Manuel d'utilisation / d'entretien du produit 830 S du fabricant Sennheiser
Aller à la page of 40
Set 830 S cordless TV listening system Instruction manual.
I 1 3 4 7 5 7 6 2 Q.
II D C 9 8 0 A H G F E B.
.
1 Contents Contents Safety instructions ................. ................ .......................... ...... 2 Delivery includes .................. ................................ ............. ...... 4 Product overview ................. ............
2 Safety instructi ons Safety instructions • Please read this inst ruction manual careful ly and completely before using the devi ces. • Make this instruction manual easi ly accessible to all users a t all times. Always incl ude this instruct ion manual when passing the devices on to third parties.
3 Safety instructions Intended use of the devices Intended use includes: • having read this instruct ion manual, especially the chapter “Safety instructions”, • using the devices w ithin the operating cond itions and limi tations described in this instruction manual.
4 Delivery includes Delivery includes Delivery of the Set 830 S system includes: 1R I 8 3 0 S r e c e i v e r with BA 300 Lithium-Ion rechargeable battery 1 TI 830 transmitter with integrated char ging compart-ments 1 EZT 3011 induction loop 1 NT 13 mains unit with 3 country adapters (EU, UK, US) 1 connection cable with two 3.
5 Product overview Product overview Receiver (see inside cover) 1 Channel indicator 2 Volume control 3 On/off button 4 Balance control 5 Channel search button 6 Battery compartment 7 Socket for headph.
6 Putting the Set 830 S into operation Putting the Set 830 S into operation Setting up the transmitter 왘 Place the transmitter so that: – there are no obstacles in th e light path between trans- mitter and receiver and – transmitter and receiver ar e not exposed to direct sun- light.
7 Putting the Set 830 S into operatio n Connecting the transmitter to a sound source 왘 Switch your sound source (e .g. TV) off before connecting the transmitter. 왘 Plug one end of th e connection cable I into the blue socket E on the transmitter. 왘 Check the connection possibil ities of your sound source (e.
8 Putting the Set 830 S into operation Connecting the transmitter to a headphone socket 왘 Adjust the volum e of th e headphone socket on your sound source to a medium level. This improves the quality of cordless sound transmission. For detailed information, plea se refer to the instruction manual of your soun d source (e.
9 Putting the Set 830 S into operatio n Connecting the transm itter to a SCART socket Note: If your TV has several SC ART sockets, use the socket SCART output .
10 Putting the Set 830 S into operation Connecting the transmitter to the mains – If there is no audio signal from the sound source for about 3 minutes, the transmi tter automatically switches off. The operation indicator B goes off. 왘 Select the suitable country adapter N for your wall socket.
11 Putting the Set 830 S into operatio n W earing the receiver around the neck Use the supplied lanyard P or induction loop Q to wear the receiver around your neck. Note: If you want to use the rece iver with your hearing aid, attach the induction loop instead of the lanyard.
12 Putting the Set 830 S into operation Connecting headphones or the induction loop for hearing aids to the receiver The socket 7 on the receiver allows you to connect • headphones, • the induction loop Q or • a connection cable to your hearing aid.
13 Using the Set 830 S Using the Set 830 S T o switch the Set 830 S system on, proceed as follows: 1. Switch your sound source (e.g. TV) on. The transmitter automatically switches on (see next chapter). 2. Switch the receiver on (see page 14). 3. Adjust the desired volume (see page 14).
14 Using the Set 830 S Switching the receiver on/off Adjusting the volume Hearing damage due to high volumes! This receiver allows you to set higher volumes than conventional headphones. This can cause hearing damage in persons with healthy hearing and especially in children.
15 Using the Set 830 S Searching for a sound source 왘 Switch the receiver on. Do you hear the de sired sound source? Ye s: The receiver has already found the sound source. 왘 If you still haven’t found y our sound source, press the channel search button once more.
16 Using the Set 830 S Switching between mono and stereo operation If, despite a correct balance adjustment, you can hear the sound only with one ear: Meaning of the terms “mono” and “stereo” 왘 Set the ST/MO switch F on the transmitter to MO (mono).
17 Using the Set 830 S Individually enhancing the speech intelligibility 왘 Press the “speech intelligibility” button C until the sound is optimally adju sted to your needs. If necessary, you can have th e speech intelligibility fine adjusted to your hearin g ability (see page 26).
18 Using the Set 830 S Storing and charging th e receiver Notes: – With a fully charged battery, the operating time is up to 12 hours . – If you have several receiver s, they can be used during charging. – Always store the receiver in the transmitter’s charging compartment 8 to ensure that it is fully charged.
19 Using the Set 830 S Charging a rechargeable battery in the transmitter’s charging compartment You can charge the receiver’s rechargeable battery or a spare BA 300 rechargeable battery (not included in the delivery of the Set 830 S) in the charging compartment 9 at the side of the transmitter.
20 What if... What if... ...this indicator lights up? ...you press this button? Indicator Status Meaning Channel indicator 1 on the receiver lit yellow Receiver has just been switched on or a button has just been pressed. off Receiver is switched on for more than 30 secs.
21 What if... ...you change the position of this control/switch? ...you hear acoustic signals or warning signals? Control/switch Function see page V o lume control 2 on the receiver Reduces or increases the volume of the receiver. 14 Balance control 4 on the receiver Increases the volume for the lef t or the right ear.
22 What if... Note: W arning signals canno t be switched off. W arning signal Meaning 6 short beeps The receiver does not receive any signal from the transmitter: • T rans mitter and receiver are too distant. The receiver switches off af ter 3 minutes.
23 Cleaning the Set 830 S Cleaning the Set 830 S Cleaning the transmitter and the receiver 왘 Before cleaning, disconnect the transmitter from the mains.
24 If a problem occurs ... You cannot hear anything Possible cause Solution Is there a free line of sight between receiver and transmitter? Remove obstacles in the light path between receiver and transmitter. Are transmitter and receiver exposed to direct sunlight? A void exposure to direct sunlight.
25 If a problem occurs ... You hear the sound only with one ear The sound of your sound so urce is hardly intelligible Possible cause Solution Is the balance adjusted correctly? T u rn the balance control 4 to the lef t or right (see page 15).
26 Additional technica l information The loudspeakers of your TV are muted If a problem occurs that is not listed in the above tables or if the problem cannot be solv ed with the proposed solu- tions, please contact your Se nnheiser partner for assis- tance.
27 Additional technical informati on Compression (settings 1 and 3) Deterioration of the abili ty to hear quiet sounds as well as loud ones is a typical symptom of old age. Compression compensates for these volume difference s by boosting the volume of quiet sounds and reducing the volu me of lo ud sou nds if necessary.
28 Additional technica l information Changing the operating mode The transmitter can be set to a different operating mode. Th is is useful when the sound of your sound source is very low and the transmitter therefore does not always switch on automatically.
29 Accessories and spare parts Accessories and spare parts Do you wish to use a dditional receivers? The following receivers are a vailable from your specialist dealer: CAUTION! Danger of damage to the device! Components from othe r manufacturers (e.g.
30 Accessories an d spare parts The following Set 830 S accesso ries are available from your specialist dealer: Cat. No. Accessory/spare part HZL connection cables 001676 HZL 30-6 (3.5 mm jack plug to 1 mini-plug, 40 cm) 004658 HZL 30-600 (3.5 mm jack plug to 1 mini-plug, 60 cm) 001678 HZL 32-6 (3.
31 Specifications Specifications System Modulation FM, stereo Carrier frequencies 2.3 MHz/2.8 MHz Frequency response 50 Hz–16,000 Hz THD < 1 % Charging time for rechargeable battery approx. 3 hours Signal-to-noise ratio (1 mV, peak deviation) typ.
32 Specifications The devices comply with the following standards: NT 13 mains unit Nominal input voltage 100 V~ to 240 V~ Mains frequency 50–60 Hz Max. power cons umption 2.4 W (incl. battery charging) Nominal output voltage 13.5 V DC Nominal output current 500 mA Standby consumption approx.
33 Manufacturer Declaration s Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 mo nths on this product. F or the current wa rranty conditions, please visit our web site at www.sennheiser. com or contact your Sennheiser part ner.
34 Index Index Receiver Adjusting the balance 15 Adjusting the volume 14 Attaching the receiver to clothing 11 Channel indica tor (meaning) 20 Cleaning 23 Indicators (meaning) 20 No sound signal 24 Op.
.
Sennheiser electronic GmbH & Co. KG Printed in China Am Labor 1, 30900 Wede mark, G ermany Publ. 07/08 www.sennheiser.com 5282 /A01 51.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sennheiser 830 S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sennheiser 830 S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sennheiser 830 S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sennheiser 830 S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sennheiser 830 S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sennheiser 830 S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sennheiser 830 S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sennheiser 830 S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
