Manuel d'utilisation / d'entretien du produit 3350DNP du fabricant Savin
Aller à la page of 230
3350DNP/ 5450 OPERATING INSTRUCTIONS TPEH162N Read this manual carefully before you use this product and keep it handy for future reference. For safety, p lease follow the instructions i n this manual.
Note to users in the United States of America Notice: This equi pment has b een tested an d found to com ply with the limits for a Cla ss A digital dev ices, pur- suant to Part 15 of t he FCC R ul es.
i Safety Information When using your machine, the following safety precauti ons should always be followed. Safety Du ri ng Operat io n In this manual, the following i mportant symbols are used: Examples Of Indica tions R WARNING: Ignoring this warni ng coul d caus e seri ous inj ury or ev en de ath.
ii R R R R Warning: • Only connect the mach ine to the power sou rce described on the inside front cover of this manual. • Avoi d mu lt i -wi r ing. • Do no t damage , bre ak or ma ke an y modi ficat ions to the pow- er cord. Do not place heavy ob jects on it , pull it ha rd or be nd it more th an nec essary.
iii R R R R Caution: • Keep the machine away from humid ity and dust. A fire or an elec- tric shock might occur. • Do not place the machin e on an un stable o r tilted surface. If i t top- ples over, it could cause injury. • After you move the mach ine, fix it with the caster fixture.
iv • Keep the ink or ink container out of reach of children. • If ink is ingested, force vomi ting by dri nking a strong sali ne sol u- tion and consult a doctor immediately. • Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or ma sters.
v How To Read This Manual Symbols In this manual, the following sy mbols are used: R WARNING: This symbol indicates a potentially ha zardous situation that might result in death o r serious injury wh en you misu se the m achine w ithou t following the in- structions under this symbol.
vi Making Prints Before making prints us ing this ma- chine, you have to make a m aster by pressing the { Start } key. When you press the { Star t } key, the machine scans the origin al image and makes a master. This p rocedure describ es how to ma ke basic prints.
vii key. See ⇒ P.26 “Adjusting Print Image Density” . D Enter the desired number of prints with the Number keys. E Press the { { { { Print } } } } key. When the print job has finished, press the { Clear Modes } key. Previ- ously entered job settings will be cleared.
viii What You Can Do With This Machine ❖ ❖ ❖ ❖ Standard Printing See ⇒ P.20 “Standard Printing” . ❖ ❖ ❖ ❖ Ad jus tin g P rin t Im ag e Po s it ion See ⇒ P.25 “Adj usting Print Image Posi tio n” . *: Paper feed dire ction ❖ ❖ ❖ ❖ Ad jus tin g P rin t Im ag e De n sit y See ⇒ P.
ix ❖ ❖ ❖ ❖ Stretching A nd Squeezing The Image In 1 % St eps See ⇒ P.37 “Di rection al Magni fica- tion—S tretching A nd Squeez ing The Image In 1 % Steps” . ❖ ❖ ❖ ❖ Erasing Edge Margins See ⇒ P.40 “Edge Erase—Era sing Edge Margins” .
x ❖ ❖ ❖ ❖ Making Variable Numbers Of Prints From Different O riginals See ⇒ P.58 “M anual Class Mode With 2 Or More Origin als—Ma king Variab le N umbers Of Prin ts From Differen t Ori ginal s” . ❖ ❖ ❖ ❖ Making Fixed Numbers Of Prints From The Same Ori ginal See ⇒ P.
xi ❖ ❖ ❖ ❖ On Line Printing See ⇒ P.80 “On Line Printing” . ❖ ❖ ❖ ❖ Making Color Print s See ⇒ P.87 “Making Colo r Prints” . ❖ ❖ ❖ ❖ Printing In Two Colors See ⇒ P.88 “Printing In Two Co l- ors” . ❖ ❖ ❖ ❖ Rotating The Original Images See ⇒ P .
xii ❖ ❖ ❖ ❖ Printing Your Own M essages On Your Prints See ⇒ P.122 “User Stam ping— Printin g Your Own Me ssage s On Your Prints ” . ❖ ❖ ❖ ❖ Combining O riginals Into One Print With The Memory Board See ⇒ P.124 “Memory Combine— Combining Or iginals Into One Print Wit h The M emo ry Bo ard” .
xiii TABLE OF CONTENTS Machine Exterior ....... .............. ......... .............. .......... .............. ......... ........... 1 Machine Inter ior ........ ......... .............. .......... .............. ......... .............. ......... .
xiv Entering The Dimensions Of The Original And Pri nt Paper ........... ....... ...... 38 Edge Erase—E rasing Edge Margins... ......... .............. .......... .............. .... 40 Printing On Va rious Kinds Of Paper ............ .......... ...
xv 2. OPTIONAL FUNCTIONS Printing Using The Opti onal Document Feeder........ .............. .............. 81 Originals .......... .. ...... .. ...... .. ........ ..... ... ..... ... ..... ... ........ ..... .. ...... .. ...... .. ..... ... ... 81 Setting Originals In The Document Feeder .
xvi 2. Set Operation Modes ....... ........ ........ ....... ........ ........ ........ ........ ........ ...... 136 3. Initi al Setting............. ..... ........ ........ ..... ........ ........ ..... ........ ........ ........ ..... . 137 4. Mode Setting .
xvii Poor Printing ............. ......... .............. .......... .............. ......... .............. ....... 185 Dirty Background .......... ........ ........ ..... ........ ........ ..... ........ ........ ..... ........ ...... 185 Black Line/Stai n .
xviii This page is intentionall y blank..
1 Machine Exterior 1. Front Door Open for access to the inside of the ma- chine. 2. Flip-up Cover Open to access the { Image Density } key and so on. See ⇒ P.6 “Operation Panel” . 3. Operation Panel Operator control s and ind icators are lo- cated here.
2 Machine Interior 1. Main Switch Use to turn t he power on or o ff. 2. Paper Alignm ent Wing Kno bs Use to lift or lower the paper al ignment wings. 3. Paper Alignm ent Wings Lift or low er th e wi ngs dep endi ng o n the paper typ e you use. 4. Paper Delivery End Plate This plat e aligns the lea ding edge of prin ts.
3 7. Paper Delivery Sid e Plates These plates align the pr ints on the paper deliv ery tray. 8. Paper Delivery Sid e Plate Kno bs Use to move the side plates. 9. Master Eject Unit Front Handle E1 Use to pull out the master e ject unit. 10. Ink Holder Set the ink c artridg e in this hol der.
4 Options 1. Document Feeder Note ❒ Other options : • Co lor Drums: A3, 11" × 17" drum (red, blue, green, a nd brown) • Color Dr ums : A4, 8 1 / 2 " × 11" drum (black, red,.
5 This page is intentionall y blank..
6 Operation Panel Keys 1. { { { { Quality St art } } } } key See ⇒ P.76 “Qualit y Star t Mode— Regain - ing The Im age Densit y When Th e Ink On The Drum Dries” . 2. { { { { Security } } } } key See ⇒ P.75 “Security Mode—Pri nting Se- cret Documents” .
7 15. { { { { Class } } } } key Press to select All Class, A uto Class, Manual Class, or Class mode. See ⇒ P.51 “All Class Mode—Making Variable Num- bers Of Prints From T he Same Original Us- ing All Stored Data” , ⇒ P.53 “Auto Class Mode— Making Variable Numbers Of Prints From The S ame Original Using Stored Data” , ⇒ P.
8 Indic ators 1. Special Feature indicator This in dica tor is lit when you pr ess keys under the flip-u p cover. 2. Moni tors The monitors l ight up when a no n-stan- dard condi tion occur s within t he ma- chine. See ⇒ P.165 “If Your Machin e Does Not Operate As You Want” .
9 Panel Display The panel dis play shows operational status , error messages, and function menus. 1. The function items for the s elect- ed function are dis played. 2. These keys correspond to the item on the display. Press a relev ant key to select a funct ion.
10 Display Panel Layo ut The basic elements u sed on the display are sh own below. Understanding their meaning helps you exploit this machine's features quickly and e asily. ❖ ❖ ❖ ❖ Sa mple Disp l ay fo r S el ect ing t he [ Original ] key 1.
11 1. OPERATION Printing Paper The following types of print paper are not recommended for this machine. • P aper smaller than 70 mm × 148 mm, 2.8" × 5.9" • P aper larger than 297 mm × 432 mm, 11.6" × 17.0" • Paper heavier than 209.
OPERATION 12 1 Important ❒ Correct curls in the pape r before setting it in the machine. When you cannot correct the pap er curl, stack the paper with the curl face down. If paper is curled, it might wrap around the drum or stains might appear. Do not store paper where it will be exposed to heat or direct sunlight.
Originals 13 1 Originals The following origi nal sizes set on the exposure glass (contact glass) c an be de- tected. Under the following co nditions, the machine might not detect the original. In this case, s elect the original image area with the { Edge Eras e } key.
OPERATION 14 1 The first 10 mm, 0.4 ", of the leading edge and the last 2 mm, 0.08”, of the trailing edge cannot be printed. Make sure the leading edge margin is at least 10 mm, 0.4", and the trailing edge margin is at least 2 mm, 0.08”.
Preparation For Printing 15 1 Preparation For Printing Loadin g Paper A Carefully open the paper f eed tray. B Lift the feed side/end plates. C Grasp the side/end plat e knob and adjust the side/end pla tes to match th e paper s ize. D Place the pa per on the paper feed tray.
OPERATION 16 1 Setting Up The P aper Deli very Tray A Grasp the end plate knob and move th e paper delivery end plate to match the print paper size. When you use A4, 8 1 / 2 " × 11" L or small er paper A Adjust the end plate to match the paper size scale on the op- eration panel side.
Preparation For Printing 17 1 C Lower or lift the paper align ment wings by turnin g the left and righ t kno bs. Note ❒ When the guides are up, you might not be able t o load the unit to full capaci ty (1,000 sheets) depending on the paper you are using.
OPERATION 18 1 E Turn on the main switch. Note ❒ You can have t he mach ine dis- play how much ink and master are left when you switch it on. See “User Tool s—Ink/Ma ster Left” in ⇒ P.
User Codes 19 1 User Codes Preparation You have to turn on User Code mode and register your user c ode with the user tools. You can regis- ter up to 20 user c odes. See “Set User Code”, “Reg. User Code”, in ⇒ P.146 “6. Set User Co de (s)” .
OPERATION 20 1 Standard Printing A Lift the platen cover. Note ❒ Be sure to lift the platen cover more than 30 cm, 12". B Set the original face down on the exposure glass (contact glass). The original should be aligned to the rear left corner. C Lower the platen co ver.
Standard Printing 21 1 G Press the { { { { Proof } } } } key and chec k the image density and the image position of the proof pr int. Note ❒ If the image position is not cor- rect, adjust it using the [ Image = ] key. See ⇒ P.25 “Adjusting Print Ima ge Positio n” .
OPERATION 22 1 Loading Paper On The Paper Feed Tray The Load Paper indicato r ( B ) lights when the paper feed tray runs out of paper. Replenish ing Pa per A Press the { { { { Cl ear/S to p } } } } key. Note ❒ This step is necessar y only if you want t o pause a print run to replenish pap er.
Loading Paper On The Paper Feed Tray 23 1 Changin g The Pape r Size A Remove the paper from the pape r feed tray. The paper feed tray will lower. B Grasp the side/end plat e knob and adjust th e paper feed sid e/ end plates to match the paper size. C Place the pa per on the p aper fe ed tray.
OPERATION 24 1 Closing The Paper Feed And Paper Delivery Trays A Remove the paper from the pape r feed tray. The paper feed tray will lower. B Turn off the main switch. C Adjust the side/ end plates to match A4 L L L L paper an d lower them. D Close the paper feed tray.
Adjusting Print Image Position 25 1 Adjusting Print Image Position You can adjus t the pri nt image posi- tion to suit yo ur needs. *…Paper feed direction A Press the [ Image = = = = ] key. Note ❒ Yo u can skip step A and adjust the image position dire ctly by pressing the { ~ } , { } } , { | } , an d { { } keys.
OPERATION 26 1 Adjusting Print Image Density You can adj ust the print i mage densi- ty to suit your needs. There are two ways to d o this: ❖ ❖ ❖ ❖ Before Ma king A Maste r Use the { Image Densi ty } key. ❖ ❖ ❖ ❖ After Ma kin g A Ma st er Use the { Speed } keys .
Tint Mode—Halftone Printing 27 1 Tint Mode—Halftone Printing Use this fun ction to pr int tinted imag- es. A Press the { { { { Tint } } } } key. B Press the { { { { Star t } } } } key.
OPERATION 28 1 Changing The Printing Speed Use the { Speed } keys to adjust the printing speed. T he relationship be- tween printing speed and print qu ali- ty de pends o n the t ype o f pape r you use. A Press the { { { {V V V V} } } } key to increase the speed and press the { { { {W W W W} } } } key to re- duce the speed.
Stopping The Machine During A Multi-print Run 29 1 Stopping The Machine During A Multi-print Run When You Want To Stop The Machine During A Mult i-pr int Run And Prin t A Differen t Origina l A Press the { { { { Cl ear/S to p } } } } key. B Set the new original.
OPERATION 30 1 Preset Reduce/Enlarge—Reducing And Enlarging Using Preset Ratios You can select a pr eset ratio for print- ing. Note ❒ The leading edge of the print im- age does not shift when a prin t im- age is made with this fu nction. *…Paper feed direction a=10 mm, 0.
Preset Reduce/Enlarge—Reducing A nd Enlarging Using Preset Ratios 31 1 A Press the [ Rati o ] key. B Select the desired ratio with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. C Press the [ OK ] key.
OPERATION 32 1 Auto Magnification Selection—Having The Machine Choose The Reproduction Ratios The machine can choose an approp riate reproduction ratio based on the paper and original sizes you use. Note ❒ You can change the reproduc tion ratio from 50 % to 200 % when you set an original on the exp osure glass (contact glass).
Auto Magnification Selection— Having The Machine Choose The Reproduction Ratios 33 1 *2 Set these orig inals in the optional document feeder. ❖ ❖ ❖ ❖ Inch version *1 When your machine is equ.
OPERATION 34 1 E Press the { { { { Star t } } } } key. F Check the image position of the trial or p roof print. Note ❒ If the image position is not correct, adj ust it using the [ Image = ] keys (See ⇒ P.
Zoom—Reducing And Enlarging In 1 % Steps 35 1 Zoom—Reducing And Enlarging In 1 % Steps You can change the reproduction ra- tio in 1 % steps. Note ❒ You can ch ange the reprodu ction ratio from 50 % to 200 % when you set an original on the exposure glass (contac t glass).
OPERATION 36 1 Using t he nu mber ke ys A Enter the ratio wi th the Num- ber ke ys. B Press the { { { { Ente r } } } } key. G Press the [ OK ] key. H Make sure that the original and the print paper are the corr ect size. I Set your origin al on the exposure glass (contact glass) or in the op- tional document feeder.
Directional Magnification—Stretching And Squeezing The Image In 1 % Steps 37 1 Directional Magnification—Stretching And Squeezing The Image I n 1 % Steps Prints can be reduced or enla rged at different re production ratios horizon- tally and vertically.
OPERATION 38 1 F Enter the vertical and horizontal ratio. Note ❒ To change the value entered, press the { Clear /Stop } key and enter the new value. Adjusting ratios with the [ ← ← ← ← ] , [.
Directional Magnification—Stretching And Squeezing The Image In 1 % Steps 39 1 C Press the [ OK ] key. D Select [ Direct. Mag. ( size) ] with the [ → → → → ] or { { { { } } } } } } } } key. E Press the [ OK ] key. F Enter the vertical original size with the Number keys and press the { { { { Ente r } } } } key.
OPERATION 40 1 Edge Erase—Erasing Edge Margins This function erases all four sides of the original image. ❖ ❖ ❖ ❖ Using Edge Erase mode ❖ ❖ ❖ ❖ When not using Edge Erase mode When printing from thick books, or similar originals, the binding margin at the cent er and the edges might appear on prints.
Edge Erase—Erasing Edge Margins 41 1 F Press the { { { { Star t } } } } key. G Check the image position of the trial or p roof print. Note ❒ If the image position is not cor- rect, adjust it using the [ Image = ] key (see ⇒ P.25 “Adjusting Print Ima ge Positio n” ).
OPERATION 42 1 Printing On Various Kinds Of Paper Printin g On Thic k Paper When you make prints on thick (157 to 209.3 g/m 2 , 42 to 55.6 lb) pap er, perform the following steps. A Press the [ Ppr. Type ] key. B Select [ Thick ] with the [ → → → → ] or { { { { } } } } } } } } key.
Printing On Various Kinds Of Paper 43 1 Note ❒ If necessary, lower or lift the pa- per alignment wings. See ⇒ P.15 “Preparation For P rinting ” . E Set the s ide pads (mo ve the sid e pad levers to as s hown). Printin g On Envel opes A Press the [ Ppr.
OPERATION 44 1 A Press the [ Ppr. Type ] key. B Select [ User 1 ] or [ User 2 ] with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Selecting A Mode To Match Your Original 45 1 Selecting A Mode To Match Your Original Select one of the following four mode s to ma tch your ori gina ls: ❖ ❖ ❖ ❖ Photo mode Delicate tone s of photographs an d pictures can be reproduced with this mode.
OPERATION 46 1 F Adjust the lightness with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. G Press the [ OK ] key. H Set your origin al on the exposure glass (contact glass) or in the op- tional document feeder.
Selecting A Mode To Match Your Original 47 1 G Press the { { { { Star t } } } } key. H Check the image position of the trial or p roof print. Note ❒ If the image position is not cor- rect, adjust it using the [ Image = ] key (see ⇒ P.25 “Adjusting Print Ima ge Positio n” ).
OPERATION 48 1 Economy Mode—Saving In k W h e n y o u w a n t t o s a v e i n k , s e l e c t Econ omy mo de. Note ❒ Prints will be lighter in th is mode. A Press the { { { { Economy Mode } } } } key. B Set your origin al on the exposure glass (contact glass) or in the op- tional document feeder.
Auto Cycle—Making Master And Prints At One Stroke 49 1 Auto Cycle—Making Master And Prints At One Stroke Use th e { Auto Cycle } key t o pr oces s masters and make prints at one stroke. Note ❒ When you use the optional docu- ment feeder , it is not nece ssary to place originals one by one.
OPERATION 50 1 ❒ If you s et original in the op tion- al document feeder, origina ls are fed and prints are complet- ed automatically..
All Class Mode—Making Variable N umbers Of Prints From The Same Original Using All Stored Data 51 1 All Class Mode—Making Variable Numbers Of Prints From The Same Original Using All Stored Data Preparation You have to store the number of students in each c lass with the us er tools.
OPERATION 52 1 E Press the { { { { Star t } } } } key. F Check the image position of the trial or p roof print. Note ❒ If the image position is not cor- rect, adjust it using the [ Image = ] key (see ⇒ P.25 “Adjusting Print Ima ge Positio n” ).
Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data 53 1 Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data Preparation You have to store the number of students in each c lass with the us er tools.
OPERATION 54 1 C Press the [ OK ] key. D Select the des ired classes for each grade. Selecting classe s with the { ~ } , { } } , { | } , or { { } key A Select t he desir ed clas s for th e 1 st grade with the { { { { } } } } } } } } key. You will find the number of stu- dents is dis played on the counter.
Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data 55 1 key and press th e [ Can cel ] key. ❒ Repeat steps A and B until you have finished sele cting all the desire d classes. E Press the [ OK ] key. F Set one original on the exposure glass (contact glass) or in the op- tional document feeder.
OPERATION 56 1 Manual Class Mode With One Original— Making Variable Numbers Of Prints From The Same Original Use the { Class } key to make sets of prints from the same original. V ari- ous numbers of prints are made for each set. Note ❒ Wh en you se t Ma nual Clas s mode, Job Separation mode is automati- cally turned on.
Manual Class Mode With One Original—Making Variable N umbers Of Prints From The Same Original 57 1 E Press the { { { { Enter } } } } key. F Enter the desired number of prints for the second set with the Number keys . G Press the { { { { Enter } } } } key.
OPERATION 58 1 Manual Class Mode With 2 Or More Originals—Making Variable Numbers Of Prints From Different Originals Preparation To use this func tion, you have to select “by each origin al” with the “Class Manual Set” user tool. See “Class Manu al Set” in ⇒ P.
Manual Class Mode With 2 Or More Originals—Making Variable Numbers Of Prints From Different Originals 59 1 E Press the { { { { Enter } } } } key. F Enter the desired number of prints for the second original with the Number keys. G Press the { { { { Enter } } } } key.
OPERATION 60 1 M Press the { { { { Print } } } } key. N After the first set is completed, set the second original on the e xpo- sure g lass (co ntact g lass) an d press the { { { { Star t } } } } key. Note ❒ Repeat step N until y ou have finished printing.
Class Mode—Making Fixed Numbers Of Prints From The same Original 61 1 Class Mode—Making Fixed Numbers Of Prints From The same Original Use the { Class } key to make sets of pri nts f rom the sa me or igi nal . Th e same numbers of prints are made for each set.
OPERATION 62 1 F With the Number keys, enter the nu mb e r of se ts yo u w is h to m ak e. Note ❒ Up to 99 sets can be selected for an original. G Press the [ OK ] key. H Set one original on the exposure glass (contact glass) or in the op- tional document feeder.
Combine Originals—Co mbining Originals Into One P rint 63 1 Combine Originals—Combining Originals Into One Print You can combine originals in two ways: ❖ ❖ ❖ ❖ 2 One-side d Originals → → → → 1 One-s ided Print Of 2 Images Combine two single-sided originals onto one single-sided print with the two images placed side-by-side.
OPERATION 64 1 ❖ ❖ ❖ ❖ Metric vers ion ❖ ❖ ❖ ❖ Inch version ❒ The following tables l ist the combinations that c an be used in 2 one -sided ori gin als → 1 one-sided print of 4 ima.
Combine Originals—Co mbining Originals Into One P rint 65 1 ❖ ❖ ❖ ❖ Inch version ❒ If the proper reproduction ratio is not sele cted, images might not completely appear on prints. Reference When you use the optional document feeder with this function, see ⇒ P.
OPERATION 66 1 Note ❒ To have the machine choose a suitable ratio automatically, use Auto Mag- nification Selection mode. See ⇒ P.32 “Auto Magnificat ion Selection—Hav- ing The Machine Choose The Reproductio n Ratios ” . D Press the { { { { Combi ne } } } } key.
Combine Originals—Co mbining Originals Into One P rint 67 1 H The beeper sounds after the first original has been st ored. Set the second original face down. I Press the { { { { Star t } } } } key. J Check the image position of the trial or p roof print.
OPERATION 68 1 Auto Combine Mode—Having Images Repeated On One Print Preparation To use this func tion, you have to selec t Au to Combi ne mo de wit h the user tools.
Auto Combine Mode—Having Images Repeated On One P rint 69 1 E Select [ Repeat 2 ] or [ Rep eat 4 ] with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. F Press the [ OK ] key. G Press the { { { { Star t } } } } key.
OPERATION 70 1 Skip Feed Printing If the backs of prints ar e dirty, you can increas e the time between two prints using the { Skip Feed } key. By default, when one she et of paper is fed the drum rotates once. Ho wever, you can select the number of rotations of the dru m.
Skip Feed Printing 71 1 E Press the { { { { Star t } } } } key. F Check the image position of the trial or p roof print. Note ❒ If the image position is not cor- rect, adjust it using the [ Image = ] key (see ⇒ P.25 “Adjusting Print Ima ge Positio n” ).
OPERATION 72 1 Program—Storing Your Print Settings In Memory You can store up to 9 fre quently use d print job settings in machine memory and recall them for future use. Note ❒ The stored progr ams are not cleared when you turn off the main switch.
Program—Storing Your Print Settings In Memory 73 1 Recallin g A Pr ogram A Press the { { { { Program } } } } key. B Make sure that [ Recal l ] is selected. C Press the [ OK ] key. Note ❒ Programs that have been s tored beforehand are represen ted by a number.
OPERATION 74 1 D Select the program number you want to protect with the [ ← ← ← ← ] , [ → → → → ] , { ~ } , or { { { { } } } } } } } } key. Note ❒ You can also select the p rogram number with the Number keys. E Press the [ Select ] key.
Security Mode—Printing Secret Documents 75 1 Security Mode—Printing Secret Documents This function prevents othe rs from making prints of s ecret docum ents from the master. For exa mple, if you want to prin t some docum ents with sensitive information, use this func- tion after making your prints so that nobody can access that master again.
OPERATION 76 1 Quality Start Mode— Regaining The Image Density When The Ink On The Drum Dries If the machine is not used for a long peri od of ti me o r you change th e col or drum unit, the ink on the drum mi ght dry causing prin t quality to deterio- rate.
Job Separation—Separating Printing Sets On The Paper Delivery Tray 77 1 Job Separation—Separating Printing Sets On The Paper Delivery Tray The print on the top of eac h print set on the paper delivery tray is pulled by the job separator. T his function is useful when you make 2 or more prin t sets.
OPERATION 78 1 A Press the { { { { Job Separato r } } } } key. B Make y our prints. Note ❒ After the last page of each prin ting set is fed out to the paper d elivery tray, the job separator p ulls the last sheet of each group i n Job Separation mode.
Saving Master 79 1 Saving Master The machine automatical ly changes the master length dependin g on the paper size you u se. This save s both master and ink. a = Images on the master b = Masters c = Area that you can save master and ink Limita tion ❒ The optional document feeder is required.
OPERATION 80 1 On Line Printing The images on a personal computer can be printed u sing this machi ne. Limita tion ❒ The PC controller is required. For details, refer to the PC controller man ual. Note ❒ When you use A5, 5 1 / 2 " × 8 1 / 2 " K , or paper of non-standard size, you need to select the paper si ze with the [ Ppr.
81 2. OPTIONAL FUNCTIONS Printing Using The Optional Document Feeder Insert a stack of originals in the docu- ment feeder. It will be fed automati- call y. Origina ls Setting the following originals in the document feeder might cause origi- nal mi sfeed s or dama ge to the or igi- nals.
OPTIONAL FUNCTIONS 82 2 Basi cally , set origin als as shown be- low. When you have an optional memory board and the original is set in a dif- ferent direction from the print paper, the machine automa tically rotates the original image by 90 ° to match the print paper direc tion.
Printing Using The Optional Document Feeder 83 2 D Make y our prints. Note ❒ If the next original has bee n set in the document feeder before the m ach ine st ops , th at orig in al is fed automatically and a trial print is delivered to the paper delivery tray after the print of the first original is completed.
OPTIONAL FUNCTIONS 84 2 E Select [ Combine 2 ] or [ Quadruple ] with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. F Press the [ OK ] key. G Press the { { { { Star t } } } } key. H Check the image position of the trial or p roof print.
Printing Using The Optional Document Feeder 85 2 E Press the { { { { Enter } } } } key. F Enter the desired number of prints for the second original with the Number keys. G Press the { { { { Enter } } } } key. Note ❒ Repeat steps F and G for each ori gin al.
OPTIONAL FUNCTIONS 86 2 M Press the { { { { Print } } } } key. Program Clear Modes Auto Cycle Proof Print Enter Start Clear/Stop TPES070N.
Color Printing Usi ng The Opti onal Color Drum 87 2 Color Printing Using The Optional Color Drum Color dr um unit s (red, blue, green, and brown) are available as options in addition to the standard b lack unit. For making color prints, a separate drum unit is necessary for e ach color.
OPTIONAL FUNCTIONS 88 2 out the drum unit while h olding hand le B2 and dr um stay B 3. Important ❒ Be careful not to le t the drum unit fall. E Lower lock lever B1 of the option- al color drum. F Insert the color drum unit along the guide rail. G Slide in the drum u nit until it locks in position.
Color Printing Usi ng The Opti onal Color Drum 89 2 A Prepare the two originals. Set the first original on the exposure glass (contact glass) . B Enter the nu mber of print s wit h the Number keys. C Press the { { { { Star t } } } } key. D Check the image position of the trial or p roof print.
OPTIONAL FUNCTIONS 90 2 Changing The Drum Size To save costs o n master rolls and ink, you ca n shorten the len gth of each master by changing to an optional smaller drum. Printi ng Area (at 2 3 ° ° ° ° C/73 ° ° ° ° F, 65 % RH) ❖ ❖ ❖ ❖ Met ric vers io n ❖ ❖ ❖ ❖ Inch version Master Cu t Leng th A3 drum…320 mm × 530 mm, 12.
Image Rotation—Rotating Original Images 91 2 Image Rotation—Rotating Original Images When the direction in which your original is set is different from that of the pa- per, and your machine is equipped wi th the optional memory board, the ma- chine automatically rotates the original image by 90 ° to match the p aper dire ction.
OPTIONAL FUNCTIONS 92 2 ❒ It take s longe r than usual to make masters in Image Rota tion mode. ❒ You can cancel Image Rotation m ode with the user tools.
Make-up Printing Features 93 2 Make-up Printing Features Make-up mode enables you to do more than just make an exact copy of the orig- inal. A variety of editing and image process ing functions allow you to quickly and easily customize your pr ints. Limita tion ❒ The memory board option is required for this feature.
OPTIONAL FUNCTIONS 94 2 Make-up Modes For Outside Design ated Area s 5. P./N. mode (Positive Negat ive mode ) 6. Solid mode (Ima ge Pat- tern mode) 7. Al l Page Patt ern mode (Area Pattern mod e) 8. Al l + Outlin e (Image Outline a nd Area P at- tern mode) Mode Sam ple Undesi gnated Area Command sh eet/Origi nal P rint 1.
Make-up Printing Features 95 2 Note ❒ In Make-up mode, commands must be given for both designated areas and outside the de signated area. 3. Save Ar ea mode: The area outsi de the desig- nated a reas is delete d. 4. Ou tline mode: The ar ea outside the d esignated area is printed in Out- line mode.
OPTIONAL FUNCTIONS 96 2 Backgro und Pat terns There is a total of 164 background patterns for Make-up mode: • 40 basic patterns • 40 patterns similar to the basic patterns but with patterns elements at 4 times the si ze. •9 0 ° rotations of all the basic and enlar ged patterns.
Make-up Printing Features 97 2 Note ❒ The basic patterns are numbered 1 to 40. ❒ You can make your own make-u p backgroun d patter ns with th e user too ls.
OPTIONAL FUNCTIONS 98 2 Making A Command Sheet For Make-Up Printing Command sheets are fed firs t so that the machine can recognize the areas of the original which are to be edited as designated are as. Command sh eet The command sheet is a shee t of pa- per for designating areas to be edited.
Making A Command Sheet For Make-Up Printing 99 2 How To Make A Command Sheet There are two ways of designating areas: the diagonal line method and the closed area method. - - - - Features • You can combine up to 4 command sheets when making a master .
OPTIONAL FUNCTIONS 100 2 - - - - Notes about drawing a command sheet The image might differ depending on how the designated area is drawn, so re- member the following when making the command s heet: Designat ed area Area recogniz ed Preferred designated area Part of t he designated area is surrounded by 3 sides of the entir e area.
Making A Command Sheet For Make-Up Printing 101 2 When using the diagonal line me thod Note ❒ A diagonal line must be drawn through the area that you wish to edit. A Put the command sheet on top of the original. B Draw a line using a felt tip pen (black, red or blue) with a thickness of at least 1 mm.
OPTIONAL FUNCTIONS 102 2 a, b, c = 2 mm, 0.08" When using the closed area method Note ❒ The line designa ting the area must be a clos ed loop. A Put the command sheet on top of the original. B Using a bl ack, red, or blue fel t tip pen, draw a li ne around the area to des- ignate.
Making A Command Sheet For Make-Up Printing 103 2 a = Line marking the de signated area b = 2 mm, 0.08" c = Image within the des ignated area ❒ The line marking the designated area should be more than 2 mm, 0.08", from any neighboring image.
OPTIONAL FUNCTIONS 104 2 Command She ets And Finis hed Print s The following illu strations will help you unde rstand how to draw a command sheet . ❖ ❖ ❖ ❖ When drawing a command sheet using a diagonal li ne The diagonal line method is easy to use for designating rectangular areas.
Make-up Printing 105 2 Make-up Printing A Press the { { { { Make -Up } } } } key. B Make sure that [1] is selected. Then press the [ OK ] key. C Select the frame shape with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
OPTIONAL FUNCTIONS 106 2 ❒ To change the value entered, press the { Clear /Stop } key and enter the new value. J After you h ave finished des ignat- ing modes for all the command shee ts, select [ Outside Area ] with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Make-up Printing With The Optional Document Feeder 107 2 Make-up Printing With The Optional Document Fe eder Under the following conditions, you should set command sheets and the original on the exposure glas s (con- tact glass). • W hen using paste-up orig inals.
OPTIONAL FUNCTIONS 108 2 E Select the mode for the first com- mand sheet with the [ ← ← ← ← ] , [ → → → → ] , { ~ } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key.
Make-up Printing With The Optional Document Feeder 109 2 density with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
OPTIONAL FUNCTIONS 110 2 Make-up Samples - - - - Sample 1 A Command Sheet No. 1, Frame shape , Designated area: Delete Area mode B Outside area: Letter mode C Print 1.
Make-up Samples 111 2 - - - - Sample 2 A Command Sheet No. 1, Frame shape/, Designated area: All + Outline No. 30 B Command Sheet No. 2 Frame shape , Designated area: All page pattern No. 17 C Outside area: Fn1 D Print 1. Original 2. Command sheet No .
OPTIONAL FUNCTIONS 112 2 - - - - Sample 3 A Print the original as it is B Change the drum unit for color pr inting C Command Sheet No. 1, Frame shape , Designated ar ea: All page pattern No. 3 9 D Outside area: Letter mode E Print 1. Original 2. Command sheet No .
Image Overlay—Merging Images 113 2 Image Overlay—Merging Images The machine can merge two diff erent originals onto the same print pap er. Two types of merging are available: ❖ ❖ ❖ ❖ Overla y Two different originals are merged onto the same print paper.
OPTIONAL FUNCTIONS 114 2 Sett ing ori ginal s on the exp osur e glass (contact g lass) A Set the first original on the ex- posur e glass (contact gla ss) . B Press the { { { { Sta rt } } } } key. Note ❒ When you sele ct [ Form ] in step B , the original for the template should be se t first.
Stamping Date—Having The Date Stamped On Your Prints 115 2 Stamping Date—Having The Date Stamped On Your Prints You can print th e date on your prints. Preparation Before you use t his function, you have to set th e machine's internal clock wit h the user too ls.
OPTIONAL FUNCTIONS 116 2 B Make su re t hat [ Date ] is selected. C Press the [ OK ] key. D Select t he desir ed Stampin g Date position and direction with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Page Stamping—Having Page Numbers Stamped On Your Prints 117 2 Page Stamping—Having Page Numbers Stamped On Your Prints You can print page numbers on your prints . Three numbering formats are avail- able: • P 1, P2,....., P5 • 1/5, 2/5,....., 5/5 • -1-, -2-,.
OPTIONAL FUNCTIONS 118 2 B Select the [ Page ] with the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Select the desir ed format with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Page Stamping—Having Page Numbers Stamped On Your Prints 119 2 F Select the desired orientation with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. G Press the [ OK ] key. H Select the [ Yes ] or [ No ] key.
OPTIONAL FUNCTIONS 120 2 Stamping Function—Printing Preset Messages On Your Prints One of the following 3 messages can be stamped on prints. Confidential Priority Preliminary Limita tion ❒ The option al memory board is re- quired. ❒ This function cannot be used with User Stamping.
Stamping Function—Printing Preset Messages On Your Prints 121 2 F Select the page to be stamped with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
OPTIONAL FUNCTIONS 122 2 User Stamping—Printing Your Own Messages On Your Prints Up to 4 me ssages whic h you use fre- quently can be stored in the machine memory. You can have these messag- es stamped on your prints . Preparation You have to store your message with the us er tools.
User Stamping—Printing Your Own Messages On Your Prints 123 2 F Select the page to be stamped with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
OPTIONAL FUNCTIONS 124 2 Memory Combine—Combining Originals Into One Print With The Memory Board You can combine originals in four ways: ❖ ❖ ❖ ❖ 4 One-side d Originals → → → → 1 One-s ided Print Of 4 Images 4 one-sided pages are printed onto 1 one-sided sheet, 4 original images on one side.
Memory Combine—Combining Originals Into One Print With The Memory Board 125 2 Combine 4, 8, or 1 6 Origina ls – 4 , 8, or 16 One-si ded Origi nals → → → → 1 One-sided Pri nt Of 4, 8, or 16.
OPTIONAL FUNCTIONS 126 2 ❒ If the calculated ratio is under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts of the im- age might not be copied. ❒ The machine cannot c opy originals different in s ize and direction.
Memory Combine—Combining Originals Into One Print With The Memory Board 127 2 ❖ ❖ ❖ ❖ When you s et orig inals on th e exp osure glas s (cont act glass) (M etric version ) *1 You can use these original and pap er sizes in Combine 4 , 8 Originals mod e.
OPTIONAL FUNCTIONS 128 2 C Press the [ OK ] key. D Select one of the des ired comb ine mode s. E Press the [ OK ] key. F Set your origin als. Setting your o riginal ( K ) on the exposure glas s (cont act glass) A Set your origin al as shown in the illustration.
Memory Combine—Combining Originals Into One Print With The Memory Board 129 2 Note ❒ Even if the number of originals is less than the number required in the se- lected mode, prints can be made, as s hown in the illus tration. In this case, press the { Ente r } key after all the originals have been scanne d.
OPTIONAL FUNCTIONS 130 2 ❒ The original and paper setting dir ection and the number of repeated images are as follows: ❖ ❖ ❖ ❖ For example, when you use A4 L L L L originals and A3 L L L L paper. ❖ ❖ ❖ ❖ Fo r e xam ple, when y ou se t A5 L L L L originals in the optional document feeder and you use A3 L L L L pap e r .
Memory Combine—Combining Originals Into One Print With The Memory Board 131 2 A Press the { { { { Combi ne } } } } key. B Select [ Memory C ombine ] with the [ ← ← ← ← ] or { { { { ~ ~ ~ ~ } } } } key. C Press the [ OK ] key. D Select [ Rep eat ] with the [ ← ← ← ← ] or { { { { ~ ~ ~ ~ } } } } key.
OPTIONAL FUNCTIONS 132 2 Setting your o riginal ( K ) on the exposure glas s (cont act glass) A Set your origin al as shown in the illustration. Setting yo ur orig inals ( K ) in th e opt i o nal do cumen t feed er A Set your origin als as shown in the illustration.
133 3. USER TOOLS Accessing The Us er Tools This section is for the key operators in charge of this machine. You can change or set the machine' s default setting s. A Press the { { { { User Tools } } } } key. B Select the desir ed user to ols menu.
USER TOOLS 134 3 pressing the [ OK ] ke y. The n en- ter the new value. ❒ [ Cancel ] : Press to return to the previous menu wi thout chang- ing any data.
User Tools Menu 135 3 User Tools Menu Reference For how to access the user tools, see ⇒ P.133 “Accessing The User Tool s” . 1. Sy stem No. Mode Descriptio n 1 A uto Rese t The m achi ne retu rns to its in itial condi tion automa tica lly after your job is finished.
USER TOOLS 136 3 2. Set Operat ion Mo des 8 Time Setting Use to set the mach ine's internal clo ck. Note ❒ The cloc k must be adjuste d if you chang e the clock t o dayligh t saving ti me/summer time, or r eturn to s tan- dard ti me. Reference For h ow to set the c lock , see ⇒ P.
User Tools Menu 137 3 3. Init ial Se ttin g 3 Cop y Count Displ ay The counter can be set to show th e number of prints made (Up), or the number o f print s remaining to be made (Down). Note ❒ Default : Down 5 Panel B eeper Turns the beeper on or off.
USER TOOLS 138 3 4 Reproduction Ratio Adjust a fixed reprod uction ratio bet ween 50 and 200 %. Note ❒ Default: • Metric versio n: 71 %, 82 %, 87 % , 93 %, 10 0 %, 115 %, 122 %, 141 % • Inch version: 65 %, 74 %, 77 %, 93 %, 100 %, 121 %, 129 %, 155 % Reference For ho w to set the ra tios, s ee ⇒ P.
User Tools Menu 139 3 4. Mo de Set ting 9 Margin Eras e Area Adjust th e erase edges marg in. Note ❒ Default : 2 mm, 0.1" Reference For how to ad just the erase ed ges area, see ⇒ P.1 50 “3-9 Margin Erase Area” . 10 Pp r. S ize [On - line ] Specifies th e paper size w hen you press the { On Line } key.
USER TOOLS 140 3 6 B ackground ON/OFF When you make prints in Photo, Letter/Photo , or Tint mode, the backgr ound of the print s might become d irty. Turn Backgr ound On to improv e the clarity of your print s. Note ❒ Default: w/o back. correction (off) 7 Longer Paper You can select wheth er you can use paper l onger than 432 mm, 17.
User Tools Menu 141 3 10 Cancel Comb. Specifie s whether Combine Original s or Memor y Combine mod e is clea red af ter finishi ng yo ur prin t job. Note ❒ Default: Not to cancel 11 No. of Sk ip Feed Specifie s the number of drum rotations i n Skip Feed mode at power on.
USER TOOLS 142 3 15 Deflect or Angle You can chang e the angl e of t he wing gu ide depe nding on the paper t ype you use. Note ❒ Default: Auto ❒ Available set tings: • Up (Select this se tting when standa rd thickness or thin paper misfeeds at the pa per exit sect ion occur frequently.
User Tools Menu 143 3 18 In k/M as ter Left Specifies whether you can check the amount of ink and mas ter . Note ❒ Default: OFF ❒ Available set tings: • OFF (You c annot check t he remaining amount of i nk or master.
USER TOOLS 144 3 5. Stamp Note ❒ You can use these fun ctions only when you have an optional memory board. No. Mo de Description 1 Type You can change t he message selected at p ower on in th e Stamping func tion. Note ❒ Default: Confi dential 2 Size You can edit the pr eset stamp sizes.
User Tools Menu 145 3 6 Density (User) You can sel ect the styl e of the user stamps. Note ❒ Defau lt: S olid-fi ll 7 Position (User) You can edit the pr eset user stamp po sition co-ord inates. Note ❒ Default: See ⇒ P. 156 “5-7 Position (User)” .
USER TOOLS 146 3 6. Se t User C ode (s) 13 Direction (Pa ge) You can selec t the page number ing direc tion at power on i n Page Stampi ng mode. Note ❒ Default : • W hen you select [P1, P2] or [ 1.
User Tools Menu 147 3 2 Reset Counters You can clea r each or al l user codes' cou nters. Note ❒ Default: Single Reference For how to clea r the number of masters and copi es, see ⇒ P.163 “6-2 Reset Counters ” . 3 Reg. User Code Y ou can reg ister user codes.
USER TOOLS 148 3 User Tool Menus In Detail 1-8 Time Setting A Press the { { { { User Tools } } } } key. B Make sure that 1 is selected. Then press the [ OK ] key. C Enter 8 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key. D Enter the year with the Number keys.
User Tool Menus In Detail 149 3 C Enter 4 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key. D Select the ratio you want to adjust with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
USER TOOLS 150 3 G Enter the number of students with the Number keys. Then press the { { { { Enter } } } } key. Note ❒ Repeat steps F and G until you have finished regi stering num- ber of students in each c lass.
User Tool Menus In Detail 151 3 Note ❒ You can also enter the ratio with the Num ber keys and the { Ente r } key. If you selecte d * A Enter the erase edge marg in with the Number keys. B Press the { { { { Ente r } } } } key. C Enter the vertical length of pa- per you use with the N umber keys.
USER TOOLS 152 3 4-14 No. of Q.s tar t Note ❒ The default settings ar e as follows: A Press the { { { { User Tools } } } } key. B Enter 4 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key. C Enter 14 with the Number keys. Then press the [ OK ] or { { { { Ente r } } } } key.
User Tool Menus In Detail 153 3 D Select the temperature at which you u se this machine with the [ ← ← ← ← ] , [ → → → → ] , { ~ } , or { { { { } } } } } } } } key.
USER TOOLS 154 3 4-19 Type of Pape r A Press the { { { { User Tools } } } } key. B Enter 4 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key.
User Tool Menus In Detail 155 3 A Press the { { { { User Tools } } } } key. B Enter 5 with the Numb er keys. Then press the [ OK ] or { { { { Ente r } } } } key.
USER TOOLS 156 3 F Adjust th e horizontal stam p posi- tion with the Number keys. G Press the { { { { Enter } } } } key. H Adjust the vertical stamp position with the Number keys.
User Tool Menus In Detail 157 3 A Press the { { { { User Tools } } } } key. B Enter 5 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key.
USER TOOLS 158 3 5-8 R egist. (User) A Press the { { { { User Tools } } } } key. B Enter 5 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key.
User Tool Menus In Detail 159 3 A Press the { { { { User Tools } } } } key. B Enter 5 with the Numb er keys. Then press the [ OK ] or { { { { Ente r } } } } key.
USER TOOLS 160 3 G Press the { { { { Enter } } } } key. H Adjust the vertical date stamping positio n with the Nu mber ke ys. I Press the { { { { Enter } } } } key.
User Tool Menus In Detail 161 3 D Select the page numbering d irec- tion you want to adjust with the [ ← ← ← ← ] , [ → → → → ] , { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key. E Press the [ Change ] key. F Adjust the horizontal page nu m- bering position with the Number keys.
USER TOOLS 162 3 F Move the cursor to the position you wish to edit with the { { { { ~ ~ ~ ~ } } } } , { } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key. G Press the { { { { Ente r } } } } or { { { { Clear/St op } } } } key to edit the pattern.
User Tool Menus In Detail 163 3 6-2 R eset Count ers A Press the { { { { User Tools } } } } key. B Enter 6 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key. C Enter 2 with the Number keys. Then press the [ OK ] or { { { { Enter } } } } key.
USER TOOLS 164 3 D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display you r user co de. E Press the [ OK ] key. F Enter the new user code with the Number keys . G Press the [ OK ] key. 6-5 D el. User Code A Press the { { { { User Tools } } } } key.
165 4. What To Do If Something Goes Wrong If Your Machine Does Not Operate As You Want If a malfunction or a misfeed occurs within the machine, the following messages will appear on the panel display. Message M eaning Drum u nit is not s et. Set Drum uni t.
What To Do If Something Goes Wrong 166 4 - - - - When a service call message is displayed in the panel display Press the [ Exi t ] key. Then turn the main switch off and on.
If You Cannot Make Prints As You Want 167 4 If You Cannot Make Prints As You Want Combine Origi nal s Mode Problem Cause Action Misfeeds occur fre quently. Improper paper typ e is se- lected with the [ Ppr. Type ] key. Select pr oper paper type. See ⇒ P.
What To Do If Something Goes Wrong 168 4 x Clearing Misfeeds R CAUTION: Note ❒ After clearing the misfeeds, make sure that all the doors, covers, and units are close d and th e x indica- tor is off. ❒ To prevent misfeeds, do not leave any torn scraps of pap er, originals, or ma ste rs in the ma chi ne.
x Clearing Misfeeds 169 4 • W hen paper edges stic k together or paper is not fed to the machine, shuffle the paper as shown. • When you use po stcar ds or th ick paper, lower the p rinting speed to setting 1 or 2. See ⇒ P.28 “Chang- ing The Printing Speed” .
What To Do If Something Goes Wrong 170 4 F Set the drum unit and close the front door . - - - - To prevent paper misfeeds: See ⇒ P.168 “” x + A” Paper Mi sfeed In The Paper Fe ed Section” . ” x x x x + B” Paper Or Master Wrapped Ar ound Th e Drum When The Master Is Wrapped Around The Drum A Open the fr ont door.
x Clearing Misfeeds 171 4 C Take out the drum . Note ❒ For how to take out the d rum unit, see ⇒ P.87 “Changing The Colo r Drum Unit” . D Remove the misfed paper fr om the drum. E If you cann ot find misfed paper in step D D D D , remove mis fed paper from the pressure cylinder.
What To Do If Something Goes Wrong 172 4 - - - - To prevent paper misfeeds: If the paper is curled or the original's leading edge margin is too narrow, the following action is necessar y. • W hen you use cu rled paper, cor- rect the curl as shown.
x Clearing Misfeeds 173 4 ” x x x x + D” Master Mi sfeed I n The Master Feed Sec tion A Pull out the master feed unit until it stop s. B Open the maste r guide. C Open the master fee d unit cover (1). D Remove the master roll (2). E Reset the master roll (1).
What To Do If Something Goes Wrong 174 4 C Take out the drum . D Pull out the misfed master from the inside. E Set the drum unit and close the front door . ” x x x x + B + E” Master Misfe ed in The Master Ejec t Section A Open the fr ont door. B Lower dr um unit lock lever B 1.
x Clearing Misfeeds 175 4 G Pull out lever E3 a nd remove the misfed master. H Return lever E3 and the master eject unit to their original po si- tion. I Set the drum unit and close the front door . ” x x x x + E” Maste r Misfeed In T he Master Ej ect Sect ion A Open the fr ont door.
What To Do If Something Goes Wrong 176 4 D Pull the green knob towards you and remove the misfed original. E Return the document feed sheet to its original position. F Close the ADF cov er until it clicks in position and if necessary, close the document feeder.
When The Open Cover/Unit Indicator ( M ) Lights 177 4 When The Open Cover/Unit Indicator ( M ) Lights M Make sure that the following door/ cover are closed. ❖ ❖ ❖ ❖ Front Door Close the front d oor completely. ❖ ❖ ❖ ❖ Document Feeder Cover (Option) Close the document feeder cover until it locks in position.
What To Do If Something Goes Wrong 178 4 When The Add Ink Indicator ( j ) Lights The Add Ink indic ator ( j ) li ghts when it is time to supply ink. R CAUTION: R CAUTION: R CAUTION: R CAUTION: Note ❒ Ink is re adily removed from skin by waterles s hand cleaners followed by washing with s oap and water.
When The Add Ink Indicator ( j ) Lights 179 4 C Remove the used in k cartridg e. D Remove the cap of the new ink cartridge. E Insert the new cartridge into the ink holder. Note ❒ Always sup ply ink of t he same co lor. F Return the ink holder to its original position until it clicks.
What To Do If Something Goes Wrong 180 4 When The Master End Indicator ( C ) Lights The M aster End indic ator ( C ) lights when i t is time to replace the master roll or when you need to set the master roll. R CAUTION: A Pull out the master feed unit until it stops.
When The Master End Indicator ( C ) Lights 181 4 G Insert the paper ed ge of the master roll as shown in the illustration until th e master edge reaches the arrow mark.
What To Do If Something Goes Wrong 182 4 When The Master Eject Indicator ( k ) Lights The Mas ter Eject indica tor ( k ) lights when it is time to empty the master eject unit or when you need to set the master eject unit. Note ❒ Ink is readily removed from skin by waterless hand cle aners fol- lowed by washing w ith soap and water.
When Other Indicators Are Lit 183 4 When Other I ndicators Are Lit Indicat or Meaning and actio n The k ey cou nter (o ptio n) is n ot set . Insert the ke y co unter. • (Metri c versi on) • (Inch version) Colo r drum unit is insta lled. • (Metri c versi on) • (Inch versi on) A3/11" × 17" dr um unit is set.
What To Do If Something Goes Wrong 184 4 When The Prints Are Not Delivered In A Neat Stack If you use small size p aper, pri nts might not be delivered in a neat s tack. In this case, follow the steps bel ow. A Lower the end p late a little. While holding the en d plate, lift the an- gle adjustment s crew.
Poor Printing 185 4 Poor Printing Dirty B ackgroun d If the background of pr ints is dirty, the dru m unit is dirty. R CAUTION: R CAUTION: R CAUTION: Note ❒ When you use paper s maller than the original image, select the proper reduc- tion ratio. Otherwis e, you might get d irty background prints.
What To Do If Something Goes Wrong 186 4 B Pull out the drum u nit. Note ❒ For how to take out the drum unit, see ⇒ P.87 “Changing The Color Drum Unit” . C While pressing the drum lock, turn the drum until you can see the trailing edge of the master.
Poor Printing 187 4 E Insert the drum unit until it locks in position, then l ower the drum un it lock lever. F Close the front door. G Turn on the main switch.
What To Do If Something Goes Wrong 188 4 Black Line/ Sta in Check the pla ten cover an d clean it if dirty. See ⇒ P.196 “Platen Cover” . Check th e exposure glass (cont act glass) and clean it if dirty. See ⇒ P.196 “Exposure glass (contact glass) ” .
189 5. REMAR KS Operation Notes General C aution s • W hile printing, do not turn off the main switch. • W hile printing, do not op en the door or covers. • W hile printing, do not unp lug the power cord. • W hile printing, do not move the machine.
REM ARK S 190 5 • When making duplex prints or wh en usin g non-whi te pr inting paper , the pa- per end sensor might malfun ction and fail to detect the paper. In this case, place a blank shee t under the printing paper on the paper fe ed tray. • T he outer portion of the image might no t be printed under low temperature.
Operation Notes 191 5 • W hen you use originals with l ight lettering, edges of the letters might be printed cl early and the inside of the letters might be light. In this case, in- crease the i mage density. • W hen you use originals of fine l etters, letters on prints might be skipped.
REM ARK S 192 5 PC Controll er Important ❒ Make sure that m indicator on the PC controller operation pa nel is off before unplugging the power cord..
Where To Put Your Machine 193 5 Where To Put Your Machin e Your machine's l ocation should be careful ly chosen because environmental con- ditions greatly affect its pe rformance.
REM ARK S 194 5 • L ocations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes might cause c ondensation with- in the machine.) • Places where the machine might be subjected to freq uent strong vibration.
Where To Put Your Machine 195 5 ❖ ❖ ❖ ❖ Main Frame 1. More than 10 cm, 4.0" 2. More than 60 cm, 23.7" 3. More than 60 cm, 23.7" 4.
REM ARK S 196 5 Maintaining Your Machine To maintain high print quality, cl ean the following parts and units regular- ly. Important ❒ Do not use benzine, thinner, or other organic liquids. Otherwise, this machine might be damaged. Main Frame Expos ure gl ass ( contac t g lass) A Lift the platen cover o r docum ent feeder.
Maintaining Your Machine 197 5 Optional Document Feeder Sheet A Lift the do cument feed er. B Clean the sheet wi th a damp c loth and wipe it with a dry cloth.
REM ARK S 198 5 Combination Chart This combination chart sh ows which modes can be us ed together. ✩ means that t hese modes can be used togeth er. -- means that t hese modes cannot be used tog ether. *1 means that t hese modes cannot be used tog ether.
Combination Chart 199 5 Function specif ied earli er Memor y Combine mo de (4 Ori gin a ls) ✩✩✩✩✩✩ ✩✩ *1 *1 -- *1 *1 ✩✩✩✩✩✩ *2 *2 *2 *2 *2 * 2 *1 *2 ✩ *1 Memor y Combine .
REM ARK S 200 5 This page is intentionall y blank..
201 6. SPECIFICATIONS Main Frame ❖ ❖ ❖ ❖ Configuration: Desk top ❖ ❖ ❖ ❖ Printing Proces s: Full automatic on e drum system ❖ ❖ ❖ ❖ Original Type: Sheet/Book ❖ ❖ ❖ ❖ Original Si ze: Maxi mum 3 04. 8 mm × 432 mm, 12.0" × 17.
SPEC IFIC ATIONS 202 6 From 50 % to 200 % in 1 % steps ❖ ❖ ❖ ❖ Printing Area: • A 3 drum: • Inch version: More than 290 × 419 mm, 11.4" × 16.4" • Metric version: More than 290 mm × 409 mm, 11.4" × 16.1" • A 4 drum: More than 290 mm × 200 mm, 11.
Main Frame 203 6 ❖ ❖ ❖ ❖ Master Eject Unit C apacit y: •A 3 d r u m More than 60 masters •A 4 d r u m 90 masters ❖ ❖ ❖ ❖ Dimensions (W × × × × D × × × × H): ❖ ❖ ❖ ❖.
SPEC IFIC ATIONS 204 6 ❖ ❖ ❖ ❖ Noise Emissio n: Sound power level: The measu rements are made according to ISO 7779. ❖ ❖ ❖ ❖ Power Source: See the inside front cover of this manual. ❖ ❖ ❖ ❖ Power Consumption: •M a s t e r M a k i n g : Less than 0.
Document Feeder 205 6 Document Fe eder ❖ ❖ ❖ ❖ Original Type: Sheet ❖ ❖ ❖ ❖ Original Weight: 40.7 g/m 2 to 127.9 g/m 2 , 10.8 lb to 34 lb ❖ ❖ ❖ ❖ Original Si ze: Max. 297 mm × 864 mm , 11.6" × 33.8" Min. 105 mm × 128 mm, 4.
SPEC IFIC ATIONS 206 6 Consumables Note ❒ Specifications are s ubject to change without notice. Name Size Remarks Master: Length: 110 m, 410 ft/r oll Width: 420 mm, 16 .
207 INDEX 16 One-si ded Original s → 1 One-sided Print Of 16 Images , 124 1 One-sided Originals → 1 One-sided Prin t Of 2 I mage s , 68 1 One-sided Originals → 1 One-sided Prin t Of 4 I mage s ,.
208 E Econom y Mode , 48 { Econom y Mode } key , 6 Edge Erase , 40 { Edge Er ase } key , 6 { Enter } key , 7 Envelopes , 43 Environme ntal C onditi ons , 193 Erasing Edge Margins , 40 Exit , 9 Exposur.
209 Monito rs , 8 MSTR Makg. Dens ity , 137 N Next , 9 No. of Q.start , 141 , 152 No. of Skip Feed , 141 , 15 1 No Orig. Size , 139 No Orig. Size (A DF) , 139 Num ber k eys , 7 O OK , 9 Ppr.
210 S Safety Infor mation , i Saving Ink , 48 Saving Master , 79 { Security } key , 6 Security Mode , 75 Select , 9 Separati ng Printi ng Sets , 77 service call , 166 Set Operat ion Modes , 136 Setting Q .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Savin 3350DNP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Savin 3350DNP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Savin 3350DNP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Savin 3350DNP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Savin 3350DNP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Savin 3350DNP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Savin 3350DNP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Savin 3350DNP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
