Manuel d'utilisation / d'entretien du produit 300 Series du fabricant RCA
Aller à la page of 64
SpeedT ouch™ USB/330 ADSL USB Modems Setup and User’ s Guide Release R3.0.1 300 SERIES.
.
SpeedT ouch™ USB/330 Setup and User’ s Guide Release R3.0.1.
Status v4.0 Change Note Pec kel be e nS Shor t Title STUSB/330 Setu p and User’ s G uide R3.0.1 (en) Copyright © 2004 THOMSON. All r ights reserved. Passing on, and copyi ng of this document, use and communication of its contents is not perm itte d without written authorization from THOMSON.
E-SIT-CTC-20030702-0003 v4.0 3 Contents 1 SpeedTouch™ Introducti on ...................... .................... 5 1.1 Getting Acquainted with the SpeedTouch™ ............................. ....................... 6 1.2 SpeedTouch™ Support .......
E-SIT-CTC-20030702-0003 v4.0 4 4 SpeedTouch™ Diagnostic s ........................ .................. 43 4.1 The SpeedTouch™ Status Icon ....................... ................................................. 44 4.2 The Diagnostics Appl ication .
1 SpeedTouch™ Introduction E-SIT-CTC-20030702-0003 v4.0 5 1 SpeedT ouch™ Introduction Introduction Thank you for pur chasing the SpeedT ouch™US B/330 ADSL USB modem! With the awar d-winning SpeedT ouch™ As ymme tric Digital Subscriber Line (ADSL) modem surfing the Internet will become a whole ne w experience.
1 SpeedTouch™ Introduction E-SIT-CTC-20030702-0003 v4.0 6 1.1 Getting Acquainted with the SpeedT ouch™ Deliver y check Check your SpeedT ouch™ packag e for the following items: • One SpeedT ou.
1 SpeedTouch™ Introduction E-SIT-CTC-20030702-0003 v4.0 7 1.2 SpeedT ouch™ Suppor t Suppor ted Operating Systems This User’ s Guide describes the in stallati on and use of the SpeedT ouch™ und.
1 SpeedTouch™ Introduction E-SIT-CTC-20030702-0003 v4.0 8.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 9 2 SpeedT ouch™ Installation Connection methods The SpeedT ouch™ suppor ts the f ollowing connection methods: • PPP (PPP oE or PPP oA) • RFC1483 Bridged Note PPP oE connectivity for Mac OS 8.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 10 2.1 Installation for MS Windows Operating Systems Introduction This section wil l assist you in installing the SpeedT ouch™ and preparing your PC for your Internet connectivity .
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 11 2.1.1 SpeedT ouch™ Installation Previous SpeedT ouch™ installations If a pr evi ous SpeedT ouch™ installation r e sides on your computer , you ar e able to perform an upgrade of the exis ting SpeedT ouch™ installat ion.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 12 4 The following window appears: Click either Install PPP USB Softw are or Install RFC1483 USB Software depending on your Service Provider’ s sp ecifications. 5 The follo wing window asks y ou to select your local setting.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 13 8 The following windows ask you to select a destination and a program f o lder . In most cases the proposed f olders ar e best suited for the SpeedT ouch™ driver sof t- ware. Follow the instructions and cli ck Next whene ver requested.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 14 The hardware installation procedure Pro ceed as follows: 1 Use the ADSL cable pro vided to wir e the SpeedT ouch™ ADSL por t to y our tele- phone wall outlet or distributed filter . 2 Insert the SpeedT ouch™’ s USB connector into the computer’ s USB por t.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 15 2.1.2 Dr SpeedT ouch™ Introduction The Dr SpeedT ouch™ application allows you to diagnose and tr oubleshoot your Speed- T ouch™.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 16 Using Dr SpeedT ouch™ By default Dr SpeedT ouch™ is star ted automati call y at boot of y our system and runs in the background, i.e. minimized in the status ar ea . To s h o w D r S p e e d To u c h ™ : 1 Double-click in the status area.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 17 • Select the Performance tab to monitor the downstream and upstream perfor- mance . of y our DSL connection: For mor e in formation on Dr SpeedT ouch™ click Help in the application or pr ess F1 for context sensitive help.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 18 2.2 Installation for Mac Operating Systems Introduction This section will assist y ou in installing the SpeedT ouch™ and pr eparing your computer for y our Internet connectivity . Installation The installation procedur e to follow depends on the Mac OS you ar e running.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 19 2.2.1 Installation for Mac OS 8.6/9.x Suppor ted Operating Systems One of the following OSs must be readily installed on your computer : • Mac OS 8.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 20 6 The installer copies t he necessa ry files to y our com puter . 7 The following screen a p pears: Click OK to procee d. 8 At the end of the procedur e , the follo wing window appears: Click Restar t to finish the installation and restart your computer .
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 21 5 Close the Modem control panel. A dialog box appears asking whether you want to sa ve the changes you made: Click Save to sa ve y ou r changes to the configuration. As a result y our SpeedT ouch™ connection is installed and ready for use.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 22 2.2.2 Installation for Mac OS X Suppor ted Operating Systems The following OS must be readily installed on your computer : • Mac OS X v10.1, v10.2 and v10.3 Note Mac OS X v10.0 users must download the free upgrade to Mac OS X v10.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 23 5 The installation window a pp ears: Click Continue . 6 The Software License Agr eement scre en appears: When you click Continue , you are pr om pted to agree to the terms of the soft war e license agree ment.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 24 9 At the end of the procedur e , the follo wing window appears: Click Restar t to quit the installer .
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 25 If you want to connect to the Internet via: • An RFC1483 connection your connection is installe d and rea dy for use. The SpeedT ouch™ is now prepar ed for connecting you to the Internet (See “3.
2 SpeedTouch™ Installation E-SIT-CTC-20030702-0003 v4.0 26 7 Click the Modem tab. This panel shows the modem configuration: Select SpeedT ouch™ USB Modem in the Modem list and lea ve the other modem settings unchanged.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 27 3 SpeedT ouch™ Internet Connectivity Introduction The SpeedT ouch™ supports two connection pr otocol models: • A PPP (PPPoE or PPP oA) connection See “3.1 Internet Sessions via a PPP Connection” on page 28 for more info rma- tion.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 28 3.1 Internet Sessions via a PPP Connection Introduction The SpeedT ouch™ suppor ts both most popular connection methods: • PPP.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 29 3.1.1 PPP Sessions for MS Windows Star ting a PPP session Pr oceed as follows: 1 Double-click the SpeedT ouch™ Dial-up icon on y.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 30 Network connection icon on the status area While you ar e connected, y ou can find the netw ork connection icon showing two PCs co.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 31 Configuring multiple entries In case you ha ve more than one account, and/or multiple SpeedT ouch ™ de vices connected to your PC , y ou can create mult iple Dial-Up Netw orking (DUN) entries for the SpeedT ouch™, with specific credenti als, pr oper ties and home web page.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 32 3.1.2 PPPoA Sessions for Mac OS 8.6/9.x Note For PPP oE session connectivity , see “3.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 33 T erminating a PPPoA session T o release a r emote access connection, click the Remote Access icon in the contr ol strip , and select Disconnect : As a result the connection is r eleased.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 34 3.1.3 PPP Sessions for Mac OS X Star ting a PPP session Pr oceed as follows: 1 Click the Internet Connect dock ling. Note If the Internet Connect dockling is not a vailable , go to the Applications folder on the system startup disk and double-click Internet Connect .
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 35 T erminating a PPP session Pro ceed as follows: 1 Click the Internet Connect dock ling. Note If the Internet Connect dockling is not a vailable , go to the Applications folder on the system startup disk and double-click Internet Connect .
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 36 3.2 Internet Sessions via an RFC1483 Bridged Connection Connectivity The RFC1483 Bridged connection offers two connectivity scenario’ s: • IEEE802.1D T ransparent Bridging This connection pr ovides instant access wit hout the ne ed of “opening” a connec- tion.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 37 3.2.1 Using an MS Windows XP BroadBand Connection. Configuring a broadband connection Pro ceed as follows: 1 On the Start menu, click (Setti ngs >) Contr o l P anel . 2 The Control Panel window appears.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 38 6 In the next window , select Connect using a broadband connection that requires a user name and passwor d : Click Next to continue. 7 In the next window , give a name to th e connection y ou are cr eating, e .
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 39 9 In the next window , fill in the Internet account information. This information should be pro vided by your service provider: 10 At the end of the configuration the following window a p pears: Click Finish to complete the con figuration.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 40 5 As soon as the connection is establishe d, the connection message box and dial-up window are minimized into a DUN icon in the system tray: Y ou can open your web br owser and surf the Internet.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 41 3.2.2 Using the Mac OS X PPPoE Dial-in Client Configuring a broadband connection Pro ceed as follows: 1 On the Apple menu, click System Pref erences . 2 The System Pref erences window appears.
3 SpeedTouch™ Internet Connectivity E-SIT-CTC-20030702-0003 v4.0 42 Star ting a broadb and Internet session Pro ceed as follows: 1 Click the Internet Connect dock ling. Note If the Internet Connect dockling is not a vailable , go to the Applications folder on the system startup disk and double-click Internet Connect .
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 43 4 SpeedT ouch™ Diagnostics Introduction This section describes the SpeedT ouch™ Diagnostics tool.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 44 4.1 The SpeedT ouch™ Status Icon SpeedT ouch™ Status Icon As soon as your SpeedT ouch™ is in stalled, a SpeedT ouch™ status icon is displa yed: • For MS Windows OSs the SpeedT ouch™ status icon is found on the status area.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 45 4.2 The Diagnostics Application Introduction The Diagnostics appl ication allows you to ov er view specific information on the vari ous la yers the SpeedT ouch™ uses to transmit or r eceive information o ver the Asymmetric Digital Subscriber Line (ADSL) link .
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 46 4.2.1 The Diagnostics Application for MS Windows Opening the Diagnostics window Double-click the SpeedT ouch™ Status icon in the status area to open the Speed- T ouch™ Diagnostics windo w .
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 47 Basic data In case the SpeedT ouch™ has esta blished ADSL line synchronization, the following data are displa yed: Throughput bars The thr.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 48 Proper ties menu Left-click the upper-left corner of the Sp eedT ouch™ USB Diagnostics wi ndow or right- click the SpeedT ouch™ status i.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 49 4.2.2 The Diagnostics Application for Mac OS 8.6/ 9.x Opening the Diagnostics window Open the Applications folder on your system startup disk: Open the SpeedT ouch™ Diagnostics by double-clicking the Diagnostics icon.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 50 Basic date In case the SpeedT ouch™ has established ADS L line synchr onization, the following data are displa yed: Diagnostics buttons The following buttons are a vailab le: Data Description Bytes Sent Shows the total number of se nt bytes since ADSL link synchroni- zation.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 51 4.2.3 The Diagnostics Application for Mac OS X Opening the Diagnostics window Click the SpeedT ouch™ status dockling to open the SpeedT ouch™ Diagnostics window . Note Y ou can also go to Applications > SpeedT ouch™ > USB and dou ble-click Diagnostics.
4 SpeedTouch™ Diagnostics E-SIT-CTC-20030702-0003 v4.0 52 Basic data In case the SpeedT ouch™ has esta blished ADSL line synchronization, the following data are displa yed: Throughput bars The thr.
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 53 5 T roubleshooting Introduction This chapter pr ovides information on how to i dentify and corr ect some common prob- lems you ma y encounter when using the SpeedT ouch™.
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 54 5.1 General Solving problems In most cases the described solutions will solv e the problem. How ev er , if the problem k eeps persistent, reinstallation of your SpeedT ouch™ might solve the pr oblem.
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 55 Normal operation during a session In this state the USB LED is assigned to th e downstr eam (R X ) data channel (towards the USB connection). The ADSL LED is assigned to the upstream (T X ) data channel (towards the ADSL channel).
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 56 5.2 SpeedT ouch™ System Software Updates System software updates (all OSs) Y ou can check for system software upgrades via the support pages at th e SpeedT ouch™ web site: www . speedtouch.com/support.
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 57 5.3 Removing a SpeedT ouch™ Driver Installation Introduction This section describes how to remov e the SpeedT ouch™ driv ers from your system. if your computers runs: • MS Windows OS Pr oceed with “5.
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 58 5.3.1 Removing a SpeedT ouch™ Driver Installation on MS Windows Procedure Pro ceed as follows: 1 Insert the SpeedT ouch™ Setup CD-R O M in y our PC's CD-R OM drive. The SpeedT ouch™ CD Br owser will star t automatically .
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 59 5.3.2 Removing a SpeedT ouch™ Driver Installation on Mac OS 8.6/9.x Procedure Pro ceed as follows: 1 Insert the Sp eedT ouch™ Setup CD-R OM in your computer’ s CD-R OM drive and open the OS9 folder .
5 Troubleshooting E-SIT-CTC-20030702-0003 v4.0 60 5.3.3 Removing a SpeedT ouch™ Driver Installation on Mac OS X Procedure Pro ceed as follows: 1 Go to Applications > SpeedT ouch™ > USB and double-click SpeedT ouc hUSBUnin- staller . 2 The Uninstaller window appears: Click Uninstall to continue .
.
© 2004 THOMSON. All rights r eserved. E-SIT -CTC-20030702-0003 v4.0 300 SERIES www.speedtouch.com Built for excellence.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté RCA 300 Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du RCA 300 Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation RCA 300 Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le RCA 300 Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le RCA 300 Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du RCA 300 Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le RCA 300 Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei RCA 300 Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.