Manuel d'utilisation / d'entretien du produit QSTD2404 du fabricant Q-See
Aller à la page of 75
QSTD2400 Serie s DVR User’s Manual i QSTD240 4/QST D2408 /QSTD2416 Digital V ideo Rec orders User ’ s M anual For H.264-4- channel/ 8-channel/16- channel Digital V ideo Recorders All rights reserv.
QSTD2400 Serie s DVR User’s Manual ii CAUTION Please read this user ’s manual carefull y to en sure that you use t he device correc tly and sa fely . This manual is for the 4-chann el, 8-channel and 16-c hannel QSTD2400 Series DVRs. In this manual, we use the QSTD2408 200FPS 8-channel DVR as an ex ample.
QSTD2400 Serie s DVR User’s Manual iii T able of Contents T able of Co ntents ................................................................................................. iii CHAPTER 1 Introduction ..............................................
QSTD2400 Serie s DVR User’s Manual iv CHAPTER 5 Managing the DVR ..................................................................... 38 5.1 Formatting Hard Drive s ............................................................................ 3 8 5.
QSTD2400 Serie s DVR User’s Manual 1 CHAPTER 1 Introduction 1.1 DVR Introduction This mod el DVR (Digi t al Video Rec order) is designed especially for CCTV systems. It uses h igh perfo rmance video processing chips and an embedded Li nux syst em. It also us es many a dvanced technologies, such as standard H.
Digital V ideo Recorde r User Manual 2 ALARM • 4/8/16 channel alarm input and 4 channe l a larm output availa ble depending on model. • Supports schedule for motion detecti on and sensor alarm • Supports pre-recording and post reco rding • Supports linked ch annels recording o nce motion or s ensor alarm triggere d on one channel .
QSTD2400 Serie s DVR User’s Manual 3 CHAPTER 2 Hardware Installation Notice : Check the unit and the accessories a fter recei ving the DVR. Please disconne ct the power be fore connecting other devices. Do not hot plug in/out Notice : Some vendors sell this DV R as part of a packa ge with a hard drive alread y installed.
Digital V ideo Recorde r User Manual 4 2.2 Front Panel The Front Panel Layout is shown as Fig 2.3 F ront Panel. Fig 2.3 Front Pa nel 1 Heat Release Window Allow heat to escape from DVR 2 HDD Lock Lock.
QSTD2400 Serie s DVR User’s Manual 5 2.3 Rear Panel 2.3.1 Rear Panel La y out The Rear Panel Layout for 8 Channel DVR is shown as Fig 2.4 Rear 8Ch. Fig 2.
Digital V ideo Recorde r User Manual 6 The Rear Panel Layout for 16 Channel DVR is shown as Fig 2.4 Rea r 16Ch. Fig 2.5 Rear Panel for 16-channel DVR Item Name Description 1 Spot out Conne ct to monitor as an AUX output channel by channel .
QSTD2400 Serie s DVR User’s Manual 7 The Rear Panel Layout for 4 Channel DVR i s shown as Fig 2.4 Rear 4 Ch. Fig 2.6 Rear Panel for 4-channel DVR Name Description 1 Video in Video input chan nels fr.
Digital V ideo Recorde r User Manual 8 2.3.2 Installing Sensor Alarm The DVR has 4, 8, o r 16 channel a larm input (depending on model) a nd four-channel alarm output. Alarm Input: The al arm in put is triggered by elec tric level (High: 5V , Low: 0V).
QSTD2400 Serie s DVR User’s Manual 9 2.4 Remote Control The remote control uses two AAA size batteries and works aft er loading batteries as follows: STEP1 Open the bat tery cover of the Remote Control STEP2 Insert batteries.
Digital V ideo Recorde r User Manual 10 2.5 Controlling w ith Mouse 2.5.1 Connect Mouse DVR supports PS/2 or USB mouse through the ports on the rear panel, please refer to Fig 2.10 Re mote Control. Notice : If mouse is not de tected or does not work, try the following: 1.
QSTD2400 Serie s DVR User’s Manual 1 1 CHAPTER 3 Basic Operat ing Instructions 3.1 Power On /Off Notice : Before you power o n the unit, please make sure all the connections are good .
Digital V ideo Recorde r User Manual 12 Symbol Meaning Symbol Meaning Audio enabled in live mode Audio disabled in live mode (green) Manual re cording (blue) Scheduled recording (yellow) Motion detect.
QSTD2400 Serie s DVR User’s Manual 13 3.2 Login & User Management Users can logout and login to the DVR system . Users cannot do any o ther operations ex cept changing the multi-screen display when logge d out. They are logged ou t when the system starts or restart s.
Digital V ideo Recorde r User Manual 14 Add & Delete user s: This unit has a default administrato r and two us er groups, advanced and normal user . It supports 1 administrator and 15 users total. Admi nistrator can add or delete ot her users, and change their group level.
QSTD2400 Serie s DVR User’s Manual 15 3.3 Recording 3.3.1 Record Setup Users ne ed to install and format a HDD, un less the unit came w ith a hard drive already installed, and set all the recording parameters before recording. There are f our recording modes .
Digital V ideo Recorde r User Manual 16 3.3.2 Manual Recording Just press the REC button on th e front panel after exiting system setup. Press the Sto p button to stop recording. Y ou can also press the REC button on remote controller , click again to stop, or click the REC bu tton on the control bar with mouse, cli ck again to stop.
QSTD2400 Serie s DVR User’s Manual 17 3.3.4 Motion Detection Rec ording This unit supports recording channels and PTZ linking. This means it will record o n any came ras, or trigg er any spe ed dome to go to p resets or do auto cruise once mot ion is detected.
Digital V ideo Recorde r User Manual 18 STEP4 Select alarm out a nd record ing channels. It can t rigger any alarm out and cameras to record once motion is detected. STEP5 Enable or dis able Bu zzer on board. Selec t speed do me and enable p reset or auto cruise (if you are using a PTZ camera).
QSTD2400 Serie s DVR User’s Manual 19 3.4 Pla y back This unit supports ti me search and event search. It displays full screen or 4 screens in playback. Click ri ght mouse to sho w the control bar, refer to Fig 4.1 Control Bar . Click Search, the window below will appear on screen.
Digital V ideo Recorde r User Manual 20 STEP3 This u nit has full sc reen and 4 s creen pla yback. Select the s creen display mode and the channels. STEP4 If want to change the d ate, press Date button. Set hour and minutes of start time. If it reco rded at that time, the boxes will sh ow green.
QSTD2400 Serie s DVR User’s Manual 21 3.5 Backup & Viewing This unit supports backup to built-in SA T A DVD W riter (option al equipment), or to USB Flash drive, through the US B p ort on the front panel. Users can also make backup by IE browser via internet, refer to 6.
Digital V ideo Recorde r User Manual 22 STEP6 It will show “Backu p complete” after finished, as shown below . Check & View: Users can view the backup w ith the t hird party software like realplayer , and W indows Media Player directly in a ddition to the s pecial s oftw are attached with ba ckup.
QSTD2400 Serie s DVR User’s Manual 23 Fig 3.21 Choose Back up Folder STEP3 Set the da te and channels. It will show the recorded vide o in area with green lig ht at the bottom as shown in Fig 3 .
Digital V ideo Recorde r User Manual 24 STEP5 DVR supports A VI conversion. Click “Chang e Fi le to A VI”. The converter will ap pear . STEP6 Click Browse to choose the folder that contains the video ba ckup first. Set the start/end time, select the channels, and th en Click search button.
QSTD2400 Serie s DVR User’s Manual 25 STEP2 Set p rotocol, ba ud rate, address according to the parameters of the speed dome . STEP3 Click Set button at right of P reset. Here us ers can setup presets (see Fig 3.26 Set Presets), and adjust th e s peed dome.
Digital V ideo Recorde r User Manual 26 STEP6 Click butto n to s ave and e xit. Press right mo use b utton to show the cont rol bar . Click PTZ to enter PTZ control , shown as Fig 3.28 PTZ Control. Fig 3.28 PTZ Con trol STEP7 Select the s peed dome. Click t he direction bu ttons to move th e camera.
QSTD2400 Serie s DVR User’s Manual 27 CHAPTER 4 Menu Setup G uide 4.1 Menu Navigation Menu Option Menu Opti on Basic Device name & ID Video format Language Date & time se tup Live audio swit.
Digital V ideo Recorde r User Manual 28 4.2 Main Menu Se tup Click right mous e, or pres s ENT ER button on the f ront panel, the contr ol bar will sho w on the b ottom of the screen as Fig 4.1 Control Bar . Fig 4.1 Cont rol Bar Move the curs or to Menu and click, the option men u will show as Fig 4 .
QSTD2400 Serie s DVR User’s Manual 29 4.2.1 Basic Configuratio n Click BASIC to enter B asic Configuration shown as Fig. 4.4. Basic Configuration Fig 4.4 Ba sic Configuration Here users can set vid eo syste m, menu language, audio, time a nd authorization c heck.
Digital V ideo Recorde r User Manual 30 Camera name : Set camera name. It can be a combina tion of numbers, letters and symbols. Show name: Dis play camera name in live view . Show time: Disp lay the time in live view . Dwell time: It is available for both Sequ ence an d SPOT s imultaneously .
QSTD2400 Serie s DVR User’s Manual 31 Video q uality: There are fi ve opti ons f rom lowest to highest. The higher the value is, the cle arer the recorded picture is, but the more hard drive is taken up. Frame rate : Set recording frame rate. Audio: Enable au dio to record.
Digital V ideo Recorde r User Manual 32 4.2.5 Alarm Configuration Click ALARM to enter Alarm Configuration shown as Fig 4.9 Alarm Configuration. Fig 4.9 Alarm Configuration Here users can set sensor t ype, alarm trigger and alarm hold time. The following are the explanations of each option.
QSTD2400 Serie s DVR User’s Manual 33 4.2.6 Motion Configura tion Click MOTION to enter Motion Config uration as Fig 4.1 1 Motion Configuration. Fig 4.1 1 Motion Co nfiguration Here users can set motio n sensitivity , detection are a, and alarm ou t.
Digital V ideo Recorde r User Manual 34 4.2.7 Network Configura tion Click NETWORK to en ter Network Configuration shown as Fig 4.13 Network Configuration. Fig 4.13 Ne twork Configuration This u nit sup ports DHCP , PPPoE, and DDNS. Use rs enable n etwork fu nction, and configure IP address, DDNS, a nd transmission video parameters here.
QSTD2400 Serie s DVR User’s Manual 35 Fig 4.14 DDNS Co nfiguration Server: Select DDNS server . User name an d Password: Input account information . This unit su pports dual stream. Us ers ca n se t picture quality , fra me rate, and resolution separately fo r network, according to the net work ban dwidth.
Digital V ideo Recorde r User Manual 36 4.2.8 P .T .Z Configuration Click P . T . Z to enter PTZ Configuration as Fig 4.16 PTZ Configuration. Fig 4.16 PTZ Con figuration Here users can set p rotocol, bau d ra te, ad dress, prese ts, a nd auto c ruise tracks.
QSTD2400 Serie s DVR User’s Manual 37 4.2.9 User Configuration Click USER to enter User Manageme nt i nterface s hown as Fi g 4 .18 User Configuration. Fig 4.18 User Co nfiguration Administrator can a dd, delete use rs, a nd c hange their au thorizations.
Digital V ideo Recorde r User Manual 38 CHAPTER 5 Ma naging the DVR 5.1 Formatting Hard Dri ves If you want to record, it is necessary to format the h ard disk first. If not formatted, it will show the position of the disk, free space, and to tal space showing as 0 M at the bottom of the main viewing screen.
QSTD2400 Serie s DVR User’s Manual 39 Notice : If a “no device” or “no file” error appears, it is possible that the USB device is incompatible . Please try an other USB fla sh drive. Plea se be pa tient. It will t ake 2-3 minut es to upda te.
Digital V ideo Recorde r User Manual 40 STEP3 Click System, the window below w ill displa y . Check firmware v ersion, recording parameters here. Fig 5.4 System Information. STEP4 Return to the previous int erface, and click Network. The window below will displa y .
QSTD2400 Serie s DVR User’s Manual 41 STEP1 Press right mouse b utton to show the control bar . Click Menu---->S tatu s---->Events, the window below will appear . Fig 5.6 Events LOG STEP2 Click Da te to ch ange date using a calendar . Click T ype to select the event type.
Digital V ideo Recorde r User Manual 42 5.7 Locking & De leting Files Users can control all video files, in cluding locking an d deleting them. Once users lock an im portant file, it cannot be overwritten or del eted, but the locked files can still b e cleared by formatting the hard d rive.
QSTD2400 Serie s DVR User’s Manual 43 CHAPTER 6 Re mote Surveilla nce 6.1 Accessing the DVR Remotely T o v iew remotely the DVR must have the n etwork configuration setup and then connect with LAN o r internet. Please refer to 4.2.7 Ne twork Configuration.
Digital V ideo Recorde r User Manual 44 Notice : If you use a HTTP port other then 80, you need to add the port number af ter the IP address. For example , if you set the HTTP port as 82, you need to ent er the IP address as 192.168.0.25 :82. User name and p assword here are t he same as that used on the DVR .
QSTD2400 Serie s DVR User’s Manual 45 6.2 Remote Pre view W hen you connect you will see remote preview inter face as shown below: Fig 6.2 Rem ote Previe w Interf ace Full screen , 1/4/8 screen display mode. Camera indicato rs: Picture snapshot Remote viewing: adjust the color of cameras and cont rol PTZ.
Digital V ideo Recorde r User Manual 46 Snap pictures: STEP1 Click on a cha nnel to s elect it. Click the button, a window will appear as in Fig 6.3 Previe w Snap. Fig 6.3 Previe w Snap STEP2 Select frames captured o ne at a time. Enable T i tle and T im e, i t will capture title and time for the image.
QSTD2400 Serie s DVR User’s Manual 47 PTZ control: Click P .T . Z to enter the window s hown be low . Click o n the S p eed Dome’s channel to sel ect it. Fig 6.4 Remote PTZ control Move the speed dome . S to p adjustment. Adjust zoom, focus, I ris, S peed .
Digital V ideo Recorde r User Manual 48 Set cruise : Select this function to set cruise path, the window below will appear : Fig 6.6 Se t Cruise Click Add to add presets for the selecte d cruise. Click the pres et, a down lis t menu will display . Use rs can select presets to add.
QSTD2400 Serie s DVR User’s Manual 49 This DVR supports remote tim e sear ch, even t s earch and one c hannel playback. The above is the defa ult in terface after entering Playback & Backup block. Using time sear ch: STEP1 Select the date in calendar area , s elect t he channe l in channel area .
Digital V ideo Recorde r User Manual 50 Using event searc h: STEP1 Click Event sea rch, the window below will displa y: Fig 6.9 Remote Event Search STEP2 Select the d ate, ch annel and event t ype. Then click Search. All the files found will be listed in the area on the left.
QSTD2400 Serie s DVR User’s Manual 51 STEP4 Click Backup to do remote backup. It will s how the prog ress o n the bottom of the sc reen as shown below: Notice : the backup file is in A VI format. U sers can play with the third pa rty player direc tly .
Digital V ideo Recorde r User Manual 52 6.5 Remote DVR Ma nagement 6.5.1 Checking System Log Re motely Users c an check system log remo tely . For the de tails of system log, refer to T ab 5.1 Details of System Log. STEP1 Click Search-- -->Log, the window belo w will app ear .
QSTD2400 Serie s DVR User’s Manual 53 6.5.2 Lock & Delete F iles Remotely Users can lock and delete video files th rough a network. For the details o f this feature refe r to 5.7 Locking & Deleting Files. STEP1 Click Search---->Pla yback---->File man ager , the window below will appear: Fig 6.
Digital V ideo Recorde r User Manual 54 CHAPTER 7 Mobile S urveillance This DVR supports mo bile s urveillance by PDA or smart phones with W inCE and Symbian OS running on 3G n etworks. W e tested Dopod D600 ( W M5) and Dopod S1 ( W M6), which work fine with the DVR.
QSTD2400 Serie s DVR User’s Manual 55 STEP5 PCam will be op ened after it is installed. STEP6 Input the server ’s a ddress, ID, and password respectively in the columns of “Server” , “User” and “Pass word”, a nd c lick “Go” to login to the DVR.
Digital V ideo Recorde r User Manual 56 7.2 Accessing by Phones with Symbian Please use the sm art phones with Symbian versions sup ported by this unit. STEP1 First, enable the network access on the m obile phone, a nd then run Web browser . STEP2 Input the DVR server ’s IP address in a new-built bookmark.
QSTD2400 Serie s DVR User’s Manual 57 STEP6 Run SCam prog ram. STEP7 Click Options --->Settings to enter login interface. STEP8 Input the public IP address, ID and password respectively , and click OK to login to th e DVR. STEP9 It will show the cam era after accessing successfully .
Digital V ideo Recorde r User Manual 58 Appendix A F A Q Q1. Why doesn’t the DVR st art af ter connecting the po wer? a. The adapter may be damaged. Please try a nother adapter . b. The adapter may not be providing enough p ower . Please remove the HDD to to see if it starts without it.
QSTD2400 Serie s DVR User’s Manual 59 Q6. The mouse is not working, what could be t he problem? a. Wait 5 minutes after mouse is con nected. b. Mouse ma y not be detected. Plug/unplug severa l times. c. The mouse is incompatible with the system. Please try another mouse.
Digital V ideo Recorde r User Manual 60 Enable all the sub options under “Acti veX controls and plug-ins” Then click ok to finish setup. b. Anti-virus p rograms co uld als o block the ActiveX co ntrol, If you still have a problem try closi ng them.
QSTD2400 Serie s DVR User’s Manual 61 Q9: Why doesn’t the mouse work when ins erted into the front USB jack ? The front USB jack is only for backup to flash drive, and USB DVD writer , a nd does not suppo rt USB mouse. Please use the USB jack on the rear panel if using a mouse to operate the system.
Digital V ideo Recorde r User Manual 62 Appendix B Instructions for the Installat i o n of Externa l Hard Drive The installation of the exter nal E-SA T A har d drive is only for the optional backup of r ecor ded files. Ⅰ Ⅰ Ⅰ Ⅰ Connection of port able E-S A T A ha rd drive The connecting method is shown in Fig.
QSTD2400 Serie s DVR User’s Manual 63 . Connection of normal E -SA T A hard dri ve If connecting normal hard drive, please refer to Fig B-2. Its o peration is the same as that of a portable hard drive.
Digital V ideo Recorde r User Manual 64 Appendix C Calculating Recor ding Capacity Users can c alculate the size of hard d rive needed according to the saving time and DVR recording settings . The DVR uses fixed video bit rate . Below a re t he details for different settings for 200 fps 8-channel DVR.
QSTD2400 Serie s DVR User’s Manual 65 For 16-channe l DVR: T otal Recoding capacity =1 12.5(mb/ h) X 24(hours/day) X30(da ys) X16(channels ) = 1296000(MB) = 1296(GB) In this case you should install f our 320 GB SA T A HDDs , and you can record about one month.
Digital V ideo Recorde r User Manual 66 Appendix E DVR Specificati ons Fo r QSTD2404 4-channel DVR Compression format Stand ard H.264 Baseline Video output Composite 1.
QSTD2400 Serie s DVR User’s Manual 67 Appendix F DVR Specifi cations Fo r QSTD2408 8-channel DVR Compression format Stand ard H.264 Baseline Video output Composite 1.
Digital V ideo Recorde r User Manual 68 Appendix G DVR Specificat ions For QSTD2416 16 -channel DVR Compression format Stand ard H.264 Baseline Video output Composite 1.
QSTD2400 Serie s DVR User’s Manual 69 Q-SEE PRODUCT WA RR ANTY Thank you for c hoosing our produ cts. All of our product users have a conditional free warranty repair service for h ardware within 12 m onths starting f rom the purcha se date, and a free exchan ge service within one month (valid fo r manufacturing defects ).
Digital V ideo Recorde r User Manual 70 Customer Informa tion Card User ’s Name Mr . /Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial Number of Produc.
QSTD2400 Serie s DVR User’s Manual 71 If you have questions: Cont act Us: Maili ng Address: Custome r Service: DPS Inc. Phone: 877-998-3440 x 538 8015 E. Cryst al Dr Email: cs@dp s i-usa.com Anaheim, CA 92807 Website: T ech Support: http://www .q-see.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Q-See QSTD2404 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Q-See QSTD2404 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Q-See QSTD2404, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Q-See QSTD2404 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Q-See QSTD2404, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Q-See QSTD2404.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Q-See QSTD2404. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Q-See QSTD2404 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
