Manuel d'utilisation / d'entretien du produit PTTW230U du fabricant Panasonic
Aller à la page of 81
Operating Instructions Projector Operations LCD Projector Commercial Use Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully and save this manual J for future use. For information on using the product via a network, refer to “Operating Instructions – Network Operations”.
Read this rst! 2 - ENGLISH Important Information Read this rst! W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V , 50 Hz/60 Hz AC, house current only .
Read this rst! ENGLISH - 3 Important Information FCC NOTICE (USA) Declaration of Conformity Model Number: PT -TW231RU T rade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic W ay , Secaucus, NJ 07094 T elephone number: (877)803-8492 E-mail: projectorsupport@us.
Read this rst! 4 - ENGLISH Important Information W ARNING: PO WER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately .
Read this rst! ENGLISH - 5 Important Information W ARNING: Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician. If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.
Read this rst! 6 - ENGLISH Important Information W ARNING: ACCESSORI ES Do not use or handle the batteries for remote control, interactive pointer and interactive light pen improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
Read this rst! ENGLISH - 7 Important Information CAUTION: PO WER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result.
Read this rst! 8 - ENGLISH Important Information T rademarks HDMI, the HDMI logo and High-Denition Multimedia Interface is a trademark or registered trademark of HDMI • Licensing LLC. Other names, company names or product names used in these operating instructions are the trademarks or • registered trademarks of their respective holders.
ENGLISH - 9 This function enables Input search and Auto PC adj. by pressing the <AUT O SETUP> button on the remote control. With the Direct Power Of f function, you can disconnect the power cord from the wall outlet or turn of f the breaker even during projection.
10 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Be sure to read “Read this rst!”. ( pages 2 to 8) Important Information Read this rst! ....................................
ENGLISH - 11 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Image adjust............................................. 45 Contrast ........................................................................
12 - ENGLISH Important Information Precautions for Use Cautions when transporting When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. z Doing so may damage the internal parts and result in malfunctions.
Precautions for Use ENGLISH - 13 Important Information Cautio ns when set ting the pro jector s J Do not stack the projectors. z Do not block the ventilation ports z (intake and exhaust) of the projector . Avoid heating and cooling air from z the air conditioning system directly blow to the ventilation ports (intake and exhaust) of the projector .
Precautions for Use 14 - ENGLISH Important Information Cautions on use I n ord er to get th e pi ctu re qu al ity J Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light z from indoor lamps from shining onto the screen.
Precautions for Use ENGLISH - 15 Important Information Accessories Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories.
Precautions for Use 16 - ENGLISH Important Information Contents o f the suppl ied J CD-R OM No.1 The contents of the supplied CD-ROM are as follow . [ : Instructions/List (PDF), : Software] .
ENGLISH - 17 Preparation About Y our Projector Remote control (1) <AUTO SETUP> Button Execute the setting of Auto setup in the setting menu. ( Æ page 52) (2) Input Selection Buttons: <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, <COMPONENT>.
About Y our Projector 18 - ENGLISH Preparation (1) Control panel ( Æ page 19) (2) Lamp cover ( Æ page 65 ) The lamp unit is located inside. (3) Remote control signal receiver (4) Interactive Camera (5) Projection lens (6) Speaker (7) Air outlet port Hot air is exhausted from the exhaust vent.
About Y our Projector ENGLISH - 19 Preparation Control panel (1) < > button T urn the projector on/off. (2) ▲▼◄► (VOL -/+) buttons Navigate the MENU screen. (3) <ENTER> button Execute the selected item. (4) <MENU> button Displays the MENU screen.
About Y our Projector 20 - ENGLISH Preparation Side terminals (1) LAN Connect to a LAN cable for network connection. (2) HDMI Connect to HDMI input signals.
Using Remote control ENGLISH - 21 Preparation Using Remote control Installing and Removing batteries Open the cover 1 ) Install batteries and close the cover 2 ) (Insert the – side rst.) Remove the batteries in the reverse order of z installation.
22 - ENGLISH Getting Started Setting up Projection method Y ou can use the projector with any of the following 4 projection methods. T o set the desired method in the projector .
Setting up ENGLISH - 23 Getting Started Screen size and throw distance Place the projector referring to the diagram on the right and the gures of throwing distance.
Setting up 24 - ENGLISH Getting Started Adjusting front adjustable feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rotate the both feet clockwise.
ENGLISH - 25 Getting Started Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. z T urn off the power switch of the devices before connecting cables.
26 - ENGLISH Basic Operation Powering ON/OFF Connecting the power cord Be sure to insert the attached power cord securely to its base to prevent it from coming off. Power cord holder J AC power cord holder is designed to prevent the AC power cord from coming off the projector .
Powering ON/OFF ENGLISH - 27 Basic Operation ON(G)/ST ANDBY(R) indicator The <ON(G)/ST ANDBY(R)> indicator informs you the status of the power . Conrm the status of the <ON(G)/ ST ANDBY(R)> indicator before operating the projector . Indicator status Status No illumination or ashing The power cord is unplugged.
Powering ON/OFF 28 - ENGLISH Basic Operation Complete peripheral connections (with a 1 ) computer , VCR, etc.) before turning on the projector . Connect the projector ’s AC power cord into an 2 ) AC outlet. The <ON(G)/ST ANDBY(R)> indicator lights red.
Powering ON/OFF ENGLISH - 29 Basic Operation Press ▲▼ to enter a number . Press ► to x the number and move the red frame pointer to the next box. The number changes to . If you xed an incorrect number , use the ◄ button to move the pointer to the number you want to correct, and then enter the correct number .
Powering ON/OFF 30 - ENGLISH Basic Operation Press the < 1 ) > button on the control panel or on the remote control, and Power off? appears on the screen. Press the < 2 ) > button again to turn off the projector . The <ON(G)/ST ANDBY(R)> indicator starts to blink red, and the cooling fans keep running.
ENGLISH - 31 Basic Operation Projecting Check the connections of the peripheral devices and connection of the power cord ( Æ page 26) and switch on the power ( Æ page 28) to start the projector . Select the image and adjust the state of the image. Selecting the image Select an input signal.
32 - ENGLISH Basic Operation Basic operations by using the remote control Using the Auto setup function This function allows you to automatically adjust Input search and Auto PC adj. during signal input from a computer . button Press the <AUTO SETUP> button on the remote control.
Basic operations by using the remote control ENGLISH - 33 Basic Operation Using the KEYST ONE button This function allows you to correct keystone distortion. button Press the <KEYSTONE> button on the remote control or on the control panel. The Keystone dialog box appears.
Basic operations by using the remote control 34 - ENGLISH Basic Operation Using the A V MUTE function button Press the <A V MUTE> button on the remote control to black out the image. T o restore to normal, press the <A V MUTE> button again or press any button.
Basic operations by using the remote control ENGLISH - 35 Basic Operation Using the IMAGE button This function allows you to select a desired image mode of the screen.
36 - ENGLISH Settings Menu Navigation Navigating through the menu Operating procedure J Press the <MENU> button. 1 ) The Main Menu screen appears.
Menu Navigation ENGLISH - 37 Settings Main menu The main menu consists of the following 9 menu items. When a main menu item is selected, the screen changes to a submenu selection screen.
Menu Navigation 38 - ENGLISH Settings Image adjust [ ] Sub-menu item Factory default Page Contrast 32 45 Brightness 32 45 Color* 1 32 45 T int* 1 32 45 Color temp.
ENGLISH - 39 Settings Input menu Select [Input] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel Computer 1: RGB/Component /RGB (Scart) Press ▲▼ to select [Computer 1].
Input menu 40 - ENGLISH Settings Component Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
AUT O PC adjust ENGLISH - 41 Settings AUT O PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.
Manual PC adjust 42 - ENGLISH Settings Manual PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector .
Manual PC adjust ENGLISH - 43 Settings Current mode Press ▲▼ to select [Current mode]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu to show H-sync freq. and V -sync freq. of the connected computer . Clamp Press ▲▼ to select [Clamp].
44 - ENGLISH Settings Image select Select [Image select] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Dynamic For viewing pictures in a bright room. Press ▲▼ to select [Dynamic] and then press the <ENTER> button.
Image adjust ENGLISH - 45 Settings Select [Image adjust] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel Contrast Press ▲▼ to select [Contrast]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box.
Image adjust 46 - ENGLISH Settings Red Press ▲▼ to select [Red]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box. Press ◄► to adjust the setting value. 3 ) Operation Adjustment Adjustment range Press ►. deepen red tone Maximum value 63 Press ◄.
Image adjust ENGLISH - 47 Settings Progressive Press ▲▼ to select [Progressive]. 1 ) Press the <ENTER> button to display 2 ) the dialog box. Press ◄► to select the desired item. 3 ) An interlaced video signal can be displayed in z progressive mode.
Screen 48 - ENGLISH Settings Screen Select [Screen] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel Normal Provide the image to t the screen size while maintaining the aspect ratio of the input signal.
ENGLISH - 49 Settings Custom adj. Adjust the screen scale and position manually with this function. Press ▲▼ to select [Custom adj.]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu. Press ▲▼ to choose the item you 3 ) want to adjust.
50 - ENGLISH Settings Ceiling This function is used to project the image from a ceiling-mounted projector . Press ▲▼ to select [Ceiling] and then 1 ) press the <ENTER> button. Press ▲▼ to change the image. 2 ) When this function is set to [On], the picture will z be top/bottom and left/right reversed.
Sound ENGLISH - 51 Settings Sound Select [Sound] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel V olume Press ▲▼ to select [V olume] and then 1 ) Press the <ENTER> button.
Setting 52 - ENGLISH Settings Setting Select [Setting] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu. Remote control Control panel Language Press ▲▼ to select [Language]. 1 ) Press ► or the <ENTER> button.
Setting ENGLISH - 53 Settings Background Select the b ackground scr een for when no input sig nal is detected. Press ▲▼ to select [Background]. 1 ) Press the <ENTER> button. 2 ) Press ▲▼ to switch 3 ) between each option as below . Blue Blue colored background.
Setting 54 - ENGLISH Settings Logo PIN code change J Logo PIN code can be changed to your desired four- digit number . Press ▲▼ to select [Logo PIN code 1 ) change]. Press the <ENTER> button. 2 ) Current logo PIN code dialog box appears. z Press ▲▼ to enter the current code.
Setting ENGLISH - 55 Settings Direct on Press ▲▼ to select [Direct on] and 1 ) then press the <ENTER> button. Press ▲▼ to switch between On and 2 ) Off. When this function is set to [On], the projector z will be automatically turned on just by connecting the AC power cord to a wall outlet.
Setting 56 - ENGLISH Settings Closed caption The closed caption is mainly used in the north America. This function shows the text information contained in the image signal. Captions may not be displayed on some devices or software. Press ▲▼ to select [Closed caption].
ENGLISH - 57 Settings Security This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Press ▲▼ to select [Security]. 1 ) Press ► or the <ENTER> button to 2 ) access the submenu.
Setting 58 - ENGLISH Settings Fan control Press ▲▼ to select [Fan control] and 1 ) then Press <ENTER> button. Press ▲▼ to select one among 2 ) options as below . Choose the running speed of cooling fans from z the following options according to the ground elevation under which you use the projector .
Setting ENGLISH - 59 Settings Filter counter reset J After replacing the lter , be sure to reset the timer . Press ▲▼ to select [Filter counter 1 ) reset]. Press the <ENTER> button. 2 ) [Filter counter Reset?] appears. Select [Y es] z to continue.
Information 60 - ENGLISH Settings Select [Information] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.
LAMP and W ARNING Indicators ENGLISH - 61 Maintenance LAMP and W ARNING Indicators Managing the indicated problems If a problem should occur inside the projector , the <ON(G)/ST ANDBY(R)>, <LAMP> and/or <WARNING> indicators will inform you.
62 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect z the power plug from the wall outlet. ( Æ pages 26, 30) Be sure to observe the procedure “T uring Off the Projector” ( z Æ page 30) when performing power supply operation.
Replacement ENGLISH - 63 Maintenance Replacing the unit Air lter unit J Filter prevents dust from accumulating on the optical elements inside the projector . Should the lter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector .
Replacement 64 - ENGLISH Maintenance J Lamp unit The lamp unit is a consumable component. Y ou can check the total usage time using Lamp runtime in the Information menu on page 60. It is recommended to ask an authorized engineer to replace the lamp unit.
Replacement ENGLISH - 65 Maintenance J Replacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face close to the projector . z Attach the lamp unit and the lamp cover securely . z When you experience difculty in installing the lamp, remove it and try again.
Replacement 66 - ENGLISH Maintenance Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, attach the lens cover . Attach the lens cover according to the following procedures. Thread the string through the hole on the 1 ) lens cover and then tie a knot in the string to secure it in place.
ENGLISH - 67 Maintenance T roubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page Power does not turn on. The power cord may not be connected. z — No electric supply is at the wall outlet.
T roubleshooting 68 - ENGLISH Maintenance Problem Cause Reference page Picture from a HDMI device does not appear or picture is not stable. Is the HDMI cable securely connected? z 25 T urn off the power of the projector and the connected devices. Then turn z the power of the projector and the connected devices back on.
ENGLISH - 69 Appendix T echnical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specication, so that the projector can be controlled by a personal computer which is connected to this connector .
T echnical Information 70 - ENGLISH Appendix J Basic format T ransmission from the computer begins with STX, then the command, parameter , and ETX are sent in this order . Add parameters according to the details of control. STX C1 C2 C3 : P1 P2 Pn ETX When sending commands without parameters, a colon (:) is not necessary .
T echnical Information ENGLISH - 71 Appendix J Cable specications [When connected to a computer] Projector 1 NC NC 1 Computer (DTE specications) 2 2 3 3 4 NC NC 4 5 5 6 6 7 7 8 8 9 9 J Control c.
T echnical Information 72 - ENGLISH Appendix Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <COMPUTER IN 1/COMPONENT J IN> terminal Outside view Pin No.
T echnical Information ENGLISH - 73 Appendix List of compatible signals The following table species the types of signals compatible with the projectors.
T echnical Information 74 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) SXGA+ 1400 x 1050 63.970 60.190 107.99 A 65.350 60.120 122.85 A C 65.120 59.900 122.
T echnical Information ENGLISH - 75 Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) WXGA 1280 x 768 47.776 59.870 79.50 AA ○ C 60.289 74.893 102.25 AA 68.633 84.837 1 17.
T echnical Information 76 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP Format H (kHz) V (Hz) D-WXGA 1360 x 768 47.700 60.00 86.67 A H 56.160 72.000 100.19 A 1366 x 768 46.500 50.
ENGLISH - 77 Appendix Specications Model No. PT -TW231RU Power supply AC100 V - 240 V 50 Hz/60 Hz Power consumption 100 V - 240 V 3.6 A - 1.8 A 310 W When [Standby mode] of [Setting] is set to [ECO]: 0.42W When [Standby mode] of [Setting] is set to [Network]: 9.
Specications 78 - ENGLISH Appendix Model No. PT -TW231RU T erminals COMPUTER IN 1/ COMPONENT IN 1 (D-sub 15 pin female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.
Ceiling mount bracket safeguards ENGLISH - 79 Appendix Dimensions <Unit : inch (mm)> Actual dimension may differ by product. : 6.56(166.7) 6.29(159.8) 0.55(14) 1.14(29) 1.46(37.1) 2.51(63.8) 5.65(143.5) 0.70(17.8) 0.34(8.7) 4.53(1 15) 3.54(90) 6.
80 - ENGLISH Appendix Index A About Y our Projector....................... 17 Accessories .................................... 15 Adjusting front adjustable feet ........ 24 Attaching the Lens Cover ............... 66 AUTO PC adjust ..................
Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2012 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic PTTW230U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic PTTW230U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic PTTW230U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic PTTW230U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic PTTW230U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic PTTW230U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic PTTW230U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic PTTW230U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
