Manuel d'utilisation / d'entretien du produit WNL-U552 du fabricant Planet Technology
Aller à la page of 41
802.1 1n W i reless USB Adapter WNL-U552 User ’ s Manual V ersion: 1.00 Date: August 2007.
Copyright Copyright © 2007 by PLANET T echnology Corp. All rights rese rved. No part of this p ublication may be reproduced, transmitted, transcribed, st ored in a retrieval system, or translated int.
Federal Communication Commission (FCC ) Radiation Exposur e S tatement This equipm ent complie s with FCC radiati on exposure s et forth for an uncontroll ed environm ent.
CONTENTS Chapter 1 Introduction ........................................................................................ 1 1.1 Features ...................................................................................................................
- 1 - Chapter 1 Introduction For higher wireless transfer performance, we are glad to introdu ce the PLANET 802.11n wirele ss USB adapter – WNL-U552.
- 2 - 1.2 S pecifications Interface USB 1.1 / 2.0, T ype-A St andards Conformance Compliant with 802.1 1b / 802.1 1g / 802.1 1n (draft 2.0) Data T ransfer R ate IEEE 802.
Chapter 2 Installation Procedure Utility Installation 1. Insert the bundled CD into the CD-ROM drive to launch the auto run program. Once comple ted, a menu screen will appear . 2. Click the “Configuration Utility” hy perlink in the WNL-U552 field to init iate the installation procedure.
6. Y ou can see the inst allation progress in this screen. 7. Please click “Finish” to finish the inst allation. - 4 -.
Driver Installation 1. Please insert WNL-U552 into a vacant USB port of your PC. 2. Windows will detect thi s device automatically . When the “Found New Hard ware Wizard” dialo g box appears, please click “Can cel”.
5. The screen will show the rate of progress for the install ation of WNL-U552 as below . 6. Please click “Finish” to complete the driver inst allation - 6 -.
7. The WNL-U552 utility will appear on the screen. Pl ease select the AP you would like to connect and press “Connect” button to link it. Please click” OK” to continu e.
Chapter 3 Configuration Utility The Configuration Utility is a powerful application that helps you c onfigure the WNL-U5 52 and monitor the link status and the statistics during the communi cation process. When the WNL-U552 is installed, t he configuration utility will be displa yed automatically.
3.1 Site Survey When you open the Configuratio n Ut ility, the system will scan all the channel s to find all the access points/stations within the accessi ble range of your card and automatically connect to the wireless device with the highest signal st rength.
3.2 Profile The “Profiles List” is for you to manage the netwo rks you con nect to frequently. You are able to Add/Delete/Edit/Activate a profile. Parameter Description Profiles List The profiles list display all t he profiles and the relative setting s of the profiles including Profile Name, SSID, Channel, etc.
3.2.1 Add Profile - Configuration Parameter Description Profile Name Define a recognizable profile name for you to identify the dif ferent networks. SSID The SSID (up to 32 print able ASCII characters) is the unique name identified in a WLAN. The ID prevent s the unintentio nal merging of two co-located WLANs.
- 12 - Network T ype Infrastructure – This operation mode requires the presence of an 802.1 1 Access Point. All communication is done via the Access Point or Router . Ad-Hoc – Select this mode if you want to connect to anothe r wireless station in the Wireless LAN network with out through an Access Point or Router .
Channel This setting is only available for Ad Hoc mode. Select the number of the radio channel used for the networking. The cha nnel setting shoul d be the same with the network you are connect ing to.
- 14 - WP A – WP A provides a scheme of mutual authentication using ei ther IEEE 802.1x/Extensible Authenticat ion Protocol (EAP) authent ication or pre-shared key (PSK) technology .
- 15 - Note: All devices in the network shoul d use the same encryption method to ensure the communication. WP A Pre-Shared Key The WP A-PSK key can be from 8 to 64 characters and can be letters or numbers. This same key must be used on all of the wirele ss stations in th e network.
An example for MD5 Authentication RADIUS Server Windows 2000 IAS (Internet Au thentication Service) IEEE 802.1x Access Client Access Point RADIUS Client 1 2 3 4 (2) Login with username, password. (1) Client requests t o login the network. (4) Approve or deny user login to the LAN.
- 17 - encrypted tunnel. TTLS support s any prot ocol within it s tunnel, including CHAP , MS-CHAP , MS-CHAPv2, P AP and EAP-MD5. PEAP specifies that an EAP-compliant authentication prot ocol must be used; this card supports EAP-MSCHAP v2, EAP-TLS/ Smart card and Generic T o ken Card.
3.2.2.2 802.1x Setting - CA Server Parameter Description Use Certificate Chain When the EAP authentic ation type such as T LS, TTLS or PEAP i s selected and required a certification to tell the cli ent what server credentials to accept from the authentication server in order to verify the server , you have to enable this function.
name found on the certificat e. Domain name must end in specified name When selected, the serv er name field identifies a domain. Th e certificate must use a server name b elonging to this domain or t o one of its sub-do mains (e.g. zeel ans.com, where the server i s blueberry .
Link S peed (Mbps) Display the transmission and reception rate of the ne twork. The maximum transmission rate is 54Mbps. Throughput (Kbits/sec) Display the s peed of data tran smitted and received. Link Quality This bar indicate s the quality of the link.
3.5 Advance This option enables you to configure mo re advan ced settings, for example: wireless mode, protection mode and etc. Parameter Description Wireless Mode 802.
- 22 - importing. If you are in different country, you have to adjust the channel setting to comply the regulation of the country. Wireless Protection If you have a mix of 802.1 1b and 802.1 1g wireless st ations in the network, it is recommended to enable the protection mech anism.
T urn on CCKM During normal operation, LEAP-enabled client devices mutually authenticate with a new access point by performing a complete LEAP authentication, including communicatio n with the main RADIUS server .
3.6 QoS This wireless network card provides QoS (Qualit y of Service) function, which can improve th e performance of cert ain network applications, like audio / video st reaming, network telephony (V oIP), and others.
Direct Link Setup Enable Enable or disable dire ct link setup (DLS) functio n. This function will greatly improve the data tr ansfer rate bet ween WMM-enabled wireless devices.
- 26 - 3.7 WPS Configuration Wi-Fi Protected Setup (WPS) is the latest wireless networ k technology which make s wireless networ k setup become very simple. If you have WPS-enable d wireless access point, and you want to est ablish a secure connection to it, you don’t have to c onfigure the wireless access point and se tup data encryption.
3.7.1 WPS Setup - PBC (Push-Button Configuration) 1. Push the ‘WPS’ button on your wireless access point (the button used to a ctivate WPS standby mode), or use other way to start WPS st andby mode as the instru ction given by your wirele ss acce ss point’s user manual.
All access point s found will be displayed. Please make sure the access point you wish to connect i s displayed. If not, please click ‘ Rescan’ few more ti mes. Y ou can also click ‘Information’ button to see the detailed informatio n ab out selected access point.
Sometime WPS may fail, and you can click ‘PBC’ butt on few more times to try again. When an access point is connected, you can click ‘Disconnect’ to disconnect your wireless network card from .
Click ‘PIN’ button now , and wait for few seconds to one minute. If a wireless access point with correct PIN code is found, you’ll be connected to that access point: - 30 -.
Y ou may have to click ‘PIN’ for few more times to try again. If you still can not connect to access point by this way , please make sure the PIN code you provided to access point is correct. Note: This function is not support in the OS of Windows VISTA.
3.8 About By choosing this option, you can click the hyperlink to conn ect the PLANET website. You can also obtain basic information ab out t he WNL-U55 2 such as the Driver, Utility and EEPROM Version. The MAC Address of the card is di splayed in the screen as well.
- 33 - Chapter 4 Appendix 4.1 T roubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the adapter . Q. The PLANET WNL-U552 does not work properly . Ans.: 1. Right click on My Computer and select Propert ies.
- 34 - can result in multiple singular BSSs being establish ed, rather than a single BSS with multiple client s associated to it. 6. Check that the Network Con nection for the wireless client is con figured properly . If Security is enabled, make sure that the corr ect encryption keys are ent e red on both the Adapter and the access point.
- 35 - 2. Enable ‘Wireless Protection’ in ‘Advanced’ tab. 3. T ry a lower TX Rate in ‘Advanced’ tab. 4. Disable ‘Tx Burst’ in ‘Advanced’ t ab. 5. Enable ‘WMM’ in ‘QoS’ t ab if you need to use multimedia / telephony related appli cations.
- 36 - 5. What is Infrastructure ？ An integrated wireless and wireless a nd wired LA N is called an Infrastructure configurati on. Infrastructure is applicable to enterpri se scal e for wireless access to central dat abase, or wireless application for mo bile workers.
- 37 - receiver , DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. 13. What is Spread S pectrum ？ S pread S pectrum technology is a wideband radio frequency tech nique developed by the milit ary for use in reliable, secure, mission -critical co mmunication systems.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Planet Technology WNL-U552 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Planet Technology WNL-U552 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Planet Technology WNL-U552, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Planet Technology WNL-U552 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Planet Technology WNL-U552, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Planet Technology WNL-U552.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Planet Technology WNL-U552. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Planet Technology WNL-U552 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
