled. Click OK . - The OK will return you to number 6.
15 Appendix Users Manual CX2 10. If Use existing Driver appears, select Keep existing driver (recommended) or Replace existing driver . Click Next . - If you have not installed the latest driver, select Replace existing driver. 11. Select default printer.
16 Appendix Users Manual CX2 1 4 . Verify the configuration and click Finish . If test print has been printed, the configuration was successful. 13 . Select Yes to print a test print.
17 Appendix Users Manual CX2 - If you use a LPR port to print, you will need to add the LPR Port. Open the start - Settings - Control Panel - Add or Remove Programs . Click the Add/Remove Windows Components . Windows components are displayed, select other Network file and Printing service - Detail - UNIX printing service , and click the OK .
18 Appendix Users Manual CX2 4. Input the IP address of the PRICOM for server name, input lp for the queue name. Click OK . 5. Select an appropriate printer in the list and click Next . 6. If Use existing Driver appears, select Keep existing driver (recommended) or Replace existing driver .
19 Appendix Users Manual CX2 7. Enter a printer name. Select whether this will be the default printer or not. Click Next . 8 . Select whether or not to share the printer and click Next .
20 Appendix Users Manual CX2 10 . Verify the proper configuration, and click Finish . If test page has been printed, set up is completed..
21 Appendix Users Manual CX2 Print using the Windows XP LPR port - In order to print using a LPR, the LPR port must be added. Go to start-Control Panel-Add or Remove Programs-Add/Remove Windows Components and open Windows Components Wizard .
22 Appendix Users Manual CX2 3. Select Create a new port in Select a Printer Port and create a new port. Select LPR Port and click Next . - If the destination print port was created when installing the PRICOM, select the port from Use the following port and click Next .
23 Appendix Users Manual CX2 7. At Name your printer , add the printer name to be used in Windows XP. Select whether to use this printer as a default printer or not, then click Next . 8. Select Share name or Do not share this printer according to your environment on the Printer Sharing .
24 Appendix Users Manual CX2 This section will explain how to print using IPP in Windows environments. - To configure you shouted log in as Administrator. - The example is for Windows XP. If you use Windows 2000, the screens may be different. 1. Select start - Control Panel - Printers and Faxes .
25 Appendix Users Manual CX2 3. Select Connect to a printer on the Internet or o n a home or office network . And enter the IP address or the URL for the PRICOM port. Click Next . Example: URL is [abc.com] http://abc.com/ipp/lp else http://abc.com/ipp IP address is 192.
26 Appendix Users Manual CX2 Connect to the PRICOM C-6400W from a Web browser It is possible to view the parameters of the PRICOM C-6400W or printer status via web browser. - To connect to the PRICOM C-6400W via Web browser, An IP address must have been already assigned to the PRICOM C-6400W.
27 Appendix Users Manual CX2 The PRICOM C-6400W HTTP screen <Printer Status> The printer status is displayed as well as the printer name. <System Status> The set up parameters for the PRICOM C-6400W are displayed.
28 Appendix Users Manual CX2 <PrintServer> The parameters can be changed for the PRICOM C-6400W from web browser. - Input root for the username then click OK , or enter the password if you have created one. The default is no password (Blank). <Restart PrintServer> If you are done, select Yes , the PRICOM C-6400W is restarted.
29 Appendix Users Manual CX2 <Factory Default> If you select Yes , the PRICOM C-6400W is restored to factory default. <silex technology,Inc.> You can access to our web page from the link. If you have any questions, visit our web site for support information.
30 Appendix Users Manual CX2 Other functions - For further details on how to use the PRICOM C-6400W Web browser, TELNET or the procedure to change the PRICOM C-6400W configuration, refer to "Connect to the PRICOM C-6400W from a Web browser" or "TELNET" in this section.
31 Appendix Users Manual CX2 TELNET After the IP address has been configured, you can configure the TCP/IP, SNMP parameters in the PRICOM C- 6400W using TELNET. You can configure the PRICOM C-6400W using a command line. The following is example for each menu.
32 Appendix Users Manual CX2 - An example of Configure General menu[1] No. Item Value (level.2) ---------------------------------------------------------------------- 1 : Change root Password : ".
33 Appendix Users Manual CX2 - An example of WINS[4] No. Item Value (level.3) ---------------------------------------------------------------------- 1 : Primary Server : 0.0.0.0 2 : Secondary Server : 0.0.0.0 3 : Scope ID : "" 99 : Back to prior menu Please select(1 - 99)? - An example of IP Filter Config[5] No.
34 Appendix Users Manual CX2 - An example of Configure SNMP[7] No. Item Value (level.2) ---------------------------------------------------------------------- 1 : Authentic Community : "***************" 2 : Trap Community : "public" 3 : Trap Address(IP) : 0.
35 Appendix Users Manual CX2 - An example of executeing Reset Settings to Defaults[97] Reset Settings to Defaults 1 : YES 2 : NO Please select(1 - 2)? - An example of restarting Print Server Settings[.
36 Appendix Users Manual CX2 Setting the PRICOM C-6400W parameters This section explains the parameters in the PRICOM C-6400W. - General parameter Check and Verification of the PRICOM C-6400W Exp lain Facto r y De faul t Pleas e enter the pas s w ord( in A S CII TEXT).
37 Appendix Users Manual CX2 - TCP/IP parameter Exp lain Factor y De fault E nable/D is able D HC P /B O O T P protoc ol operations . D HC P /B O O T P is a protoc ol, vi a w h ic h I P ad dres s g ets as s igned by the B O O T P s erver or D HC P s erver.
38 Appendix Users Manual CX2 - SNMP parameter - NetBEUI/NetBIOS parameter T opic Expla in Fac tory D e fault NetBE UI P r otoc ol E nable/D is able NetBE U I pr otoc ol operations E NA BLE NetBI O S over T C P E nable/Dis able N etB I O S over T C P pr otoc ol operations ENA B LE C om puter N am e S pec ify a c om puter nam e.
1 User Registration Users Manual CX2 User Registration For future technical support, we recommend you to register with us as a user on-line at: Global Site; http://www.silex.jp/register/ USA Site; http://www.silexamerica.com/us/regist/index.html EU Site; http://www.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
