Manuel d'utilisation / d'entretien du produit CY84 du fabricant Servis-Rhino
Aller à la page of 146
© 2008 Alamo Group Inc. CY84 Published 03/08 Part NO. 00771528C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com ROT AR Y MOWER This Operator' s Manual is an integral p art of the safe opera tion of this machine and must be maintaine d with the un it at all times.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazar dous . There is no substitute for a cautious, safe-minded operator who recognizes the poten tial hazards and follows rea sonable safety practices.
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Gr oup Ag Division, in cooperation with other industry manufacturers has develo ped the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book.
Alamo Gr oup Ag. Division is willing to pr ovide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator S.
T ABLE OF CONTENTS SAFETY SECTION ......... ................................. .......................................................... ........... 1- 1 Safety Messages ............. ............. ............. ................ ............. ........
Tractor Pre-Operation Inspection/Service ........ ................ ................. ................ ................... ........... ............... ... 4-18 Mower Pre-Operation Inspection/Service .. ............. ... ................ ............. .
Safety Section 1-1 © 2008 Alamo Group Inc. SAFETY SECTION.
SAFETY CY84 03/08 Safety Section 1-2 © 2008 Alamo Group Inc. SAFETY Safety Messages A careful operator is the best opera tor . Safe ty is of primary import ance to the manu facturer and should be to the owner/operator . Most accidents ca n be avoided by being aware of your eq uipment, your surroundings, and observing c ertain precautions .
SAFETY CY84 03/0 8 Safety Se ction 1-3 © 2008 Alamo Group In c. SAFETY N ever opera t e th e T rac t or or I mp l emen t un til you h ave rea d an d completely underst and this Man ual, the T ractor Operator’s Manu al, and each of the Safety Messages found in the Manual or on the T ractor and Implement.
SAFETY CY84 03/08 Safety Section 1-4 © 2008 Alamo Group Inc. SAFETY Never allow children to operate, ride on, or co me close to the T ractor or Implement.
SAFETY CY84 03/0 8 Safety Se ction 1-5 © 2008 Alamo Group In c. SAFETY Periodically inspect all moving part s for wear and replace when necessary with au thorized servic e part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings.
SAFETY CY84 03/08 Safety Section 1-6 © 2008 Alamo Group Inc. SAFETY Al ways rea d care f u ll y an d comp l y f u ll y w ith th e manu f ac t urer ’ s instructions when handling oil, solvents, cleansers, a nd any other chemical agent. (SG-22) Never run the T racto r engine in a closed build ing or without adequate ven tilation.
SAFETY CY84 03/0 8 Safety Se ction 1-7 © 2008 Alamo Group In c. SAFETY There are obvio us and hidden potential h azards in the operation of th is Mower . REMEMBER! This machine is often operated in heavy brush and in heavy weeds. The Blades of this Mower can throw object s if shields are not properly installe d and maintaine d.
SAFETY CY84 03/08 Safety Section 1-8 © 2008 Alamo Group Inc. SAFETY Avoid mo wing in reverse direction when poss ible. Check to make sure there ar e no persons behind the mower and use extreme car e when mowing in reverse. Mow only at a slow ground speed whe re you can safely op erate and control the tractor and mower .
SAFETY CY84 03/0 8 Safety Se ction 1-9 © 2008 Alamo Group In c. SAFETY Rotary Mowers are capa ble under adverse conditions of throwing objects for great dist ances (300 feet or more) an d causing serious injury or death. Follow safety messages carefully .
SAFETY CY84 03/08 Safety Section 1-10 © 2008 Alamo Group Inc. SAFETY Relieve hydraulic pressure prior to doing any maintenance or repa ir work on the Implement. Place the Imp lement on the ground or se curely blocked up, disengage th e PTO, and turn of f the tractor engine.
SAFETY CY84 03/0 8 S afety Sectio n 1-11 © 2008 Alamo Group In c. SAFETY Replace bent or b roken blades with new blades. NEVER A TTEMPT TO STRAIGHTEN, WELD, OR WELD HARDF ACING ON BLAD ES SINCE THIS WILL LIKEL Y CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT F AILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.
SAFETY CY84 03/08 Safety Section 1-12 © 2008 Alamo Group Inc. SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote sa fe operation.
SAFETY CY84 03/0 8 S afety Sectio n 1-13 © 2008 Alamo Group In c. SAFETY ITEM P ART NO. QTY TYPE DESCRIPTION 1. 007491 17 1 DANGER Multi-Hazard 2. 00756004 1 DANGER D/L Shield Missing -D o Not Operate 3. 00756005 1 DANGER Rotating Driveline 4. 00756007 1 W ARNING Use/Re pair Shields & Guards 5.
SAFETY CY84 03/08 Safety Section 1-14 © 2008 Alamo Group Inc. SAFETY Lif t-T ype Unit.
SAFETY CY84 03/0 8 S afety Sectio n 1-15 © 2008 Alamo Group In c. SAFETY ITEM P ART NO. QTY TYPE DESCRIPTION 1. 00725746 1 PELIGRO Get Manual T ranslated 2. 007491 17 1 DANGER Multi-Hazard 3. 00756005 1 DANGER Rotating Driveline 4. 00756004 1 DANGER D/L Shield Missing -D o Not Operate 5.
SAFETY CY84 03/08 Safety Section 1-16 © 2008 Alamo Group Inc. SAFETY Decal Description DANGER! Multi-Hazard Decal (Refer T o Front Cover) P/N 007491 17 DANGER! Guard Missing, Do Not Oper ate. If you see this decal, Do No t Operate the mower until the shield has been replaced.
SAFETY CY84 03/0 8 S afety Sectio n 1-17 © 2008 Alamo Group In c. SAFETY W ARNING! Ne ver use your hand to check for oil leaks. Always use paper or cardb oard. P/N 00756059 DANGER! Keep Away - Rot ating Blades P/N 00756485 DANGER! Make certain that drivelines are correct length and are se curely attach ed.
SAFETY CY84 03/08 Safety Section 1-18 © 2008 Alamo Group Inc. SAFETY Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transpo rt or operate without the SM V . Provided by T ractor Manufacture r . Repla ce if missing on tractor .
SAFETY CY84 03/0 8 S afety Sectio n 1-19 © 2008 Alamo Group In c. SAFETY Operator's Manu al (with repair p arts) and warra nty was attached to this implement during final inspection.
SAFETY CY84 03/08 Safety Section 1-20 © 2008 Alamo Group Inc. SAFETY CY84 Logo P/N 00771526 INFORMA TION - 5 Y ear Gearbox W arranty P/N 00771283 Amber Reflector . Keep reflectors clean and visible. P/N 1458393 Peligro T ranslation, If yo u do not know how to read English, please find someone who knows how to read English.
SAFETY CY84 03/0 8 S afety Sectio n 1-21 © 2008 Alamo Group In c. SAFETY PELIGRO! S p anish T ranslati on for Driveline Safety P/N 00773723 W ARNING! Maintain shields and deflectors in good condition. Failure to do so may lead to injury or even death.
SAFETY CY84 03/08 Safety Section 1-22 © 2008 Alamo Group Inc. SAFETY Read Operato r ’s Manual! The operator ’s ma nual is located inside this canister .
SAFETY CY84 03/0 8 S afety Sectio n 1-23 © 2008 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in br oad terms the co ncept and effect of federal la ws and regulations concerning employe r and employee equipme nt operat ors.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Introduction Section 2-1 © 2008 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION CY84 03/08 Introduction Section 2-2 © 2008 Alamo Group Inc. INTRODUCTION This Rotary Mower is designed with ca re and built with quality materials by skilled workers. Proper as sembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine.
INTRODUCTION CY84 03/08 Introduction Section 2-3 © 2008 Alamo Group Inc. INTRODUCTION Pull-T ype Model These mowers are available in lif t-type and pull-ty pe. Th ese rugged Mowers are designed for medi um-duty work. They can mow pastures, cut brush up to 4" in diameter , and control grass and weeds on highways or industrial sites.
INTRODUCTION CY84 03/08 Introduction Section 2-4 © 2008 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely underst and the Safety Messages and in structions, and know how to operate correctly both the tractor and implement.
Assembly Section 3-1 © 2008 Alamo Group Inc. ASSEMBL Y SECTION.
ASSEMBLY CY84 03/08 Assembly Section 3-2 © 2008 Alamo Group Inc. ASSEMBL Y Optional A-Frame Assembly (Figure Asm-0032) T o assemble the Mower ’s A-Frame, follo w the procedures listed below: 1. Insert bushing (5 ) into lower end of each A- Frame half (1 & 2).
ASSEMBLY CY84 03/08 Assembly Section 3-3 © 2008 Alamo Group Inc. ASSEMBL Y Dual T ail Wheel Assembly Lif t-T ype (Figure Asm-0034) Attach the t ail wheel beam ( 1) to the lug toward the outer edge of th e deck just to the re ar of the cross reinforcem ent using bo lt (2) & nut (3).
ASSEMBLY CY84 03/08 Assembly Section 3-4 © 2008 Alamo Group Inc. ASSEMBL Y Axle Attach Rear Axle to the lugs on the rear of the mainframe us ing (5) 3/ 4 x 3-1/2 bo lts and locknuts (Figure Asm-0036).
ASSEMBLY CY84 03/08 Assembly Section 3-5 © 2008 Alamo Group Inc. ASSEMBL Y Hydraulic or Manual Lif t Attach the S pring Assembly (Figure As m-0038) to the lug on the mower deck behind the Center Gearbox.
ASSEMBLY CY84 03/08 Assembly Section 3-6 © 2008 Alamo Group Inc. ASSEMBL Y Shields, Guards, and Deflectors Shields, Guards, and Deflector s are provided for th e protection of the operator and byst anders. The Manufacturer stro ngly recommends the use of Protective Shield ing at all times.
ASSEMBLY CY84 03/08 Assembly Section 3-7 © 2008 Alamo Group Inc. ASSEMBL Y Chain Guard (Extra Equipment) Front Chain Gua rds (Figure Asm-00 42) Attach the Right Cha in Guard Mo unting Plate ( 1) & the Left Chain Guard Mou nting Plate (2) to the mower with 1/ 2” x 1-1/2” Bo lts (3), Flatwashers (4) and Locknut s (5).
ASSEMBLY CY84 03/08 Assembly Section 3-8 © 2008 Alamo Group Inc. ASSEMBL Y Driveline Att achment (Figure Asm-0044) Remove washer , ca stle nut, and cotter pin from wing gearbox shaf t. Install clutch yoke on shaft. Attach yoke to clutch by inserting spacer flat (1) between yoke and clutch.
ASSEMBLY CY84 03/08 Assembly Section 3-9 © 2008 Alamo Group Inc. ASSEMBL Y Check Chains (Extra Equi pment) for Lif t-Models (Figure Asm-0046) Check Chains are available for att achment to front of Mower a s an access ory .
ASSEMBLY CY84 03/0 8 Assembly Sectio n 3-10 © 2008 Alamo Group Inc. ASSEMBL Y Jackshaf t Bearing Support Assembly (Figure Asm-0047) Attach the Jackshaft bearing support bra ckets (1&2) to the tongue. Loose ly attach be aring support brackets by using 1/2” x 7-1/ 2” bolt (3), washer (5) , bushing (4) and nut s (6).
Operation Sec tion 4-1 © 2008 Alamo Group In c. OPERA TION SECTION.
OPERATION CY84 03/08 Operation Section 4-2 © 2008 Alamo Group Inc. OPERA TION RHINO CY84 HEA V Y -DUTY ROT AR Y MOWER OPERA T ION INSTRUCTIONS Rhino Cyclone 84 (CY84) Heavy-Duty Rotary Mowers are manufactured with qua lity material by skilled workers.
OPERATION CY84 03/08 Operation Section 4-3 © 2008 Alamo Group In c. OPERA TION 1. S t andard Equipment and Specifications CY84 Horsepower Required (Min.): Lift 60 HP Pull 30 HP Safety Defle ctor Rubber Belti ng Cutting Width 84” Overall Wid th 90-3/8” Overall Length : Lift 125” Pull 152-1/2” Cutting Height 2-3/8” - 16-1/2” Min.
OPERATION CY84 03/08 Operation Section 4-4 © 2008 Alamo Group Inc. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION CY84 03/08 Operation Section 4-5 © 2008 Alamo Group In c. OPERA TION 3. TRACT OR REQUIREMENTS The tractor used to operate the mower must ha ve the power capacity to lif t, pull, and operate the Power T ake Off (PT O) at the mower ’s rated speed while traveling at a ground speed between 2 a nd 5 MPH.
OPERATION CY84 03/08 Operation Section 4-6 © 2008 Alamo Group Inc. OPERA TION 3.3 T r actor Horsepower The power require d to operate a mower is d etermined by the tractor PTO hor sepower . For most mo wing conditions, the CY84 mower r equires a tractor with at lea st 60 HP for a lif t unit and 30 HP for a pull-type.
OPERATION CY84 03/08 Operation Section 4-7 © 2008 Alamo Group In c. OPERA TION 3.5 Drawbar - Pull-T ype Mower For pull-type mowers (540 and 1000 RPM) equipped with an equa l-angle driveline, the trac.
OPERATION CY84 03/08 Operation Section 4-8 © 2008 Alamo Group Inc. OPERA TION DO NOT use a PTO adapter to att ach a non-matching Implement dr iveline to a T ractor PTO. Use of an a dapter can double the ope rating speed of the Implemen t resulting in excessive vibration, thrown objects, and bl ade and implement failure.
OPERATION CY84 03/08 Operation Section 4-9 © 2008 Alamo Group In c. OPERA TION Never allow children or other persons to ride on the Tr actor or Implement.
OPERATION CY84 03/08 Operation Section 4- 10 © 2008 Alamo Group Inc. OPERA TION Never stand or allo w another person to st and between a running T ractor and the Mower when attaching the Implement to the T ractor . Alway s shut the Tractor completely off before attempting to connect the Mowe r pins to the Tr actor hitch.
OPERATION CY84 03/08 Operation Section 4- 11 © 2008 Alamo Group In c. OPERA TION 6.1 Connecting the Mower - Lift-T ype 1. Make sure the trac tor is equipp ed with the correct PTO shaf t. Change shaf ts if needed. 2. Shorten or remove th e tractor drawbar to avoid interference when rais ing and lowering the mower .
OPERATION CY84 03/08 Operation Section 4- 12 © 2008 Alamo Group Inc. OPERA TION 6.2 Connecting the Mower - Pull-T ype 1. Make sure the tractor is equip ped with the correct PT O shaft and the dr awbar is extended 14” from the end of the PT O shaft to the hitch point.
OPERATION CY84 03/08 Operation Section 4- 13 © 2008 Alamo Group In c. OPERA TION Safety Chains When towing imp lements on a public roadway , use a safety chain wit h tensile stren gth equal to or greater th an the gross weight of the unit being towe d.
OPERATION CY84 03/08 Operation Section 4- 14 © 2008 Alamo Group Inc. OPERA TION 8. Extend the tractor’s top 3-point link so that when lifting the mower , the front of the deck will raise 2 to 2½" before the t ail wheel leaves the ground. This will allow the mower to follow the contour of uneven terrain .
OPERATION CY84 03/08 Operation Section 4- 15 © 2008 Alamo Group In c. OPERA TION Setting Deck Pitc h - Lift-T ype 1. Lower the mower until the rear of the mowe r is resting securely on its tail wheels. 2. Lower the 3-point lift arms further until the fro nt of the mower is at leas t 3/ 4” lower than the rear .
OPERATION CY84 03/08 Operation Section 4- 16 © 2008 Alamo Group Inc. OPERA TION 8.1 Driveline Length Check When fitting the mower to the tractor , the telescoping dr iveline must be inspected to ensu.
OPERATION CY84 03/08 Operation Section 4- 17 © 2008 Alamo Group In c. OPERA TION Engagement Check Proce dure • With the driveline att ached, position the mower to the point wh ere the telesc op ing driveline is at its maximum extension. T urn of f the tractor and securely block the mower at this position .
OPERATION CY84 03/08 Operation Section 4- 18 © 2008 Alamo Group Inc. OPERA TION 9.1 T racto r Pre-Operation Inspection/Service Refer to the tr actor operator ’s ma nual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions.
OPERATION CY84 03/08 Operation Section 4- 19 © 2008 Alamo Group In c. OPERA TION • Ensure deflectors and/or chainguards are in position and not d amaged.
OPERATION CY84 03/08 Operation Section 4- 20 © 2008 Alamo Group Inc. OPERA TION • Ensure the tractor PT O master shield and the mower slip clutch shield are in place, lowe red, and in good condition. • Ensure the driveline integr al shield is in good condition and rotates free ly .
OPERATION CY84 03/08 Operation Section 4- 21 © 2008 Alamo Group In c. OPERA TION 9.3 C utting C omponent Inspection Inspect blade p an and blade assembly for the following: OPS-U-0031 Inspect the Blades daily for abnormal wear .
OPERATION CY84 03/08 Operation Section 4- 22 © 2008 Alamo Group Inc. OPERA TION 9.4 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
OPERATION CY84 03/08 Operation Section 4- 23 © 2008 Alamo Group In c. OPERA TION T r actor PRE-OPERA T ION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift .
OPERATION CY84 03/08 Operation Section 4- 24 © 2008 Alamo Group Inc. OPERA TION Rotary Mower PRE-OPERA T ION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shif.
OPERATION CY84 03/08 Operation Section 4- 25 © 2008 Alamo Group In c. OPERA TION 10. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requ ires the operator possess a thorough knowledge of th e model being operated and precautions to t ake while driving with an att ached implem ent.
OPERATION CY84 03/08 Operation Section 4- 26 © 2008 Alamo Group Inc. OPERA TION 10.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor .
OPERATION CY84 03/08 Operation Section 4- 27 © 2008 Alamo Group In c. OPERA TION 10.3 Raising the Mower Using the tractor 3-point hi tch control lever , raise the mower off the grou nd about 6” , or just high enough to cle ar any ground ob stacles.
OPERATION CY84 03/08 Operation Section 4- 28 © 2008 Alamo Group Inc. OPERA TION 10.5 Crossing Ditches and Steep Inclines When crossing ditches with steep banks o r going up sharp inclines, it is poss.
OPERATION CY84 03/08 Operation Section 4- 29 © 2008 Alamo Group In c. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. This type of path will reduce the possib ility of over-collapse of the driveline and re sulting damag e.
OPERATION CY84 03/08 Operation Section 4- 30 © 2008 Alamo Group Inc. OPERA TION M any var i e d o bj ec t s, suc h as w i re, ca bl e, rope, or c h a i ns, can b ecome en t ang l e d i n th e operating p arts of the m ower head. These items could th en swing outside the hou sing at greater velocities than the blad es.
OPERATION CY84 03/08 Operation Section 4- 31 © 2008 Alamo Group In c. OPERA TION Rotary Mowers are capa ble under adverse conditions of throwing objects for great dist ances (300 feet or more) an d causing serious injury or death. Follow safety messag es carefully .
OPERATION CY84 03/08 Operation Section 4- 32 © 2008 Alamo Group Inc. OPERA TION 1 1.4 PTO RPM and Ground S peed Ground speed for mowing will depend upon the height, type , and density of vege tation to be cut. Recommended speed for ef ficient mower performance is between 2 and 5 mph(3-8 kph).
OPERATION CY84 03/08 Operation Section 4- 33 © 2008 Alamo Group In c. OPERA TION Do not mow with two machines in the same ar ea except with Cab tractors with the windows closed. (SGM-1 1) Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting.
OPERATION CY84 03/08 Operation Section 4- 34 © 2008 Alamo Group Inc. OPERA TION When you get to the end of a p ass, slightly raise the mower (2-4 ”) before turning.
OPERATION CY84 03/08 Operation Section 4- 35 © 2008 Alamo Group In c. OPERA TION Then lower the mower to the desired height and mow the veget ation a second time. If possible , select a mowing p attern that is at a 90 degree angle to the first pass to reduce streaking for a more uniform cut.
OPERATION CY84 03/08 Operation Section 4- 36 © 2008 Alamo Group Inc. OPERA TION Never stand or allow another pe rson to s tand between a running Tractor and the M ower when disconnecting the Imp lement from the T ractor 3-point hitch. 11 . 6 S hutting Down the Implement T o shut down the implement, first bring the tractor to a complete stop.
OPERATION CY84 03/08 Operation Section 4- 37 © 2008 Alamo Group In c. OPERA TION Always shut the T ractor completely down, place the transm ission in park, and set the parking brake before you or anyone el se attemp ts to connect or disconnect the Implemen t and T ractor hitc hes.
OPERATION CY84 03/08 Operation Section 4- 38 © 2008 Alamo Group Inc. OPERA TION 13. MOWER STORAGE Properly prepa ring and storing the mowe r at the end of the season is critical to maintaining it s appearance and to help ensure year s of dependable service.
OPERATION CY84 03/08 Operation Section 4- 39 © 2008 Alamo Group In c. OPERA TION Before transporting th e tractor and mower , idle the tractor engine, d isengage the PTO and wait for all mower moving parts to come to a complete stop. Once all mower part s are completely stopped, raise the mower to transport height.
OPERATION CY84 03/08 Operation Section 4- 40 © 2008 Alamo Group Inc. OPERA TION The SMV (Slow-Moving V ehicle) emblem is universal symbol used to aler t drivers of the presence of equipm ent traveling on roadways at a slow speed. SMV signs are a triangular br ight orange with r eflective r ed trim for b oth easy da y and night visibility .
OPERATION CY84 03/08 Operation Section 4- 41 © 2008 Alamo Group In c. OPERA TION Reduce speed before tur ning or applying the brakes. Ensure that both brake pedals ar e locked together when operating on public roads.
OPERATION CY84 03/08 Operation Section 4- 42 © 2008 Alamo Group Inc. OPERA TION Arrange the cha ins so that when tightene d, the chains are pulling downward and against themselves. Ca refully tighten the securing ch ains or other fasteners using boomers or binders to apply maximum tension.
OPERATION CY84 03/08 Operation Section 4- 43 © 2008 Alamo Group In c. OPERA TION 15. TROUBLESHOOTING GUIDE Problem Possible Cause Remedy Not Cutting Clean Blades dull. Sharpen or replace Blades. Blade rot ation incorrect. Use correct Blade for Carrie r .
OPERATION CY84 03/08 Operation Section 4- 44 © 2008 Alamo Group Inc. OPERA TION Blade Bolts W orking Loose Bolts not ti ghtened. T ighten Bolts to 300 ft./lbs. Bolt hole elongated or oversized. Replace Blade Carrier . Locknut worn out. Replace Locknut.
OPERATION CY84 03/08 Operation Section 4- 45 © 2008 Alamo Group In c. OPERA TION Gearbox Leaking Damaged Oil Seal. Replace Seal. No Oil Seal. Install Oil Seal. Oil too light. Use EP140. Bent Shaft. Replace Oil Seal and Shaf t. Oil Seal Race rough. Replace Shaft or repair Race.
.
Maintenanc e Section 5-1 © 2008 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-2 © 2008 Alamo Group Inc. MAINTENANCE Before operat ing your Rotary Cutt er , mak e sure it is properly lubricated and thor oughly in spected. Only a minimum of time and effort is req uired to regularl y lubr icate and maint ain this machine to provide long life and trouble free oper ation.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-3 © 2008 Alamo Group Inc. MAINTENANCE Gearbox Lubrication The Gearbox has been fille d with lubricant to the T est Plug Level prior to shipment . However , you should check the oil leve l at T est Plu g before operating, and freque ntly thereafter .
MAINTENANCE CY84 03/08 Maintenanc e Section 5-4 © 2008 Alamo Group Inc. MAINTENANCE Driveline Lubrication Grease Fitt ings are located on the C ross Assembly o f each U-Join t and on th e telescopin g tubes. Gre ase the U-Joint after ea ch 8 hours of use.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-5 © 2008 Alamo Group Inc. MAINTENANCE Protective, Integral Shields - Lif t-T ype Protective Driveline Shields should be installed on Drivelines as shown in Figure Mnt-0013 below . The protective Integral Shields are assembled onto nylon bea rings and should turn freely - but should not spin.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-6 © 2008 Alamo Group Inc. MAINTENANCE Slip Clutch Avoid overheating of the Slip Clutch by too long or too frequent slipping, as this can damage th e friction plates and limiter part s. When checking Slip Clutch for ov er heating, DO NOT touch with hand.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-7 © 2008 Alamo Group Inc. MAINTENANCE Blade Servicing Inspect blades before each use to determine that they ar e properly inst alled and in good con dition. Replace any blade that is bent, excessively nicked, worn, or has any other damage.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-8 © 2008 Alamo Group Inc. MAINTENANCE Blade Removal T o remove blades for sharp ening or replacement, remove the cover plate on deck o f cutter near gear box. Remove lock nut from blad e bolt. NOTE: Inspect lock nut a fter removal and replace if threads a re damaged.
MAINTENANCE CY84 03/08 Maintenanc e Section 5-9 © 2008 Alamo Group Inc. MAINTENANCE St o r a g e Y our rot ary cutter represent s an investment from which you shou ld get the greatest possible benefit.
RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warra.
T O THE OWNER/OPERA T OR/DEALER In addition to the standard Lim ited W arranty shown on the facing page, Servis-Rhino also provide s: 1.) ONE-YEAR (12 months) {or 6 mo nth for Commercial/Industrial Us ers} LIMITED W ARRANTY on the DRIVELINE component s provided they have been pr operly maintained† and have not been subjected to abuse or mis-use.
CY84-SOM-03/08 P/N 00 771528C Printed U.S.A CY84 ROT AR Y CUTTER.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Servis-Rhino CY84 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Servis-Rhino CY84 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Servis-Rhino CY84, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Servis-Rhino CY84 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Servis-Rhino CY84, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Servis-Rhino CY84.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Servis-Rhino CY84. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Servis-Rhino CY84 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
