Manuel d'utilisation / d'entretien du produit Xelsis EVO HD8953 du fabricant Philips Saeco
Aller à la page of 92
USER MANUAL PLEASE READ THIS USER MANUAL CAREFULL Y BEFORE USING THE MACHINE. Register y our product and get suppor t at w w w .philips .com/w elcome English T ype HD8953 / HD8954 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH Congratulations on y our purchase of a Saeco Xelsis EVO full automatic espresso machine! T o fully bene t from the support that Saeco o ers , please register your product at www .philips.com/w elcome . This user manual applies to HD8953 and HD8954.
3 ENGLISH ESPRESSO , AND ESPRESSO L UNGO BREWING ....................................................27 Espresso , and espresso lungo brewing using co ee beans ...................................................................... 27 Espresso , and espresso lungo brewing using pre-ground co ee.
4 ENGLISH IMPORT ANT Safety instructions This machine is equipped with safety featur es. Nev er theless read the safety instructions carefully and only use the machi- ne as described in these instructions to avoid ac cidental injur y or damage. Keep this user manual for futur e refer ence.
5 ENGLISH 5 • Remov e the mains plug from the w all socket: - If a malfunction occurs. - If the machine will not be used for a long time. - Before cleaning the machine. Pull on the plug , not on the mains cord . Do not touch the mains plug with wet hands .
6 ENGLISH • Alwa ys put the machine on a a t and stable sur face. • Do not place the machine on a hot plate , directly next to a hot ov en, heater or similar sour ce of heat. • Only put co ee beans into the co ee bean hopper . If ground c o ee, instan t co ee or any other substance is put in, it may damage the machine .
7 ENGLISH 7 C ompliance with standards The machine c omplies with ar t.13 of the Italian L egislative Decree dat ed 25 July 2005, no . 151 “Implementa tion of the directives 2005/95/EC, 2002/96/EC a.
8 INST ALLA TION Product overview 21/12/12 04:17 pm USER MENU BEVERAGE MENU SETTINGS MENU SELECT USER 22 23 21 25 24 35 34 33 32 26 27 29 30 28 28 28 31 36 28 37 38 39 12 3 4 5 6 7 8 9 10 11 12 13 20 .
9 ENGLISH 9 General description 1. Cup-warming sur face 2. Co ee bean hopper with lid 3. W ater tank + cov er 4. Pre-ground co ee compar tment 5. Ser vice door 6. Saeco Brewing Sy stem (SBS) dial knob 7. Hot water/steam wand 8. F ull drip tray indicator 9.
10 ENGLISH PREP ARING FOR USE Machine packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the pack aging material for possible future transport. Machine installation 1 Remove the drip tray with g rill from the packaging.
11 ENGLISH 11 5 Lift the left outer lid and remove the inner lid. 7 Rinse the water tank under fresh water . 8 Fill the tank with fr esh water up to the MA X level and re-inser t it into the machine.
12 ENGLISH 2.2.1. LINGUA IT ALIANO IT ALIANO CH ENGLISH DEUTSCH FRANÇAIS ESP AÑOL PORTUGUÊS ESC OK 2.2.1. LANGUAGE IT ALIANO IT ALIANO CH ENGLISH DEUTSCH FRANÇAIS ESP AÑOL PORTUGUÊS HEA TING UP … 11 Inser t the plug into the socket located on the back of the machine .
13 ENGLISH 13 RISCALDAMENTO ... RINSING STOP RINSING 21/12/12 04:17 pm USER MENU BEVERAGE MENU SETTINGS MENU SELECT USER USING THE MACHINE FOR THE FIRST TIME Automatic rinse/self-cleaning cycle When warm-up is completed, the machine automatically performs a rinse/ self-cleaning c ycle of the internal cir cuit with fresh water .
14 ENGLISH 21/12/ 1 04:17 p USER MENU SELECT USER USER MEN U SELE C USER 21/12/1 2 04:17 p m USER MENU SELECT USER INSERT GROUND COFFEE AND SELECT OK OK 2 Select the pre -ground co ee brewing function by pressing the “ ” button until this icon “ ” is display ed.
15 ENGLISH 15 8 Repeat the process from st ep 5 to step 7 until the water tank is empty . Then, continue with step 9. 9 At the end, ll the water tank again up to the MAX lev el.
16 ENGLISH 3 Check how many squar es have changed the colour to r ed and then consult the table. Note: The numbers on the water hardness test strip c orrespond to the water hardness adjustment settings.
17 ENGLISH 17 “INTENZA+” water lter installation W e recommend you to install the “INTENZA+” water lt er as this prevents lime scale to build up in your machine and preserves a more intense ar oma to your espresso c o ee. Y ou can purchase separately the INTENZA+ water lter .
18 ENGLISH 5 Fill the wat er tank up to MAX lev el with fresh water and reinsert it into the machine. 6 Place a large container (1,5 lt) under the hot water / st eam wand. 7 Press “ SET TINGS MENU ” butt on to access the machine main menu. 8 Press the “ ” button to select “ W A TER SETTINGS ”.
19 ENGLISH 19 11 Press the “ OK ” button to con rm that you want to start the lter activa- tion procedure . 12 Press the “ OK ” button to con rm that you have inserted the water lter and lled the wat er tank. 13 Press the “ OK ” button to con rm that a container is placed under the water dispensing spout.
20 ENGLISH ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best tasting co ee possible. User pro le selec tion This machine has been designed to acc ommodate the individual prefer en- ces and settings of up to 6 di erent users.
21 ENGLISH 21 5 The user has now been creat ed and can be selected from the main menu. 6 Select the desired user pro le b y pressing the “ SELECT USER ” button until the related icon is display ed. Then press “ BEVER A GE MENU ” to prog ram the beverage setting (see chapter Beverage P rogramming).
22 ENGLISH Saeco Adapting S ystem Co ee is a natural product and its characteristics may change accor ding to its origin, blend and roast. The machine is equipped with a self-adjusting system that allows the use of all types of co ee beans av ailable on the market (not for caramelized beans).
23 ENGLISH 23 2 Press and turn the g rinder adjustment knob one notch at a time. Y ou will taste the di erence after brewing 2-3 cups of espr esso. 3 The ref erence marks on the co ee bean hopper lid indicate the grind setting.
24 ENGLISH Adjusting the dispensing spout The height of the dispensing spout can be adjusted to better t the dimensions of the cups that you wish to use. Move the dispensing spout up or down with your ngers to adjust its height as shown in the image.
25 ENGLISH 25 The recommended positions ar e: F or the use of small cups; F or the use of large cups; F or the use of latte macchiato cups. Note: The dispensing spout can also be remov ed to allow the use of very large containers. T wo cups can be placed under the dispensing spout to br ew two cups of co ee at the same time .
26 ENGLISH Adjusting the co ee length The machine allows y ou to adjust the amount of brewed co ee or milk according to y our taste and the size of your cups . Each time one of the buttons “ ” and “ ” is pressed , the machi- ne brews a pre-set amount of product.
27 ENGLISH 27 ESPRESSO , AND ESPRESSO L UNGO BREWING Before br ewing co ee, make sure that ther e are no warnings shown on the display , and that the water tank and co ee bean hopper ar e lled. Espresso , and espresso lungo brewing using co ee beans 1 Place 1 or 2 cups under the dispensing spout.
28 ENGLISH Espresso , and espresso lungo brewing using pre- ground c o ee This function allows to use pre-ground and deca einated co ee. With the pre-ground co ee function you can only brew one co ee at a time. 1 T o select the pre -ground co ee function, press the “ ” butt on until this icon “ ” is display ed.
29 ENGLISH 29 6 Press “ OK ” to con rm and star t brewing. 7 After the pre-brewing cycle, co ee begins to pour out of the dispen- sing spout. 8 Co ee brewing st ops automatically when the pre-programmed level is reached; it is possible to stop earlier by pressing the “ ST OP COFFEE ” button.
30 ENGLISH MILK CARAFE This chapter explains how to use a milk caraf e to prepare a cappuc cino, latte macchiato or hot milk. Note: Before using the milk caraf e, clean it thoroughly as described in the chap- ter “ Cleaning and Maintenance” chapter .
31 ENGLISH 31 4 Place back the lid and close the milk carafe dispenser by turning it counter clockwise. The milk carafe is now r eady to use. Inserting the milk carafe 1 Slightly tilt the milk carafe and then insert the front part into the ma- chine. C D A B B 2 At this stage the carafe holes ( A) are low er than the couplings (C).
32 ENGLISH 3 Push the carafe t owards the bottom while r otating at the same time, until it is locked at the (external) drip tray (E). Caution: Do not use force while inserting the caraf e. Removing the milk caraf e 1 Close the milk carafe dispenser by turning it count er clockwise.
33 ENGLISH 33 Emptying the milk carafe 1 Open the milk carafe dispenser by turning it clockwise. 3 Lift the lid. Empty the milk carafe and clean it properly . Note: After each use, clean the milk carafe as described in the “Cleaning and Maintenance ” chapter .
34 ENGLISH CAPPUCCINO BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Risk of burning. Never seize the car afe handle during the cleaning cycle: risk of scal- ding! W ait until the end of the cycle befor e removing the milk caraf e.
35 ENGLISH 35 5 Press the “ ” button to start the brewing process . 6 The machine is heating up . Note: The machine requires mor e waiting time for heating up if the “ EC OMODE ” is activated. If the “ F AST MILK ” button is pressed , the “ EC OMODE ” function is deactiva- ted and set to “ OFF ” .
36 ENGLISH Adjusting the cappuccino length Each time the “ ” button is pressed, the machine brews a pr e -set quan- tity of cappuccino into the cup. The machine allows y ou to adjust the amount of cappuccino according t o your taste and the size of y our cups.
37 ENGLISH 37 5 When the machine shows this display , it star ts to pour milk froth into the cup. P ress “ ST OP MILK ” as soon as the desired amount of milk is reached. 6 Once the milk froth has been poured , the machine starts brewing co ee .
38 ENGLISH 2 Place back the milk carafe lid and insert the carafe into the machine. 3 Place a cup under the co ee dispensing spout. 4 Open the milk carafe dispenser by turning it clockwise.
39 ENGLISH 39 6 The machine is heating up . Note: The machine requires mor e waiting time for heating up if the “ EC OMODE “ is activated. If the “ F AST MILK ” button is pressed , the “ EC OMODE ” function is deactivated and set to “ OFF ” .
40 ENGLISH Adjusting the latte mac chiato length Each time the “ ” button is pressed, the machine brews a pr e -set quantity of latte macchiato into the cup . The machine allows you t o adjust the amount of latte macchiato accor ding to your taste and the size of y our cup.
41 ENGLISH 41 CAFFELA TTE BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Risk of burning. Never seize the car afe handle during the cleaning cycle: risk of scal- ding! W ait until the end of the cycle befor e removing the milk caraf e.
42 ENGLISH ERAGE MENU T TINGS MENU CAFFELA TTE STOP MILK CAFFELA TTE MORE MILK CAFFELA TTE STOP COFFEE 5 Press the “ ” button to start the brewing process . 6 The machine is heating up . Note: The machine requires mor e waiting time for heating up if the “ EC OMODE ” is activated.
43 ENGLISH 43 9 Remove the cup and close the milk dispenser by turning it c ounter clockwise. 10 W ait a few seconds. The carafe starts the automatic cleaning process (see the Cleaning and Maintenance chapter). 11 When the cleaning cycle is nished , remove the milk caraf e and put it in the refrigerator .
44 ENGLISH CAFFELA TTE STOP COFFEE MEMO 6 Once the milk froth has been poured , the machine starts brewing co ee . When the desired co ee quantity is reached, pr ess the “ST OP C OFFEE” button. Now the “ ” button is prog rammed. Each time it is pressed, the ma- chine will brew the same amount that was just programmed .
45 ENGLISH 45 Hot milk W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Risk of burning. Never seize the car afe handle during the cleaning cycle: risk of scal- ding! W ait until the end of the cycle befor e removing the milk caraf e.
46 ENGLISH Steam dispensing W arning: Danger of scalding! Dispensing may be prec eded by short sprays of hot water and steam. Risk of burning . Do not touch the hot w ater/ste- am wand with bare hands. 1 Place a container under the hot water/steam wand .
47 ENGLISH 47 American co ee 1 Place the cup under the dispensing spout. 2 Press the “ ” button to ent er the “ SPECIAL BEVERAGES ” menu. USER MEN U SELE C USER SPECIAL BEVERAGES ESPRESSO MACCHIA TO M AMERICAN COFFEE T K AMERICAN COFFEE 3 Press the butt on “ AMERICAN C OFFEE ” button to start the preparation.
48 ENGLISH USER MEN U SELE C USER SPECIAL BEVERAGES ESPRESSO MACCHIA TO M AMERICAN COFFEE T K Espresso Macchiato W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam.
49 ENGLISH 49 USER MEN U SELE C USER HOT W A TER HEA TING UP … STOP HOT W A TER HO T W A TER DISPENSING W arning: danger of burns! Dispensing may be prec eded by small jets of hot water . The steam/hot water wand may reach high temper atures: nev er touch it with bare hands.
50 ENGLISH BEVERAGE PROGRAMMING Y ou can program the machine to optimiz e the co ee taste to your personal prefer ences. F or each beverage it is possible to customize the settings. 1 Press the “ BEVERAGE MENU ” button to acc ess the beverage main menu.
51 ENGLISH 51 PREBREWING COFFEE TEMPERA TURE This setting enables the pre-brewing function. During pre -brewing the co ee is slightly dampened t o bring out the aroma in full. : prewbrewing function is active. : prebrewing function is longer in order to bring out the c o ee taste.
52 ENGLISH F or each beverage it is possible to reset the original factory settings. After selecting this function, the customized settings are deleted. T o exit programming, pr ess the “ ESC ” button one or more times until the main menu is displayed.
53 ENGLISH 53 RESTORE DEF AUL T VAL UES WA TER LENGHT By adjusting the bar on the display by pressing the “ ” or “ ” scrolling button, you can choose the quantity of hot water to be dispensed. Press “ OK ” to con rm the adjustment. MACHINE PROGRAMMING The machine allows y ou to customize the machine settings.
54 ENGLISH General settings The general settings allow you to change the operation settings . GENERAL SETTINGS CUP W ARMER ECOMODE FUNCTION AC OUSTIC TONE This function allows you to switch on/o the warming function of the cup- warming sur face located on the upper part of the machine.
55 ENGLISH 55 Display settings The display settings allow y ou to set the language and the display bright- ness. DISPLA Y SETTINGS LANGUAGE BRIGHTNESS This setting is important to automatically adjust the parameters of the machine according to y our country.
56 ENGLISH CALENDAR SETTINGS TIME DA TE ST AND-BY SETTINGS Calendar settings This function allows you to set time , calendar , stand-by time and power-on timer .
57 ENGLISH 57 CALENDAR SETTINGS POWER-ON TIMER TIMER 1 00:00 TIMER 2 00:00 TIMER 3 00:00 HOUR 0 0 MINUTES 0 0 DA Y OF THE WEEK The power-on timer function automatically activates the machine at the weekday and time selected by you . The machine performs this function only if the power button is switched t o on.
58 ENGLISH W ater settings The W A TER SETTINGS allow adjusting the water parameters for optimal co ee. WA TER SETTINGS WA TER HARDNESS ENABLE FIL TER ACTIVA TE FIL TER Under “ W A TER HARDNESS ” , you can set the level of water hardness.
59 ENGLISH 59 Maintenance settings The MAINTENANCE SETTINGS allow setting all the functions for correct machine maintenance. MAINTENANCE SETTINGS PRODUCT COUNTERS DESCALING C YCLE BREW GROUP CLEANING .
60 ENGLISH CLEANING AND MAINTENANCE Daily cleaning of the machine Caution: Timely cleaning and maintenanc e of your machine is v ery impor tant as it prolongs the life of y our machine.
61 ENGLISH 61 3 Empty the co ee grounds drawer and wash it with fr esh water . 4 Empty and wash the (internal) drip tray and the cover with fr esh water . 5 Correctly reinstall all the components . 6 Inser t the tray and the co ee gr ounds drawer and close the service door .
62 ENGLISH Daily cleaning of the milk carafe: A UTO CLEAN cycle (after each use) After each brewing of a milk beverage the machine performs an automatic cleaning cycle by routing shots of steam through the milk dispenser . This cycle may also be manually activated by pressing the “ ” button on the control panel.
63 ENGLISH 63 3 Remove the grill and wash it thor oughly . 4 Remove the support under the grill. W ash the support and the drip tray . 5 Dry, reassemble and r einsert it in the machine. 6 Remove the dispensing spout and wash it with water . 7 Clean the pre- ground c o ee compar tment with a brush or a dry cloth.
64 ENGLISH 8 Clean the hot water/steam wand and the display with a dry cloth. W eek ly cleaning of the milk carafe The weekly cleaning is more thorough as it r emoves any milk r esidues from the milk dispenser of the carafe. 1 The carafe must be r emoved from the machine and emptied bef ore cleaning.
65 ENGLISH 65 5 Remove the connector which is in contact with the machine. 6 Remove the handle with the suction tube. 7 Remove the suction tube. Note: Make sure the suction tube is fully inser ted. If it is not tted up to its limit, the carafe might not operate corr ectly since no milk is sucked.
66 ENGLISH W eek ly cleaning of the brew group The brew gr oup should be cleaned every time the co ee bean hopper is lled or at least onc e a week. 1 Press the butt on and open the service door . 2 Remove the (internal) drip tra y and co ee grounds draw er .
67 ENGLISH 67 8 Gently pull down the lever until it is in contact with the brew gr oup base and the two refer ence signs on the side of the brew gr oup do match. 9 Make sure the hook to lock the brew gr oup is in the correct position by rmly pressing the “PUSH” button until you hear a click.
68 ENGLISH Monthly cleaning of the milk caraf e In the monthly cleaning cycle we use the Saeco Milk Circuit Cleaner to keep the entire circuit clean of milk residues . Y ou can purchase separately the Milk Circuit Cleaner . Please refer to the maintenance products page for further details.
69 ENGLISH 69 6 Put the lid back on. 7 Rotate the milk dispenser counter-clockwise to the lock position. 8 Inser t the milk carafe into the machine . 9 Place a large container (1,5 lt ) under co ee the dispensing spout. Open the milk dispenser by turning it clockwise.
70 ENGLISH 10 Press the “ OK ” button to start the cycle. The machine starts dispensing the cleaning solution through the milk dispenser . 11 This icon is display ed. The bar shows the cycle progress. W arning: Never drink the solution dispensed during the proc edure.
71 ENGLISH 71 16 The machine starts dispensing water from both the co ee and the milk dispensing spout. The bar shows the cycle prog ress. 17 At the end of the cycle, the machine returns t o the product brew menu page. 18 Disassemble and wash the milk carafe as described in the “Weekly cleaning of the milk carafe ” chapter .
72 ENGLISH 2 Lubricate the shaft too . 3 Inser t the brew gr oup in its seat until it locks into place (see “Weekly Cleaning of the Brew Group ” chapter).
73 ENGLISH 73 3 Press the “ OK ” button to con rm. 4 Fill the wat er tank with fresh water up to the MA X level. P ress the “ OK ” button. 5 Put a “Co ee Oil Remover” tablet in the pre- ground c o ee com- partment. Press the “ OK ” button.
74 ENGLISH 7 This icon is display ed. The bar shows the cycle progress. W arning: Never drink the solution dispensed during the proc edure. 8 When the machine stops dispensing, r emove and empty the container . 9 Clean the brew group as described in the chapt er “Weekly Cleaning of the Brew Group .
75 ENGLISH 75 DESCALING The descaling process takes appr ox. 35 minutes. Lime scale builds up inside the machine during use. It needs to be remo- ved regularly as it may clog the wat er and co ee circuit of your machine. The machine indicates when descaling is needed.
76 ENGLISH 4 Remove the water tank, and if installed, remo ve the INTENZA+ water lt er . Pour the entire content of the Saeco decalci er . Then ll the wat er tank with fresh water up to the MA X level. P ress the “ OK ” button. 5 Empty the (internal) / (external) drip tray .
77 ENGLISH 77 FILL THE CARAFE HALFWA Y WITH FRESH W A TER AND INSERT IT IN BREWING POSITION OK 10 Empty the (internal) drip tray and place it back. Then, press the “ OK ” button. 11 Empty the milk carafe and ll it with fresh water . I nsert it back in the machine.
78 ENGLISH 19 The descaling cycle is now complete . Note: At the end of the descaling cycle, wash the brew g roup as described in the “Weekly Cleaning of the Brew Group ” chapter . The rinsing cycle is per formed in or der to have the cir cuit cleaned with a preset amount of water to ensur e proper machine performance.
79 ENGLISH 79 MEANING OF THE DISPLA Y Help Message Displayed Meaning of the message CLOSE HOPPER DOOR Close the bean hopper inner cover . ADD COFFEE Fill the c o ee beans hopper . INSERT BREW GROUP The brew gr oup must be inserted into the machine.
80 ENGLISH Help Message Displayed Meaning of the message ESC ROT A TE THE MILK CARAFE DISPENSING SPOUT INTO BREWING POSITION Open the milk dispenser of the carafe to brew pr oducts.
81 ENGLISH 81 TROUBLESHOOTING This chapter summarizes the most common pr oblems you could en- counter with your machine . If you are unable to solve the pr oblem with the information below , visit w ww .philips.com/support for a list of frequently asked questions or contact the Philips Saeco hotline in your country.
82 ENGLISH Machine actions Causes Solutions The machine takes a long time to warm up or the amount of water dis- pensed from the wand is too little. The machine circuit is clogged by limescale. Descale the machine. The brew gr oup cannot be removed . The brew gr oup is out of place.
83 ENGLISH 83 Machine actions Causes Solutions The machine grinds the co ee beans but no c o ee comes out. (See note) There is no water . Fill the wat er tank and prime the circuit (please refer to chapt er “Manual rinse cycle”). The brew gr oup is dirt y .
84 ENGLISH ENERGY SA VING Stand-by The Saeco full automatic espresso machine is desig ned for energy saving- proven b y the Class A energy label. After a certain time of inac tivity that can be programmed individually (see chapter “Machine Pr ogramming”), the machine turns o automatically .
85 ENGLISH 85 Disposal Do not throw awa y the machine with the normal household waste at the end of its life, but hand it in at an o cial collection point for recycling. By doing this, you help to pr eserve the environment. - The packing materials can be recycled.
86 ENGLISH TECHNICAL SPECIFICA TION The manufacturer reserves the right to make changes to the technical speci cations of the pr oduct Nominal V oltage - Pow er Rating - Po wer Supply See label on .
87 ENGLISH 87 ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenance pr oducts only. Y ou can purchase these at the Philips online shop at www.
88 ENGLISH - Maintenance Kit CA 6706 - Milk Circuit Cleaner CA6705.
89.
w w w .philips.com/saeco The manufacturer reserves the right to make changes without prior notice. Rev .00 del 15-01-13 EN 02 02.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Philips Saeco Xelsis EVO HD8953 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Philips Saeco Xelsis EVO HD8953 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Philips Saeco Xelsis EVO HD8953, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Philips Saeco Xelsis EVO HD8953 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Philips Saeco Xelsis EVO HD8953, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Philips Saeco Xelsis EVO HD8953.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Philips Saeco Xelsis EVO HD8953. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Philips Saeco Xelsis EVO HD8953 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
