Manuel d'utilisation / d'entretien du produit WV-CP314 du fabricant Panasonic
Aller à la page of 28
Before attempting to connect or operate this pr oduct, please read these instructions car efully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
2 Preface About the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configue the settings of the camera. Refer to the installation guide for further information about how to install the camera.
3 Contents Preface .......................................................................................................................................... 2 About the setup menus .....................................................................
4 About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting ar ea. List of setup menu Setup item Description CAMERA ID This item specifies the camera title.
5 Screenshot 2 The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. Step 3 Move the curs or to the item to be set, and press the [SET] button. Screenshot 1 Hold down the [SET] button for about 2 sec- onds to call up the top scr een of the setup menu.
6 Screenshot 3 The selected setup screen in the setup menu appears on the screen. Note: • If the top screen of the setup menu is called up with the operation buttons while the camera is operated, the setup mode is always "DISABLE" to prevent operation errors.
7 Screen transition diagram CP310 CP310 CP300 ...I... 0 HUE T op screen “CAMERA ID” screen “CAMERA SETUP” screen “SYSTEM SETUP” screen “SPECIA L SETUP” screen “LANGUAGE SETUP” scre.
8 Screen transition diagram CP310 CP310 CP300 T op screen “CAMERA ID” screen “CAMERA SETUP” screen “SYSTEM SETUP” screen “SPECIA L SETUP” screen “LANGUAGE SETUP” screen MODEL WV-CP.
9 This item specified the camera title. The camera title is named with up to 8 characters when using only Chinese characters, and up to 16 characters when using only English letters or num- bers. Chinese character , English letters and numbers can be used together .
10 Camera operation setting [CAMERA SETUP] The following settings related to camera actions can be configured on the "CAMERA SETUP" screen displayed fr om the top screen. Refer to page 5-6 for how to call up the scr een. The settings configured on the "CAMERA SETUP" scr een will be saved as a scene file.
11 2 Lightquantitycontrolmethodselection[ALC/ELC] The method of controlling the quantity of light is selected from the following in accordance with the lens to be used. ALC (default): The iris of the lens is automatically adjusted in accordance with the brightness of a subject.
12 Note: • When“BLC”issetto“ON”,“ABS”displays“---”andmaynotbeoperated. Step 4 When "BLC" is set to "OFF", bright areas of an image ar e masked to facilitate the visibility of dark areas.
13 Note: • When"SENSUP"issettotheAUTOmode,“AGC”cannotbesetto“OFF”. 5 Electronicsensitivityenhancementsetting[SENSUP] Use of the electronic sensitivity enhancement function increases the light sensitivity of the CCD, and accordingly the image becomes brighter .
14 Step 1 Set "WHITE BAL" to "AWC" and pr ess the [LEFT ] button to change to "A WC → PUSH SET". Step 2 Press the [SET ] button and adjust the white balance. "AWC → PUSH SET" is reversely high- lighted during adjustment.
15 Step 4 Move the cursor to "POSITION" and press the [SET ] button. Step 5 Press the [UP], [DOWN], [RIGHT ] and [LEFT ] buttons to move to the upper -left part of the area to be set, and press the [SET ] button.
16 CP310 CP310 CP300 AUTO: Similar to the basic functions of AUTO1, but does not change the IR filter . Switches to black-and-white images when brightness (illuminance) around the camera is lower than approx. 0.1 lx. OFF (default): Displays color images.
17 Note: • Images may not bedisplayed appropriately without burst signals when camera imagesare displayed in the black-and-white mode depending on a monitor or VCR model to be used. In such a case, set the burst signal output to "ON".
18 Step 2 Move the cursor to "MASK SET" and press the [SET ] button. → The “MASK SET” screen appears. In the masked area, no alarm will be issued even if a moving object is detected. The masked area is set in the same way as the masked area setting in Light quantity control method selec- tion.
19 Step 6 Move the cursor to “Level”. Use the [RIGHT ] or [LEFT ] button to adjust the level. Repeat step 5 and 6 to adjust to optimal level. Step 7 Move the cursor to “DWELL TIME ”.
20 Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchr onization and privacy zone. The following settings can be configured on the "SYSTEM SETUP" screen displayed from the top screen. Refer to page 5-6 for how to call up the scr een.
21 → The "ZONE NUMBER" screen appears. Step 2 Move the cursor to the number at the right of the title and select the zone number using the right or left button.
22 When "ON" is selected, the zoom factor and the panning/tilting settings can be configured. Follow the procedur e below . ** EL-ZOOM ** PUSH SET PUSH SET ** EL-ZOOM ** PUSH SET PUSH SET **.
23 The special menu setup is performed including the setting of the camera image quality and the communication configuration when a decoder is used. The following settings ar e to be config- ured on the "SPECIAL SETUP" screen displayed fr om the top screen.
24 J Flawcompensation[PIXOFF] Flaws of pixel in the displayed camera image are corr ected. Up to 16 points can be corrected. Follow the procedur e below . Step 1 Move the cursor to "PIX OFF" and press the [SET ] button. → The "PIX OFF" screen appears.
25 L Default resetting [CAMERA RESET] The settings in the setup menu are r estored to the default settings. Move the cursor to " → PUSH SET" of "CAMERA RESET" and hold down the [SET ] button for more than 2 seconds to enter the next scr een.
26 The language selection can be made on the "LANGUAGE SETUP" screen displayed fr om the top screen. Refer to page 5-6 for how to call up the scr een. Move the cursor to “LANGUAGE”, use the [RIGHT ] or [LEFT ] button to select the tar get lan- guage, then move the cursor to “SET”, and press the [SET ] button.
27 Use of a system controller with the "Camera function" button allows users to perform the shortcut settings with use of the numeric keypad and camera function button.
Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www .panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic W ay , Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic WV-CP314 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic WV-CP314 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic WV-CP314, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic WV-CP314 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic WV-CP314, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic WV-CP314.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic WV-CP314. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic WV-CP314 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
