Manuel d'utilisation / d'entretien du produit 500 du fabricant Samsung
Aller à la page of 37
SRP-500 SRP-500.
EMC and Safety standards Applied Product Name : SRP-500 The following standards are applied only to the printers that are so labeled. Europe : CE marking, TUV/GS : EN60950 ; 1999 North America : EMI : FCC Class A Safety standards : UL / C-UL : UL60950-3rd.
T able of contents Introduction 1 Chapter 1. Setting up the printer 1-1. Unpacking 3 1-2. Choosing a place for the printer 4 1-3. Connecting the cables 5 1-4. Installing or replacing the paper roll 7 1-5. Installing new ink cartridge(s) 9 1-6. Using the control panel 11 1-7.
2 1 Introduction Front view Rear view Front cover Rear cover Open button Control pannel Power switch Drawer kick-out connector Interface connector Power connector The SRP-500 is high-quality inkjet POS printer that can print on roll paper. This is compact, light-weight and highly reliable one-station printer and has the following features.
4 3 Setting up the printer Chapter 1 1-1. Unpacking 1-2. Choosing a place for the printer SRP-500 AC adapter Power code Paper roll Operator’s manual Ink cartridges Cable cover Your printer box should include the item shown in the illustration below.
6 5 Setting up the printer Chapter 1 1-3. Connecting the cables Plugging in AC adapter Connect the AC adapter according to the following procedure. 1) Make sure the printer is turned off. 2) Plug the AC adapter cable into the printer’s power connector.
8 7 Setting up the printer Chapter 1 1-4. Installing or replacing paper roll Notice the caution label and do not touch the auto cutter blade when you open rear cover. CAUTION 1) To prevent data loss, make sure that the printer is not receiving data. 2) Open the rear cover by pressing the open button and push the arrow mark back.
Setting up the printer Chapter 1 10 9 1-5. Installing new Ink cartridge(s) 1) Remove new ink cartridge from sealed pouch. (Hold cartridge by round plastic avoid contamination) 5) Take out old ink cartridge(s). Place new cartridge(s) into carriage. Hold plastic tab to ensure clean installation.
Setting up the printer Chapter 1 12 11 1-6. Using the control panel Control panel Power (LED) Most of the functions of this printer are governed by software, but you can monitor the printer’s status by looking at the lights on the control panel and for some procedures you will use the buttons.
14 13 1-7. Self test The self test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version, and DIP switch settings. The test is independent of any other equipment or software, so it is a good idea to run it when you first set up the printer or if you have any trouble.
2-2. The printer stops printing. If the Error light is on (but not blinking), the printer is off line. Check to see that the covers are closed and check the paper state. See Chapter 1 for instructions on installing or replacing the paper roll. If the Error light is blinking, there is an error.
2-5. Y ou want to check a software program. T roubleshooting Chapter 2 17 Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer.
20 DIP switch settings Chapter 3 19 3-2. Changing the DIP switch setting The following page show the character code tables. To fine the character corresponding to a hexadecimal number, count across the top of the table for the left digit and count down the left column of the table right digit.
22 21 Code table Chapter 4 Page 2 (PC850 : Multilingual) Page 3 (PC860 : Portuguese).
24 23 Code table Chapter 4 Page 4 (PC 863 : Canadian - French) Page 5 (PC 865 : Nordic).
26 25 Code table Chapter 4 page 17 (PC 866 : Russian) page 16 (CP1252 : WinLatin1).
28 27 Code table Chapter 4 page 18 (CP 852 : DosLatin2) Page 19 (PC 858 : Euro).
30 29 Code table Chapter 4 Page 21 (MS-DOS 862 : Israel) Page 22 (MS-DOS 864 : Arabic).
31 Code table Chapter 4 Page 23 (MS-DOS 874 :Thai) Control commands list Chapter 5 5-1. Commands 5.1.1 Commands list for SRP-500 Series. (EPSON TM-U200 Mode) n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1.
34 33 Control commands list Chapter 5 5.1.2 Commands list for SRP-500 Series. (STAR Mode) n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Command BEL FF CR .
36 35 Control commands list Chapter 5 5-3. Command descriptions HT [Name] Horizontal tab [Format] ASCII HT Hex 09 Decimal 10 [Description] Moves the print position to the next horizontal tab position. [Notes] This command is ignored unless the next horizontal tab position has been set.
38 37 Control commands list Chapter 5 Bit 0 1 2 3 4 5 6 7 n = 1 : Printer status Off/On Off On Off On Off On On Off Off Off Hex 00 02 00 04 00 08 10 00 00 00 Decimal 0 2 0 4 0 8 16 0 0 0 Function Not used. Fixed to Off. Not used. Fixed to On. Drawer kick-out signal is LOW (connector pin 3) Drawer kick-out signal is HIGH (connector pin 3) On-line.
40 39 Control commands list Chapter 5 DLE ENQ n [Name] Real-time request to printer [Format] ASCII DLE ENQ n Hex 10 05 n Decimal 16 5 n [Range] n = 0, n = 2 [Description] The printer responds to a request from the host specified by n. n = 0: Recovers to on-line state.
42 41 Control commands list Chapter 5 ESC % n [Name] Select/cancel user-defined character set [Format] ASCII ESC % n Hex 1B 25 n Decimal 27 37 n [Range] 0 ≤ n ≤ 255 [Description] Selects or cancels the user-defined character set.
44 43 ESC * m nL nH d1...dk [Name] Select bit-image mode [Format] ASCII ESC * m nL nH d1...dk Hex 1B 2A m nL nH d1...dk Decimal 27 42 m nL nH d1...dk [Range] m = 0, 1 0 ≤ nL ≤ 255 0 ≤ nH ≤ 3 0.
46 45 ESC 3 n [Name] Set line spacing [Format] ASCII ESC 3 n Hex 1B 33 n Decimal 27 51 n [Range] 0 ≤ d ≤ 255 [Description] Sets the line spacing to [ n x (1/192)] inches.
48 47 ESC D n1... nk NUL [Name] Set horizontal tab positions [Format] ASCII ESC D n1...nk NUL Hex 1B 44 n1...nk 00 Decimal 27 68 n1...nk 0 [Range] 1 ≤ d ≤ 255 0 ≤ k ≤ 32 [Description] Sets horizontal tab positions. n specifies the column number (counted from the beginning of the line) for setting a horizontal tab position.
50 49 ESC G n [Name] Turn double-strike mode on/off [Format] ASCII ESC G n Hex 1B 47 n Decimal 27 71 n [Range] 0 ≤ n ≤ 255 [Description] Turns double-strike mode on or off. When the LSB of n is 0, double-strike mode is turned off. When the LSB of n is 1, double-strike mode is turned on.
52 51 ESC a n [Name] Select justification [Format] ASCII ESC a n Hex 1B 61 n Decimal 27 97 n [Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 [Description] Aligns all the data in one line to the specified position. n selects the type of justification as follows: [Notes] The command is enabled only when input at the beginning of the line.
54 53 Control commands list Chapter 5 ESC c 4 n [Name] Select paper sensor(s)to stop printing [Format] ASCll ESC c 4 n Hex 18 63 34 n Decimal 27 99 52 n [Range] 0 ≤ n ≤ 255 [Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected, using n as follows : [Notes] The printer goes off-line after printing stops.
56 55 Control commands list Chapter 5 ESC m [Name] Execute partial cut [Format] ASCII ESC m Hex 1B 6D Decimal 27 109 [Description] Execute partial cut with one point uncut ESC p m t1 t2 [Name] Generat.
58 57 Control commands list Chapter 5 ESC { n [Name] Turns on/off upside-down printing mode [Format] ASCII ESC { n Hex 1B 7B n Decimal 27 123 n [Range] 0 ≤ n ≤ 255 [Description] Turns upside-down printing mode on or off. When the LSB of n is 0, upside-down printing mode is turned off.
60 59 Control commands list Chapter 5 GS a n [Name] Enable/Disable Automatic Status Back [Format] ASCII GS a n Hex 1D 61 n Decimal 29 97 n [Range] 0 ≤ n ≤ 255 [Description] Enables or disables ASB and specifies the status items to include, using n as follows: 1 GS V m 2 GS V m n [Name] Feeds paper for cutting position.
62 61 Control commands list Chapter 5 First byte (printer information) Bit 0 1 2 3 4 5 6 7 Off/On Off Off Off On Off On On Off Off On Off Hex 00 00 00 04 00 08 10 00 00 40 00 Decimal 0 0 0 4 0 8 16 0 0 64 0 Function Not used. Fixed to Off. Not used. Fixed to Off.
64 63 Control commands list Chapter 5 GS r n [Name] Transmit status [Format] ASCII GS r n Hex 1D 72 n Decimal 29 114 n [Range] 1 ≤ n ≤ 2, 49 ≤ n ≤ 50 [Description] Transmits the status specified by n as, follows: Paper sensor status (n = 1, 49) [Notes] This command is executed when the data in the receive buffer is developed.
Reference information Chapter 6 66 65 6-6. Environmental condition Operating Storage Shipping Relative Humidity 10 ˚ to 40 ˚ C -10 ˚ to 60 ˚ C -40 ˚ to 70 ˚ C Operating : 10 to 90% RH (non-condensing) Storage : 10 to 90% RH (non-condensing) Shipping : 5 to 90% RH (non-condensing) 6-5.
Memo.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung 500 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung 500 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung 500, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung 500 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung 500, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung 500.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung 500. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung 500 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
