Manuel d'utilisation / d'entretien du produit EB1304 du fabricant AVerMedia Technologies
Aller à la page of 56
AVerMedia ® AVerDiGi EB1304 NET Operation Manual www .avermedia.com www .averdigi.com.
FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rule s. Operation is subject to the fo llowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer enc e that may cause undesired operatio n.
- WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SH ORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER.
Table of Contents Chapter 1 Introduction ....................................................................... 1 1.1 Package C ontent........................................................................................ 1 1.2 Features and S pecificat ions .
8.2.1 T o Setup Remote Console Setting ....................................................... 44 8.3 Using the Remo te Play back ..................................................................... 45 8.3.1 Familiarizing the Loc al Playba ck Butt ons .
.
1 Chapter 1 Introduction 1.1 Package Content (1) A V erDiGi EB1304 NET unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold.
2 1.3 Front Panel (1)(2) (3) (4) Name Function (1) DVR Power LED : Light wh en the unit is power on (2) HDD LED : Indicate the hard disk running st ate. Light when the HDD is running (Read/W rite) (3) IR Sensor : Re ceive signal from the remote control to operate the unit (4) USB 2.
3 1.5 Setting Up the DVR Unit 1.5.1 Inst alling the Hard Disk The DVR unit allows user to install one har d disk. Before installing the hard disk, make sure to set the hard disk master ju mper setting. Adjust the jumper se tting according to the instructions on the hard disk label.
4 5. Connect the end of the IDE cable and the power connector to the hard disk 6. Secure the hard disk inside the unit then replace unit cover 7. Push the cover forward 8.
5 1.5.2 Connecting Devices The back panel of the DVR unit, user can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor.
6 1.5.3.1 I/O Card Sensor a nd Relay pinhole allocation: The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door sensors, et c.) is being transmitted to t he unit and this triggers the system to respond and send signal to rela y device (i.
7 Chapter 2 Operating the EB1304 NET 2.1 Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen.
8 Button Func tion ( 11 ) ▼ ▼ Decrease the video playback at t he speed of 2x, 4x 8x or 16x ( 12) ▼ ▼ Fast play the video playback at the speed of 2x, 4x 8x or 16x (13) S top pla ying / S top recording (14) USB backup(see 2.
9 USB BAKCUP YES(SELECT) / NO(MENU) 2.1.2 Using USB Backup Button User can press button to backup the AB Repeat video file. 1. Set the AB Repeat file (see 2.1.1 ). 2. Plug in pen drive or external hard disk to DVR system. 3. During the AB Repeat playback, press button.
10 2.3 Surveillance Screen To know if the channel is being recorded, the “ ” record symbol would appear beside the channel number. The (microphone) and (speaker) indicate that the audio is available.
11 TIME SEARCH (search by date and time): 1. Use the ▲ and ▼ buttons and select SEARCH TIME . Then press or ▼ again to make the selection. 2. In the SEARCH TIME , user may now select the date and time from where you want to begin th e video playback.
12 Chapter 3 OSD Navigation T ree The follow figure is an OSD menu tree m ap. To call out the OSD menu, press on the remote control. RECORD SCHEDULE 13 : 00 - 14 : 00 14 : 00 - 15 : 00 15 : 00 - 16 : .
13 3.1 Menu Function If the unit is currently record ing the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu.
14 OSD MENU Description RECORD SCHEDULE 00 : 00 - 01 : 00 01 : 00 - 02 : 00 02 : 00 - 03 : 00 05 : 00 - 06 : 00 06 : 00 - 07 : 00 07 : 00 - 08 : 00 08 : 00 - 09 : 00 09 : 00 - 10 : 00 10 : 00 - 11 : 0.
15 OSD MENU Description SET NW PASSWORD CURRENT NEW CONFIRM 2006 / 04 / 20 17 : 54 : 50 ON ON ON OFF NO SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RE.
16 OSD MENU Description AUDIO RECORD : Enable/disable audio recording. To reco rd sound, make sure the audio input device (ex: microphone) is connected to the unit AUDIO MUTE : Enable/disable to hear audi o sound. To hear sound, make sure the unit is conn ected to an audio output device (ex: speaker).
17 OSD MENU Description YES HARD DRIVE SETUP OVERWRITE ENABLED HDD SIZE 37 GB 78MB HDD USED 0 GB 232MB 0% HDD FORMAT * HDD SIZE shows the total capacity of the hard disk. * HDD USED shows the amount of space that has been used. OVERWRITE ENABLED : Enable/disable overwriting the earliest record when the hard disk space run s out.
18 OSD MENU Description 010 SEC 010 SEC NOT INSTALLED NOT INSTALLED NOT INSTALLED NOT INSTALLED SENSOR SETUP SENSOR REC TIME ALARM OUT TIME CHANNEL - 1 CHANNEL - 2 CHANNEL - 3 CHANNEL - 4 SENSOR REC T.
19 OSD MENU Description 123 4 5001 5005 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT STATIC host addresses. Enter the subnet mask of the IP address which user ha s assigned to DVR system. - GATEWAY: A netwo rk device act as a passageway to internet .
20 OSD MENU Description 123 4 5001 5005 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT STATIC When DVR system gets an IP address from DHCP server, the information will display as below: 192.168.153.254 192.168.153.1 00.00.00.00.00.00 NETWORK INFORMATION IP ADDRESS SUB NET GATEWAY DNS MAC ADDRESS 192.
21 OSD MENU Description 123 4 5001 5005 1 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT USER SET NW PASSWORD STATIC values and press or ▼ to confirm. VIDEO PORT: A port for the remote connection. Any port can be assigned as a video port, except the ports already used by the network services.
22 OSD MENU Description USB BAKCUP TIME SET START TIME END TIME : 2006 / 05 / 05 13 : 08 : 13 : 2006 / 05 / 04 10 : 00 : 01 BACKUP CHANNEL BACKUP SIZE BACKUP EXECUTE 123 4 73GB 89MB 4. And then, select BACKUP EXECUTE to start backup video to the USB device.
23 C h a p t e r 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in S peak er 1 available USB2.0 port 4.2 Installing the USB Playback Console T o install the USB Playback Console: 1.
24 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (16) (15) (14) (13) (17) (1) Name Function (1) Video playback scre en (2) Open File T o select the video file for pl aying.
25 Name Function (3) Event List Select the event you want to play ba ck. The event list only available when user select to playback in DVR Recorded File(HD) . (4) Full screen Use the entire area of t he screen to only display the video. T o return, press the right button of the mouse or ESC on the keyboard.
26 Name Function (17) Sound /Sound bar T urn on and off the sound Increase and decrease the volume 4.3.1 T o Cut and Save the Portion of the Recorded V ideo 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut.
27 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK . 3. Locate the backup file folder and click OK . i When open the backup video file, just locate the where backup file folder is. 4. And then, Playback Date/Time Select ion window appears.
28 C h a p t e r 5 Backup Recorded Video File 5.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in S peak er 1 available USB2.
29 Name Function (4) Source Disk T o select the hard disk drive (5) T arget Path T o locate on wher e user want to save the file (6) Event (%) Display the backup progress rate of event in percent age .
30 6. Select the hard disk drive and click OK 7. And then, all the recorded video files will list out. 8. Select the event which user wants to backup. Or mark the Select All to select all listed recorded video event 9. Locate on where user wants to save the backup file 10.
31 Chapter 6 ImageV erification Image V erification is a watermark-checking pr ogram to identify t he authenticity of a saved image (e.g. by snapshot).
32 Chapter 7 V ideo Enhancer The bundled V ideo Enhancer is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the vi deo picture quality , segment and save the wanted portion of the video, zoom in and out the image, and print or save the screen shot.
33 Name Function (9) Default Set the video back to original st ate and delete all the changes i n the history box. (10) History Box List all the actions. (1 1) Undo Delete the last action. (12) Noise Reduce Adjust the sof tness and repair the damaged colours.
34 Chapter 8 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. T o use this feature, make su re that you PC and EB 1304 NET both are connected to the internet and t he Network feature is enabled.
35 8.1 Familiarizing the Web Viewer Buttons Right-clicking on the Web V iewer video screen, enables you to start video recording, change video quality , switch camera and enable/disable DirectDraw . Name Function (1) DirectDraw Enhan ce the video quality .
36 Name Function (1 1) Select camera s to view Select to the view camera from dif ferent server . In Select Camera dialog box, Display column, click to enable/disable viewing the camera. Click Add Server and sele ct t he server type between DVR and IP Cam to add.
37 (3) V ideo Adjustment Select the camera and adjust the Bright ness, Contrast, Hue and Saturation of the selected camera. (4) Default V alue Set the video value back to default 8.
38 or LOW . (5) Auto Record Enable/disable auto continue reco rding when interrupted (i.e., power breakdown, video playback or configuratio n setup). It continue recording after 10 second of idleness. This is applic able in Always Record mode under schedule setting.
39 - Alarm Out T ime Set the amount of time (in second) to continue sending the alarm once activated (2) Sensor Setup - Sensor St atus Customize the initial state of the attached sensor fo r every camera . Refer to the table below to custom ize the sensor st ate.
40 8.1.1.4 Network Setup (1) (2) (3) (1) IP Mode - St atic IP Assign a fixed and global IP addr ess for the DVR system IP: Assign a constant IP address which real IP addresses give from ISP . Mask: Enter the subnet mask of the IP address which user has assigned to DVR system.
41 Appendix A ) - Domain Name Enter the domain name that user wanted. - Auth Key A password use to access DDNS to r egister the domain name. MAC address of the DVR system is the key for user to register the domain name on A V erMedia DDNS web site. T o find MAC address of your DVR system, follow the steps below: 1.
42 8.1.1.5 Password Change Click Remote setup button on Web V iewer main interface, and then, click User button to call out the Password Change interface. (1) (2) (1) Superuser Change the remote accessing password of super user . Superuser has the authority to remote setup the DVR system configuration on W eb Viewer .
43 8.2 Familiarizing the Remote Console Buttons (1) (3) (7) (6) (5) (4) (8) (9) (11) (12) (2) (10) (13) Name Function (1) Exit Close the Remote Console.
44 8.2.1 T o Setup Remote Console Setting Click Setup button to call out the System Setting windows. Click OK to exit and save the setting and Cancel to exit without saving the setting. (1) (1) (1) (1) (1) Storag e Path Set the directory on where to save t he data.
45 8.3 Using the Remote Playback T o use this feature, first you need to se lect the source of the file. Click the Playback button. And then, in the Select Playback Mode dialog box, choose Local Playback to open the file that is recorded in the Remote Console, and Remote Pla y back to open the file that is recorded in the DVR server .
46 T o Make a Selection: 1. Select the date in the calendar . Use and buttons to shift the ca lendar to the left or right. 2. In the t able below , click on the blue block to select and open the recorded file. The blue block turns red when it is selected.
47 Name Function (3) Hour Buttons Select and click to playba ck the recorded video file on the specific time frame. i The Hour buttons rep resent the time in 24-hour clock. The blue bar o n top of the hour button indicates that there is a re corded video file on that period of time.
48 8.3.2 Familiarizing the Download and Playback Buttons (2) (8 ) (7 ) (4 ) (6 ) (5 ) (1) (3) Name Function (1) Progress bar Show the prog ress of the file being played. Y ou may move the bar to seek at any location of the track. (2) Playback Control Buttons Begin: Move at the beginning of the video file.
49 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain names into Internet addresses. It allows remote clients to intelligently search dynamic servers without any previous enquiring for servers’ Internet addresses.
50 W arranty Notice LIMITED WARR A NTY AVerMedia TECHNOLOGIES, Inc. warrants th is product to be free of defects re sulting from faulty manuf acture or components under the following terms: WARRANTY L.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté AVerMedia Technologies EB1304 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du AVerMedia Technologies EB1304 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation AVerMedia Technologies EB1304, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le AVerMedia Technologies EB1304 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le AVerMedia Technologies EB1304, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du AVerMedia Technologies EB1304.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le AVerMedia Technologies EB1304. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei AVerMedia Technologies EB1304 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
