Manuel d'utilisation / d'entretien du produit C2924M-A (5/05) 3 du fabricant Pelco
Aller à la page of 44
INSTALLATION/OPERATION CCC1390H Series Camera C2924M-A (5/05).
.
C2924M-A (5/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warnings .
4 C2924M-A (5/05) Pixel Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 System Information .
C2924M-A (5/05) 5 List of Illustrations 1 CCC1390H Series Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 DC-Drive Auto Iris Lens Connector .
6 C2924M-A (5/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C2924M-A (5/05) 7 Description The CCC1390H Series camera is a compact, wide dynamic range (WDR), day/night camera. Its WDR technology provides up to 60 dB of dynamic range and produces superior images over a wide range of lighting conditions, including extreme backlight conditions.
8 C2924M-A (5/05) Figure 1. CCC1390H Series Camera MODELS CCC1390H-6 1/3-inch high resolution day/night, WDR, CCD camera, 24 V AC or 12 VDC, NTSC format CCC1390H-6X 1/3-inch high resolution day/night,.
C2924M-A (5/05) 9 PARTS LIST CCC1390H Series camera Quick Start Guide Safety Instructions External control connector assembly: seven-pin micro (1.25 mm) connector with wires (26 AWG) and connector cover Camera mount spacer Four -pin auto iris connector (type DN-152N) Lens mount cap Resource CD: • Installation/Operation manual: INST ALL.
10 C2924M-A (5/05) Lens Mounting The CCC1390H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. It automatically senses an auto iris lens as soon as you plug in the connector . The camera has a standard CS-mount that can accept a C-mount lens with a PCMA40 lens adapter .
C2924M-A (5/05) 11 MOUNTING THE LENS To mount the lens onto the camera (refer to Figure 3): 1. Make sure the lens will not touch the camera imager when installed. 2. Use clean, compressed air or a clean, dry lens cloth to make sure there is no dust or other foreign matter between the lens and the camera imager .
12 C2924M-A (5/05) Camera Mounting The CCC1390H Series camera can be mounted from either the top or bottom, depending on the type of camera mount used in your installation. Use a standard 1/4-20 screw . The maximum thread depth (top) is 0.188 inches (4.
C2924M-A (5/05) 13 Connecting Power , V ideo, and Control The CCC1390H Series camera offers standard power and coax video connectors as well as an external control connector . Before installation, identify how you will connect each power , video, and control lead to the camera.
14 C2924M-A (5/05) CONNECTING AC POWER The CCC1390H Series camera requires a power supply of 24 V AC ±15% (20.4 to 27.6 V AC), 50/60Hz. Make sure the power supply has a minimum rating of 270 mA.
C2924M-A (5/05) 15 CONNECTING DC POWER The CCC1390H Series camera requires a power supply of 12 VDC ±15% (10.2 to 13.8 VDC). Make sure the power supply has a minimum rating of 390 mA. To connect DC power: 1. Strip at least 0.4 inches (10 mm) of the insulation from each power wire.
16 C2924M-A (5/05) CONNECTING EXTERNAL CONTROL The external control connector on the rear panel lets you remotely access and control the CCC1390H Series camera. The external control connector assembly is a seven-pin micro (1.25 mm) connector with wires (26 AWG) and connector cover .
C2924M-A (5/05) 17 CONNECTING SERIAL CONTROL (PELCO D/PELCO P) To connect serial control to the camera (refer to Figure 7): 1. T urn off power to the camera. 2. If necessary , use a small Phillips screwdriver to remove the connector cover from the rear panel (refer to Figure 6).
18 C2924M-A (5/05) 7. If you are not connecting additional cameras, or after adding all cameras to the chain, make sure you set the termination switch to ON for the last camera in the chain. 8. Access the CAMERA SETUP menu to set the following (refer to Camera Setup): • Set a unique ADDRESS for each camera on the serial chain.
C2924M-A (5/05) 19 4. Use 100-ohm twisted pair cabling to wire the device to the enclosed connector assembly . The decision to use shielded cable depends on your installation; shielded cable may be optional. Figure 8. Day/Night Filter Control Configuration 5.
20 C2924M-A (5/05) Quick Setup Several CCC1390H Series camera settings can be changed directly from the rear panel button. When a rear panel indicator is lit, the correspond- ing option is enabled. Y ou can change the following options directly from the rear panel: AGC Press the button up to enable or disable automatic gain control (AGC).
C2924M-A (5/05) 21 Accessing Setup Menus NAVIGATING SETUP MENUS FROM THE REAR PANEL Y ou can use the five-position button on the rear panel to access and navigate the setup menus (refer to Figure 10). Figure 10. Rear Panel Indicators and Presses T able E lists the button presses for each menu action.
22 C2924M-A (5/05) NAVIGATING SETUP MENUS FROM A PELCO CONTROLLER USING PRESET 95 TO ACCESS SETUP MENUS Y ou can use preset 95 to access and navigate the setup menus from various Pelco controllers. Use the instructions for your controller to access the main menu.
C2924M-A (5/05) 23 NAVIGATING SETUP MENUS As soon as you access the MAIN MENU, the four indicators on the rear panel blink until you close the setup menu. T able F lists the buttons and actions for menu navigation. NOTE: If your Pelco controller does not have a joystick, use the up, down, right, and left buttons.
24 C2924M-A (5/05) Setup Menus The CCC1390H Series camera uses setup menus instead of hardware switches for configuring the camera. As a result, you have more options for customizing the camera for its specific application. NOTES: • After you customize any aspect of the CCC1390H Series camera, be sure to save your custom settings.
C2924M-A (5/05) 25 LINE SYNC LINE SYNC > AUTO V-PHASE ADJ > BACK EXIT V-PHASE ADJ PHASE VALUE = 45 MANUAL RED/BLUE RED GAIN > -1 BLUE GAIN > -2 RED HUE > 1 BLUE HUE > 1 BACK EXIT SHA.
26 C2924M-A (5/05) MAIN MENU The following sections describe each menu and all settings associated with that menu. The sample screens in each section show the default settings. To display the MAIN MENU: • Press and hold the center of the button on the rear panel.
C2924M-A (5/05) 27 T able G shows the default camera settings for each profile. Figure 11 shows sample scenes for each camera profile. Figure 11. Sample Profile Scenes SAVE AS Use this option to save all settings from the <HOLD> profile into the CUSTOM profile.
28 C2924M-A (5/05) EXPOSURE SETTINGS Select this option to configure the exposure settings for the CCC1390H Series camera. The default EXPOSURE SETTINGS menu appears when AUTO EXPOSURE is set to NORMAL, BLC, or WDR. When AUTO EXPOSURE is set to MANUAL, the FLICKERLESS option is replaced with the SHUTTER SPEED option.
C2924M-A (5/05) 29 SHUTTER SPEED Use this option to set the shutter speed manually . Select one of the following options: 1/60(NTSC), 1/50(P AL), 1/100(NTSC), 1/120(P AL), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/50000. The default is 1/60(NTSC) or 1/50(P AL).
30 C2924M-A (5/05) DAY AND NIGHT DETECTION The camera regularly checks the brightness level. When the brightness level crosses the switch threshold and lasts longer than the D&N DETECTION setting, the camera switches the filter .
C2924M-A (5/05) 31 FUNCTION SETTINGS Select this option to configure the function settings for the CCC1390H Series camera. LINE SYNCHRONIZATION Use line synchronization to eliminate the vertical roll that occurs when multiple cameras are connected to the same switching device.
32 C2924M-A (5/05) MANUAL RED/BLUE Select this option to display the MANUAL RED/BLUE menu. Red Gain Use this option to either increase or decrease the light level of the red elements in the camera image. Select a value between -5 and 5. The default is -1.
C2924M-A (5/05) 33 MASKING Masking lets you block out certain areas of a camera scene. Select this option to configure one to eight masks in the camera image. NOTE: When you enable masking, electronic zoom is disabled. If electronic zoom is active, masking is disabled.
34 C2924M-A (5/05) 5. T o clear a character , select BS (backspace). The camera deletes the last character entered. 6. Repeat steps 3 and 4 until you have entered the camera title. 7. When the title is correct, select BACK to return to the TITLE menu.
C2924M-A (5/05) 35 PIXEL CORRECTION If white spots appear in the video image, one or more pixels on the camera imager may be defective. This condition is common to CCD camera imagers. Select this option to automatically detect and correct these defects.
36 C2924M-A (5/05) Lens Focusing After mounting the lens, you must focus your CCC1390H Series camera. Y ou will adjust both the back focus (on the camera) and the fine focus (on the lens). NOTE: The back focus has already been adjusted using a standard CS-mount lens.
C2924M-A (5/05) 37 6. V arifocal lens only: a. Set the varifocal to wide (W) and the lens focal length to far ( ∞ ). b. Adjust the back focus: (1) Use a 1.5-mm Allen wrench to loosen the back focus locking screw . (2) T urn the lens until the image is focused.
38 C2924M-A (5/05) Camera Synchronization Camera synchronization may affect installations that use two or more AC power supplies for multiple cameras. Due to different power phases, a brief vertical roll may appear on the monitor when switching between cameras.
C2924M-A (5/05) 39 Manual White Balance Calibration In some installations, use manual white balance to render the most accurate image color possible. Mixed color applications may affect the amount of color adjustment. For example, a small white object on a large blue surface may have a reddish tint.
40 C2924M-A (5/05) Specifications GENERAL Day/Night Operation Day Infrared (IR) cut filter Night BK-7 glass, same optical displacement as day Imaging Device 1/3-inch image format Sony SS-2WD CCD Dynamic Range 60 dB maximum (WDR mode) Picture Elements NTSC 768 (H) x 494 (V) (approx.
C2924M-A (5/05) 41 ELECTRICAL Power Requirements CCC1390H-6 24 V AC ±15%/12 VDC ±15%, 60 Hz CCC1390H-6X 24 V AC ±15%/12 VDC ±15%, 50 Hz Power Consumption 3.
.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pelco C2924M-A (5/05) 3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pelco C2924M-A (5/05) 3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pelco C2924M-A (5/05) 3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pelco C2924M-A (5/05) 3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pelco C2924M-A (5/05) 3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pelco C2924M-A (5/05) 3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pelco C2924M-A (5/05) 3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pelco C2924M-A (5/05) 3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
