Manuel d'utilisation / d'entretien du produit R8C/15 du fabricant Renesas
Aller à la page of 28
REJ10J0746-01 10 RENESAS SINGLE-CHIP MICROCOMPUTER M16C FAMILY / R8C/Tiny SERIES Rev .1.10 Renesas Solutions Corp. Revision date : Mar 01, 2005 www .renesas.
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party.
3 T able of Content s 1. accessory softwares to inst all 2. Until a sample program is operated with an emulator software P4 2.1 Flash programmer (Flash developm ent toolkit) Inst allation P4 2.2 Emulator Sof tware, C Compile r and High-performance Embedded Workshop Inst allations P10 2.
4 1. accessory softwares to install 1) Note the following point s before installing. a) The M3T -NC8C has already been installe d. b) The M3T -NC30WA has already been installed. c) The emulat or software h as already been installed. Install the sof tware attached to this product after uninst alling the above soft ware.
5 Click “OK”. Click “Next” Select language to be used and click "Ne xt".
6 Only when you agree w ith License Agreement , click "Y es". Click “Next”. Click “Next”..
7 Remove a check. Clic k “Next” Click “Next”. Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”..
8 Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”. Click “Next”. Click “Install”..
9 Click “finish”..
10 2.2 Emulator Sof tware, C Compiler and High-performance Embedded W orkshop Inst allations 1) Installation Double-click an inst aller of CD-ROM ¥ dlp_tool ¥. 2) Installation procedu res are described below . Select the language to be used and cli c k “Next”.
11 Only when you agree w ith License Agreement , click "Y es". Select all and click “Next” Refer to a new folder name, or select from the existing folder list and cli c k “Next”.
12 Refer to a new folder name, or select from the existing folder list and cli c k “Next”. Click “Y es” Check the setting before starting the inst allati on and if the setting is correct, click “Next”.
13 Check the setting before st arting the installation and if the setting is correct, click “Next”. Then, a copy will be started. Click “Finish”.
14 2.3 USB driver inst allation Connect the E8 emulator using the US B cable to the USB port of host ma chine. <Windows XP> Installation proce dures a re described below . If the E8 emulator is connected, it is recogni zed a s a new hardware. Click “Next” after sel ecting “Ins tall the sof tware automatically”.
15 Renesas USB drivers are not authenticated by Mi crosoft, but we provide them based on the sufficient examination. Insert CD-ROM and specif y ¥dlp_tool¥ DRIVERS¥USB¥XP¥.
16 <Windows 98/ME> Installation proce dures a re described below . If E8 emulator is connected, it is recognized as a ne w hard ware. Click “Next” and sta rt inst alling a driver . Put a check into “search for the be st driver for your device” and click “Next”.
17 Click “Next”. Click “Finish”. The installation is complet ed above..
18 2.4 Operate Sample Program 1) Copy ¥Jap anese¥M3A01 15_17¥PROGRAM¥ in CD-ROM to the given folder . 2) Change a file attribute Since the copied file attribute is set to “read-only”, cha nge it to the attribute which can be re ad or written .
19 Click “OK”. The installation is complet ed above..
20 <Windows 98/ME> Select all files in the copied folder by a mouse. Select “File” and “Property”. Remove a check of “Read-only” and click “Apply”.
21 Click “Close”. Perform this setting to files in all folders of “3min_timer” and “ad _on kai”. The installation is complet ed above..
22 3) Connect a t arget b oard Use a user cable to the E8 emulator and connect a t arget bo ard. Perform the below setting for the ju mper setting of a t arget board.
23 4) Compile a sample program The example of the musical scal e pro gram (ad_onkai.hws) is sho w n belo w . (1) S tart High-performance Embedded Workshop Select “program” of st art menu - “Renesas” - “High-perform ance Embedded Workshop” - “High-performance Embedded W orkshop” and click.
24 (4) Select “R5F21 174” for Device and put a check i nto “Download emulator firmware” for Mo de. Click “OK”. (5) When 5V power supply is perfo rmed from E8, put a check into “Powe r supply is carried out ”. Select 5.0V and click “OK”.
25 (3) Execute Click “Debug” - “Ex ecute ”. (4) If clicking “Debug” - “S top a prog ram”, a program will stop. When executing t he program again, click “Debug” - “Execute ”. <Musical Scale Program> When a program execution st art s, LED1(red) lights up.
REVISION HISTORY Description Rev . Date Page Summary 0.10 2004.08.18 - First edition issued 1.00 2005.02.01 - It changed from FDTlight to flash programmer (Flash Developm ent Toolkit).
R8C/15, R8C/17 StarterKit Tu t o r ia l Publication Date Rev.1.10 Mar 01, 2005 Published by: Renesas Solutions Corp. 4-1-6, Miyahara, Yodogawa-ku, Osaka City, 532-0003, Japa n ©2005 Rene sas Te chno logy Cor p. an d Rene sas Solu tion s Corp., Al l Righ ts Reser ved.
Renesas Solutions Cor p. 4-1-6, Miyahara, Y odoga wa -ku, Osaka City , 532-0003, Japan R8C/15, R8C/17 S tarterKit Tu t o r i a l.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Renesas R8C/15 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Renesas R8C/15 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Renesas R8C/15, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Renesas R8C/15 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Renesas R8C/15, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Renesas R8C/15.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Renesas R8C/15. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Renesas R8C/15 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
