Manuel d'utilisation / d'entretien du produit RX1510 du fabricant RuggedCom
Aller à la page of 45
RuggedBackbone™ RX1510 Hardware Installation Guide Revision 104 - October 14, 2011 www.RuggedCom.com.
RuggedBackbone™ RX1510 RuggedBackbone™ RX1510: Hardware Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted.
RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 3 RX1510 Installation Guide Rev 104 Table of Contents FCC Statement And Cautions ................................................................................................... 8 1. Product Overview .
RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 4 RX1510 Installation Guide Rev 104 3.14.1. APE Overview .............................................................................................. 34 3.14.2. Supported Operating Systems .....
RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 5 RX1510 Installation Guide Rev 104 List of Figures 2.1. RX1510 Chassis Slot Assignment .................................................................................... 11 2.2. Front View - RX1510 .
RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 6 RX1510 Installation Guide Rev 104 3.19. RJ45 Ethernet Pin Configuration .................................................................................... 25 3.20. RJ45 Serial Pin Configuration .
RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 7 RX1510 Installation Guide Rev 104 List of Tables 2.1. Module Status LED Indications ......................................................................................... 12 3.1. RJ45 Serial Console Pinout .
FCC Statement And Cautions RuggedCom® RuggedBackbone™ 8 RX1510 Installation Guide Rev 104 FCC Statement And Cautions Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
1. Product Overview RuggedCom® RuggedBackbone™ 9 RX1510 Installation Guide Rev 104 1. Product Overview 1.1. Functional Overview The RuggedBackbone™ RX1510 is a cost-efficient, rugged layer 3 switch and router.
1. Product Overview RuggedCom® RuggedBackbone™ 10 RX1510 Installation Guide Rev 104 WAN Port Options • Up to 4 T1/E1 ports via RJ45 connectors (channelized/unchannelized) • Up to 2 E1 ports via.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 11 RX1510 Installation Guide Rev 104 2. RuggedBackbone™ Modules The RX1510 chassis provides six module slots . Each slot accommodates a particular type of RuggedCom module. Figure 2.1, “RX1510 Chassis Slot Assignment” shows the module slots on the RX1510.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 12 RX1510 Installation Guide Rev 104 2.1. Front Panel The RX1510 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected 10/100Base-T Ethernet port for system management out of band from the switch fabric.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 13 RX1510 Installation Guide Rev 104 2.2. Line Modules (LM) The RuggedBackbone™ RX1510 supports four line modules in slots LM1 through LM4 . Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 14 RX1510 Installation Guide Rev 104 2.2.3. SFP Modular Figure 2.12. FG5*: 2 × 1000LX/1000SX SFP Figure 2.13. FX5*: 4 × 100FX/100LX/100SX SFP Figure 2.14. 6FX50: 6 × 100FX SFP 2.2.4. WAN Figure 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 15 RX1510 Installation Guide Rev 104 2.2.7. DDS - Digital Data Services Figure 2.23. D02: 1 × DDS RJ45 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 16 RX1510 Installation Guide Rev 104 2.3. Power Supply The RX1510 may be equipped with one or two power modules. The use of two power modules is recommended to provide redundancy and load balancing.
3. Installation RuggedCom® RuggedBackbone™ 17 RX1510 Installation Guide Rev 104 3. Installation 3.1. Mounting The RuggedBackbone™ RX1510 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis.
3. Installation RuggedCom® RuggedBackbone™ 18 RX1510 Installation Guide Rev 104 Figure 3.3. DIN Rail Mounting: Side View 3.1.1. RX1510Dimensions Figure 3.
3. Installation RuggedCom® RuggedBackbone™ 19 RX1510 Installation Guide Rev 104 Figure 3.5. RX1510Dimensions – Top View Figure 3.6. RX1510 Dimensions – Side View.
3. Installation RuggedCom® RuggedBackbone™ 20 RX1510 Installation Guide Rev 104 3.2. Power Supply Wiring and Grounding The RX1510 supports dual redundant power supplies, power module 1 (PM1) and power module 2 (PM2). Power connections are located on the PM1 and PM2 module face plates.
3. Installation RuggedCom® RuggedBackbone™ 21 RX1510 Installation Guide Rev 104 3.2.3. Chassis Ground Connection The RX1510 chassis ground connection, shown in Figure 3.11, “Chassis Ground Connection” , uses a #10-32 screw. It is recommended to terminate the ground connection in a #10 ring lug.
3. Installation RuggedCom® RuggedBackbone™ 22 RX1510 Installation Guide Rev 104 3.2.5. DC Power Supply Wiring Examples + + Figure 3.13. Wiring for Two DC Power Supplies (24P or 48P modules shown) • For 125/230VAC rated equipment, a appropriately rated AC circuit breaker must be installed.
3. Installation RuggedCom® RuggedBackbone™ 23 RX1510 Installation Guide Rev 104 • The placement of the AC and DC power supplies is not slot-dependent. Either PM slot can be used for AC or DC power. • For 110/230VAC rated equipment, an appropriately rated AC circuit breaker must be installed.
3. Installation RuggedCom® RuggedBackbone™ 24 RX1510 Installation Guide Rev 104 3.4. Serial Console Port The serial console port on the front panel provides access to the boot-time control and configuration menu interface, and a console interface to the ROX™ operating system.
3. Installation RuggedCom® RuggedBackbone™ 25 RX1510 Installation Guide Rev 104 3.6. WAN Ports: BNC The RX1510 supports optional E1 WAN ports with BNC connectors. The Tx and Rx connections are labelled on the line module. See the illustration below for the connection configuration.
3. Installation RuggedCom® RuggedBackbone™ 26 RX1510 Installation Guide Rev 104 Cabling Category 1000Base- TX Compliant Required Action < 5 No New wiring infrastructure required. 5 Yes Verify TIA/EIA-568-A compliance. 5e Yes No action required. New installations should be designed with Category 5e or higher.
3. Installation RuggedCom® RuggedBackbone™ 27 RX1510 Installation Guide Rev 104 3.8. Serial Ports: RJ45 The RX1510 supports serial port line modules with RJ45 connections. On power-up, all serial ports default to RS485 mode. Each port can be individually set to RS232, RS485, or RS422 mode via software.
3. Installation RuggedCom® RuggedBackbone™ 28 RX1510 Installation Guide Rev 104 3.10. DDS Rx and Tx LED Indications The DDS module features Rx and Tx LED indicators that display transmit and receive status.
3. Installation RuggedCom® RuggedBackbone™ 29 RX1510 Installation Guide Rev 104 3.11.1. Module Insertion – SFP Special attention must be paid to the orientation of SFP modules upon installation in the RX1510 chassis. The figure below shows the proper orientation of SFP modules installed in both upper and lower line modules.
3. Installation RuggedCom® RuggedBackbone™ 30 RX1510 Installation Guide Rev 104 Figure 3.25. SFP module removal 3.12. Fiber Ethernet Ports Depending on the order code of the product, the RuggedBackbone™ RX1510 can be equipped with several different types of fiber optic ports.
3. Installation RuggedCom® RuggedBackbone™ 31 RX1510 Installation Guide Rev 104 3.13. Cellular Modems The RX1510 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA +, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front plate of each module.
3. Installation RuggedCom® RuggedBackbone™ 32 RX1510 Installation Guide Rev 104 3.13.1. GSM, EDGE, HSPA+ Cellular Modem Card The HSPA option is available for use on various GSM based networks. This option supports GSM, GPRS, EDGE, UMTS and WCDMA/HSDPA/HSUPA.
3. Installation RuggedCom® RuggedBackbone™ 33 RX1510 Installation Guide Rev 104 3. Note the location of the SIM card cages. For modules W11 and W32, install the SIM card in SIM 1 .
3. Installation RuggedCom® RuggedBackbone™ 34 RX1510 Installation Guide Rev 104 3.14. APE: Application Processing Engine 3.14.1. APE Overview The APE (Application Processing Engine) is an x86-based computer designed to occupy a single line module slot on the RX1510.
3. Installation RuggedCom® RuggedBackbone™ 35 RX1510 Installation Guide Rev 104 3.14.3. Secondary Network Interface In addition to the gigabit Ethernet interface on the faceplate, the APE features a gigabit Ethernet interface connecting to a port on the RX1510 chassis.
3. Installation RuggedCom® RuggedBackbone™ 36 RX1510 Installation Guide Rev 104 3.14.4. Installing an Operating System We recommend that the operating system be installed and configured by users with experience in installing and administering the chosen operating system.
3. Installation RuggedCom® RuggedBackbone™ 37 RX1510 Installation Guide Rev 104 3.14.5. The APE BIOS The APE module features a BIOS with functionality similar to that of a typical PC.
3. Installation RuggedCom® RuggedBackbone™ 38 RX1510 Installation Guide Rev 104 3.14.8. FAQs Q: How do I use a CD or DVD to install an operating system on the APE module? A: Connect an external CD/DVD drive to one of the APE USB ports.
4. Technical Specifications RuggedCom® RuggedBackbone™ 39 RX1510 Installation Guide Rev 104 4. Technical Specifications 4.1. Power Supply Specifications Input Range Power Supply Type Min Max Internal Fuse Rating Max.
4. Technical Specifications RuggedCom® RuggedBackbone™ 40 RX1510 Installation Guide Rev 104 4.4. Fiber Ethernet Port Specifications The following sections detail fiber optic specifications for ports that can be ordered with the modules on a RuggedBackbone™ RX1510.
4. Technical Specifications RuggedCom® RuggedBackbone™ 41 RX1510 Installation Guide Rev 104 4.4.2. Gigabit Ethernet (1Gbps) Optical Specifications Fixed Gigabit Transceivers Order Code Mode Connector Type Cable Type ( µ m) Tx λ (typ.) (nm) Tx min (dBm) Tx max (dBm) Rx Sensitivity (dBm) Rx Saturation (dBm) Distance (typ.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 42 RX1510 Installation Guide Rev 104 5. EMI And Environmental Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8 kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15 kV 4 IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m Note a Signal ports +/- 4kV @ 2.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 43 RX1510 Installation Guide Rev 104 Test Description Test Levels Enclosure Contact +/-2kV, +/-4kV, +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/-4kV, +/-8kV, +/-15kV IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.
6. Agency Approvals RuggedCom® RuggedBackbone™ 44 RX1510 Installation Guide Rev 104 6. Agency Approvals Agency Standards Comments TUV UL 60950-1:2007, CAN/CSA-C22.
7. Warranty RuggedCom® RuggedBackbone™ 45 RX1510 Installation Guide Rev 104 7. Warranty RuggedCom warrants this product for a period of five (5) years from the date of purchase. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté RuggedCom RX1510 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du RuggedCom RX1510 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation RuggedCom RX1510, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le RuggedCom RX1510 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le RuggedCom RX1510, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du RuggedCom RX1510.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le RuggedCom RX1510. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei RuggedCom RX1510 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
