Manuel d'utilisation / d'entretien du produit M3A-2152 du fabricant Renesas
Aller à la page of 92
Rev.3.00 Revision Date: Jan. 19, 2007 32176 Group Starter Kit User’s Manual M3A-2152 RE J 1 0 B 0 224- 0 30 0 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Technology Corp.
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with r.
Precautions on Using The Product Described Herein 1. The product described herein should be used in com bination with the part s included with the starter kit. If the p roduct is operated i n combination with any other it em, its operat ion cannot be guaranteed.
Preface Thank you very much for purchasing the 32176 Group Starter Kit, the M3 A-2152G52A and M3A-2152G52. This manual describes how to se t up the hardware and soft ware products included with the 32176 Group Starter Kit and the prec autions to b e observed when using those products.
CONTENTS-1 Content s 1. Overview ....................................................................................................................... .1 1.1 Outline of the S tarter Kit ...............................................................
CONTENTS-2 6.3 M3T -CC32R ...................................................................................................................... ................ 25 6.3.1 Installing M3 T -CC32R .........................................................
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev . 3.00 Jan. 2007 Page 1 of 82 32176 Group Starter Kit User’s Manual M3A-2152 1. Overview 1.1 Outline of the S tarter Kit The Starter Kit M3A-2152G52A and M3A-215 2G52 are provided for the evaluation of the 32 176 Group microcomputers.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 2 of 82 (4) M3T -PD32RM (Emulator Debugg er) M3T -PD32RM, the debugger softw are for the St arter Kit, enab.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 3 of 82 1.2 System Configuration Figure 1.1, Figure 1.2 and Figure 1.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 4 of 82 2. Contents of the Product Package This chapter shows the cont ents of the Starter Kit product pac kage. When unpacking, check t o see that all items are included with your packa ge.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 5 of 82 2.2 Contents of CD-ROM The CD-ROM contains the software, manuals, var iou s data sheets, and sample pr ograms which are needed for you to use th e Starter K it.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 6 of 82 3. Usage Precautions 3.1 Guaranteed Scope of the S tarter Kit The Starter Kit was developed for users to trial th e 32176 Group microcom puter specifications and developmen t environmen t.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 7 of 82 3.3 About M32100T -EZ-E for M3A-2152G52A M32100T -EZ-E in M3A-2152G52A is an emulat or designed exc lusively for 32 176 Group microcomputer , and cannot be used for M32R microcomputers except for 32176 Group.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 8 of 82 3.5 About M3T -PD32RM The following descr ibes precautions to be observ ed when using M3T -PD32RM. 3.5.1 Operating Manuals T o use M3T -PD32RM of M3A-2152G5 2A, see the manuals shown be lo w .
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 9 of 82 (5) About hardware break Debug functions of M3T -PD32RM (or M3S-KD32R) ar e realized by using the M.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 10 of 82 3.6 About Evaluation Board When the evaluation board does not start op eration after s upplied power , check the following points.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 1 1 of 82 4. S tarter Kit Usage Conditions The following shows th e cond itions unde r which the Start er Kit can be used. 4.1 Ambient Conditions T able 4.1 shows the ambient conditions under which the Start er Kit can be used.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 12 of 82 5. Hardware Setup This chapter describes how to set up the hardware comp onents necessary to use the Starter Kit. T able 5.1 and T able 5.2 show how to set up the har dwar e components.
32176 Group S tarter Kit User ’s Manual M3A-21 52 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 13 of 82 5.1.2 M3A-2152 Evaluation Boar d Power Supply and Settings The following shows how to set the M3 A-215 2 Evaluation Board. Use a 5V DC power supply to feed power to th e M3 A-2152 Evaluation Board.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 14 of 82 5.2 Hardware Setup when M3A-2152G52 in Use 5.2.1 M3A-2195 Power Supply Connection and Settings The following shows how to set M3 A-2195. For more details, refer to M3A-2195 User ’ s Manual.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 15 of 82 5.2.3 M3A-2152 Evaluation Boar d Power Supply and Settings The following shows how to set the M3 A-215 2 Evaluation Board. Use a 5V DC power supply to feed power to th e M3 A-2152 Evaluation Board.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 16 of 82 5.3 Hardware Setup when the Eval uation Board by Itself in Use 5.3.1 M3A-2152 Evaluation Boar d Power Supply and Settings The following shows how to set the M3 A-215 2 Evaluation Board.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 17 of 82 6. Software Setup 6.1 M3T -PD32RM M3T -PD32RM is the de bugger soft ware that controls M32100T -EZ-E from the host PC.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 18 of 82 6.1.2 S tarting M3T -PD32RM Before starting M3T -PD32RM, make sure the hardware components have been set up in accordance with the instructions in 5.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 19 of 82 Checking Serial No. While the MCU tab is op en, m ake sure the Serial No. is in acc ordance with the foll owi ng . When M3A-2152G52A in use, M3T -PD32RM can be started only with Serial No.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 20 of 82 6.1.3 Error Messages During M3T -PD32RM S tartup If M3T -PD32RM cannot communicate normally wi th the target system, it appears an error message in a pop-up box.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 21 of 82 6.2 M3S-KD32R M3S-KD32R is the debugger softwar e that controls the M3A-2195 SDI I nterface Board from th e host PC. 6.2.1 Installing M3S-KD32R [Notes for Windows 2000 / NT4.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 22 of 82 6.2.2 S tarting M3S-KD32R B e f o r e s t a r t i n g M 3 S - K D 3 2 R , m a k e s u r e t h e h a r d w a r e c o m p o n e n t s h a v e b e e n s e t u p i n accordance with the instructions in 5.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 23 of 82 Selecting a Cross T ool While the Debugging Informatio n tab is open, sele ct “CC32R(M32R)” for Co mpiler . For the Starter Kit, M3T -CC32R is the only cross tool which has had its o per ation guaranteed.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 24 of 82 6.2.3 Error Messages During M3S-KD32R S tartup If M3S-KD32R cannot c ommunicate normally wi th the target syst em, it appears an error message in a pop-up box.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 25 of 82 6.3 M3T -CC32R 6.3.1 Installing M3T - CC32R (1) Run cc32rv500r00_e.exe that is incl uded in the Eng T ool Cc32r directory of the CD -ROM. (2) Proceed to install M3T -CC32R following messages on the inst allation screen.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 26 of 82 Appendix 1 Contents of CD-ROM 1. Contents of CD-ROM The CD-ROM contains the software, manuals, variou s data sheets, and sample programs which are needed for you to use th e Starter K it.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 27 of 82 1.1 Acrobat The CD-ROM contains files necessa r y to read manuals (PDF files). The documents included in the CD-ROM have bee n verified to be displa yed and printed using the f ollowing versions of Acrobat.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 28 of 82 1.2 T ool (1) M3T -CC32R M3T -CC32R (Cross T ool Kit for the M32R Fam ily , trial version whos e useful period is limited) is included. Its directory structure is sh own below .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 29 of 82 (3) M3S-KD32R (Discontinued) M3S-KD32R (De bugger for the Star ter Kit) is included.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 30 of 82 (5) Oldversion Old versions of tools are i nclud ed. Its directory structure is shown below . (Engli sh version) Eng+T ool+Oldversio n+ + Cc32rv3 : Objects for M3T -CC32R V ersion 3 + Cc32rv41 : Objects for M3T -CC32R V ersion 4.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 31 of 82 1.3 Manual The M32R Family related manuals a nd data sheets are included in PDF f il e form at. (Engli sh version) Eng + Manual + + Readme_e.txt : README f ile + e32rsm.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 32 of 82 1.4 Board Related Manual (Document) The product standards, part list, connection diagra ms and user ’ s manuals for the evaluat ion board in Starter Kit are included in PDF file form at.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 33 of 82 (3) M3A-2152 Evaluation Board related document s The related documents for the 32176 Group Evaluati on Boar d are included in PDF fi le format. (Engli sh version) Eng+Do cument +M3A-215 2+ + Readme_e.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 34 of 82 (6) M3A-2191 Pitch Converter relate d document s The M3A-21 14 Evaluation Board and M3A-2 195 Interface Board connecting pitch convert er related documents are in clud ed in PDF file format.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 35 of 82 (8) M3A-2195 SDI Interface Board re lated document s (Discontinued) The SDI Interface B oard documents are included i n PDF file format. (Engli sh version) Eng+Document+Discontinued _model+M3A-2195+ + Readme_e.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 36 of 82 (11) M3A-2142G04 Board related docum ents (Discontinu ed) The related docum ents for the MCU pin processing Board are includ ed in P D F file format. (Engli sh version) Eng+Document+Discontinued _model+M3A-2142G04+ + Readme_e.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 37 of 82 1.5 Sample Program The applicatio n notes, the object and source files o f sample programs for the .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 38 of 82 Appendix 2 Part List A part list is provided in followin g pages for your refer ence.
Handling Classification Part List No. PPL-M3A-2152G52A Tit l e M3A-2152G52A Division in char ge Created Revision Checked Part Name Part Specification Item No.
Handling Classification Part List No. PPL-M3A-2152G52 Tit l e M3A-2152G52 Division in char ge Created Revision Checked Part Name Part Specification Item No.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 41 of 82 Appendix 3 M3A-2152G02 Product S tandards This manual describes how to operate the M3 A-2152G02 (32.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 42 of 82 1. Overview 1.1 Outline of the Product T able 1.1 Mounted Microcomputer T ype Mounted microcomputer type name M32176F4VFP Evaluation board type name (socket mounted type) M3A-2152G02 T able 1.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 43 of 82 1.2 External V iew An external view of the M3 A- 2152G02 is shown below .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 44 of 82 1.3 Block Diagram A block diagram of the M3A-2152G02 is shown below .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 45 of 82 1.4 S pecifications of the Evaluation Board 1.4.1 Electrical Characteristics T able 1.3 Electrical Characteristics Symbol Parameter Rated V alue VCCE, A VCC Power supply voltage 4.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 46 of 82 2. Functional S pecifications 2.1 Configuration of the Power Supply The power to the M32R/E CU can be supplied from two sources, A VCC and VCC E independently of each other .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 47 of 82 2.2 FP Select Circuit The FP selec t circuit is us ed for reprogramming the internal flash memory of the M32 R/ECU. This circuit is configured in such a way that FP is switched from the EXTFP signal by using a jumper (J6).
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 48 of 82 2.3 MOD Select Circuit This circuit is used to set operation modes of the M32R/ECU. The MOD0 power supply is configured in such a wa y that MOD0 is switch ed from th e EXTMOD0 signal of extension connector (CON2) by using a jumper (J8).
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 49 of 82 2.4 Serial I/O Interface The evaluation b oard is interfaced to the h ost PC (DOS/V) through its RS-2 32C by using SIO of the M32R/ECU. Of the RS-232C c ontrol signals, only TXD and RX D are used for connection to the h ost PC (DOS/V).
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 50 of 82 T able 2.5 Channel Selection by a Rot ary Switch Rotary switch position SIO Selected channel 0 SIO0 1 SIO1 2 SIO2 3 SIO3 T able 2.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 51 of 82 2.5 Oscillator Circuit The oscillator circuit can be selec ted from three options by using the j umper J1: a surface mount-type 10 MHz crystal oscillator module, a DIP- t ype crystal oscillator module or a crystal resonator .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 52 of 82 2.6 General-purpose Output Port LED Indicators The LED indicators (L0– L7) are used to indica te the status of the M32 R/ECU ports P1 10–P1 17. Figure 2.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 53 of 82 2.7 General-purpose Input Port Control Circuit The general-purpose input port c ontrol circuit is us ed t o control the status of the M32 R/ECU ports P130–P137 by using toggle switches (S0–S7 ).
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 54 of 82 2.8 Analog Port Input Control Circuit The analog port input control circuit is used to control the statu s of the M32R/ECU ports AD0IN0 and AD0IN1 by using VR controls VOL0 and VOL1.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 55 of 82 2.9 CAN Interface The evaluation boar d is interfaced to a CAN-mounted s ystem by using the internal C AN functions of the M32R/ECU. Note: TX7, TX8, TX9, TX10, TX1 1, TX12, TX13 and TX15 are not mounted but they onl y have patterns available.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 56 of 82 T able 2.13 CAN Connector Pin Assignments Connector Name Pin No Signal Name Description 1 CANH1 Hig.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 57 of 82 2.10 JT AG Peripheral Circuit The evaluation board comes standard with a connec t or for Renesas SDI. This connector consists of the 2.54-mm contact pitch XG4C-103 4 made by Omron Corporation.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 58 of 82 3. Reference Data 3.1 Jumper and T est Pin Lists 3.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 59 of 82 3.2 Extension Connectors CON1 and CON2 3.2.1 Pin Assignments of t he Extension Connector CON1 Figure 3.1 CON1 Connector Pin Assignments (V iew from Side of Mounted Items) T able 3.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 60 of 82 3.2.2 Pin Assignments of t he Extension Connector CON2 Figure 3.2 CON2 Connector Pin Assignments (V iew from Side of Mounted Items) T able 3.4 CON2 Connector Pin Assignments Pin No.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 61 of 82 3.3 Modular Cord for CAN (1) External view Figure 3.3 External View (2) CC1 and CC2 conne ctions T able 3.5 Connection T able CN1 CN2 Pin No. Pin Name Pin Name Pin No.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 62 of 82 3.4 Connection Diagram A connection diagra m is p rovided in fo l lowing pages for y our reference.
E E D D C C B B A A 5 5 4 4 3 3 2 2 1 1 4 3 P 2 3 2 3 P 2 3 5 3 P 2 3 0 3 P 2 3 6 3 P 2 3 3 3 P 2 3 7 3 P 2 3 1 3 P 2 3 0 2 P 2 3 5 2 P 2 3 4 2 P 2 3 1 2 P 2 3 3 2 P 2 3 7 2 P 2 3 6 2 P 2 3 2 2 P 2 3 .
A A B B C C D D E E 4 4 3 3 2 2 1 1 C C V A I C C V E C C V E C C V C C V E C C V E C C V E C C V I C C V I D T J7 , 1 T S R T J7 , 1 O D T J7 , 1 T E S E R 7 , 6 , 1 S M T J7 , 1 K C T J7 , 1 D D V C.
A A B B C C D D E E 4 4 3 3 2 2 1 1 E C C V E C C V E C C V E C C V P F T X E 6 0 D O M T X E 6 7 , 1 P F 6 1 X T C 6 1 X R C 6 0 X R C 7 , 1 0 D O M 7 , 6 , 1 0 X T C e z i S e l a c S e d o C E G A C O N G W D v e R t e e h S f o 0 .
A A B B C C D D E E 4 4 3 3 2 2 1 1 E C C V C C V A E C C V 0 1 1 P 2 3 7 , 6 , 1 1 1 1 P 2 3 7 , 6 , 1 3 1 1 P 2 3 7 , 6 , 1 2 1 1 P 2 3 7 , 6 , 1 5 1 1 P 2 3 7 , 6 , 1 7 1 1 P 2 3 7 , 6 , 1 6 1 1 P .
E E D D C C B B A A 5 5 4 4 3 3 2 2 1 1 C C V C C V C C V C C V C C V C C V C C V C C V 3 D X T 6 1 D X T 7 , 6 , 1 6 3 D X R 2 D X T 7 , 6 , 1 6 0 D X R 6 1 D X R 0 D X T 7 , 6 , 1 6 2 D X R e z i S e l a c S e d o C E G A C O N G W D v e R t e e h S f o 0 .
A A B B C C D D E E 4 4 3 3 2 2 1 1 9 N I 0 D A 2 3 8 N I 0 D A 2 3 4 9 P 2 3 7 6 1 P 2 3 5 N I 0 D A 2 3 3 2 P 2 3 5 N I 1 D A 2 3 1 6 P 2 3 7 5 1 P 2 3 6 1 1 P 2 3 A 3 8 P 2 3 5 6 P 2 3 4 1 P 2 3 1 .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 69 of 82 3.5 Part List A part list is provided follow ing pages for your referenc e.
Handling Classification Part List No. PPL-M3A-2152G02 Ti t l e M3A-2152G02 Division in charge Created Revision Checked Part Name Part Specification Item No.
Part Name Part Specification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 17 Connector CN2 S2B-XH-A J.S.T . Mfg. Mounted directly 1 18 Connector CN1,3 S2B-XH-A J.
Part Name Part S pecification Item No. Description Part No. Part Type Name (Drawing No.,Product S pecification) Manufacturer Name Mounting Direction Required Q’ty per Unit Supply Classification Remarks 33 Laminated ceramic capacitor C1,8,9,10,1 1, GRM21 9F1 1H104ZA01(0.
Part Name Part S pecification Item No. Description Part No. Part T ype Name (Drawing No.,Product S pecification) Manufacturer Na me Mounting Direction Required Q’ty per Unit Supply Classification Re.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 74 of 82 3.6 Pattern Diagram A pattern diagram for the board is pro v ided in this and follow ing pages for your ref erence.
DK30435- A M3A-2152G01 Pattern diagra m(1/5) DRA W I N G No . PG DATE ITE M DES CRIPTI ON M ATERIAL NUM BER ( MATER IAL) VOLUME RENESAS T ECHNOLOGY C ORPORATION 3RD ANGLE PROJECTION 03-3-5 / NTS DATE SCAL E DIM IN mm APPR O VE D DESIGN DRA WN CHECKED Symbol - print - C REJ10B0224-0300/Rev.
DK30435- A M3A- 2152G01 Pattern diagram (2/5) DR A W I NG No . PG DATE IT EM DESCRIPTI O N MATERIA L NUMBER (MATE RIA L) VOL U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 03-3-5 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 1/4 REJ10B0224-0300/Rev.
DK30435- A M3A- 2152G01 Pattern diagram (3/5) DR A W I NG No . PG DATE IT EM DESCRIPTI O N MATERIA L NUMBER (MATE RIA L) VOL U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 03-3-5 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 2/4 REJ10B0224-0300/Rev.
DK30435- A M3A- 2152G01 Pattern diagram (4/5) DR A W I NG No . PG DATE IT EM DESCRIPTI O N MATERIA L NUMBER (MATE RIA L) VOL U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 03-3-5 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 3/4 REJ10B0224-0300/Rev.
DK30435- A M3A- 2152G01 Pattern diagram (5/5) DR A W I NG No . PG DATE IT EM DESCRIPTI O N MATERIA L NUMBER (MATE RIA L) VOL U ME RENESAS TECHNOLOGY CORPORATION 3RD ANGLE PROJECTION 03-3-5 / NTS DAT E SCAL E DIM IN mm APPR O VE D DES IGN DR AWN CH E C KED Patter n 4/4 REJ10B0224-0300/Rev.
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 80 of 82 3.7 Diagram of External Dimension A diagram of external dim ension for the board is prov ided in followin g pages for your refe renc e.
. o N G N I W A R D G P E T A D M E T I N O I T P I R C S E D ) L A I R E T A M ( R E B M U N L A I R E T A M E M U L O V 6 3 4 0 3 K D 1 0 G 2 5 1 2 - A 3 M n o i s n e m i d l a n r e t x e f o m a .
32176 Group S tarter Kit User ’s Manual M3A-2152 REJ10B0224-0300/Rev .3.00 Jan. 2007 Page 82 of 82 3.8 Description of Board Silk The color of boar d silk indicates solde r specification when the i tems on board are mounte d.
REVISON-1 REVISION HISTORY 32176 Group Star ter Kit User’s Manual M3A-2152 Description Rev. Date Page Summary 1.00 Jun. 27, 2003 — First edition 1.10 Oct. 03, 2003 — Added Windows XP as OS of Host availa ble PC 2.00 Mar. 11, 2004 — - Incorporated Installation Manual - Added system configuration dia gra ms (1.
.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.
32176 Group Starter Kit User’s Manual M3A-2152.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Renesas M3A-2152 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Renesas M3A-2152 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Renesas M3A-2152, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Renesas M3A-2152 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Renesas M3A-2152, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Renesas M3A-2152.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Renesas M3A-2152. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Renesas M3A-2152 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
