Manuel d'utilisation / d'entretien du produit XL-MP150E du fabricant Sharp
Aller à la page of 48
MICR O COMPONENT SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-MP150E Micro Component System consisting of XL-MP150E (main unit) and CP-MP150E (speaker system).
03/12/17 XL-MP150E 02-08.fm 2 XL-MP150E General Information Special note s Warning: When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control.
03/12/17 XL-MP150E 02-08.fm 3 XL-MP150E General Information Special note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue.
03/12/17 XL-MP150E 02-08.fm 4 XL-MP150E General Information Precautions General Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment.
03/12/17 XL-MP150E 02-08.fm 5 XL-MP150E General Information Controls and indicators Front panel Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. Timer Indicator . . . . . . . . . . . .
03/12/17 XL-MP150E 02-08.fm 6 XL-MP150E 3 4 1 2 General Information Controls and indicators (continued) Display Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. MP3/WMA Folder Indicator . . . .
03/12/17 XL-MP150E 02-08.fm 7 XL-MP150E General Information Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . .
03/12/17 XL-MP150E 02-08.fm 8 XL-MP150E Preparation for Use System connections RATED SPEAKER IMPEDANCE: 6 OHMS MIN. AC INPUT ANTENNA RIGHT RIGHT LEFT FM 75 OHMS AM LOOP VIDEO/AUX IN SUBWOOFER PRE-OUT .
03/12/17 XL-MP150E_09-18.fm 9 XL-MP150E Preparation for Use Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket.
03/12/17 XL-MP150E_09-18.fm 10 XL-MP150E Preparation for Use System connections (continued) A C power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.
03/12/17 XL-MP150E_09-18.fm 11 XL-MP150E Preparation for Use Remote control Battery installation Precautions for battery use: Replace all old batteries with new ones at the same time. Do not mix old and new batteries. Remove the batteries if the unit will not be used for long periods of time.
03/12/17 XL-MP150E_09-18.fm 12 XL-MP150E Basic Operation General control To turn the power on Press the ON/ST AND-BY button to turn the power on. Illumination light control When the power is turned on, light illuminates around the display .
03/12/17 XL-MP150E_09-18.fm 13 XL-MP150E Basic Operation Setting the clock In this example, the clock is set for the 24-hour (0:00) display. T o confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear f or about 10 seconds.
03/12/17 XL-MP150E_09-18.fm 14 XL-MP150E CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc This system can play bac k a standard CD , CD-R/RW in the CD f or mat and CD-R/RW with MP3 or WMA files, but cannot record on them.
03/12/17 XL-MP150E_09-18.fm 15 XL-MP150E CD or MP3/WMA disc Playback Playbac k will begin from track 1 on DISC 1. After that disc fin- ishes playing, the ne xt disc will automatically play . After the last track on the fifth disc is pla yed, the unit will stop automatically .
03/12/17 XL-MP150E_09-18.fm 16 XL-MP150E CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc (continued) V arious disc functions Notes for CD: Notes for MP3/WMA discs: T rack up/tr ack do wn is possible only within individual discs. The sound is heard during fast f orward/fast re verse with a CD , but not with an MP3/WMA disc.
03/12/17 XL-MP150E_09-18.fm 17 XL-MP150E CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback To specify a disc to play You can play a disc by specifying the disc number. Playback will begin from track 1 on the chosen disc. After the last track on the chosen disc is pla yed, the unit stops automatically .
03/12/17 XL-MP150E_09-18.fm 18 XL-MP150E CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback (continued) Repeat play Repeat play can pla y all 5 discs, all trac ks on a chosen disc, or a programmed sequence continuously . To cancel repeat play: Press the / button again.
03/12/17 XL-MP150E 19-28.fm 19 XL-MP150E CD or MP3/WMA disc Playback Programmed play You can choose up to 32 selections for playback in the order you like. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control.
03/12/17 XL-MP150E 19-28.fm 20 XL-MP150E CD or MP3/WMA disc Playback MP3/WMA navigation (onl y for MP3/WMA files) MP3/WMA navigation: Y ou can search and pla y files by folder or title .
03/12/17 XL-MP150E 19-28.fm 21 XL-MP150E CD or MP3/WMA disc Playback File search (by folder or title 1/2/3) Y ou can search and pla y files by folder or title 1/2/3 within one MP3/ WMA disc.
03/12/17 XL-MP150E 19-28.fm 22 XL-MP150E CD or MP3/WMA disc Playback MP3/WMA navigation (onl y for MP3/WMA files) (continued) Character searc h (for f older or title 1/2/3) By entering a name, you can search files b y folder or title 1/2/3 within one MP3/WMA disc.
03/12/17 XL-MP150E 19-28.fm 23 XL-MP150E CD or MP3/WMA disc Playback Programmed play (for folder, title 1/2/3) Folders or titles can be prog rammed within one MP3/WMA disc. Folder , title 1, title 2 and title 3 cannot be programmed together simultaneously .
03/12/17 XL-MP150E 19-28.fm 24 XL-MP150E Radio Listening to the radio Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated.
03/12/17 XL-MP150E 19-28.fm 25 XL-MP150E Radio Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Note: The backup function protects the memorised stations f or a fe w hours should there be a power f ailure or the AC pow er lead become disconnected.
03/12/17 XL-MP150E 19-28.fm 26 XL-MP150E Tape Playback Listening to a cassette tape Tape playback Auto power on function: When you press any of the following buttons, the unit turns on. TAPE button (main unit and remote control): The unit turns on and the "TAPE" function is activated.
03/12/17 XL-MP150E 19-28.fm 27 XL-MP150E Tape Recording Various tape functions Caution: To remove the cassette, press the (TAPE ) button, and then open the compartment. If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open.
03/12/17 XL-MP150E 19-28.fm 28 XL-MP150E Tape Recording Recording on a cassette tape (continued) Recording fr om a CD or MP3/WMA disc Y ou can record the desired disc using the CD DIRECT PLA Y button. To stop recording: Press the (TAPE ) button. The disc and tape will stop .
03/12/17 XL-MP150E 29-44.fm 29 XL-MP150E Tape Recording Sequential recording fr om several discs: To perform programmed recording: To stop recording: Press the (TAPE ) button. The disc and tape will stop . Note: To record on both sides, begin with side A.
03/12/17 XL-MP150E 29-44.fm 30 XL-MP150E Advanced Features Listening to sound from a USB-connected PC System requirements Connect a PC to the USB por t.
03/12/17 XL-MP150E 29-44.fm 31 XL-MP150E Advanced Features The unit is detected and a driver (included with the OS) is installed. Follow the on-screen instructions . (Screen shorts vary depending on the OS. The screen shots below are from Windows 98 Second Edition.
03/12/17 XL-MP150E 29-44.fm 32 XL-MP150E Advanced Features Listening to sound from a USB-connected PC (continued) Checking a driver After installation, make sure the driver is recognised.
03/12/17 XL-MP150E 29-44.fm 33 XL-MP150E Advanced Features Listening to audio data playing on a PC Notes: 1 Connect the unit to the PC with a USB cable (see page 30). 2 Turn on a PC to boot the OS. Wait until the OS boots. 3 Press the ON/STAND-BY button on the main unit to turn the power on.
03/12/17 XL-MP150E 29-44.fm 34 XL-MP150E Advanced Features Listening to sound from a USB-connected PC (continued) Useful function with Windows Media Player or iTunes player You can use the following buttons on the unit or remote control to op- erate the Windows Media Player or iTunes player.
03/12/17 XL-MP150E 29-44.fm 35 XL-MP150E Advanced Features Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD , tuner , tape) at a preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time.
03/12/17 XL-MP150E 29-44.fm 36 XL-MP150E Advanced Features Timer and sleep operation (continued) 4 Within 10 seconds, press the or button to se- lect "ONCE SET" or "DAILY SET", and press the MEMORY/ SET (MEMORY) button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET (MEMORY) button.
03/12/17 XL-MP150E 29-44.fm 37 XL-MP150E Advanced Features Note: Checking the timer setting in the timer stand-b y mode: Cancelling the timer setting in the timer stand-by mode: Reusing the memorised timer setting: The timer setting will be memorised once it is entered.
03/12/17 XL-MP150E 29-44.fm 38 XL-MP150E Advanced Features Timer and sleep operation (continued) Sleep operation The radio, compact disc and cassette tape can all be turned off au- tomatically. To confirm the remaining sleep time: To cancel the sleep operation: Press the ON/STAND-BY button whilst "SLEEP" is indicated.
03/12/17 XL-MP150E 29-44.fm 39 XL-MP150E Advanced Features Enhancing your system The connection lead is not included. Purchase a commercially avail- able lead as shown below. Auto power on function: When you press any of the following buttons, the unit turns on.
03/12/17 XL-MP150E 29-44.fm 40 XL-MP150E Advanced Features Enhancing your system (continued) Subwoofer connection When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass.
03/12/17 XL-MP150E 29-44.fm 41 XL-MP150E References Cassette deck Tuner Remote control USB Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.
03/12/17 XL-MP150E 29-44.fm 42 XL-MP150E References Troubleshooting chart (continued) If trouble occurs When this product is subjected to strong external interference (me- chanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.
03/12/17 XL-MP150E 29-44.fm 43 XL-MP150E References Maintenance Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
03/12/17 XL-MP150E 29-44.fm 44 XL-MP150E References Specifications As par t of our policy of continuous improv ement, SHARP reser ves the right to make design and specification changes f or product improv ement without prior notice. The performance specification fig- ures indicated are nominal values of production units .
MEMO.
MEMO.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORATION OF AUSTRALIA.
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sharp XL-MP150E c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sharp XL-MP150E - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sharp XL-MP150E, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sharp XL-MP150E va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sharp XL-MP150E, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sharp XL-MP150E.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sharp XL-MP150E. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sharp XL-MP150E ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
