Manuel d'utilisation / d'entretien du produit DJM-800 du fabricant Pioneer
Aller à la page of 24
Operating Instructions DJ MIXER DJM-800.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components.
4 FEATURES CONTENTS CONFIRM ACCESSORIES 1 Designed for high sound quality Analog signals are transmitted by the shortest circuitry and converted to digital format at 96 kHz sampling rate via a 24-bit high quality A/D converter. As a result, signals are passed to the digital mixing stage in the best possible state.
5 CONNECTION PANEL 1. POWER switch 2. MASTER 2 output connectors RCA type unbalanced output. 3. Recording output connectors (REC) RCA type output connectors for recording. 4. PHONO input connectors RCA type phono level (MM cartridge) input connectors.
6 POWER MASTER 2 REC RL R (TRS) L MASTER 1 L R PHONO CONTROL DIGIT AL MIC SIGNAL CUT ADD SIGNAL GND SIGNAL GND LINE DIGIT AL LINE DIGIT AL CD DIGIT AL CD LINE L R AC IN OFF ON 1GND 3COLD MASTER A TT 2.
7 POWER MASTER 2 REC RL R (TRS) L MASTER 1 L R PHONO CONTROL DIGIT AL MIC SIGNAL CUT ADD SIGNAL GND SIGNAL GND LINE DIGIT AL LINE DIGIT AL CD DIGIT AL CD LINE L R AC IN OFF ON 1GND 3COLD MASTER A TT 2.
8 CONNECTING MICROPHONE AND HEADPHONES Microphone The MIC 1 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plug or XLR plug. The MIC 2 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.
9 OPERATION PANEL Microphone input control section 1. Microphone 1 input jack (MIC 1) Use to connect a microphone with an XLR or phone plug. 2. Microphone 2 input jack (MIC 2) Use to connect a microphone with a phone plug. 3. Microphone 1 level control dial (MIC 1 LEVEL) Use to adjust the volume of microphone 1.
10 11. TRIM adjust dial Use to adjust the input level for each channel. (adjustable range: – ∞ to +9 dB, mid-position is about 0 dB) 12. Channel equalizer high-range adjust dial (HI) Use to adjust the treble (high-range) frequency sound for each channel.
11 30. Headphones level adjust dial (LEVEL) Adjusts the output level of the headphones jack. (adjustable range: – ∞ to 0 dB) 31. Headphones jack (PHONES) BPM counter section 32. Beat select buttons ( 2 BEAT 3 ) 3 (Beat up): Doubles the calculated BPM.
12 DISPLAY SECTION EFFECT SELECT CH SELECT P ARAMETER 1 2 3 4 MIC MST AUTO MIDI T AP BPM % A B 1 2 3 4 1. Effects display section The < EFFECT SELECT > indicator lights constantly, and the alpha-numeric display (seven characters in two lines) indicates the name of the effect as shown below.
13 BASIC OPERATIONS MIXER OPERATIONS 2 1 8 7 3 4 5 6 PO WER TRIM HI, MID, LO W BALANCE MASTER LEVEL 1. Set rear panel POWER switch to ON. 2. Set the input selector switch for the desired channel to choose the connected component.
14 7 Use the CROSS FADER curve switch to select the cross fader curve response. ¶ At the left setting, the curve produces a rapid signal rise. (As soon as the cross fader lever leaves the [ A ] side, the [ B ] channel sound is produced.
15 EFFECT FUNCTIONS This unit can produce beat effects linked to the BPM, and sound-color effects linked to the COLOR dials provided for each channel, for a total of 18 basic effects (including [ SND/RTN ]). In addition, by changing the parameters for each kind of effect, an extremely wide range of effect variations can be produced.
16 6. FILTER In units of 1/4, 1/2, 1/1, 2/1, 4/1, 8/1, 16/1, 32/1, or 64/1 beat, the filter frequency is moved, greatly changing the sound coloration. Example 1 cycle = 1/4, 1/2, 1/1, 2/1, 4/1, 8/1, 16/1, 32/1, or 64/1 beat Frequency 7.
17 PRODUCING BEAT EFFECTS EFFECT SELECT CH SELECT P ARAMETER 1 2 3 4 MIC MST AUTO MIDI TA P BPM % AB 1 4 2 3 5 TA P AUTO/T AP ON/OFF TIME LEVEL/DEPTH BEA T 2 , 3 Display example Effect Name: DELAY Eff.
18 TYPE OF SOUND-COLOR EFFECT 1. HARMONIC Detects deviation of the input sound from absolute pitch and automatically compensates to the nearest key. By rotating the dial, the pitch/key can be adjusted within a range of ±6 half-tones. COLOR HI LOW Input sound 3.
19 EFFECT PARAMETERS Beat Effect (*1) Sound-color effects Name 1 HARMONIC 2 SWEEP 3 CRUSH 4 FILTER Parameter (COLOR dial) Sets amount of pitch shift in range of ±6 half-tones. Rotating dial to right increases pitch shift by +6 half-tones, while rotating to the left reduces pitch shift by – 6 half-tones.
20 MIDI SETTINGS MIDI is an acronym for “ Musical Instrument Digital Interface ” and refers to a protocol developed for the exchange of data between electronic instruments and computers. A MIDI cable is used to connect components equipped with MIDI connectors to enable the transmission and receipt of data.
21 MIDI SETTINGS PROGRAM CHANGE SNAPSHOT Once the DJM-800 is setup with parameters for a given purpose, that set of parameters can be recorded as a snapshot. When snapshot of the current status is recorded, all messages for control change and program change are transmitted.
22 TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below . Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use.
23 SPECIFICATIONS 1. General Power source .............................................................. AC 120 V, 60 Hz Power consumption ..................................................................... 32 W Operating temperature ...............
24 Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pioneer DJM-800 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pioneer DJM-800 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pioneer DJM-800, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pioneer DJM-800 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pioneer DJM-800, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pioneer DJM-800.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pioneer DJM-800. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pioneer DJM-800 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
