Manuel d'utilisation / d'entretien du produit FCM-0700A du fabricant Polaroid
Aller à la page of 24
7” Under-the-Counter LCD FCM-0700A Operating Manual.
- - 2 Table of Contents Table of Contents ----------- ---- -- --- --- --- --- -- --- --- --- --- -- ---- -- --- --- -- Important Safety Instructi on ------------ -------- -------- ---------- ------- F.
- - 3 Important Safety Instruction POWER SUPPLY : Connect the supplied adapter to the side of the DVD player in the slot marked “Powe r In”. Plug the two-prong end of the po wer cord to an AC100-240V outlet.
- - 4 Important Safety Instruction Notes: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product.
- - 5 FCC Notice Note: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag ainst harmful interference in a residential installation.
- - 6 Characteristic Features This product has inc orporated LCD display , TV receiver and radio f unction in one system. It is desig ned for conv enient use in th e kitch en; ple ase refer to page 21 for the installation instructions.
- 7 - Front Panel Front Panel Drawing 1. POWER butt on Press to access to or exit the STANDBY mode. 2. TV button Press to enter TV mode. Or under TV mode, press to display the current channel number on the display panel. 3. FM button Press to enter FM radio mode.
- 8 - Rear Panel and display panel 16. ► Press to select items in the setup menu. Or press to increase the volume. Or press to increase the value in the picture setup menu. 17. MENU butt on Press to enter the system setup menu. 18. ▼ Press to select items in the setup menu.
- 9 - Remote Control Prep aration Refer to the drawing, and remove the empty battery receptacle. Insert the battery into the receptacle, please make sure the polarity matches the marks inside the component. Insert the receptacle into the remote control.
- 10 - Remote Control Remote Control Dra w ing 1. POWER butt on Press to access to or exit from the STANDBY mode. 2. TV button Press to enter TV mode. 3. FM button Press to shift to FM signal input mode. 4 . AM button Press to shift to AM signal input mode.
- 11 - Remote Control 7. OK button Press to confirm selections. 8. Press to select menu items or settings. Press buttons to adjust volume. Or press to adjust value in the picture setup menu. Press buttons to select channels or radio stations forward and backward in TV or radio mode.
- 12 - System Connections • Do not connect the power cord unt il all other connections have been made. • Each time you restart the unit, it remembers the last function used.
- 13 - System Connections Connecting T o An tenna Connect the supplied AM/FM antennas to listen to the radio. • In order to improve the signal, move AM loop antenna away from s ystem and other equipment. • Extend FM antenna fully. • Keep the FM antenna as horizontal as possible after connection.
- 14 - System Connections Connecting T o the Power Adapter This unit is powered via the switching power adapter (supplied). See the belo w figure for details: 1. Connect the AC adapter to jack marked with “DC 12V IN” on the rear panel of the unit.
- 15 - Radio Function Radio Function Operation Press the AM or FM button on the remote control or front p anel to enter AM or FM radio mode. Then press the SEEK+/- button for about 1. 5 seconds on the remote control or front panel to start searching forward/backw ard fro m the current frequency.
- 16 - TV Function Basic Operation Connect the antenna to the antenna jack on the re ar panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button on the front panel to turn on t he power.
- 17 - TV Function Use the ▼ , ▲ buttons to select the item you want to set. Use the ► , ◄ buttons to enter the item and to select. Press the ► button on the remote control to exit from the setup men u. Press the ◄ button on the remote control to return to the picture setup menu.
- 18 - TV Function The auto memory will take a few minutes. The unit will search channels fr om the lowest channel to the highest channel in the standard channel list. When tuning operations are complete the unit will exit and store the channels by sequence in the memory.
- 19 - TV Function Power off T o set the playback end time of the signal source use number buttons to input the desired time in sequence of hour , minute. Pres s the ► , ◄ direction buttons to shift between am and pm. When the playback of the signal source is over , the player will enter standby mode.
- 20 - AV Function A V Function The player has an additional AV input so it can function as a moni tor for a DVD pla yer, video cassette player, satellite receiver, video game, etc. When an AV source is connected, press the AV button on the remote control to enter exte rnal input AV mode.
- 21 - Installing the Unit in Kitchen Installing the unit under a cabinet The player unit may be installed in the kitchen with or without the spacers. The suggested mounting position of the unit is under a wall cabinet.
- 22 - Installing the Unit in Kitchen 2. If the cabinet door overhangs the s helf and obstructs the unit, adjust the unit or the shelf height for clearance. 3. Install the unit with the supplied mounting screws. 4. There should be at least 35mm di stance betwee n the unit and the wall.
- 23 - Troubleshooting SYMPTOM CHECK ITEM There is no sound. Make sure system connection is correct. Make sure the player is not under muting mode. Press the MUTE button to turn on the speaker. Make sure the volume is adjusted to the lowest. Adjust the volume upward.
- 24 - Specifications LCD screen size 7 inches System PLL AM 520~1710kHz Radio Frequency Range FM 87.5~107.9MHz Power AC100V~ 240V, 50/60Hz Power Consumption <16W Dimension 355mm X 75mm x285 mm (W/H/D) Weight About 3.4kgs DESIGN AND SPECIFICA TIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE For service, support and warranty information, visit www.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Polaroid FCM-0700A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Polaroid FCM-0700A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Polaroid FCM-0700A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Polaroid FCM-0700A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Polaroid FCM-0700A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Polaroid FCM-0700A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Polaroid FCM-0700A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Polaroid FCM-0700A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
