Manuel d'utilisation / d'entretien du produit Elite PRO 510HD du fabricant Pioneer
Aller à la page of 92
Operating Instructions PR OJECTION MONIT OR RECEIVER PR O-610HD PR O-510HD.
2 <ARB1527> Progressive Scan/HDTV READY Combination with the SH-D09 digital tuner , sold separately , makes it possible to receive all A TSC 18 formats.
<ARB1527> 3 INTRODUCTION Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. Thank you for purchasing this PIONEER Projection Monitor Receiver .
4 <ARB1527> W ARNING IMPOR T ANT SAFETY INSTRUCTIONS AND W ARNINGS • Read all of these instructions. • Keep these instructions for later use. • Follow all warnings and instructions marked on the Monitor . 1. This Monitor is equipped with a polarized alternating current line plug (a plug having one blade wider than the other).
<ARB1527> 5 INTRODUCTION 9. Do not subject your Monitor to impact of any kind. Be particularly careful not to damage the screen surface. 10. Unplug the Monitor from the wall outlet before cleaning. Do not use liquid cleaners or spray-type cleaners.
6 <ARB1527> 1 7 . An outdoor antenna system should not be located in the vicinity of overhead power lines/ electric lights or power circuits, or where it can fall onto such power lines or circuits.
<ARB1527> 7 CONTENTS INTRODUCTION HOW TO READ THIS OPERA TING INSTRUCTIONS ...................... 8 INST ALLING THE MONITOR ........................................................ 9 BASIC OPERA TIONS BEFORE USE .................................
8 <ARB1527> 28 <ARB1527> AUTO CHANNEL PRESET TV SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT .
<ARB1527> 9 INST ALLING THE MONITOR INST ALLA TION PRECAUTIONS: • Keep away from magnetic fields The picture may be distorted if strong magnetic fields are nearby . External speakers should be set at least 2 feet (60cm) away from the Projection Monitor .
10 <ARB1527> INST ALLING THE MONITOR T o improve the image reproduction characteristics of the monitor and to protect the screen from damage or dust, attach the provided protective screen to the screen frame of the monitor following the given procedure.
<ARB1527> 11 Upper panel frame 4. Attach side frame covers: 1) Peel off adhesive strip from rear side of the frame cover . 2) Attach side frame cover along the aluminium edge guards leaving a space of approximately 0 to 1/32 in. (0 to 1 mm) from the upper panel frame.
12 <ARB1527> ◊B√¿≥??ÙÛ ◊B√¿≥??ÙÛ A B Mixer UHF VHF CATV converter STANDBY/ON MAIN POWER POWER DPO STANDBY/ON DTV ANTENNA /CABLE Connect the CA TV converter to the ANTENNA B terminal. (See pages 14 and 15) BEFORE USE Before you watch the TV , perform the following procedure.
<ARB1527> 13 BASIC OPERA TIONS ( 9 9 ( BEFORE USE Inserting batteries into the remote control unit • Furniture and other obstacles may block the infrared light beam so that it cannot reach the sensor behind the Projection Monitor's screen.
14 <ARB1527> Connecting the CA TV conver ter CONNECTING THE ANTENNA • A good color picture depends on a good TV signal. So does good multichannel (stereo program and SAP) sound. Ask your dealer for advice on how to install your external antenna to receive the best possible signal.
<ARB1527> 15 BASIC OPERA TIONS Connecting the CA TV converter with VCR Connecting VHF/UHF antenna and CA TV converter CONNECTING THE ANTENNA ANTENNA /CABLE A B VCR VCR ANTENNA OUT IN Splitter CA.
16 <ARB1527> CONNECTING VIDEO/AUDIO EQUIPMENT • Refer to the instructions of your VCR or DVD/LD player for the detailed connections. • Before making or changing connections, set the power switch to off and unplug the power cord from the AC outlet.
<ARB1527> 17 BASIC OPERA TIONS CONTROL ANTENNA /CABLE A B INPUT 1 INPUT 3 INPUT 2 INPUTS OUTPUTS OUTPUT TV MONITOR /DTV CENTER INPUT INPUT INPUT 3 INPUT 3 SELECT S-VIDEO VIDEO AUDIO AUDIO RGB S-.
18 <ARB1527> RL VIDEO OUTPUT INPUT 4 S - VIDEO L - AUDIO - R VIDEO (MONO) S-VIDEO L R L V R V Video movie/VCR Front panel INPUT jacks There are 4 sets of inputs for VCR and DVD/LD players. Use RCA-type pin plug cords (the same as those used in Hi-Fi systems) for connections.
<ARB1527> 19 BASIC OPERA TIONS CONNECTING VIDEO/AUDIO EQUIPMENT INPUT ANTENNA /CABLE A B INPUT 1 INPUT 1 INPUT 2 INPUTS OUTPUTS OUTPUT TV MONITOR /DTV CENTER INPUT INPUT 3 VIDEO S-VIDEO VIDEO AU.
20 <ARB1527> PUSH FRONT P ANEL FUNCTIONS A flip-down door conceals the control panel. Push gently and release, to open the door . T o close the door , lift it back up into place. NOTE: If you accidentally pull the door , it may not shut properly .
<ARB1527> 21 BASIC OPERA TIONS VOLUME INPUT 4 S - VIDEO L - AUDIO - R VIDEO (MONO) 9 0 FRONT P ANEL FUNCTIONS 8 RETURN button Press to set the Projection Monitor to its initial mode. Initial mode Input selector: Set to TV . TV channel: Remains at the last channel set.
22 <ARB1527> Set the mode switch to TV/DTV . 1 TV POWER button (ST ANDBY/ON) T urns the power of the monitor on and off. 2 Input Selector buttons (TV , DTV * 1 , INPUT 1 to INPUT 4) Press the button to select the source you wish to watch. The screen will display your selection.
<ARB1527> 23 BASIC OPERA TIONS REMOTE CONTROL UNIT FUNCTIONS 0 SPLIT/SEARCH screen buttons SPLIT : Press to turn the SPLIT screen function on and off. SEARCH: Press to select the SEARCH screen mode. SELECT : Selects the screen for switching the channel or input source.
24 <ARB1527> 4 Select a channel. There are three methods for this. 1 Select by pressing the number button (Example) Channel 5 5 → CH ENTER (Or press 0 and then press 5 within 2 seconds of during so.) Channel 12 Press 1 and then press 2 within 2 seconds of during so.
<ARB1527> 25 BASIC OPERA TIONS TO W A TCH TV 2 Select using the TV CH+/– button The channels will switch according to the order set by channel preset (See page 28).
26 <ARB1527> Press MENU on the remote control unit. The MAIN MENU will be displayed on the screen. Select the desired menu item using 5 or ∞ button of the remote control unit, and press SET/ENTER button to perform the desired operations and settings.
<ARB1527> 27 BASIC OPERA TIONS CHECKING THE MENU On screen indicators USE: Indicates in light cyan the buttons that can be used on the menu screen displayed. END: End is for turning off the menu screen by pressing the MENU button. EXIT : T o return to the previous menu screen, use the 5 or ∞ button to move to EXIT and then press SET/ENTER.
28 <ARB1527> AUTO CHANNEL PRESET TV SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT V.
<ARB1527> 29 BASIC OPERA TIONS AUTO CHANNEL PRESET SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT .
30 <ARB1527> Earth magnetism may deviate the color misconvergence in some areas. After setting up the TV , or if the picture color is misconverged, be sure to realign color convergence, after the TV has warmed up for 30 minutes or more.
<ARB1527> 31 BASIC OPERA TIONS 4 Move the red line onto the green line. Move the vertical line. 5 Move the blue line onto the yellow line. SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV ED.
32 <ARB1527> PROGRAM BLOCK (V . CHIP) FUNCTION MP AA RA TING G GENERAL AUDIENCES. All ages admitted. PG P ARENT AL GUIDANCE SUGGESTED. Some material may not be suitable for children. PG-13 P ARENT AL STRONGL Y CAUTIONED. Some material may be inappropriate for children under 13.
<ARB1527> 33 BASIC FUNCTIONS PROGRAM BLOCK (V . CHIP) FUNCTION SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE C.
34 <ARB1527> PROGRAM BLOCK (V . CHIP) FUNCTION 2 3 SET/ ENTER 5 ∞ SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE .
<ARB1527> 35 BASIC FUNCTIONS PROGRAM BLOCK (V . CHIP) FUNCTION 9 After setting, press MENU to turn the menu off. MENU TV/SA T/DVD HOW TO REMOVE BLOCKING FROM A PROGRAM IN PROGRESS When a selecte.
36 <ARB1527> CHANGING P ASSWORD SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT V.
<ARB1527> 37 BASIC FUNCTIONS CHANGING P ASSWORD 4 Enter new password. • Press numeric buttons ‘0’ through ‘9’ to enter a four -digit password and press the SET/ENTER button.
38 <ARB1527> MODE SCREEN CHANGING SCREEN SIZE SELECT SEARCH MODE SCREEN SUB CH FREEZE SPLIT DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ MENU MENU VOL INPUT VOL AUDIO DISPLA Y 1 2 3 4 TV DTV 5 ∞ .
<ARB1527> 39 BASIC FUNCTIONS 4 SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VO.
40 <ARB1527> MUL TI-SCREEN FUNCTION INPUT 4 ¢ 1 2 3 4 TV DTV CH RETURN SEARCH ON/OFF CH TV VOL TV/ DTV CBL /SA T DVD /LD VCR 1 3 2 4 6 5 7 9 8 0 MUTING POWER POWER CH ENTER SUB CH SPLIT SELECT .
<ARB1527> 41 BASIC FUNCTIONS MUL TI-SCREEN FUNCTION SUB CH FREEZE SPLIT SEARCH INPUT 4 ¢ 1 2 3 4 TV DTV CH RETURN ON/OFF CH TV VOL TV/ DTV CBL /SA T DVD /LD VCR 1 3 2 4 6 5 7 9 8 0 MUTING POWER.
42 <ARB1527> CLOSED CAPTION DECODE FUNCTION The closed caption broadcasting multiplexes caption signals (character information) in the video signal to allow the displaying of characters on the screen.
<ARB1527> 43 BASIC FUNCTIONS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDI.
44 <ARB1527> CHANGING CHANNEL SET UP SUB CH SELECT FREEZE SPLIT SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL A.
<ARB1527> 45 BASIC FUNCTIONS CHANGING CHANNEL SET UP SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î.
46 <ARB1527> CHANGING CHANNEL SET UP SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL IN.
<ARB1527> 47 BASIC FUNCTIONS CHANGING CHANNEL SET UP SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î.
48 <ARB1527> 4 PICTURE ADJUSTMENTS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ MENU VOL INPUT VOL AUDIO 1 2 3 4 DTV GUIDE 8 LEARN CH RETURN POWER P.
<ARB1527> 49 BASIC FUNCTIONS PICTURE ADJUSTMENTS 1 2 3 4 INPUT TV DTV ON/OFF SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 EDIT/ SOURCE INFO RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMO.
50 <ARB1527> 4 SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDIO 1 2 3 4 DTV .
<ARB1527> 51 BASIC FUNCTIONS PICTURE ADJUSTMENTS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MEN.
52 <ARB1527> SUB CH SELECT FREEZE SPLIT SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDIO 1 2 3 4 DTV GUIDE 8.
<ARB1527> 53 BASIC FUNCTIONS SUB CH SELECT FREEZE SPLIT SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDIO 1 2.
54 <ARB1527> SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDIO 1 2 3 4 DTV GU.
<ARB1527> 55 BASIC FUNCTIONS 4 SOUND ADJUSTMENTS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MEN.
56 <ARB1527> SOUND ADJUSTMENTS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AU.
<ARB1527> 57 BASIC FUNCTIONS 4 SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VO.
58 <ARB1527> SOUND ADJUSTMENTS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AU.
<ARB1527> 59 BASIC FUNCTIONS SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDI.
60 <ARB1527> SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU VOL INPUT VOL AUDIO 1 2 3 4 DTV GU.
<ARB1527> 61 BASIC FUNCTIONS MENU TV/SA T/DVD SUB CH SELECT FREEZE SPLIT MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU V.
62 <ARB1527> CONNECTION WITH RECEIVER (1) ANTENNA /CABLE A B Splitter CATV converter Cable TV The audio signal output from this unit can be reproduced on the receiver when this monitor is connected to the receiver .
<ARB1527> 63 V ARIOUS FUNCTIONS CONNECTION WITH RECEIVER (1) SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CON.
64 <ARB1527> CONNECTION WITH RECEIVER (1) 6 SPEA KER : N O A U DIO O U T : SYST E M M ODE : OF SYST E M I N / RM FIX E OU A T L F D VAR EX I T USE: END : MENU SET UP SET/ ENTER Select the AUDIO OUT mode.
<ARB1527> 65 V ARIOUS FUNCTIONS INPUT INPUT 1 INPUT 1 INPUT 2 INPUTS OUTPUT CENTER INPUT INPUT 3 VIDEO S-VIDEO VIDEO AUDIO AUDIO FIXED/VAR AUDIO COMPONENT VIDEO (MONO) L R L R ANTENNA /CABLE A B.
66 <ARB1527> CONNECTION WITH RECEIVER (2) SYSTEM MODE setting SUB CH SELECT FREEZE SPLIT 2 3 MENU SET/ ENTER ∞ 5 DTV EDIT/ SOURCE INFO INPUT RECEIVER 4 ¢ MENU VOL INPUT VOL MODE AUDIO DISPLA .
<ARB1527> 67 V ARIOUS FUNCTIONS CONTROL IN OUT IN OUT IN OUT CONTROL CONTROL When the control terminals of Pioneer audio/video units with the Î mark are connected, these units can be operated using the Monitor's remote control unit (see pages 72 to 77).
68 <ARB1527> INPUT 1 2 3 4 TV DTV ON/OFF CH ENTER 5 ∞ 2 3 SET/ ENTER MENU LEARN EDIT/ SUB CH SELECT FREEZE SPLIT SOURCE INFO RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î ME.
<ARB1527> 69 V ARIOUS FUNCTIONS REMOTE CODE SET UP Manufacturer's preset remote control signals 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 .
70 <ARB1527> 1 3 4 6 5 7 9 8 0 INPUT 1 2 3 4 TV DTV ON/OFF CH ENTER 5 ∞ 2 3 SET/ ENTER MENU LEARN EDIT/ SUB CH SELECT FREEZE SPLIT SOURCE INFO RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE .
<ARB1527> 71 V ARIOUS FUNCTIONS REMOTE CODE SET UP • Buttons which can be learnt are as follows. CABLE ....... SOURCE POWER, CH (+), CH (–), CH RETURN, CH ENTER, 1 to 9, 0 S A T ........... SOURCE POWER, CH (+), CH (–), 2 , 3 , 5 , ∞ , SET/ENTER, TV/SA T/DVD MENU, DTV/SA T GUIDE, DTV/(SA T) INFO, CH ENTER, 1 to 9, 0 V C R .
72 <ARB1527> REMOTE CODE SET UP REMOTE CONTROL UNIT SETTING BUTTONS 1 EDIT/LEARN button EDIT : When the EDIT/LEARN button is pressed at the same time as number button 1, the mode will change to preset code edit mode.
<ARB1527> 73 V ARIOUS FUNCTIONS REMOTE CODE SET UP DTV CONTROL BUTTONS For viewing DTV broadcasts, the SH-D09 digital tuner (sold separately) is necessary . The following buttons will not work if a digital tuner has not been connected. When the mode switch is set to TV/DTV , the remote control unit buttons will function as shown below .
74 <ARB1527> REMOTE CODE SET UP CABLE CONTROL BUTTONS CABLE and SA T cannot be selected at the same time. When the mode switch is set to CBL/SA T the cable converter connected to the Monitor can be operated using the buttons 1 to 5 .
<ARB1527> 75 V ARIOUS FUNCTIONS REMOTE CODE SET UP SA T CONTROL BUTTONS CABLE and SA T cannot be selected at the same time. When SA T is preset by REMOTE CODE SET UP , the remote control unit buttons will function as shown below .
76 <ARB1527> REMOTE CODE SET UP VCR CONTROL BUTTONS If the VCR is preset by REMOTE CODE SET UP , the remote control unit button will function as follows when the mode switch of the remote control unit is set to VCR.
<ARB1527> 77 V ARIOUS FUNCTIONS REMOTE CODE SET UP DVD/LD CONTROL BUTTONS DVD and LD cannot be selected at the same time. If the DVD/LD is preset by REMOTE CODE SET UP , the remote control unit button will function as follows when the mode switch of the remote control unit is set to DVD/LD.
78 <ARB1527> Digital tuner Rear panel ANTENNA /CABLE A B AIR CABLE ANTENNA Splitter Splitter Mixer Cable TV VHF UHF USING THE DIGIT AL TUNER (sold separately) TO W A TCH DTV 1 Connect the digital tuner . • Connect the VHF/UHF and Cable TV signal to the digital tuner .
<ARB1527> 79 OTHERS This screen will appear when channel scan has finished. USING THE DIGIT AL TUNER (sold separately) TO W A TCH DTV 4 Press the YELLOW button. • The screen to the right will appear . 5 Press 2 , 3 to select the Digital Audio Out setting.
80 <ARB1527> The above guide is for reference only . High-definition broadcasts are digital and can be easily compressed, thereby creating multiple programs from a single broadcast. As shown in the example above, a high- definition broadcast can be televised as one program (channel 36.
<ARB1527> 81 OTHERS DTV ON/OFF TV TV POWER POWER CH ENTER EDIT/ SOURCE SUB CH INPUT RECEIVER 4 ¢ PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î MENU MENU VOL INPUT VOL SELECT SPLIT 1 2 3 4 .
82 <ARB1527> USING THE DIGIT AL TUNER (sold separately) TO W A TCH DTV INPUT INPUT 1 INPUT 1 INPUT 2 INPUTS OUTPUT CENTER INPUT INPUT 3 VIDEO S-VIDEO VIDEO AUDIO AUDIO FIXED/VAR AUDIO COMPONENT .
<ARB1527> 83 OTHERS USING THE DIGIT AL TUNER (sold separately) TO W A TCH DTV 2 Select the channel of the DTV program you wish to record. (Refer to steps 2 to 5 on pages 78 to 81.) 1 Connect the rear panel MONITOR/DTV OUTPUT jack and the VCR input jack.
84 <ARB1527> INPUT INPUT 1 INPUT 1 INPUT 2 INPUTS OUTPUT CENTER INPUT INPUT 3 VIDEO S-VIDEO VIDEO AUDIO AUDIO FIXED/VAR AUDIO COMPONENT VIDEO (MONO) L R L R ANTENNA /CABLE A B OUTPUTS TV MONITOR.
<ARB1527> 85 OTHERS USING THE DIGIT AL TUNER (sold separately) TO W A TCH DTV 2 W atching DTV 1 Switch the receiver to where the digital tuner’ s signal connect. 2 Set the mode switch to TV/DTV on the monitor’ s remote control. 3 Press the DTV button on the monitor’ s remote control.
86 <ARB1527> MENU INDEX SOUND adjustment menu (See page 55) SCREEN setting menu (See page 39) Closed Caption menu (See page 42) SET UP menu (See page 28) Main menu (See page 26) PICTURE adjustment menu (See page 48) PICTURE M ODE : STD CO NTRAST 0 0 0 0 0 BLAC K LVL .
<ARB1527> 87 OTHERS MENU INDEX CONVERGENCE menu (See pages 30 and 60) SYSTEM IN/OUT menu (See page 63, 66 and 83) CHANNEL SET UP menu (See page 28) AUTO CHANNEL PRESET menu (See page 28) CHANNEL.
88 <ARB1527> TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with the Monitor , check the points below . Sometimes the trouble may lie in another component. Investigate the other component and electrical appliances being used.
<ARB1527> 89 OTHERS TROUBLESHOOTING The following symptoms may be mistakenly regarded as malfunctioning. In many cases, they are not the faults of the Monitor .
90 <ARB1527> SPECIFICA TIONS Display and amplifier section Reception system ........ American TV standard NTSC system Screen size ................................................. 58" (PRO-610HD) 53" (PRO-510HD) C R T .................
<ARB1527> 91 OTHERS.
92 <ARB1527> Printed in Japan <ARB1527-A> Published by Pioneer Corporation. Copyright © 1999 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS [USA] INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pioneer Elite PRO 510HD c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pioneer Elite PRO 510HD - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pioneer Elite PRO 510HD, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pioneer Elite PRO 510HD va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pioneer Elite PRO 510HD, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pioneer Elite PRO 510HD.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pioneer Elite PRO 510HD. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pioneer Elite PRO 510HD ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
