Manuel d'utilisation / d'entretien du produit WV-CW480S du fabricant Panasonic
Aller à la page of 48
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. WV-CW484F is shown above. Colour CCTV Cameras Operating Instructions Model Nos.
2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC.
4 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
6 Preface Panasonic's WV-CW484F and WV-CW480S cameras introduce high picture quality by use of Super-Dynamic 1/3 inch CCD and digital signal processing LSIs. • WV-CW484F: This is a model with 2x variable focal lens. Mounting bracket and ceiling mount bracket are optional.
7 Precautions This apparatus has no power switch. Power is supplied from an external 12 V DC/ 24 V AC (WV-CW484F) or 220 V to 240 V AC (WV-CW480S) power-supply device.
8 About the dehumidifying device • The camera has dehumidifying device to keep the inside at low moisture level, preventing condensation and quickly dis- sipating dew if produced. • Dew may be produced depending on the conditions of temperature, humidity, winds, and rain, and it may take time to dehumidify.
9 Consumable parts Contact your dealer for replacement of the following part when the time comes: Cooling fan needs replacement after around 30 000 hours of operation. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
10 Major Operating Controls and Their Functions q w e y !1 !2 !3 !4 !6 !7 !8 !9 !55 u i o !0 r t.
11 q Power cable (12 V DC or 24 V AC) Cautions: • Supplies 24 V AC or 12 V DC from an external power source. (WV-CW484F) • Supplies 220 V to 240 V AC from an external power source. (WV-CW480S) w Video output cable with BNC connec- tor Connects wih the video connector.
12 Installations • The following installation should be made by qualified service personnel or system installers. • Mounting Bracket (WV-Q114) is optional for WV-CW484F. Use the screws provided to the Mounting Bracket. • Mounting Bracket is provided to WV-CW480S.
13 ■ Installations (WV -CW484F) ● Using a Junction Box Secure the provided camera attachment to the two gang junction box built in a wall or ceiling.
14 ■ Installations (WV -CW480S) ● Using Provided Mounting Bracket • Secure the provided camera mounting bracket to wall or ceiling, and fix the provided cam- era attachment to the mounting bracket with the screws for to the mounting bracket. (Refer to the following figures.
15 Camera attachment (provided) <Fixing the camera attachment to the mounting bracket> ■ How to mount the camera (WV -CW484F , WV -CW480S) 1. Connect the power cable and the BNC plug of the video output cable. (Refer to p. 22 Connections.) 2. Secure the camera with four attachment fixing screws.
16 5. Remove the screw for transport protec- tion with a Phillips screw driver. Protrusion Rear screw Screw hole of camera attachment 3. Hook the rear screws on the screw holes of camera attachment, and turn the cam- era unit clockwise to fix the camera unit and camera attachment.
17 6. Secure the camera unit to the bracket with the camera lock screw. Camera fixing screw 7. Adjust the camera. (Refer to p. 20.) 8. Attach the enclosure to the camera. Firmly tighten the three tamper-proof screws. (Recommended tightening torque: 0.
18 ■ W aterproof Process • When routing cables sideway using Mounting Bracket or installing the camera under eaves, apply waterproof process to the cable and relevant portions. • The cables are not waterproofed. Provide water sealing for the tube ends and the portions between cable cores as well as connecting portions.
19 Notes: • Surely attach a pipe fitting to the bracket to avoid exposing the cables. Otherwise, cable deterioration resulting from cable exposure may cause a short circuit. • Run the conduit downward or pull the conduit out of the side of the bracket.
Important: After pan/tilt/azimuth adjustment, firmly tight- en the panning lock screw and tilting lock screw. (Recommended tightening torque: 0.59 N·m) 3. Zoom • Unlock the zoom lever. • Move the lever to adjust the zoom. • Lock the lever. 4. Focus • Unlock the focus lever.
21 5. Aim the camera at the targeting objects and if applicable adjust the zoom angle. 6. Press the [ABF1] button. → The LED indicator will light up, and a bar graph with "I" cursor and INDICATOR (4-digit number) will be overlaid on the camera picture.
22 Connections ● Video Output Connection Connect the video output connector to the monitor or other system device with the pro- cured coaxial cable. The maximum extensi- ble length is shown in the table.
23 Cautions: • Be sure to connect the GND (grounding) lead of the camera and grounding termi- nal of the power supply when using a 24 V AC (WV-CW484F) or 220 V to 240 V AC (WV-CW480S) power source. • Shrinking the cable-entry seal is a one- time procedure.
24 Heater unit screw Optional heater connector ■ Optional Heater Unit WV -CW4H ● Introduction Installing this heater unit enables the camera to operate in a low-temperature environment below –30 °C. The heater turns on automatically when the temperature inside the camera drops below +10 °C and turns off when the temperature rises.
25 About Setup Menus Before operation, setup of this camera is required. On the setup menu, you can check current settings and perform settings to meet requirements.
26 SPECIAL CHROMA GAIN Adjust the chroma level (colour density). AP GAIN Adjust the aperture level. PEDESTAL Adjust the pedestal level (brightness). PIX OFF Correct image defects such as scratches. CAMERA RESET Reset the settings of setup menu to the default set- tings.
27 ■ Basic operation The following are descriptions of how to configure each setup item using the operation buttons (refer to p. 10) on the camera. Setup using an optional system controller is also available. Notes: • The illustrations are the examples to be displayed on a video monitor.
28 6. To exit from the SETUP menu and display images from the camera, move the cursor onto "END" and press the [SET] button. Notes: • To prevent erroneous operations, the "DISABLE" indication will always be displayed when the top page is displayed from the camera.
29 Setting Procedures First, select a language for menu display and camera ID display. Language Setup (LANGUAGE SETUP) 1. Select LANGUAGE on the top menu and press the [SET] button. → The LANGUAGE SETUP menu opens. 2. Select a language. The default setting is English.
30 • To erase all characters of the camera ID, select RESET and press the [SET] button. Note: For Chinese language, up to 8 characters can be entered. 4. To specify the ID display position: 1. Select POSI and press the [SET] button. → The entered camera ID will be highlighted on the screen.
31 2-2. ALC Mode with SUPER-D3 OFF 1. Move the cursor to ALC on the CAMERA SETUP menu and select OFF for SUPER-D3 on the ALC CONT menu. → MASK SET ↓ appears on the ALC CONT menu. 2. Select MASK SET and press the [SET] but- ton. → The 48 mask areas appear overlaid on the camera picture with the blinking cursor in the upper left corner.
32 Notes: • Only OFF is available when SUPER-D3 is set to ON. • When a faster speed is selected for the electronic shutter, the picture will generally become darker, and sometimes a smear (vertical stripes caused by bright objects) may appear. 4. Gain Control Setting (AGC) Select an automatic gain control mode.
33 6. Synchronization Setting (SYNC) 1. Select a sync mode. VD2: Multiplexed vertical drive, highest priority LL: Line-Lock, follows the phase of supplied AC power, 2nd priority INT: Internal sync, lowest priority Notes: • Selection is not available when VD2 is added to the camera.
34 AWC Setting 1. Select AWC and press the [LEFT] button. → AWC will change to AWC → PUSH SW. 2. Press the [SET] button. → PUSH SW will be highlighted while the AWC setting is performed. Note: If the white balance is not set, PUSH SW is being highlighted.
35 5. Select ON or OFF for ALARM under DISPLAY MODE. ON: Outputs an alarm OFF: Does not output an alarm. This is applicable any of the following controllers are used: WV-RM70, WV-CU550 series, WV-CU161, WV-CU360, WV-CU650, WV-CU850, WV- CU950 6. Select DISPLAY MODE and press the [SET] button to see the current settings.
36 About MODE2 of Motion Detection • The camera will detect a scene change in the following cases. When the lens is fully sprayed or covered with a cloth, lid, or the like When the camera direction is suddenly changed • The camera will not detect a scene change in the following cases.
37 → When AUTO1 or AUTO2 is selected, LEVEL and DURATION TIME appear. 3. Select a threshold LEVEL to switch between the colour and black-and-white mode. The default setting is HIGH. HIGH: Switches the mode at approx. 5 lx illu- mination. LOW: Switches the mode at approx.
38 5. Select → PUSH SW for SCALE and press the [SET] button. → Zone scale adjustment becomes available. 6. Adjust the zone scale using the [LEFT], [RIGHT], [UP], or [DOWN] button. 7. To apply the settings, move the cursor to SET and press the [SET] button.
39 • Image stabilization may not function where there is excessive camera movement or when the scene is low light or low contrast objects. 16. LENS Select PANASONIC.
40 4. Select a mode for C/L ↔ B/W. The default setting is AUTO. AUTO: Adjusts the back-focus automatically every time the camera switches the mode between colour and black-and-white. AUTO is usable only when OFF, X2 AUTO, or X2 FIX is selected for SENS UP.
41 18-2. Aperture Gain Setting (AP GAIN) Move the "I" cursor to adjust the aperture gain level. Lower the level when moire (a kind of noise, optical interference) appears on the screen as part of minute crosshatch pattern, etc.
42 18-5. To reset to the default settings (CAMERA RESET) 1. Select CAMERA RESET. → The PUSH SW is highlighted. 2. While holding down the [LEFT] and [RIGHT] buttons, press the [SET] button for 2 seconds or more. → The camera will return to the default settings.
43 • Is 24 V AC or 12 V DC power sup- ply connect to the power supply terminal? (WV-CW484F) • Is 220 V to 240 V AC power sup- ply connect to the power supply terminal? (WV-CW480S) • Is the video output cable connect- ed to the video connector of the monitor? → Confirm the cables are firmly connected.
44 Specifications <WV-CW484F General specifications> Power source and power consumption: 24 V AC 50 Hz, 4.1 W (Without heater), 11 W (With heater), 12 V DC 50 Hz, 340 mA (Without heater), 470 mA.
45 Minimum illumination: When using Clear Dome Cover: 0.08 lx at F1.4 (B/W) 0.6 lx at F1.4 (C/L) When using Smoke Dome Cover (Option): 0.16 lx at F1.4 (B/W) 1.5 lx at F1.4 (C/L) Lens mount: CS-mount Lens Type: 2x variable focal lens Focal length: f=3.
46 Optional Accessories Smoke Dome Cover WV-CW4S Weight: Approx. 110 g Heater Unit WV-CW4H Weight: Approx. 40 g Mounting Bracket WV-Q114 (For WV-CW484F) Weight: Approx. 470 g Ceiling Mount Bracket WV-Q166 Weight: Approx. 680 g Standard Accessories Operating Instructions (This document) .
47.
Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://panasonic.net Printed in Japan Gedruckt in Japan Imprim é au Japon © 2006 Matsushita Electric Industrial Co.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic WV-CW480S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic WV-CW480S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic WV-CW480S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic WV-CW480S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic WV-CW480S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic WV-CW480S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic WV-CW480S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic WV-CW480S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
