Manuel d'utilisation / d'entretien du produit NTEL08911.0 du fabricant Sears
Aller à la page of 32
USER’S MANUAL Serial Number Decal CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. Model No. NTEL0891 1.0 Serial No. Write the serial number in the space above for reference.
2 T ABLE OF CONTENTS W ARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown.
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
4 Thank you for selecting the revolutionary NORDICTRACK ® ACT elliptical. The ACT elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the elliptical.
5 P ART IDENTIFICA TION CHART Use the drawings below to identify the small parts needed for assembly . The number in parentheses below each drawing is the key number of the part, from the P ART LIST near the end of this manual. The number following the key number is the quantity needed for assembly .
6 1. Remove the four screws and the four shipping brackets (only one of each is shown) from the Frame (1). Discard the screws and the shipping brackets. Then, tighten the four Leveling Feet (52) (only one is shown) into the underside of the Frame (1).
7 2. Identify the Frame Cover (54), and orient it as shown. Slide the Frame Cover onto the Frame (1), and press the posts on the Frame Cover into the indicated holes in the Frame. Next, orient the Upright (2) as shown. While a second person holds the Upright near the Frame (1), connect the Upper Wire Harness (81) to the Lower Wire Harness (82).
8 4 A void pinching the Heart Rate Wires (92) 4 5 62 80 92 Wire T ie 80 62 2 4. Identify the Right Handrail (5), which is marked with an “R” on the underside. Orient the Right Handrail as shown. While a second person holds the Right Handrail (5) near the Upright (2), tie the indicated wire tie to the Right Heart Rate Wire (92).
9 6 7 6. Using a small plastic bag to keep your fingers clean, apply a generous amount of the included grease to the right axle on the Upright (2). Next, identify the Right Handlebar Leg (13), which is marked with an “R” sticker , and orient it as shown.
10 8 9 8. Apply a small amount of grease to the axle on the Left Pedal Arm (14). Position the Left Handlebar Leg (12) as shown. Then, insert the Left Pedal Arm (14) into the Left Handlebar Leg. Attach the Left Pedal Arm with an M10 x 20mm Screw (61), a Pedal Axle Cover (39), and an M10 W asher (64).
11 10 10. Identify the Right Large Rail Cover (93), and orient it as shown. Press the Right Large Rail Cover into the Right Outer Shield (17). Next, identify the Right Small Rail Cover (7), and orient it as shown. Press the Right Small Rail Cover into the Right Large Rail Cover (93) and into the Right Outer Shield (17).
12 12 12. While a second person holds the Console (3) near the Upright (2), connect the four wires on the Console to the Upper Wire Harness (81), the two Heart Rate Wires (92, 1 16), and the Receiver Wire (109). Insert the excess wire into the Upright.
13 HOW T O USE THE ELLIPTICAL HOW TO PLUG IN THE POWER ADAPTER IMPORT ANT : If the elliptical has been exposed to cold temperatures, allow it to warm to room tem- perature before you plug in the power adapter . If you do not do this, you may damage the console displays or other electronic components.
14 HOW TO EXERCISE ON THE ELLIPTICAL T o mount the elliptical, hold the handlebars and step onto the pedal that is in the lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedals can turn in either direction.
15 CONSOLE DIAGRAM FEA TURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
16 HOW TO ACTIV A TE THE CONSOLE The included power adapter must be used to operate the elliptical. See HOW T O PLUG IN THE POWER ADAPTER on page 13. When the power adapter is plugged in, the display will light and the console will be ready for use.
17 Stride —This display mode will show the total num- ber of strides you have pedaled. Time —When the manual mode is selected, this display mode will show the elapsed time. When a workout is selected, this display mode will show the time remaining in the workout.
18 If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly . For optimal perfor- mance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.
19 During the workout, the profiles on the speed tab will show your progress. The flash- ing segment of the profile represents the current segment of the workout.
20 HOW TO USE AN IFIT LIVE WORKOUT Y ou must have an iFit Live module to use an iFit Live workout. T o purchase an iFit Live module at any time, go to www .iFit.com or call the telephone num- ber on the front cover of this manual. Note: T o use an iFit Live module, you must have access to a computer with an internet connection and a USB port.
21 HOW TO USE THE SOUND SYSTEM T o play music or audio books through the console sound system while you exercise, plug the included audio cable into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in.
22 I nspect and tighten all parts of the elliptical regularly . Replace any worn parts immediately . T o clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORT ANT : T o avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
23 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results.
24 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. T oe T ouch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
25 NOTES.
26 NOTES.
27 1 1 Frame 2 1 Upright 3 1 Console 4 1 Left Handrail 5 1 Right Handrail 6 1 Left Small Rail Cover 7 1 Right Small Rail Cover 8 2 Pedal Leg 9 1 Right Pedal 10 1 Left Handlebar 1 1 1 Right Handlebar 1.
28 93 1 Right Large Rail Cover 94 2 Handle Bottom 95 1 M5 x 7mm Screw 96 1 Magnet Bracket Bolt 97 1 Pivot Screw 98 13 M4 x 16mm Bright Screw 99 1 M3.5 x 12mm Screw 100 1 M6 Locknut 101 2 M8 Jam Nut 10.
29 EXPLODED DRA WING A 4 91 6 8 10 12 16 18 20 22 24 26 27 28 111 29 31 33 33 34 34 35 35 49 38 60 61 90 61 61 61 68 68 61 62 67 94 79 62 64 64 56 14 36 78 78 78 74 67 74 67 67 67 67 67 67 67 67 67 73 67 67 67 67 73 67 67 39 61 64 37 37 59 75 80 80 85 60 79 11 3 11 3 11 2 11 7 98 98 98 98 11 4 98 98 Model No.
30 EXPLODED DRA WING B 8 11 13 21 23 25 26 27 28 29 31 33 33 34 34 35 35 37 59 39 56 49 38 60 61 68 61 61 61 79 64 64 64 67 67 67 67 67 67 67 9 15 36 78 78 78 75 74 74 37 60 79 109 111 98 98 98 98 11 4 11 8 98 98 Model No.
31 EXPLODED DRA WING C 1 2 3 5 7 93 94 17 19 40 41 42 63 43 44 44 44 44 44 44 44 44 45 45 45 45 45 45 46 47 46 47 48 48 50 50 50 50 51 51 52 52 52 52 53 54 55 59 59 61 61 62 69 69 62 62 62 11 5 11 3 1.
Part No. 314146 R051 1A Printed in China © 201 1 ICON IP , Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, please see the front cover of this manual.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sears NTEL08911.0 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sears NTEL08911.0 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sears NTEL08911.0, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sears NTEL08911.0 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sears NTEL08911.0, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sears NTEL08911.0.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sears NTEL08911.0. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sears NTEL08911.0 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
