Manuel d'utilisation / d'entretien du produit XG-C335X du fabricant Sharp
Aller à la page of 45
MODEL XG-C430X XG-C335X XG-C330X LCD PR OJECT OR SETUP MANU AL Setting up the Screen .......................................... 2 Screen Size and Projection Distance ................ 3 Throw Distance ...................................................
-2 Example of standard setup H Screen L: Projection distance Lens center Base line: Horizontal line passing through the lens center Side View For optimal image quality , position the projector perpendicular to the screen with the pr ojector’ s feet flat and level.
-3 Screen Size and Projection Distance The projection screen size v aries according to the distance fr om the lens of the projector to the screen. The optional lenses fr om Sharp are also availab le for specialized application. Please see your nearest Sharp A uthorized Pr ojector Dealer to details on all the lenses.
-4 Standard Zoom Lens F1.7-F1.9, f=28.0-33.6 mm NORMAL Mode (4:3) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.03571 χ L2 (m) = 0.04286 χ H (cm) = –0.1524 χ [Feet/inches] L1 (ft) = 0.03571 χ / 0.3048 L2 (ft) = 0.04286 χ / 0.
-5 Wide-zoom Lens (AN-C12MZ) F2.2-F2.7, f=24.5-30.7 mm NORMAL Mode (4:3) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.03019 χ L2 (m) = 0.03783 χ H (cm) = –0.1524 χ [Feet/inches] L1 (ft) = 0.03019 χ / 0.3048 L2 (ft) = 0.
-6 Tele-zoom Lens (AN-C18MZ) F1.7-F2.2, f=36.5-46.3 mm NORMAL Mode (4:3) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.04529 χ L2 (m) = 0.05745 χ H1 (cm) = –0.1524 χ [Feet/inches] L1 (ft) = 0.04529 χ / 0.3048 L2 (ft) = 0.
-7 Tele-zoom Lens (AN-C27MZ) F2.0-F2.8, f=53.8-82.9 mm NORMAL Mode (4:3) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.0671 χ L2 (m) = 0.10348 χ H (cm) = –0.1524 χ [Feet/inches] L1 (ft) = 0.0671 χ / 0.3048 L2 (ft) = 0.
-8 Tele-zoom Lens (AN-C41MZ) F2.1-F2.8, f=83.5-117.2 mm NORMAL Mode (4:3) The f or mula for picture siz e and projection distance [m/cm] L1 (m) = 0.10484 χ L2 (m) = 0.14725 χ H (cm) = – 0.1524 χ [Feet/inches] L1 (ft) = 0.10484 χ / 0.3048 L2 (ft) = 0.
-9 Changing the Lens Info • Bef ore changing the lens, turn off the power of the projector and remo ve the pow er cord from the wall outlet. • Do not attempt to change the lens while the projector is mounted on the ceiling.
-10 5 Insert the lens into the projector . • As you insert the lens, look inside the window to mak e sure that the pin is in- ser ted into the hole of the lens mount. 6 Slide the lens fastener catch tab in the direction of “LOCK” until it stops.
-11 RS-232C T erminal: 9-pin mini DIN female connector Pin No. Signal Name I/O Reference 1 Not connected 2R D Receive Data Input Connected to inter nal circuit 3S D Send Data Output Connected to inter.
-12 Connecting Pin Assignments 17 24 1 9 16 8 Pin No. Signal 1T .M.D .S. Data 2– 2T .M.D .S. Data 2+ 3T .M.D .S. Data 2 Shield 4 Not connected 5 Not connected 6 DDC Clock 7 DDC Data 8 Not connected 9T .M.D .S. Data 1– 10 T .M.D .S. Data 1+ 11 T .M.
-13 Computer contr ol A computer can be used to control the pr ojector b y connecting an RS-232C serial control cable (cr oss type, commerciall y av ailable) to the projector . (See page 27 of the projector’ s operation manual for connection.) Communication conditions Set the serial port settings of the computer to match that of the table.
-14 RS-232C Specifications and Commands Commands Example: When turning on the pr ojector , make the f ollowing setting. → ← PO W R _ 1 __ OK Projector Computer CONTROL CONTENTS Power ON Standby mo.
-15 RS-232C Specifications and Commands CONTROL CONTENTS Power ON Standby mode (or 40-second startup time) COMMAND PARAMETER RETURN S-Video Resize : Normal S-Video Resize : Stretch S-Video Resize : Bo.
-16 RS-232C Specifications and Commands CONTROL CONTENTS Power ON Standby mode (or 40-second startup time) COMMAND PARAMETER RETURN DVI Progressive : 2D DVI Progressive : 3D DVI Signal T ype : D. PC RGB DVI Signal T ype : D. PC Comp. DVI Signal T ype : D.
-17 RS-232C Specifications and Commands PJLink TM Compliant: This product conf or ms with the PJLink standard Class 1 and all Class 1 commands are implemented. This product confirms with the PJLink standard specification version 1.00. F or additional inf or mation, visit “http://pjlink.
-18 Pag e 1 9 1. Connecting the pr ojector to a computer Setting up the Pr ojector Netw ork En vir onment This section describes the basic procedure f or using the projector via the netw ork. If the network is alread y constructed, the projector’ s network settings may need to be c hanged.
-19 Setting up the Projector Netw ork En vironment 1. Connecting the Pro- jector to a Computer Establishing a one-to-one connection fr om the projector to a computer . Using a LAN cable (Category 5, cross-o ver type) you can config- ure the projector via the computer .
-20 Setting up the Pr ojector Network En vironment 2. Setting an IP Address for the Computer The follo wing describes how to make settings in Windows ® XP (Professional or Home Edi- tion). 1 Log on the network using the administrator’ s account for the computer .
-21 Setting up the Projector Netw ork En vironment 1 2 After confirming or setting, proceed to “3. Setting up Netw ork Connection f or the Pro- jector” . 5 Click “Internet Protocol (TCP/IP)”, and clic k the “Pr operties” button. 6 Confirm or change an IP address f or the setup computer .
-22 Setting up the Pr ojector Network En vironment 3. Setting up a Network Connection for the Projector Settings for suc h items as the projector’ s IP address and subnet mask are compatible with the existing netw ork. Set each item on the pr ojector as follows.
-23 4 The TCP/IP setting screen ap- pears, ready for netw ork settings f or the projector . Note • Confirm the existing network’ s segment (IP address group) to a void setting an IP ad- dress that duplicates the IP addresses of other network equipment or computers.
-24 Contr olling the Pr ojector via LAN Controlling the Projector Using Internet Explorer (Version 5.0 o r later) Complete connections to external equipment before starting the operation. (See pages 21- 29 of the projector’ s operation manual.) Complete the A C cord connection.
-25 Confirming the Projector Status (Status) On this screen, y ou can confirm the projector status. Y ou can confirm the follo wing items : • • • • • MA C Address • • • • • Po wer .
-26 Contr olling the Projector via LAN Setting and Adjusting the Projector (Settings & Adjustments ) Example: “Picture” screen display f or INPUT 1 On these screens, you can make pr ojector settings or adjust ments.
-27 Contr olling the Projector via LAN Making General Settings for the Network (Network - General) On this screen, y ou can make general settings relating to the netw ork. After clic king the “Apply” b utton, the set val- ues appear . Confirm that the v alues are set properl y , and then clic k the “Confirm” button.
-28 Contr olling the Projector via LAN Set ting Error Items and Destination Addresses to which E - m ail is to be Sent when an Error Occurs (Mail – Recipient Settings) On this screen, you can input e-mail destina- tions to which err or notification (error items) e-mails are sent.
-29 Setting up the Pr ojector Using RS-232C or T elnet When Connecting Using RS-232C 1 Launch general purpose terminal emulator . 2 Input settings for the RS-232C port of the terminal em ulator as follows. Baud Rate : 9600 bps* Data Length : 8 bit Pa r ity Bit : None Stop Bit : 1 bit Flow Control : None * This is the f actor y def ault setting.
-30 Setting up the Pr ojector Using RS-232C or T elnet When Connecting Using Telnet 1 Click “Star t” fr om the Windows ® desk- top and select “Run”. 2 Enter “telnet 192.168.150.2” in the text bo x that opens up. (If the IP address of the projector is 192.
-31 Setting up the Pr ojector Using RS-232C or T elnet SETUP MENU (Main Menu) [1] IP Address IP address settings. (P age 34 ) [2] Subnet Mask Subnet mask settings. (P age 34 ) [3] Default Gateway Def ault gatew ay settings . (P age 34 ) [4] User Name (Factory default setting : Not Re- quired) Setting of user name f or security protection.
-32 View Setting Detail List ([V]View All Setting) 1 1 1 1 1 Enter “v” and press the “Enter” key . Display all setting values(*). Enter number or symbol of item to be selected on the SETUP MENU . When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end.
-33 Save Settings and Quit ([S]Save & Quit) Save set values and quit menu. 1 1 1 1 1 Enter “s” and press the “Enter” key . 2 2 2 2 2 Enter “y” and press the “Enter” key .
-34 IP Address Setting ([1]IP Address) Setting of IP address. 1 1 1 1 1 Enter “1” and press the “Enter” key . 2 2 2 2 2 Enter numerical value to be set and press the “Enter” key . Display IP address after change (*). Subnet Mask Setting ([2]Subnet Mask) Setting subnet mask.
-35 Password Setting ([5]Password) Carrying out security protection using password. 1 1 1 1 1 Enter “5” and press the “Enter” key . 2 2 2 2 2 Enter passw ord and press the “Enter” ke y . Displa y set passw ord (*). Note • Password can be up to 8 characters.
-36 Disconnecting All Connec- tions ([D]Disconnect All) It is possible to disconnect all the TCP/IP connec- tions currently recognized b y the projector . Even if the COM Redirect port is fixed in the Busy status due to a problem, it is possible to force the Ready status back by carrying out this disconnection.
-37 Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) It is possible to confirm that a network connection between the projector and a computer etc. is work- ing normally . 1 1 1 1 1 Enter “5” and press the “Enter” key . 2 2 2 2 2 Enter IP address of device to be tested and press the “Enter” key .
-38 Setting of Search Port (ADVANCED[0]Search Port) Sets the por t number used when searching f or the projector from the network. 1 1 1 1 1 Enter “0” and press the “Enter” key . 2 2 2 2 2 Enter numerical v alue and press the “Enter” key .
-39 1 Click “Star t” – “All Pr ograms” – “Accessories” – “Communica- tions” – “HyperT erminal”. • If you do not ha ve HyperT er minal in- stalled, see the operation manual of y our computer . • Depending on the settings of your com- puter , y ou may be required to enter y our area code and other details.
-40 Resetting the Lamp Timer of the Pr ojector via LAN 5 Click “Properties” on the “File” menu. 6 Click the “Settings” tab, and then c lick “ASCII Setup”.
-41 Comm unication cannot be established with the pr ojector When connecting the pr ojector using serial-connection Check that the RS-232C terminal of the projector and a computer or the commercially av ailable controller are connected correctly . Check that the RS-232C cab le is a cross-ov er cable .
-42 Tr oubleshooting Ta ke the following steps f or chec king the network settings for the computer . 1. Open a command prompt (MS-DOS Prompt). • In the case of Windows ® 98 or 98SE: click “ST ART” ➔ “Progr ams” ➔ “MS-DOS Prompt” in order .
-43 Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also , check if an IP address is set. 1. Open a command prompt (MS-DOS Prompt). • In the case of Windows ® 98 or 98SE: click “ST ART” ➔ “Programs” ➔ “MS-DOS Prompt” in order .
-44 Dimensions Units: inches (mm) Side View Side View Top View Rear View Front View Bottom View 11 1 / 64 (279.5) 17 / 64 (6.5) 1 / 4 (6) 12 27 / 32 (326) 3 31 / 64 (88.5) 2 15 / 16 (74.5) 5 53 / 64 (148) 5 53 / 64 (148) 4 (101.5) 1 31 / 32 (50) 3 1 / 64 (76.
-45 Dimensions Pr ojector and Lens Dimensions [When AN-C12MZ is installed] Unit : inches (mm) 15 21 / 64 - 15 13 / 32 (389 - 391) 107 [When AN-C18MZ is installed] Unit : inches (mm) 12 3 / 32 - 12 11 / 64 (307 - 309) 67.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sharp XG-C335X c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sharp XG-C335X - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sharp XG-C335X, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sharp XG-C335X va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sharp XG-C335X, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sharp XG-C335X.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sharp XG-C335X. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sharp XG-C335X ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
