Manuel d'utilisation / d'entretien du produit X99-E WS du fabricant Asus
Aller à la page of 188
Motherboard X99-E WS.
ii E9552 First Edition August 2014 Copyright© 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitt.
iii Contents Safety information ..................................................................................................... vii About this guide ................................................................................................
iv Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................ 3-1 3.2 BIOS setup program .................................................................................. 3-2 3.
v Chapter 4: Software support 4.1 Installing an operating system ................................................................. 4-1 4.2 Support DVD information .......................................................................... 4-1 4.2.1 Running the support DVD .
vi 6.2 NVIDIA ® SLI™ technology ......................................................................... 6-7 6.2.1 Requirements .............................................................................. 6-7 6.2.2 Installing two SLI-ready graphics cards .
vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
ix Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
x (continued on the next page) X99-E WS specifications summary CPU LGA2011-v3 socket for the Next Generation Intel ® Core™ i7 processors Supports 22nm CPU, up to 20 MB Smart Cache* Supports Intel ® Turbo Boost Technology 2.0* * The Intel ® Turbo Boost Technology 2.
xi (continued on the next page) X99-E WS specifications summary LAN 1 x Intel ® I210-AT Gigabit LAN controller 1 x Intel ® I218-LM Gigabit LAN-Dual interconnect between the integrated LAN controller.
xii (continued on the next page) ASUS Exclusive Features EPU - EPU, EPU switch ASUS Fan Xpert3 - Featuring Fan Auto Tuning function and multiple thermistors selection for optimized system cooling control. Turbo App - Featuring automatic system performance tuning, network priority, and audio scene conguration for selected applications.
xiii (continued on the next page) X99-E WS specifications summary ASUS Exclusive Features - ASUS O.C. Tuner - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 Q-Design - ASUS Q-Code - ASUS Q-Shield - ASUS Q-LE.
xiv Specications are subject to change without notice. Internal I/O Connectors 1 x EPU switch 1 x EZ XMP switch 1 x Power-on button 1 x Reset button 1 x 3-pin Chassis intrusion (CHASSIS) connector System Panel (Q-Connector) BIOS features 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.
xv • If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product specications may vary with different models.
xvi Installation tools and components The tools and components in the table above are not included in the motherboard package. PC chassis Power supply unit Intel ® LGA2011-v3 compatible CPU Fan Intel.
ASUS X99-E WS 1-1 Chapter 1 Product introduction 1 1.1 Special features 1.1.1 Product highlights LGA2011-v3 socket for Intel ® Core™ i7 processors This motherboard supports Intel ® Core™ i7 processors in the LGA2011-v3 package. It provides great system performance, quad-channel DDR4 memory slots and PCI Express 2.
1-2 Chapter 1: Product introduction Chapter 1 Complete USB 3.0 integration This motherboard offers you the strategic USB 3.0 accessibility for both the front and rear panels, allowing you to experience the convenience of the latest plug and play connectivity solution at speed up to ten times faster than USB 2.
ASUS X99-E WS 1-3 Chapter 1 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1-4 Chapter 1: Product introduction Chapter 1 Refer to 1.2.9 Internal connectors and 2.4.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
ASUS X99-E WS 1-5 Chapter 1 Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. DDR4 DIMM slots 1-7 2. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 8-pin EATX12V1; 6-pin EATX12V_1) 1-32 3.
1-6 Chapter 1: Product introduction Chapter 1 1.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA2011-v3 socket designed for Intel ® Core™ i7 processors. • Ensure that all power cables are unplugged before installing the CPU.
ASUS X99-E WS 1-7 Chapter 1 Recommended memory configurations 1.2.4 System memory The motherboard comes with eight DDR 4 (Double Data Rate 4) Quad Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module.
1-8 Chapter 1: Product introduction Chapter 1 • You may install varying memory sizes in Channel A, Channel B, Channel C, and Channel D. The system maps the total size of the lower-sized channel for the dual- channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
ASUS X99-E WS 1-9 Chapter 1 1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 40-LANE 28-LANE 1 PCIe 3.0/2.
1-10 Chapter 1: Product introduction Chapter 1 • We recommend that you provide sufcient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment.
ASUS X99-E WS 1-11 Chapter 1 A B C D E F G H PCIe x16_1 shared – – – – – – – PCIe x16_2 – shared – – – – – – PCIe x16_3 – shared – – – – – – PCIe x16_4 shared.
1-12 Chapter 1: Product introduction Chapter 1 1.2.6 Onboard buttons and switches Onboard buttons and switches allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
ASUS X99-E WS 1-13 Chapter 1 3. MemOK! button Installing DIMMs that are not compatible with the motherboard may cause system boot failure, and the DIAG_DRAM LED near the MemOK! button lights continuously. Press and hold the MemOK! button until the DIAG_DRAM LED starts blinking to begin automatic memory compatibility tuning for successful boot.
1-14 Chapter 1: Product introduction Chapter 1 4. TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance. • Enable this switch when the system is powered off.
ASUS X99-E WS 1-15 Chapter 1 5. EPU switch Enable this switch to automatically detect the current PC loadings and intelligently moderate the power consumption. Enable this switch when the system is powered off. • The EPU LED (O2LED3) near the EPU switch lights up when you enable the EPU switch.
1-16 Chapter 1: Product introduction Chapter 1 6. Clear CMOS button (CLR_CMOS) Press this button to clear the BIOS setup information only when the systems hangs due to overclocking. 7. Dr. Power switch (DR_POWER) This switch allows you to enable or disable the ASUS Dr.
ASUS X99-E WS 1-17 Chapter 1 8. EZ XMP switch Enable this switch to overclock the installed DIMMs, allowing you to enhance the DIMM’s speed and performance. The EZ XMP LED (XLED1) lights up when you enable the EZ XMP switch. For the location of the EZ XMP LED, refer to section 1.
1-18 Chapter 1: Product introduction Chapter 1 1.2.7 Jumpers 1. CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a exible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3.
ASUS X99-E WS 1-19 Chapter 1 1.2.8 Onboard LEDs 1. Diagnosis LEDs The Diagnosis LEDs provide the status of these key components during POST (Power- On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component’s LED stays lit up until the problem is solved.
1-20 Chapter 1: Product introduction Chapter 1 3. EPU LED (O2LED3) The EPU LED lights up when the EPU switch is enabled. 4. EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch.
ASUS X99-E WS 1-21 Chapter 1 5. ASUS Dr. Power LED (PGLED3) This LED near the Dr. Power switch lights up when the Dr. Power switch is enabled. 6. PWR_SUPPLY LED The ASUS Dr. Power LED near the EATX PWR connector lights up when the ASUS Dr. Power switch setting is on and the power supply unit has failed.
1-22 Chapter 1: Product introduction Chapter 1 7. Power LED (+12V_PWR LED) The Power LED near the EATX12V1 connector lights up when you enable the ASUS Dr. Power switch and if there is no power detected on the 8-pin EATX12V connector. 8. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status.
ASUS X99-E WS 1-23 Chapter 1 Q-Code table (continued on the next page) Code Description 00 Not used 02 microcode 03 CACHE_ENABLED 04 PCH initialization 06 CPU_EARLY_INIT 10 PEI Core is started 11 – .
1-24 Chapter 1: Product introduction Chapter 1 Code Description F A Invalid recovery capsule FB – FF Reserved for future AMI error codes 60 DXE Core is started 61 NVRAM initialization 62 Installatio.
ASUS X99-E WS 1-25 Chapter 1 Code Description AC Reserved for ASL (see ASL Status Codes section below) AD Ready To Boot event AE Legacy Boot event AF Exit Boot Services event B0 Runtime Set Virtual Ad.
1-26 Chapter 1: Product introduction Chapter 1 1.2.9 Internal connectors 1. ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12/SATAEXPRESS_E1) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. • ASMedia storage controller can only support AHCI mode.
ASUS X99-E WS 1-27 Chapter 1 3. Intel ® X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34, SATA6G_56/SATAEXPRESS_1, SATA6G_78, SATA6G_910) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables.
1-28 Chapter 1: Product introduction Chapter 1 4. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
ASUS X99-E WS 1-29 Chapter 1 6. USB 3.0 connectors (20-1 pin USB3_E910, USB3_E78) These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benets of USB 3.
1-30 Chapter 1: Product introduction Chapter 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
ASUS X99-E WS 1-31 Chapter 1 8. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-4) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
1-32 Chapter 1: Product introduction Chapter 1 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W. • DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug.
ASUS X99-E WS 1-33 Chapter 1 • SystempowerLED(2-pinPLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
1-34 Chapter 1: Product introduction Chapter 1 11. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certicates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity.
ASUS X99-E WS 1-35 Chapter 1 13. Thunderbolt header (5-pin TB_HEADER) This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain conguration.
1-36 Chapter 1: Product introduction Chapter 1 15. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector.
ASUS X99-E WS 1-37 Chapter 1 16. T_Sensor connector (2-pin T_SENSOR1) This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard’s critical components and connected devices. The thermistor cable is purchased separately.
1-38 Chapter 1: Product introduction Chapter 1.
ASUS X99-E WS 2-1 Chapter 2 Basic installation 2 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models.
2-2 Chapter 2: Basic installation Chapter 2 3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
ASUS X99-E WS 2-3 Chapter 2 2.1.2 CPU installation Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down.
2-4 Chapter 2: Basic installation Chapter 2 Triangle mark Triangle mark.
ASUS X99-E WS 2-5 Chapter 2 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary.
2-6 Chapter 2: Basic installation Chapter 2 To remove a DIMM 2.1.4 DIMM installation.
ASUS X99-E WS 2-7 Chapter 2 2.1.5 ATX Power connection OR OR.
2-8 Chapter 2: Basic installation Chapter 2 2.1.6 SATA device connection OR.
ASUS X99-E WS 2-9 Chapter 2 2.1.7 Front I/O Connector To install ASUS Q-Connector USB 2.0 AAFP To install USB 2.0 connector To install front panel audio connector USB 3.
2-10 Chapter 2: Basic installation Chapter 2 2.1.8 Expansion Card installation To install PCIe x16 cards.
ASUS X99-E WS 2-11 Chapter 2 2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system.
2-12 Chapter 2: Basic installation Chapter 2 Q-Code Logger button Q-Code Logger port 2.3 Q-Code Logger utility 2.3.1 Using the Q-Code Logger Q-Code Logger allows you to easily check Q-Code event logs without opening the system’s case. To use the Q-Code Logger: 1.
ASUS X99-E WS 2-13 Chapter 2 2.4 Motherboard rear and audio connections 2.4.1 Rear I/O connection * and **: Refer to the tables on the next page for the LAN port LEDs and audio port definitions. Rear panel connectors 1. Q-Code Logger button 7. USB 3.0 ports E34 (Supports USB 3.
2-14 Chapter 2: Basic installation Chapter 2 • ThepluggedUSB3.0devicemayrunonxHCImodeorEHCImode,dependingonthe operating system’s setting. • USB3.0devicescanonlybeusedasdatastorageonly.
ASUS X99-E WS 2-15 Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers 2.4.2 Audio I/O connections Audio I/O ports.
2-16 Chapter 2: Basic installation Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 2.1 channel Speakers.
ASUS X99-E WS 2-17 Chapter 2 When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the light blue port. 2.5 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off.
2-18 Chapter 2: Basic installation Chapter 2 BIOS Beep Description One short beep VGA detected Quick boot set to disabled No keyboard detected One continuous beep followed by two short beeps then a pa.
ASUS X99-E WS 3-1 Chapter 3 The new ASUS UEFI BIOS is a Unied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more exible and convenient mouse input.
3-2 Chapter 3: BIOS setup Chapter 3 • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
ASUS X99-E WS 3-3 Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority.
3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
ASUS X99-E WS 3-5 Chapter 3 Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and conguration.
3-6 Chapter 3: BIOS setup Chapter 3 Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste.
ASUS X99-E WS 3-7 Chapter 3 3.2.3 QFan Control The QFan Control allows you to set a fan prole or manually congure the operating speed of your CPU and chassis fans.
3-8 Chapter 3: BIOS setup Chapter 3 Configuring fans manually Select Manual from the list of proles to manually congure your fans’ operating speed. To congure your fans: 1. Select the fan that you want to congure and to view its current status.
ASUS X99-E WS 3-9 Chapter 3 3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also easily set RAID in your system using this feature. Tuning your system settings To tune your settings: 1.
3-10 Chapter 3: BIOS setup Chapter 3 Creating RAID To create RAID: 1. Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. 2. Click RAID then click Next . • Ensure that your HDDs have no existing RAID volumes.
ASUS X99-E WS 3-11 Chapter 3 3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items..
3-12 Chapter 3: BIOS setup Chapter 3 Adding items to My Favorites To add BIOS items: 1. Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.
ASUS X99-E WS 3-13 Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-14 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS X99-E WS 3-15 Chapter 3 3.5 Ai T weaker menu The Ai Tweaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect eld values can cause the system to malfunction.
3-16 Chapter 3: BIOS setup Chapter 3 The following item appears only when you set the CPU Strap to [100MHz] , [125MHz] , [167MHz] , or [250MHz] . Source Clock Tuner [Auto] This item allows you to select the source clock based on the assigned CPU strap for a better overclocking capability.
ASUS X99-E WS 3-17 Chapter 3 2-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 2-Core Limit value that must be higher than or equal to the 3-Core Ratio Limit. If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto] .
3-18 Chapter 3: BIOS setup Chapter 3 Internal PLL Overvoltage [Auto] This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme overclocking capability.
ASUS X99-E WS 3-19 Chapter 3 Primary Timings DRAM CAS# Latency [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# to CAS# Delay [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# P.
3-20 Chapter 3: BIOS setup Chapter 3 Third Timings tRRDR [Auto] Conguration options: [Auto] [1] - [7] tRRDD [Auto] Conguration options: [Auto] [1] - [7] tWWDR [Auto] Conguration options: [Aut.
ASUS X99-E WS 3-21 Chapter 3 DRAM RTL (CHA D0 R1) [Auto] Conguration options: [Auto] [1] - [127] DRAM RTL (CHA D1 R0) [Auto] Conguration options: [Auto] [1] - [127] DRAM RTL (CHA D1 R1) [Auto] C.
3-22 Chapter 3: BIOS setup Chapter 3 DRAM IO-L (CHB D1 R1) [Auto] Conguration options: [Auto] [1] - [255] DRAM IO-L (CHC D0 R0) [Auto] Conguration options: [Auto] [1] - [255] DRAM IO-L (CHC D0 R.
ASUS X99-E WS 3-23 Chapter 3 Receiver DQ Pre-emphasis [Auto] Conguration options: [Auto] [0.90] - [1.60] Receiver DQ De-emphasis [Auto] Conguration options: [Auto] [0.90] - [1.60] Transmitter DQ Pre-emphasis [Auto] Conguration options: [Auto] [0.
3-24 Chapter 3: BIOS setup Chapter 3 MISC DRAM Eventual Voltage (CHA/CHB/CHC/CHD) [Auto] Use <+> or <-> to adjust the eventual voltages of the DIMM slots. The values range from 0.8 V to 1.9 V with a 0.10 V increment. DRAM CLK Period [Auto] This item allows you to set a DRAM clock period.
ASUS X99-E WS 3-25 Chapter 3 CPU VRM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to congure a higher frequency for a quicker transient response speed. Conguration options: [Auto] [Manual] DO NOT remove the thermal module.
3-26 Chapter 3: BIOS setup Chapter 3 CPU Current Capability [Auto] This item provides a total power range for CPU overclocking. A higher value setting provides higher power consumption delivery and extends the overclocking frequency range simultaneously.
ASUS X99-E WS 3-27 Chapter 3 The following items appear only when you set the Turbo Mode to [Enabled] . Turbo Mode Parameters Long Duration Package Power Limit [Auto] Allows you to limit the Turbo Ratio’s time duration that exceeds the TDP (Thermal Design Power) for maximum performance.
3-28 Chapter 3: BIOS setup Chapter 3 CPU Core Voltage [Auto] This item allows you to congure the amount of Voltage fed to the CPU cores. Increase the voltage when conguring a high CPU core frequency.
ASUS X99-E WS 3-29 Chapter 3 The following items appear only when you set the CPU Core Voltage to [Offset Mode] . Offset Mode Sign [+] [+] To offset the voltage by a positive value. [-] To offset the voltage by a negative value. CPU Cache Voltage Offset [Auto] This item allows you to congure the CPU cache voltage offset value.
3-30 Chapter 3: BIOS setup Chapter 3 CPU Input Voltage [Auto] This item allows you to congure the input voltage for the CPU by the external voltage regulator. Use the <+> or <-> key to adjust the value. The values range from 0.80 V to 2.
ASUS X99-E WS 3-31 Chapter 3 PLL Termination Voltage [Auto] This item allows you to terminate the PLL Voltage. You can use the <+> or <-> keys to adjust the value. The values range from 0.20000 V to 3.098278 V with a 0.006602 V interval. PLL Reference Offset Mode Sign [+] [+] To offset the voltage by a positive value.
3-32 Chapter 3: BIOS setup Chapter 3 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
ASUS X99-E WS 3-33 Chapter 3 3.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Hyper-Threading [ALL] [Enabled] This item allows you to enable/disable the Hyper-Threading for logical processor threads.
3-34 Chapter 3: BIOS setup Chapter 3 Intel Virtualization Technology [Disabled] When set to [Enabled] , a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
ASUS X99-E WS 3-35 Chapter 3 3.6.2 PCH Configuration The following items appear only when you set the CPU states to [Enabled] . Enhanced C1 state [Enabled] This item allows your CPU to reduce power consumption when the system is in idle mode.
3-36 Chapter 3: BIOS setup Chapter 3 3.6.3 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.
ASUS X99-E WS 3-37 Chapter 3 SATA Controller 1 Mode Selection [AHCI] This item allows you to set the SATA conguration. [Disabled] Disables the SATA function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices.
3-38 Chapter 3: BIOS setup Chapter 3 3.6.4 System Agent Configuration NB PCI-E Configuration The items in this menu allow you to select the operating speeds of the PCIe slots. PCIEX16_1 Link Speed [Auto] This item allows you to select the operating speed of the PCIEX16_1 slot.
ASUS X99-E WS 3-39 Chapter 3 Intel VT for Directed I/O (VT-d) [Disabled] This item allows you to enable/disable the Intel Virtualization Technology for Directed I/O (VT-d) by reporting the I/O device assigment to VMM through DMAR ACPI Tables.
3-40 Chapter 3: BIOS setup Chapter 3 3.6.5 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.
ASUS X99-E WS 3-41 Chapter 3 xHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an xHCI hand-off feature. [Disabled] Disables the xHCI Hand-off support. EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand-off feature.
3-42 Chapter 3: BIOS setup Chapter 3 3.6.6 Platform Misc Configuration The items in this menu allow you to congure the platform-related features. SA - PCI Express SA SMI ASPM [Disabled] This item allows you to enable/disable the ASPM (L1) support for the downstream devices.
ASUS X99-E WS 3-43 Chapter 3 3.6.7 Onboard Devices Configuration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] This item allows you to use the Azalia High Denition Audio Controller Conguration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller to [Enabled] .
3-44 Chapter 3: BIOS setup Chapter 3 PCI-EX16_2 Slot (Black) Bandwidth [Audio] [Auto] Runs at x2 mode with ASUS ThunderboltEX card installed. Runs at x8 mode with other cards installed for high system performance. [X2 Mode] Runs at x2 mode with USB3_E12 enabled.
ASUS X99-E WS 3-45 Chapter 3 ASM106SE Storage Controller (SATAEXPRESS_E1) [Enabled] This item allows you to enable/disable the ASMedia storage Controller. Conguration options: [Disabled] [Enabled] The following items appear only when you set the ASM106SE Storage Controller (SATAEXPRESS_E1) to [Enabled] .
3-46 Chapter 3: BIOS setup Chapter 3 3.6.8 APM Configuration ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled] , all other PME options are switched off.
ASUS X99-E WS 3-47 Chapter 3 3.6.9 Network Stack Configuration Network stack [Disabled] This item allows you to disable/enable the UEFI network stack. Conguration options: [Disabled] [Enabled] The following item appears only when you set the Network Stack to [Enabled] .
3-48 Chapter 3: BIOS setup Chapter 3 3.6.10 Intel(R) Ethernet Connection (2) I218-LM 00:1E:99:00:00:37 NIC Configuration The items in this menu allow you to congure the boot protocol, Wake-on LAN, link speed, and virtual LAN. Link Speed [Auto Negotiated] This item allows you to specify the port speed used for the selected boot protocol.
ASUS X99-E WS 3-49 Chapter 3 3.6.11 Intel(R) I210 Gigabit Network Connection - 00:1E:99:00:00:38 NIC Configuration The items in this menu allow you to congure the boot protocol, Wake-on LAN, link speed, and virtual LAN. Link Speed [Auto Negotiated] This item allows you to specify the port speed used for the selected boot protocol.
3-50 Chapter 3: BIOS setup Chapter 3 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.
ASUS X99-E WS 3-51 Chapter 3 CPU Q-Fan Control [Auto] This item allows you to set the CPU Q-Fan operating mode. [Auto] Detects the type of CPU fan installed and automatically switches the control modes. [PWM Mode] Enables the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan.
3-52 Chapter 3: BIOS setup Chapter 3 Chassis Fan 1/4 Q-Fan Control [DC Mode] These items allow you to set the chassis fans’ Q-Fan control feature into DC Mode, PWM Mode, or disable these Q-Fan controls from your motherboard.
ASUS X99-E WS 3-53 Chapter 3 Chassis Fan 1/4 Lower Temperature [40] Use the <+> or <-> keys to adjust the chassis fans’ lower temperature. The values may differ via Qfan tuning. Chassis Fan 1/4 Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle.
3-54 Chapter 3: BIOS setup Chapter 3 3.8 Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Enabled] [Disabled] This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed.
ASUS X99-E WS 3-55 Chapter 3 Network Stack Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after an AC power loss.
3-56 Chapter 3: BIOS setup Chapter 3 Option ROM Messages [Force BIOS] This item allows you to set the display mode for Option ROM. Conguration options: [Force BIOS] [Keep Current] INT19 Trap Response [Immediate] [Immediate] Executes the trap for INT19 immediately.
ASUS X99-E WS 3-57 Chapter 3 Boot from PCI-E/PCI Expansion Devices [Legacy OpROM first] This item allows you to select the type of PCIe/PCI expansion devices that you want to launch.
3-58 Chapter 3: BIOS setup Chapter 3 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK).
ASUS X99-E WS 3-59 Chapter 3 Append dbx from File This item allows you to load the additional dbx from a storage device so that more db’s images cannot be loaded. The dbx le must be formatted as a UEFI variable structure with time-based authenticated variable.
3-60 Chapter 3: BIOS setup Chapter 3 3.9 Tool menu The Tool menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. GPU Post This item shows the installed graphics cards in your motherboard.
ASUS X99-E WS 3-61 Chapter 3 Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the prole number that saved your BIOS settings, press <Enter>, and then select Yes .
3-62 Chapter 3: BIOS setup Chapter 3 3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information..
ASUS X99-E WS 3-63 Chapter 3 3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
3-64 Chapter 3: BIOS setup Chapter 3 3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
ASUS X99-E WS 3-65 Chapter 3 3. Press <Tab> to switch to the Drive eld. 4. Press the Up/Down arrow keys to nd the USB ash disk that contains the latest BIOS, and then press <Enter>. 5. Press <Tab> to switch to the Folder Info eld.
3-66 Chapter 3: BIOS setup Chapter 3 3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
ASUS X99-E WS 3-67 Chapter 3 Booting the system in DOS environment To boot the system in DOS: 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port. 2. Boot your computer then press <F8> to launch the select boot device screen.
3-68 Chapter 3: BIOS setup Chapter 3 2. On the BIOS Updater screen, press <Tab> to switch from Files panel to Drives panel then select D: . ASUSTeK BIOS Updater for DOS V1.
X99-E WS 4-1 Chapter 4 Software support 4 4.1 Installing an operating system • Thismotherboardsupports32-bit/64-bitWindows ® 7,32-bit/64-bitWindows ® 8,and 32-bit/64-bitWindows ® 8.1operatingsystems(OS).
4-2 Chapter 4: Software support Chapter 4 The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to use the devices. The Utilities menu shows the applications and other software that the motherboard supports.
X99-E WS 4-3 Chapter 4 4.2.2 Obtaining the software manuals ThesoftwaremanualsareincludedinthesupportDVD.Followtheinstructionsbelowtoget thenecessarysoftwaremanuals. ThesoftwaremanuallesareinPortableDocumentFormat(PDF).
4-4 Chapter 4: Software support Chapter 4 4.3 Software information MostoftheapplicationsinthesupportDVDhavewizardsthatwillconvenientlyguideyou throughtheinstallation.Viewtheonlinehelporreadmelethatcamewiththesoftware applicationformoreinformation.
X99-E WS 4-5 Chapter 4 Launching AI Suite 3 Windows ® 7 OS FromtheDesktop,clickortap Start > All Programs > ASUS > AI Suite 3 > AI Suite 3 . YoucanalsolaunchAISuiteinWindows ® 7byclickingortapping ontheNotication area.
4-6 Chapter 4: Software support Chapter 4 AI Suite 3 main menu bar System Information USB 3.0 Boost Ai Charger+ EZ Update USB Charger+ USB BIOS Flashback Dual Intelligent Processors 5 AI Suite 3 Main .
X99-E WS 4-7 Chapter 4 4.4.1 Ai Charger+ AiCharger+allowsyoutofast-chargeyourportableBC1.1*mobiledevicesonyour computer’sUSBportthreetimesfasterthanthestandardUSBdevices**.
4-8 Chapter 4: Software support Chapter 4 4.4.2 USB 3.0 Boost USB3.0BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically speedsupthetransferratesofyourUSBstoragedevices. Launching USB 3.
X99-E WS 4-9 Chapter 4 4.4.3 EZ Update EZUpdateisautilitythatallowsyoutoautomaticallyupdateyourmotherboard’ssoftware, driversandBIOSeasily. Withthisutlity,youcanalsomanuallyupdatetheBIOSandselectthebootlogothatdisplays duringPOST.
4-10 Chapter 4: Software support Chapter 4 Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to EZ Update main screen C.
X99-E WS 4-11 Chapter 4 4.4.4 USB BIOS Flashback USBBIOSFlashbackallowsyoutocheckandsavethelatestBIOSversiontoaUSB storagedevice.UsethisutilitytoquicklycheckforthelatestavailableBIOSandsettheBIOS downloadschedule.
4-12 Chapter 4: Software support Chapter 4 Downloading the latest BIOS Beforeyoustartdownloading,ensurethatyouhaveinstalledtheUSBstoragedeviceto yourcomputer’sUSBportthatsupportsUSBBIOSFlashback.
X99-E WS 4-13 Chapter 4 4.4.5 USB Charger+ USBCharger+allowsyoutoquick-chargeyourportableUSBdevicesevenifyourcomputer isoff,insleepmodeorhibernatemode.
4-14 Chapter 4: Software support Chapter 4 4.4.6 Push Notice Thisutilityallowsyougetthedetailedstatusofyoursystemtoyoursmartdevice.Youcan alsosendmessagestoyoursmartdeviceusingthisutility.
X99-E WS 4-15 Chapter 4 Setting up PC Mode alerts of your computer Thisfeatureallowsyoutorestart,shutdown,orputyourcomputertosleepmodeandsends analerttoyoursmartdevice.
4-16 Chapter 4: Software support Chapter 4 Viewing your computer status on your smart device Tap Push Notice onyoursmartdevicetolaunchPushNotice. Sending messages to your smart device Thisfeatureallowsyoutosendmessagestoyoursmartdevice.
X99-E WS 4-17 Chapter 4 4.4.7 System Information Thisutilityallowsyougetthedetailedinformationofthemotherboard,CPU,andmemory settings.
4-18 Chapter 4: Software support Chapter 4 4.5 Audio configurations TheRealtek ® audioCODECprovides8-channelaudiocapabilitytodelivertheultimateaudio experienceonyourcomputer.ThesoftwareprovidesJack-Sensingfunction,S/PDIFOut support,andinterruptcapability.
X99-E WS 4-19 Chapter 4 A. Realtek ® HD Audio Manager with DTS UltraPC II for Windows ® 8.1 / Windows ® 8 / Windows ® 7 Configuration option tabs (vary with the audio devices connected) Advanced s.
4-20 Chapter 4: Software support Chapter 4 4.6 ASUS Dr. Power Utility ASUSDr.Powerisamonitoringutilitythatprovidesnoticationswhenthepowersupply isunabletoprovidesufcientpowertothesystem.
X99-E WS 4-21 Chapter 4 WhenASUSDr.Powerdetectsthatyoursystemisrunninglowonpower,anevent noticationpopsuptoindicatethatyourpowersupplyrequiresattention.Themessagewill bedisplayedfor15secondsoruntilyouclicktheClosebutton.
4-22 Chapter 4: Software support Chapter 4.
X99-E WS 5-1 Chapter 5 RAID support 5 5.1 RAID configurations The motherboard supports Intel ® Rapid Storage Technology with RAID 0, RAID 1, RAID 10, and RAID 5 solution.
5-2 Chapter 5: RAID congurations Chapter 5 5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID conguration: 1.
X99-E WS 5-3 Chapter 5 5.1.4 Intel ® Rapid Storage Technology Option ROM utility To enter the Intel ® Rapid Storage Technology Option ROM utility: 1. Turn on the system. 2. During POST, press <Ctrl> + <I> to display the utility main menu.
5-4 Chapter 5: RAID congurations Chapter 5 Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
X99-E WS 5-5 Chapter 5 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),then press <Enter>.
5-6 Chapter 5: RAID congurations Chapter 5 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press <Enter>.
X99-E WS 5-7 Chapter 5 Exiting the Intel ® Rapid Storage Technology Option ROM utility To exit the utility: 1. From the utility main menu, select 5. Exit , then press <Enter>. The following warning message appears: 2. Press <Y> to exit or press <N> to return to the utility main menu.
5-8 Chapter 5: RAID congurations Chapter 5 5.2.2 Creating a RAID driver disk in Windows ® To create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Plug the USB oppy disk drive and insert a oppy disk. 3. Place the motherboard support DVD into the optical drive.
X99-E WS 6-1 Chapter 6 Multiple GPU support 6 6.1 AMD ® CrossFireX™ technology The motherboard supports the AMD ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-2 Chapter 6: Multiple GPU support Chapter 6 6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.
X99-E WS 6-3 Chapter 6 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. ConnectaVGAoraDVIcabletothe graphics card. 6.1.4 Installing three CrossFireX™ graphics cards To install three CrossFire™ graphics cards: 1.
6-4 Chapter 6: Multiple GPU support Chapter 6 6.1.5 Installing four CrossFireX™ graphics cards To install four CrossFire™ graphics cards: 1. Prepare four CrossFireX-ready graphics cards.
X99-E WS 6-5 Chapter 6 6.1.6 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD ® CrossFireX™ technology.
6-6 Chapter 6: Multiple GPU support Chapter 6 Enabling Dual CrossFireX™ technology To enable Dual CrossFire™ technology: 1. IntheAMDVisionEngineControlCenterwindow,click Performance > AMD CrossFireX™ . 2. Select Enable CrossFireX™ .
X99-E WS 6-7 Chapter 6 6.2 NVIDIA ® SLI™ technology ThemotherboardsupportstheNVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-8 Chapter 6: Multiple GPU support Chapter 6 4. AlignandrmlyinserttheSLIbridgeconnectortothegoldngersoneachgraphics card.Ensurethattheconnectorisrmlyinplace. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately.
X99-E WS 6-9 Chapter 6 4. Alignandrmlyinsertthe3-waySLI bridgeconnectortothegoldngerson each graphics card. Ensure that the connectorisrmlyinplace. 5. Connect three independent auxiliary power sources from the power supply to the three graphics cards separately.
6-10 Chapter 6: Multiple GPU support Chapter 6 6.2.6 Enabling the NVIDIA ® SLI™ technology Afterinstallingyourgraphicscardsandthedevicedrivers,enabletheSLIfeatureinNVIDIA® ControlPanelundertheWindows ® 7 operating system.
X99-E WS 6-11 Chapter 6 B2. From the Screen Resolution window, click Advanced settings . B3. TheNVIDIAControlPanelwindow appears. Enabling SLI settings FromtheNVIDIAControlPanelwindow, select Configure SLI , Surround , PhysX .
6-12 Chapter 6: Multiple GPU support Chapter 6.
ASUS X99-E WS A-1 Appendices Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.
A-2 Appendices Appendices IC: Canadian Compliance Statement ComplieswiththeCanadianICES-003ClassBspecications.ThisdevicecomplieswithRSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.
ASUS X99-E WS A-3 Appendices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.
A-4 Appendices Appendices Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
ASUS X99-E WS A-5 Appendices ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.com/ Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext.
A-6 Appendices Appendices EC Declaration of Confo rmity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TA IWAN Aut horized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus X99-E WS c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus X99-E WS - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus X99-E WS, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus X99-E WS va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus X99-E WS, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus X99-E WS.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus X99-E WS. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus X99-E WS ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
