Manuel d'utilisation / d'entretien du produit MD-C2H du fabricant Sharp
Aller à la page of 56
OPERATION MANUAL MODEL MD-C2H HK <P=001> MD MINI SYSTEM MD-C2H(SUK) TINSE0238AWZZ Thank you for purchasing this SHARP product. To obtain the best performance from this product, please re ad t his ma nu al caref ull y. I t wi ll gu ide y ou in op era tin g your SHARP product.
SPEC I AL NOT ES ● Recording and playback of any mater ial may requi re consent, which SHARP is unable to give. Please refer particularly to the provisions of the Copyright Act 1956, the Dramatic and Mus ical Perfo rmers P rotection Act 1958, the Performers Protection Acts 1963 and 1972 and to any subsequent statutory enactments and orders.
HK <P=001> PRECAUTIONS ■ General ● Please make sure that the unit is positioned in a well ven- tilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 20 cm (8") of free space on the top of the unit.
<P=002> NAMES OF CONTROLS AND INDICA TO RS 2 14 5 3 12 13 14 15 16 17 6 7 8 9 10 18 19 11 20 21 26 35 22 36 23 24 27 28 25 29 32 33 34 37 38 39 40 31 30 41 42 ■ Front panel 1 1. (CD) Disc Skip Button 1 2. (CD) Select/Direct Play Buttons 1 3. (CD) Open/Close Button 1 4.
<P=003> (Continued) ■ Display window 1 1. (MD/CD) Random Play Indicator 1 2. Timer Play Indicator 1 3. Timer Record Indicator 1 4. (MD/CD) Repeat Indicator 1 5. (MD/CD) Play Indicator 1 6. Memory Indicator 1 7. (TAPE) Record Indicator 1 8. (MD) Record Indicator 1 9.
<P=004> (Continued) ■ Remote control 1 1. Remote Control Transmitter LED 1 2. Programme Type/Traffic Information Search Button 1 3. Station Selector Button 1 4. (TUNER) Preset Up/Down Buttons 1 5. (MD/CD) Clear Button 1 6. MD Time Button 1 7. (TAPE) Record Stand-by Button 1 8.
HK <P=001> PREP ARA TION FOR USE 1 2 3 1 2 3 ● Unplug the AC power lead from the AC socket before con- necting or disconnecting any component. ■ Aerial connection Supplied FM aerial Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
<P=002> (Continued) ■ Removing the speaker grilles 1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure not hing com es i nto c ontact wit h t he speaker diaphragms.
<P=003> (Continued) ■ Remote control ● When inserting or removing the batteries, push them towards the battery terminal. ● Installing the batteries incorrectly may cause the unit to mal- function. Precautions for battery use: ● Insert the batteries according to the direction indicated in the battery compartment.
<P=004> SETTING THE CLO CK 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK button. 3 Within 5 seconds, press the ENTER button. 4 Turn the jog dial to select the time display mode. " 0 : 0 0 " → The 24 -ho ur d isp la y wil l ap pe ar.
HK FLAT VOCAL SOFT-1 SOFT-2 HEAVY-1 HEAVY-2 <P=001> SOUND CONTROL ■ Volume (Main unit operation) When the VOLUME control is turned clockwise, the volume will increase.
<P=002> COMP ACT DISC OPERA TION ■ Loading and playing CDs 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray.
<P=003> (Continued) ■ When choosing a CD for playback Press one of the CD PLAY 1 - 3 buttons to select the CD you want to listen to. ● Only the selected disc will be played back. When selecting disc 1 When selecting disc 2 When selecting disc 3 Notes: ● If the disc tray is open, it will be automatically closed.
<P=004> MINIDISC OPERA TION ■ Loading and playing MiniDiscs 1 Press the ON/STAND-BY button to turn the power on. 2 Press the MD button. 3 Load the MiniDisc(s) in the direction indicated by the arrow on the MiniDisc, with the labeled side facing up.
HK <P=001> (Continued) 3 1 5 2 1 2 4 5 ■ When choosing a MD for playback Press one of the MD PLAY 1 - 3 buttons to select the MD you want to listen to.
<P=002> RADIO OPERA TION ■ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- quency band. (FM ST, FM or AM) 4 Press the TUNING ( or ) button to tune into the desired station.
<P=003> (Continued) ENTER MEMORY TUNER (BAND) ■ Preset tuning You can store up to 40 stations in memory (40 stations consisting of any combination of AM and FM stations you like) and recall them. To enter stations into memory: 1 Perform steps 1 - 6 in the "Tuning" section.
<P=004> RDS (Radio Data System ) OPERA TION RDS is a broadcasting service which a growing number of FM stations are now providing. It allows these FM stations to send additional signals along with their regular programme signals.
<P=005> (Continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) With the MD-C2H, you can search for and receive the following PTY, TP and TA signals. NEWS: Short accoun ts o f fac ts, events and publ icl y ex pre ssed view s, r ep orta ge and actuality.
HK <P=001> (Continued) ■ ASPM (Auto Station Program Memory) It is recomm end ed that you store stations i n memory using ASPM. (This memory can be used for PTY searches, station select and EON switching.
<P=002> (Continued) ■ To specify station names and select stations manually (station select) You can received for a desired station by specifying the station name (BBC R1, BBC R2, etc.) from among the stations that have been stored in memory. (ASPM is convenient for storing stations in memory.
<P=003> (Continued) Notes: ● When there are no station names stored in memory, you cannot use this function. In this case, when the STATION button is pressed, "NOTHING" will flash for 5 seconds, and the unit will return to the original dis- play.
<P=004> (Continued) ■ To recall stations tha t have b een stored in memory (PTY search) You can search a desired stations by specifying the programme type (news, sports, traffic programme, etc. ... see page 18) from among the stations that have been stored in memory.
<P=005> (Continued) ■ To manually recall the stations stored in mem- ory Each time you turn the jog dial one step the channel number will change. ● After the channel number has been displayed for 2 seconds, the frequency for that channel will appear for 2 seconds, and then the station name will appear.
<P=006> (Continued) ■ EON-PTY 1 Tune in the desired RDS station (when a station name is being displayed). 2 Press the EON button when "EON" appears. ● "PTY TI" and "SELECT" will appear alternately for about 6 seconds.
HK <P=001> (Continued) ■ EON-TI 1 Tune in the desired RDS station (when a station name is being displayed). 2 Press the EON button when "EON" appears. ● "PTY TI" and "SELECT" will appear alternately for about 6 seconds.
<P=002> (Continued) In the following cases, the EON stand-by mode will be cancelled. ● Press the ON/STAND-BY button to enter the stand-by mode.
<P=003> CONVENIENT CD AND MD OPERA TIONS ■ APSS (Auto Program Search System) APSS automatically locates the beginning of any track. To listen again to the track being played: (Main unit operation) Turn the jog dial anti-clockwise or press the button for less than 0.
<P=004> (Continued) ■ Repeat and random play 1 Select the desired programme source, MD or CD, by pressing the MD or CD button. 2 Press the PLAY MODE button.
<P=005> (Continued) ■ APMS (Automatic Programmable Music Selector) 1 Select the desired programme source, MD or CD, by pressing the MD or CD button. 2 Press the MEMORY button. ● "MEMORY" will flash. 3 Press one of the MD PLAY 1 - 3 buttons or CD PLAY 1 - 3 buttons to select the desired disc number.
HK <P=001> (Continued) ■ Switching the MD time display Each time the MD TIME button is pressed during playback or when in the pause mode, the display will change as described below. ● The information displayed will relate to the MD whose red frame is flashing.
<P=002> RECORDING ■ Differences from tape recordings You ca nnot r ecord music on t he reverse side of a MiniDisc. MiniDiscs are single sided and should only be inserted with the correct side up. You don’t need to search for the starting point at which to record.
<P=003> (Continued) ■ Recording from CDs onto MiniDiscs (One-Touch Editing) You can record from up to three CDs onto three MiniDiscs with a one-touch operation. When multiple CDs are recorded onto MiniDiscs, the contents of a particular CD can be recorded onto the MiniDisc which has the same disc number as the CD.
<P=004> (Continued) ■ APMS recording from CDs onto MiniDiscs You can select your favourite tracks from CDs and record them onto three consecutive MiniDiscs. 1 Select tracks for APMS playback. (Page 29) 2 Load recordable MiniDiscs. 3 Press the CD MD EDIT button.
HK <P=001> (Continued) 1 - CD PLAY 3 CD TAPE CD TAPE 5 1 1 2 6 4 6 4 ■ Recording from CDs or a cassette onto MiniDiscs (Synchronised Recording System) When a CD or a tape is played, the MD recording will start sim- ultaneously. 1 Load CDs or a tape for playback.
<P=002> (Continued) TAPE REC TAPE REC 1 - CD PLAY 3 1 - MD PLAY 3 1 - MD/CD PLAY 3 CD MD MD CD 2 ■ Recording from the built-in radio to a cassette tape 3 4 2 3 4 1 Tune in to the desired station. (Pages 15 - 16.) 2 Load a blank cassette into the cassette compartment.
<P=003> EDI TIN G ■ Using the editing function We will show you some examples of how to use the editing functions. You can create a disc of your favorite selections by recording tracks from a variety of input sources such as CDs and radio broadcasts.
12 3 12 34 AB C D AB C D 12 3 12 3 4 CD AB CD AB AB C AB D E D 12 34 12 3 4 E 5 CAB D 12 34 12 34 AB CD "# !$ % & ' () + , - ./ < = > ?@ _ ` HK <P=001> (Continued) We will explain the 5 editing functions with which you can create your own original discs from rec orded MiniDiscs.
<P=002> (Continued) ■ Divide ENTER NAME/ TOC EDIT Before making editing changes, check the disc number. 1 Play the track which you want to divide into two, and press the button at the point where you want to divide the track. ● The unit will enter the pause mode.
<P=003> (Continued) ■ Move Before making editing changes, check the disc number. 1 Whilst in the stop mode, select the track you want to move using the jog dial. Or start playing the track to be moved, and then press the button to enter the pause mode.
<P=004> (Continued) ■ Erase Before making editing changes, check the disc number. ENTER NAME/ TOC EDIT To erase tracks one at a time: 1 Whilst in the stop mode, select the track you want to erase using the jog dial. Or start playing the track to be erased, and then press the button to enter the pause mode.
HK <P=001> (Continued) ■ To create a disc name Before making editing changes, check the disc number. A name for the whole disc. A Disc name is displayed when an MD is inserted. 1 Press the ■ button. ● The total number of tracks and the total playing time on an MD will appear.
<P=002> (Continued) ■ To create a track name Before making editing changes, check the disc number. Name each track. A track’s name will be displayed whenever you select it and dur- ing playback. 1 During playback, press the NAME/TOC EDIT button.
<P=003> (Continued) ■ To change disc names and track names Before making editing changes, check the disc number. 1 To change disc names, perform steps 1 - 3 on page 41.
<P=004> HOW TO USE THE BUIL T-I N TIMER ● Before setting the timer, make sure that the clock setting is correct. (Page 9) ENTER TIMER ON/ STAND-BY 2 3 4 5 7 6 ■ Timer playback Before timer playback, the following preparations are required. ● Load a CD, MD or tape.
<P=005> (Continued) ● Before setting the timer, make sure that the clock setting is correct. (Page 9) ENTER ON STAND-BY MD REC TAPE REC TIMER 2 3 4 5 7 6 ■ Timer recording Before timer recording, the following preparations are required. ● Load a recordable MD or tape.
HK <P=001> (Continued) ENTER SLEEP 2 3 Caution: In the following cases, the timer recording function will not work. When recording on a MiniDisc: ● When a MiniDisc has not been inserted. ● When a playback-only MiniDisc is inserted. ● When the MiniDisc you inserted is protected against accidental erasure.
<P=002> USING EXTERNAL UNITS ■ Connecting external units Before connecting external units, set this unit to the stand-by mode and turn off the power to the external units. Connecting to stereos or MD/CD players (equipment which can output analogue signals) The other MD/CD player Commercially available lead with 3.
<P=003> (Continued) ■ Listening to sound from an external unit 1 Press the AUX button. 2 Start playback on the external unit and press the ( ) o r ( ) bu tto n to adju st t he inp ut level . ● Adjust this level when "OVER" appears or when the sound volume is too low.
HK <P=001> WHA T I S A MINIDISC? The disc is stored in a cartridge. You can handle it easily without worrying about dust, fingerprints, etc. However, dust entering the opening of the cartridge, dirt on the cartridge, warping, etc. may cause malfunctions.
<P=002> MI NIDI SC SY ST EM LIMI T A T I ONS Even if the maximum recording time of a MiniDisc has not been reached, "TOC FULL ∗ " may be displayed. ( ∗ :Number or Symbol) Even if the maximum recording time of a MiniDisc has not been reached, "DISC FULL" may be displayed.
<P=003> (Continued) CD playback SYMPTOM POSSIBLE CAUSE REMEDY ● Even though a disc has been loaded, "CD NO DISC" is displayed. ● Playback stops in the middle of a track, or playback is not performed properly. ● Playback sounds are skipped.
2 HK <P=001> (Continued) When an error message is displayed, proceed as follows: Error messages Meaning Remedy BLANK MD ● Nothing is recorded. ● Replace it with another disc. Can’t EDIT ● A track cannot be edited. ● Change the stop position of the track and then try editing it.
<P=002> (Continued) U TOC ∗ ERR ( ∗ :Num be r or Symbol) ● TOC information recorded on the MD does not match the MD specifications or it cannot be read.
<P=003> SPEC I FICA T I ONS As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
MD-C2H(SUK) TINSE0238AWZZ SHARP ELECTRONICS (U.K.) L TD. Sharp House, Thorp Road, Newton Heath, Manchester , M40 5BE SHARP CORPORA TION ?????.?? TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair , or at its option the replacement, of this product subject to the conditions listed below:- 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sharp MD-C2H c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sharp MD-C2H - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sharp MD-C2H, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sharp MD-C2H va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sharp MD-C2H, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sharp MD-C2H.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sharp MD-C2H. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sharp MD-C2H ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
