Manuel d'utilisation / d'entretien du produit EFG 502 du fabricant Prolific Tech
Aller à la page of 20
PRO line GAS COOKER EFG 502 GB.
2.
3 CONTENTS Instructions for the user Inst ructions for the installer Important Safety Information Description of the appliance Technical Features Using the appliance - Before using the cooker for the .
4 IMPORTANT SAFETY INFORMATION You MUST read these w arnings carefully before installing or using the appliance. Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.
5 DESCRIPTION OF THE APPLIANCE 155 Contr ol panel Oven door glas s Door h and le Ad jus table feet 170 190 210 230 250 270 285 300 Hob 2 1 3 4 2000W 2000W 1000W 2600W semi -rapi d semi -rapi d aux iliar y rapid 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3.
6 TECHNICAL FEATURES Free standing Class 1 Hob Pan support Front right burner Back right burner Front left burner Back left burner Enamelled Rapid Auxiliary Semi rapid Semi rapid 2,60 kW 1,00 kW 2,00 .
7 USING THE APPLIANCE Before using the cooker for the first time Remove all packaging both inside and outside of the cooker, before using it. Before using for the first time, the oven should be heated without food. During this time, an unpleasant odour may be emitted.
8 Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the oven door and lift the small flap on the bottom of the oven cavity. • Hold a lit match or taper to the oven burner. • Push and turn the oven thermostat control knob in a anticlockwise direction to the maximum position 250 degrees C.
9 Cooking with the grill Whenever the grill is in use the heat deflection shield must be fitted to prevent the overheating of the control knobs and facia panel. • First of all fit the heat deflection shield "A" • Hold a lighted match or taper to the grill burner.
10 Using the Hob The Hob Burners The symbol on the knob corresponds to a symbol on the control panel (See description of appliance). Off Maximum level Minimum level Use the maximum position for boiling and the minimum for simmering. Always choose positions between the minimum and maximum, never between maximum and off.
11 Selecting the Correct burner Above every control knob there is a symbol for the corresponding burner. For good cooking results, always choose pans, which correctly fit to the diameter of the burner used (see figs). Choose thick, flat bottom pans. We recommend the flame is lowered as soon as the liquid starts boiling.
12 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely .
13 Oven Cavity The enameled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
14 BEFORE YOU CALL FOR SERVICE If the appliance is not working correctly, please carry out t he following checks, before contacting your local Comet Service Centre. Symptoms Solutions 1. No burner ignition 2. The gas ring burns unevenly 3. The oven or grill burner will not ignite.
15 INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE Important This appliance is supplied for use on NATURAL GAS ONLY and cannot be used for any other gas w ithout modification. Conversion for use on other gases must only be undertaken by a qualified person.
16 INSTALLATION Positioning Remove all the packaging and install the cooker in a dry well, ventilated room away from curtains, paper, alcohol, petrol etc. (See figure). This appliance is approved to class “1” regarding overheating of surrounding surfaces.
17 1 Fitting the adjustable feet Unpack the support brackets with the feet attached. Place a piece of cloth/cardboard onto your floor to prtect both your floor and the cooker. Lay the cooker on its back, fit the support brackets (see fig) using the bolts, washers and nuts supplied and ensure that the nuts are tight.
18 Hob burners • Remove the pan support; • Remove the caps and the burner crowns; • Using a No 7 socket spanner unscrew the injectors and replace them with those required for the type of gas in use (see table no. 1). Reassemble the parts following the same procedure in reverse.
19 Grill burner To replace the grill injector, follow this procedure: • Remove the grill burner after removing the fixing screw. • Replace the injector by means of a No 10 socket spanner; • Refit all parts and test. Flame adjustment Oven burner The burner is correctly adjusted when the flame is stable, silent and goes out without any noise.
..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Prolific Tech EFG 502 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Prolific Tech EFG 502 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Prolific Tech EFG 502, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Prolific Tech EFG 502 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Prolific Tech EFG 502, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Prolific Tech EFG 502.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Prolific Tech EFG 502. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Prolific Tech EFG 502 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
