Manuel d'utilisation / d'entretien du produit KX-TDE600 du fabricant Panasonic
Aller à la page of 210
Pure IP-PBX Operating Manual Thank you for purchasing a Panasonic Pure IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TDE100/KX-TDE200: PMMPR Software File V ersion 2.0000 or later KX-TDE600: PGMPR Software File V ersion 2.
Feature Highlights IP Communication This PBX supports IP communication using a variety of IP telephones, such as the KX-NT300 series with Self Labeling and/or Bluetooth wireless headsets, and SIP Extensions (SIP Hardphone/SIP Softphone).
This PBX supports Voice Processing Systems (VPS) with an ACD Report Server. In addition to VPS features, the ACD Report Server provides you with a variety of features, such as monitoring, reporting, and creating performance graphs, to manage call information efficiently.
In This Manual, • The following abbreviations are used: APT ® Analog Proprietary Telephone Display PT ® Proprietary Telephone with a Display DPT ® Digital Proprietary Telephone IP-PT ® IP Propri.
Notes for SIP Extension Users Before using a SIP Extension, please read the following notes. a. The following features are available for SIP Extension users: – Making calls – Answering calls – Holding calls – Transferring calls (You cannot go on-hook before the transferred party answers.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the fo.
Important Information SA VE THESE INSTRUCTIONS WARNING SAFETY REQUIREMENTS For All Telephone Equipment • The product may only be installed and serviced by qualified service personnel. • To prevent possible fire or electric shock, do not expose the product to rain or moisture.
SAFETY REQUIREMENTS For All Telephone Equipment • Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean with abrasive powders or with chemical agents such as benzene or thinner. Do not use liquid cleaners or aerosol cleaners.
7. When user information is sent from the PBX to a PC or other external device, the confidentiality of that information becomes the responsibility of the customer. Before disposing of the PC or other external device, ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically unusable.
Attention • When using a Panasonic proprietary telephone (PT), use only the correct Panasonic handset. • For users of PC Phone (Free License Version) shipped with KX-DT301/KX-T7601 USB Module: All features of the PC Phone software are available for 90 days from the date of installation.
F.C.C. REQUIREMENTS AND RELEVANT INFORMATION 1. Notification to the Telephone Company This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
network, the telephone company may request that you disconnect the equipment until the problem is resolved. 6. Connection to Party Line Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.
For 2.4 GHz Cell Station Privacy of communications may not be ensured when using the wireless systems. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
For DECT 6.0 Cell Station Privacy of communications may not be ensured when using the wireless systems. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
Table of Contents 1 Operation .. .............................................................................................. 19 1.1 Before Operating the Telephones .. ............................................................................... 20 1.
1.3.46 One-touch Dialing .. ....................................................................................................... 102 1.3.47 Paging .. ..................................................................................................
3.1.3 Programming Feature Clear .. ....................................................................................... 172 3.1.4 Customizing the Buttons .. ...........................................................................................
18 Operating Manual Document Version 2008-10 Table of Contents.
Section 1 Operation This chapter shows you step by step how to use each feature. Read this chapter to become familiar with the many useful features of this PBX.
1.1 Before Operating the Telephones 1.1.1 Before Operating the Telephones What Kind of Telephone Can Be Used? You can use the following types of telephone with this PBX: • Panasonic IP Proprietary Telephone (IP-PT) (e.g., KX-NT346 or KX-NT366) • SIP Extension (e.
If you use a single line telephone which does not have the " " or "#" keys; it is not possible to access features that have " " or "#" in their feature numbers. Tone You will hear various tones, during or after an operation, for confirmation.
Icon Descriptions The following icons show you the feature availability, notes and action to use the features. This feature cannot be used with a single line telephone. CO line group no. OR 8 9 OR (CO) Seize a CO line (One of the following). • Press the CO button.
When You Use a Panasonic Proprietary Telephone If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make operations simple.
TRANSFE R TRANSFER: Used to transfer a call to another party. HOLD HOLD: Used to place a call on hold. FLASH/ RECALL FLASH/RECALL: Used to disconnect the current call and make another call without hanging up. This button can also be used as a CANCEL button while on-hook.
(PF) Programmable Feature (PF): Located on the upper part of the Flexible button array or on the DSS Console. Assigns the desired button and used to access the stored feature. Mostly used as a One-touch Dialing button. (Only the "F and number" may be shown on some telephones.
Button Feature Call Forwarding (FWD)/Do Not Disturb (DND)—Both calls Used to forward all calls to a specified destination or refuse. FWD/DND—Outside calls Used to forward CO line calls to a specified destination or refuse. FWD/DND—Intercom calls Used to forward intercom calls to a specified destination or refuse.
Button Feature Time Service Switching Mode (Automatic/Manual) Used to switch the time service mode, Automatic or Manual. Two-way Record Used to record a conversation into your own mailbox. Two-way Transfer Used to record a conversation into the mailbox of a specific extension.
How to Follow the Steps An example of system operation is shown below. The DSS button light shows the current status as follows: Off: The extension is idle. Red on: Your or another extension is using the line. Customizing Your Phone 3.1.3 Customizing the Buttons Create or edit a Direct Station Selection (DSS) button.
Connection Example This diagram shows you a connection example. Doorphone & Door Opener External Music Source Pager/ Speaker Batteries Remote PC PC Printer Telephone Company PBX Amplifier External.
1.2 Basic Operations 1.2.1 Making Calls – Intercom Call – Operator Call – Calling an Outside Party Intercom Call You can call another extension user. PT/SLT/PS/SIP Extn. Off-hook. Talk. Dial extension number , or press DSS or SDN . OR extension no.
Operator Call You can call an extension or a group assigned as the operator. Off-hook. Enter 0 . 0 PT/SLT/PS/SIP Extn. Calling an Outside Party You have to seize a CO line before dialing an outside phone number because external calls are made via your PBX.
S-CO Line Access PT and SLT PT/PS Off-hook. Talk. Press S-CO . (S-CO) Dial outside phone number . outside phone no. • Each of the S-CO button or G-CO button light shows the current status as follows: Off: The line is idle. Red on: The line is in use.
• You can select one of the following methods to answer calls: – Lift the handset to receive the preferred line. (Default: Ringing line is selected.) – Press the SP-PHONE button. (Refer to "1.3.31 Hands-free Operation ".) – Press the flashing CO, INTERCOM, ICD Group, PDN, or SDN button directly.
1.3 Telephone Features and Operation 1.3.1 Absent Message You can show the reason you do not answer, if the caller uses a Panasonic display proprietary telephone. There are eight preprogrammed messages and one for your personal message (16 characters).
• Enter the desired value in the "%" positions. You must enter the correct number of characters as represented by the "%" using 0 to 9 or . • The preprogrammed messages can be changed through system programming. • To create your personal message (Message no.
1.3.3 Alternate Calling—Ring/Voice The caller can alternate the alerting method, either ring or voice, when making an intercom call. On the other hand, any extension can set the alerting method, either ring or voice, when receiving an intercom call.
To set (for both extension and CO line) PT/SLT/PS While hearing a busy tone Enter 6 . 6 On-hook. C.Tone To answer the callback ringing from an idle extension Off-hook. PT/SLT/PS Talk. While hearing a callback ringing R.B.Tone To answer the callback ringing from an idle CO line Off-hook.
1.3.5 BGM (Background Music) You can listen to the background music through your telephone speaker while on-hook. An external music source, such as a radio, must be connected. If your extension becomes busy (off-hook, making or receiving a call etc.), the music stops temporarily.
SLT During a conversation On-hook. Enter 50 . Press Recall/ hookswitch . 0 5 C.Tone SIP Extn. During a conversation On-hook. HOLD Press HOLD . Document Version 2008-10 Operating Manual 39 1.
Call Hold Retrieve Off-hook. Off-hook. Press DSS or dial holding extension number . Off-hook. At the holding extension (Call Hold Retrieve) To retrieve an outside call from another extension—only Re.
• The CO or INTERCOM button light shows the current status as follows: – Regular Hold mode Flashing green slowly : Your held call Flashing red : Another extension’s held call – Exclusive Call .
To set During a conversation Press Call Park . PT/PS (Call Park) Enter a specified parking zone number (2 digits) or press to park at an idle parking zone automatically. During a conversation Press TRANSFER . PT/PS On-hook. Enter 52 . parking zone no.
Off-hook. Enter 52 . Dial stored parking zone number (2 digits). stored parking zone no. PT/SLT/PS Talk. 2 5 C.Tone • If a call is parked automatically, confirm the parking zone number on the display. • If a call is not retrieved within a specified time , you will hear an alarm as a reminder (Call Park Recall).
• If you receive a call waiting tone , you can ask a third party to pick up your second call with Directed Call Pickup. Call Pickup Deny You can deny or allow other people to pick up your calls. Off-hook. On-hook. Enter 1 to deny or 0 to allow. PT/SLT/PS Deny Allow 1 0 OR Enter 720 .
To leave the conversation and then let the two parties talk PT/PS Talk to the other party. During a conversation Press TRANSFER . TRANSFE R Press TRANSFER . TRANSFE R C.Tone On-hook. Press DSS or dial the other party's extension number . extension no.
Transferring to an Extension in the PBX To transfer Press DSS or dial extension number . On-hook. Talk. During a conversation This step can be omitted. PT/PS Press TRANSFER . extension no. OR (DSS) TRANSFE R C.Tone Dial extension number . On-hook. Talk.
• For the transfer operation using an SDN button, refer to "1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension ". To transfer with one touch (One-touch Transfer) During a conversation with an outside party PT/PS Press DSS .
On-hook. Talk. During a conversation SLT Press Recall/ hookswitch . Dial outside phone number . C.Tone Seize CO line . CO line outside phone no. On-hook. Talk. During a conversation SIP Extn. Dial outside phone number . outside phone no. HOLD Press HOLD .
To send a call waiting PT/SLT/PS Enter 1 . 1 While hearing a busy tone • Depending on the type of the other party’s telephone , you may be able to talk to the other party using the speaker and the.
2. To hold the current call and then talk to the new party PT/PS Press HOLD . While hearing a tone Disregard this step if both parties are extensions. HOLD Talk to the new party. OR (CO) INTERCOM OR (ICD Group) (SDN) (PDN) OR OR Press CO , ICD Group , PDN , SDN , or INTERCOM .
PT/SLT/PS During a conversation Off-hook. On-hook. Talk to the original party. Enter 50. 0 5 C.Tone 2.2 To hold the second call and then talk to the original party After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party again.
SLT During a conversation Enter 50. 0 5 Talk to the original party. Press Recall/hookswitch . Off-hook. On-hook. Talk to the new party. Enter 50. 0 5 C.
Answering Call Waiting from the Telephone Company This is an optional telephone company service. You can receive a call waiting tone with the caller ’s name or telephone number information. For details, consult your telephone company. While hearing a tone While hearing a tone PT/SLT/PS Press FLASH/RECALL or EFA .
To set/cancel for outside calls (Automatic Call Waiting) Off-hook. Enter 0 or 1 . On-hook. PT/SLT/PS No tone Tone 0 1 OR Enter 732 . 3 2 7 C.Tone • To change the tone from a PT, refer to "3.1.2 Personal Programming". • For information about answering a waiting call, refer to "1.
Table 1 (Standard mode) Document Version 2008-10 Operating Manual 55 1.3.14 Character Entry.
Table 2 (Option mode) <Example> To enter "Ann" A 2 n n 6 (5 times) 6 (5 times) FWD/DND OR Note • To erase the character on the cursor, press CLEAR. • To move the cursor to the left, press . • To move the cursor to the right, press .
1.3.15 Conference – Conference – Leaving Three-party Conference Conference You can add one or more parties to your conversation. To establish a conference call Press CONF . Dial desired phone number . Seize CO line before dialing outside phone number.
Dial desired phone number . desired phone no. SLT Talk with multiple parties. Enter 3 . Press Recall/ hookswitch . Talk to the new party. 3 During a conversation Seize CO line before dialing outside phone number.
To add four or more parties to a conference Press CONF . Press CONF . Dial desired phone number . desired phone no. Seize CO line before dialing outside phone number.
During a conversation SLT Press Recall/hookswitch . To disconnect one party and then talk to the other in a three-party conversation PT/PS Press TRANSFER once or twice to establish a conversation with the party to be disconnected. TRANSFE R During a conversation Press FLASH/RECALL .
To leave a conference involving at least one other extension During a three-party conference PT/SLT/PS On-hook. To leave a conference involving two outside parties During a three-party conference PT/PS Press TRANSFER . TRANSFE R On-hook. During a three-party conference SLT Press Recall/hookswitch .
To leave a conference PT/PS Press CONF . During a 3- to 7-party conference CONF On-hook. To return while others are talking PT/PS Press flashing green CO , ICD Group , PDN , SDN , or INTERCOM . OR (CO) INTERCOM (SDN) (PDN) OR OR OR (ICD Group) To complete a conversation During a conversation On-hook.
To set/cancel Off-hook. On-hook. Enter 1 to set or 0 to cancel. PT/SLT/PS Set Cancel 1 0 OR Enter 730 . 3 0 7 C.Tone 1.3.18 DISA (Direct Inward System Access) – Calling through DISA Calling through .
To call an extension Dial DISA phone number . DISA phone no. From Outside Telephone In No Security Mode/Trunk Security Mode Off-hook. Off-hook. Dial DISA phone number . Enter extension PIN or verification code PIN (max.10 digits). DISA phone no. In All Security Mode Enter 47 .
To call an outside party In No Security Mode Dial DISA phone number . In Trunk Security Mode/All Security Mode From Outside T elephone Off-hook. Off-hook. 7 4 Enter 47 . Seize CO line before dialing outside phone number. Dial outside phone number . outside phone no.
CAUTION There is a risk that fraudulent telephone calls will be made using the CO-to-CO Line Call feature of DISA. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend: a.
• The FWD/DND button light shows the current status as follows: Off: Both features are not set. Flashing red slowly: FWD mode Red on: DND mode • The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode. Ask your manager what mode your system is in if you are not sure.
To call Enter 1 . PT/SLT/PS Talk. R.B.Tone 1 extension no. Dial extension number . DND Tone Off-hook. Switching FWD/DND Status Using Fixed FWD/DND Button Using a proprietary telephone (PT), you can easily switch the FWD/DND status for outside/ intercom calls without clearing any FWD destination that was set previously.
To set and clear FWD/DND for outside/intercom calls PT FWD/DND AUTO DIAL STORE Enter 1 or 2 . Press the fixed FWD/DND button. Press STORE . 0 FWD/DND off DND on 1 While on-hook (when in FWD/DND Setting Mode) AUTO DIAL STORE Press STORE to set. 1 2 Intercom Calls Outside Calls OR A confirmation tone will be heard.
• The door open will be triggered for a specified time period. 1.3.21 Doorphone Call Preprogrammed extensions or an outside party can receive a call from a doorphone, and talk to the person through the doorphone. To call from the doorphone Press doorphone button.
1.3.22 EFA (External Feature Access) You can access special features (e.g., Call Waiting offered by a host PBX or telephone company. This feature is only effective for an outside call. <Example> To hold the current call and then talk to the new party PT/PS SLT Enter desired service code .
To join an intercom call Enter 3 . 3 PT/SLT/PS Talk. C.Tone During a conversation C.Tone Talk. A three-party conversation is now established. Parties in the conversation Party joining the call Off-hook. B. Tone Dial extension number , or press red PDN or SDN .
To talk to each party alternately Talk to the other party. During a conversation PT/PS Press TRANSFER . TRANSFE R To continue Executive Busy Override Deny A preprogrammed extension user can prevent his calls from being interrupted by another extension user (Default: Allow other users to interrupt calls).
To unlock Off-hook. On-hook. PT/SLT/PS Enter 77 . Enter 0 . 0 7 7 C.Tone PIN: Personal Identification Number extension PIN Enter extension PIN (max. 10 digits). • If you forget the extension PIN or cannot unlock your extension , consult your manager.
Features Default Setting Paging Deny Allow Timed Reminder Cleared Do Not Disturb (DND) *1 Off Call Waiting *1 Enable—Tone Executive Busy Override Allow BGM Off Data Line Security Off Paralleled Telephone The telephone in parallel rings. Log-in/Log-out Log-in *1 These features may not be reset, depending on system programming.
To set PT/SLT/PS Off-hook. Enter 799 . 1 Enter 1 . Enter extension PIN (max. 10 digits). extension PIN # Enter # . same extension PIN # Enter # . On-hook. Enter same extension PIN (max. 10 digits). 7 9 9 C.Tone PIN: Personal Identification Number To cancel PT/SLT/PS Off-hook.
To switch on the relay Off-hook. Enter relay number (2 digits). relay no. PT/SLT/PS C.Tone Enter 56 . 6 5 On-hook. • The relay will be switched off after a specified time period. 1.3.28 External Sensor Preprogrammed extensions can receive an alert call from an external sensor (e.
FWD (Call Forwarding) You can have your incoming calls forwarded to a specified destination. All Calls: All calls are forwarded. Preset extensions may also forward from their own receiving group. Busy: All calls are forwarded when your extension is busy.
To set/cancel PT/SLT/PS Enter # . On-hook. Enter destination extension number . Or enter CO line access number and then outside phone number . 2 0 3 4 5 Cancel All Calls Busy No Answer Busy/No Answer Enter required number . Off-hook. 1 2 0 Both Calls Intercom Calls Outside Calls OR OR Enter 71 .
To set the timer for "No Answer" and "Busy/No Answer" Off-hook. Enter time ( seconds [2 digits]). time PT/SLT/PS Enter 713 . On-hook. 1 3 7 C.Tone Call Forwarding (FWD) for your Incoming Call Distribution Group PT/SLT/PS 0 1 Set Cancel OR Enter 1 to set or 0 to cancel.
• The FWD/DND button light shows the current status as follows: Off : Both features are not set. Flashing red slowly : FWD mode Red on : DND mode • The Group FWD button light shows the current status as follows: Off : No set Flashing red slowly : FWD mode • The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode.
FWD/DND Settings Using Fixed FWD/DND Button Using a proprietary telephone (PT), you can easily switch the FWD/DND status, and set the forward destination for outside/intercom calls with the FWD/DND button (fixed button). It is also possible to set outside telephone numbers (e.
To set and clear FWD/DND for outside/intercom calls PT Enter destination extension number, or CO line access number and then outside phone number . FWD/DND AUTO DIAL STORE Enter 1 or 2 .
To set forwarding status and outside destinations to ring in parallel for outside calls to an ICD group PT Enter CO line access number and then outside phone number . FWD/DND AUTO DIAL STORE Enter 4 to 7 . Press the fixed FWD/DND button. Press STORE .
To set/cancel Press AUTO ANS . While on-hook PT AUTO ANS MUTE • The AUTO ANS button light shows the current status as follows: Off: Not set Red on: Set • PS users: Refer to "Operating Instructions" for PS. 1.3.31 Hands-free Operation You can have a conversation in hands-free mode using the SP-PHONE button.
– Answer/Release Button Headset Operation You can have a conversation using a headset. In this case, you must select "Headset on" in programming mode or set the Headset button on (red) in advance. This feature is also known as Handset/Headset Selection.
• For KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephone users: • With the KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones, you can use a Bluetooth wireless headset registered on your extension as a headset.
To transfer a call PT During a conversation Press DSS or dial desired phone number . The called party answers. Seize CO line before dialing outside phone number. Press TRANSFER . TRANSFE R Press Release. (Release) (DSS) desired phone no. OR To talk to a waiting caller Press Answer .
Customizing Your Phone • 3.1.4 Customizing the Buttons Create or edit an Answer button or a Release button. 1.3.33 HOSPITALITY FEATURES In a hotel-type environment, an extension assigned as a hotel operator can be used to view and set the check-in/check-out/cleaned-up (Ready or Not Ready) *1 status of each guest room extension.
To dial Off-hook. PT/SLT/PS • To call another party , dial the desired party’s phone number before the preprogrammed number is dialed. • You should assign the intercom line as the seized line when going off-hook.
1.3.36 ICD Group Features—Call Log History for ICD Group An extension assigned as a supervisor (supervisor extension) can confirm the incoming call log for the incoming call distribution (ICD) group. To perform this operation, the supervisor has to enter incoming call queue monitoring mode first.
To clear Call Log History Press "CLEAR" . Since JAN.29 09:10AM Total Calls : 00996 Overflow Calls : 00131 Lost Calls : 00039 Average Waiting : 01'06 EXIT CLEAR While the Call Log Histor.
• For information about other supervisory features, refer to "1.3.41 ICD Group Features— Supervisory". 1.3.38 ICD Group Features—Log-in/Log-out You can control your status in an incoming call distribution (ICD) group. When in the Log-out mode, incoming calls to the group will not ring at your extension.
While on-hook PT/PS Press Log-in/Log-out . (Log-in/Log-out) Specified OR All ICD Group extension no. Enter ICD Group extension number or . ICD Group: Incoming Call Distribution Group While on-hook PT/PS Press Log-in/Log-out of a Specified Group . (Log-in/Log-out of a Specified Group) To enter/leave Not Ready mode PT/SLT/PS On-hook.
• * The status will be as follows: Ready ® Not Ready Not Ready ® Ready Wrap-up ® Not Ready • The Log-in/Log-out of a specified group button light shows the current status as follows: Off : Log-in mode Red on : Log-out mode • The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready mode.
To enter incoming call queue monitoring mode On-hook. Enter ICD Group extension number . Off-hook. 6-Line Display PT Enter 739 . 3 9 7 C.Tone ICD Group extension no. Group Monitor On To monitor the Log-in/Log-out status Press "SPRVS" . While the display is in incoming call queue monitoring mode JAN.
• Depending on the current status of the ICD group member, pressing the DSS button changes the status as follows: Log-in mode (Not Ready) ® Log-in mode (Ready) Log-in mode (Ready) ® Log-out mode Log-out mode ® Log-in mode (Ready) • For information about other supervisory features, refer to " 1.
Features Description Incoming Call Queue Monitor The supervisor extension can monitor the status of calls waiting in the queue to be answered. ( ® 1.3.
• For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES". 1.3.42 Message Waiting For a caller When the called extension is busy or does not answer your call, you can leave a notification so that the called party may call you back.
To check the left message and call back While on-hook PT/PS Press MESSAGE until the desired extension appears. Off-hook. Talk. MESSAGE To call back Off-hook. Press MESSAGE or enter 70 and then 2 . PT/SLT/PS Talk. OR MESSAGE 0 2 7 To clear message waiting indications left on your extension PT/SLT/PS Off-hook.
1.3.43 Mute You can disable the microphone or the handset to consult privately with others in the room while listening to the other party on the phone through the speaker or the handset.
1.3.45 OHCA (Off-hook Call Announcement) During a conversation, you can be informed of a waiting call with a voice announcement. You can hear the caller’s voice through the built-in speaker, and talk to the caller while the current call is continued using the handset.
1.3.47 Paging – Group Paging – Paging and then Transferring a Call – Paging Deny Group Paging You can make a voice announcement to proprietary telephones or external speakers or both in the preset group simultaneously. A person who has been paged can answer the page at any extension.
Paging and then Transferring a Call You can transfer a call after making paging announcements. Announce. Talk. On-hook. During a conversation PT/SLT/PS Enter 33 . Wait for an answer The held party and the paged extension are connected and start a conversation.
Off-hook. On-hook. DPT Enter 1 to ring or 0 not to ring. Ring No ring 1 0 OR Enter 39 . 3 9 C.Tone • Even if "No ring" is selected, calls can be made and answered on the single line telephone by lifting the handset. • If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
Light Pattern PDN Button Status SDN Button Status Flashing green slowly A call is on hold at the PDN extension (Regular Hold). A call answered with the SDN button is on hold (Regular Hold). Flashing green moderately A call is on hold temporarily or on Exclusive Call Hold.
• When performing SDN Direct Dial to call the corresponding PDN extension, the SDN button light shows the current status of the destination extension as follows: Green on : You are using the line.
• If Automatic Call Hold has been preprogrammed, you can put the current call on hold automatically by pressing another PDN button to make or answer another call. Call Transfer Using SDN Button You can transfer a call to a PDN extension with a simple operation using a corresponding SDN button.
To record Off-hook. On-hook. Enter 761 . Enter message number (1 – 8). Enter parameter if required. PT/SLT parameter Enter # . 76 1 message no. C.Tone * • * Depending on the content of the selected message, you may be required to enter a numeric parameter, such as a price or time.
To let a third party join your conversation and establish a three-party conversation Press green S-CO . Wait for an answer. To prolong, press the S-CO again. PT/PS Talk. C.Tone Off-hook. Y our extension (on the outside call) The S-CO button will flash at all extensions that have that S-CO button.
1.3.53 Private Network Features—CLIR (Calling Line Identification Restriction) When making a call through a private network, you can select whether the called party can see your telephone number or not. To show/prevent On-hook. Off-hook. PT/SLT/PS Enter 7 1 .
1.3.55 Private Network Features—COLR (Connected Line Identification Restriction) When receiving a call through a private network, you can select whether the caller can see your telephone number or not. To show/prevent On-hook. Off-hook. PT/SLT/PS Show Prevent 0 1 OR 0 7 Enter 7 0 .
To prevent (not show) Off-hook. KX-HGT100 6 Enter 67 . Dial outside phone number . outside phone no. 7 Availability of this feature depends on the following: • The ISDN service of the other party’.
• To start monitoring another PBX extension after customizing an NDSS button, go off-hook, press the NDSS button, and go on-hook. The NDSS button light will show the current status as follows: Off : The extension is idle. Red on : The extension is busy.
1.3.60 Room Status Control In a hotel-type environment, an extension assigned as a hotel operator can check guests into or out of rooms and confirm that the room is clean and ready for the next guest by changing the room status of the corresponding extension.
To check in a guest Press Check-in . Dial extension number and then press "ENTER", or press desired DSS . OR extension no. (DSS) While on-hook ENTER Press "YES" .
To check out a guest Press Check-out . While on-hook Dial extension number and then press "ENTER", or press desired DSS . OR (Check-out) Press "YES" .
To change the cleaning status of a room (KX-TDE600 only) Press Cleaned-up . Dial extension number and then press "ENTER", or press desired DSS .
To switch display KX-NT366 Press NEXT PAGE to display the desired page. • When you answer an incoming call or when you seize a CO line, the display automatically changes to the page that contains the green lit button. • After customizing each button, you can set the displayed text for the button.
• To call using a directory, refer to "1.4.3 Directories". • A KX-HGT100 user can store and dial personal speed dialing numbers in his/her own telephone. Refer to the Quick Reference Guide of the KX-HGT100 for instructions. 1.3.63 Speed Dialing, System You can make calls using speed dialing numbers stored in the PBX.
• Operation Reference When Accessing Your Message Box After entering the SVM feature number ( 38), the operations below are available by entering the corresponding numbers.
To play back PT/SLT/PS Off-hook. Enter 38 . 2 Enter 2 . 8 3 C.Tone On-hook. The greeting message is played back. 1 0 Clear Rerecord OR Enter 0 or 1 while the greeting message is being played back. * A confirmation tone is heard. • * This step can be omitted.
To record PT/SLT/PS On-hook. Off-hook. Enter 38 . 8 Enter 8 . 8 3 C.Tone Record message. 1 0 2 3 Day Night Lunch Break Enter the desired time mode . 1 Enter 1 . Example: "You have reached John. I am sorry I am out for lunch right now. Please leave a message.
To clear 0 Enter 0 . C.Tone On-hook. PT/SLT/PS Off-hook. Enter 38 . 8 Enter 8 . 8 3 1 0 2 3 Day Night Lunch Break Enter the desired time mode. • If both the greeting message for a certain time mode and the normal greeting message have been recorded, callers will hear the greeting message for that time mode.
• The default floating extension number for the SVM feature is 591. Leaving Voice Messages If the extension user you called is not able to answer your call, and your call is redirected to the message box, you will hear the greeting message. Then, you can leave a voice message for that extension.
To listen to voice messages While on-hook PT/PS Press MESSAGE until desired SVM Log appears. Off-hook. MESSAGE PT/SLT/PS Off-hook. Enter 38 . 8 3 3 Enter 3 . PT/SLT/PS Off-hook. MESSAGE OR Press MESSAGE or enter 702 . 7 0 2 To clear the voice message that you are listening to PT/SLT/PS While hearing the voice message 3 Enter 3 .
Operation No. Operation 3 To clear the voice message (Press the AUTO DIAL/STORE button or enter 1 to confirm.) 4 To call back the caller who left the voice message 5 To go back to the previous voice message # 6 To leave a voice message directly in the message box of another extension (Enter desired extension number.
To listen to voice messages while your display is locked Off-hook. PT/SLT/PS 7 4 Enter 47 . extension PIN extension no. your extension no. Dial your extension number . Enter extension PIN (max. 10 digits). If the wrong extension PIN is entered, you hear an alarm tone.
Accessing Your Message Box from an Outside Telephone You can remotely access your message box and perform any operations of the SVM feature through a CO line as if you were at your own extension. From Outside Telephone Off-hook. Enter 38 . 8 3 Dial desired phone number of a destination that has set the SVM feature.
Accessing the Message Box of Another Extension from Your Extension You can access the message box of another extension (for example, to record a greeting message for that extension) by following the steps below: Off-hook. PT/SLT/PS 7 4 Enter 47 . extension PIN Dial desired extension number .
• This feature can also be set remotely by an extension assigned as a hotel operator (Remote Wake-up Call). The most recent setting will be valid no matter which extension made the setting. For information about setting a Remote Wake-up Call, refer to "1.
To confirm PT Press TRANSFER several times. TRANSFE R • You can also confirm the timed reminder by using the soft button. • The alarm keeps ringing for preprogrammed seconds. • If you receive an incoming call during ringback, the ringing starts after the ringback stops.
1.3.68 Verification Code Entry You can use your calling privileges (Class of Service) at another extension. You can override restrictions which have been set at that extension. To use this feature, a verification code and verification code PIN (Personal Identification Number) are required.
1.3.70 Voice Mail Features—LCS (Live Call Screening) Using a Panasonic Voice Processing system that supports digital integration (e.g., KX-TVA series), you can monitor a call without answering while the caller is leaving a message in your mailbox. If you so desire, you can answer the call while monitoring.
Operation Flowchart The operations in the shaded areas can be done hands-free. Hands-free Mode Private Mode Stop monitoring Answering the call Stop monitoring Answering the call Monitoring Monitoring (Hands-free) Monitoring (Handset) No operation Stop monitoring Answering On-hook.
1.3.71 Voice Mail Features—Two-way Record Using a Panasonic Voice Processing system that supports digital integration (e.g., KX-TVA series), you can record a conversation into a mailbox while talking on the phone. You can select the mailbox each time you record a conversation.
• Note: Many states have imposed regulations on the manner in which 2-way telephone conversations may be recorded, so you should inform the other party that the conversation is being recorded. Consult your local telephone company for further information.
To transfer a call to a mailbox (Voice Mail Transfer) Press DSS or enter desired extension number . Press Voice Mail Transfer . PT/PS (Voice Mail Transfer) During a conversation OR (DSS) desired extension no. To listen to messages Press MESSAGE or enter voice mail floating extension number .
• This feature can also be set from a room extension (Timed Reminder). The most recent setting will be valid no matter which extension made the setting. For information about setting a Timed Reminder, refer to "1.3.66 Timed Reminder". To set On-hook.
To confirm On-hook. Display PT Confirm the Timed Reminder information. C.Tone Off-hook. 2 Dial extension number or press desired DSS . OR extension no.
To make a call or set features from another extension Off-hook. 7 4 Enter 47 . extension PIN your extension no. Dial your extension number . Enter extension PIN (max. 10 digits). If a wrong extension PIN is entered, you hear an alarm tone. Dial desired phone number or desired feature number.
To exchange your settings with another extension Off-hook. Enter 727 . PT/SLT your extension no. On-hook. Dial your extension number. extension PIN Enter extension PIN (max. 10 digits). 2 7 7 D.Tone PIN: Personal Identification Number • An extension personal identification number (PIN) is required to use this feature.
<Example (a)> When using extension settings at a different location Service-out Extn. No. 101 Service-out Extn. No. 101 Service-in Extn. No. 102 Service-out Service-in Service-out Extension status of Telephone A Service-in Extn. No. 101 Extension status of Telephone B Service-out Service-out Service-out Main Office Branch Office Extn.
To set an extension to Service-out status Off-hook. PT/SLT Enter 727 . On-hook. 2 7 7 Enter # . To set an extension to Service-in status and have your own settings available Off-hook. PT/SLT Enter 727 . your extension no. On-hook. Dial your extension number.
• Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary telephones. In addition, both you and the other party must use supported telephones. • Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer to "1.
1.4 Display Features 1.4.1 Call Log, Incoming When you receive an outside call or an external sensor call, call information is recorded automatically in the incoming call log. A preprogrammed number of calls can be logged per extension. When the call log is full and other call arrives, the oldest call is deleted.
The incoming call log information is displayed as follows: *: " New " is displayed for call logs which have not previously been viewed; " Old " is displayed for call logs which have previously been viewed. [With Caller's Name] Catherine OCT.
To clear the log information Press TRANSFER . Display PT While viewing the log information TRANSFE R Press Call Log , or Up or Down until desired party appears. (Call Log) OR To call Off-hook. While viewing the log information Display PT Press Call Log , or Up or Down until desired party appears.
To call KX-NT300/KX-DT300/KX-T7600 Press Left . Press Up or Down until desired number appears. Off-hook. While on-hook To call with the REDIAL button Display PT Off-hook. While on-hook REDIAL REDIAL Press REDIAL to display the outgoing call log.* Press REDIAL until desired number appears.
<Operation Example: Storing the caller’s information in personal speed dialing> Press Enter name . Press Press OCT.27 03:13PM THU PROG INFO RING MENU 1234567890 106 ->12341115678 0001112223333 301 EXIT CLEAR ENTER 1 2 3 5 4 [Initial Display] Outgoing Call Log EXIT ENTER Press until desired number is selected.
1.4.3 Directories You can select and call using the directories ( Personal Speed Dialing Directory, System Speed Dialing Directory and Extension Number Directory ).
<Operation Example: Storing a name and an outside phone number in the Personal Speed Dialing Directory> Enter the name to be displayed for the number. 12341115678 PROG <- CLEAR STORE 00: 12341115678 Name? EXIT ENTER 00: 12341115678 Ann ABCD EXIT CLEAR ENTER Press to store.
To select a feature from the "Feature Access" menu KX-NT300/KX-DT300/KX-T7600 Press Right four times. Press Up or Down until the desired feature is selected, and follow the display prompts. Press ENTER . While on-hook Features Description Call Back Cancel You can cancel Automatic Callback Busy.
<Display Prompts> Sure? NO YES ->Call Back Cancel Call Pickup Directed Call Pickup Group Doorphone Call Door Open EXIT ENTER Call Back Cancelled Extension No. > EXIT SET Call Back Cancel ->Call Pickup Directed Call Pickup Group Doorphone Call Door Open EXIT ENTER 12341115678 MENU Group No.
Pager No. > EXIT SET ->External BGM Paging External Relay ON Call Back Cancel Call Pickup Directed EXIT ENTER External BGM 1 - 2 [External BGM] Enter BGM number and press Press or ENTER BGM No. > EXIT SET Enter pager number and press Door No.
Relay No. > EXIT SET [External Relay ON] Enter relay number and press Press or ENTER Group No. > EXIT SET Pager01 [Paging] Enter paging group number and press Press or ENTER External BGM ->Pa.
Section 2 Manager Operation This chapter shows the manager how to control the other extensions or the PBX. Document Version 2008-10 Operating Manual 157.
2.1 Manager Service Features 2.1.1 Dial Tone Transfer The manager can change the restriction level, permitting an extension to make a call. During a conversation with an extension PT/PS (Toll Restriction) Press Toll Restriction . On-hook. The extension can hear the dial tone and then make a call.
1. DISA message : Used to greet and guide callers so that they access extension user group or outside party without operator assistance. 2. Incoming Call Distribution Group message : Used to greet and guide callers to an incoming call distribution group.
To record from an external BGM (MOH) port PT On-hook. Off-hook. Enter 3 . 3 Press STORE . When the time limit passes, it stops automatically. The message is played back. The message is recorded. You hear the message. Press CONF . 3 6 AUTO DIAL STORE CONF Progress Tone & C.
PT and SLT PT/PS Off-hook. (NDSS) Dial another PBX extension number and then enter #, or press NDSS . another PBX extension no. OR C.Tone On-hook. Enter 784 . 78 4 • To restart monitoring of an extension after performing this operation, go off-hook, press the corresponding NDSS button, and go on-hook.
To change the time mode (Day/Night/Lunch/Break) PT/PS Press Time Service (Day/Night/Lunch/Break) until the desired mode appears. (Time Service (Day/Night/ Lunch/Break)) While on-hook PT/SLT/PS Off-hook. On-hook. Enter 780. 1 0 2 3 Day Night Lunch Break Enter 0 to 3 as you desire .
Section 3 Customizing Your Phone & System This chapter shows you how to customize your individual telephone or PBX according to your needs. Find the desired setting and program as necessary.
3.1 Personal Programming 3.1.1 Programming Information You can customize your telephone features. For example, you can change the initial settings or button features according to your needs.
Item Programming Input Selection & Parameter Your extension information 0 0 PT: The display shows the PBX or shelf number, slot number and port number. (Some IP-PTs may not display the extension number.) <example for users of KX-TDE100/KX-TDE200> EXT1050:10308 PBX no.
Item Programming Input Selection & Parameter Display Backlight Selection *1*2 Would you like to turn on the display backlight of the telephone? 0 4 0 Yes—Automatic 1 Yes—always On 2 No—alway.
Item Programming Input Selection & Parameter Preferred Line Assignment —Incoming Which line do you prefer to answer when you go off-hook? 2 0 0 No line 1 The longest ringing line (when multiple calls arrive) 2 + CO button no.
Item Programming Input Selection & Parameter Manual Call Waiting How would you prefer to receive call waiting notifications for intercom calls? 3 1 0 No call (OFF) 1 Tone (BSS) 2 Voice announcemen.
Item Programming Input Selection & Parameter Headset Operation *1 Do you use the headset? 6 1 0 No—Headset off 1 Yes—Headset on Executive Busy Override Deny Do you prohibit other people from j.
Item Programming Input Selection & Parameter Extension Dial Lock To prevent other people from using your telephone 9 1 extension PIN (max. 10 digits) + 0 To unlock extension PIN (max. 10 digits) + 1 To lock Display Lock *1 To prevent other people from seeing your personal speed dialing directory, call log, SVM log 9 2 extension PIN (max.
To store the names and numbers in personal speed dialing Press PROGRAM or PAUSE . Enter 10 and then press ENTER . Or press STORE . Enter personal speed dialing number (location number) (2 digits). personal speed dialing no. (location no.) Enter phone number (max.
To edit the names and numbers of personal speed dialing Press PROGRAM or PAUSE . PROGRAM PAUSE OR Enter 10 and then press ENTER . Or press STORE . 0 1 OR AUTO DIAL STORE Press ENTER or STORE . OR AUTO DIAL STORE Press Left or Right to select a desired part.
Features Default Setting LCS Mode Set (After Answering) Stop recording Automatic Call Waiting On Manual Call Waiting—Intercom Calls On (Tone) Call Waiting Tone Type Selection Tone 1 Absent Message O.
3.1.4 Customizing the Buttons You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons. • To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Button Programming Input Group FWD—Intercom calls 4 6 + Incoming call distribution group extension no. Account 4 8 Conference 4 9 Terminate 5 0 External Feature Access (EFA) 5 1 Call Park 5 3 + Parking zone no.
Button Programming Input Primary Directory Number (PDN) 7 1 Secondary Directory Number (SDN) 7 2 + Extension no. + # + delayed ringing time (0–7) *7 Check-in *4 8 0 Check-out *4 8 1 Cleaned-up *4*8 8 2 Two-way Record *9 9 0 + Voice mail floating extension no.
• You can select the parameter with the Navigator key (Up or Down) instead of entering a number. <Programming Example: Customizing a CO button as a One-touch Dialing button using Secret dialing> Press (CO) Enter the programming input ( ), and desired phone number .
To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button (Digital proprietary telephone only) Press PROGRAM . Press ENTER or STORE .
3.2 Manager Programming 3.2.1 Programming Information The manager can program the following item. • Other Extensions Control Available Extension The extension assigned as a manager Required Telephone A Panasonic Proprietary Telephone with display (over 2 lines) (e.
Item Programming Input Locking/unlocking other extensions. (Remote Extension Dial Lock) 9 0 + + Extension no. + 1 (to lock)/ 0 (to unlock) + Clearing the PIN and PIN lock for extensions. 9 1 + + Extension no. + Clearing the PIN and PIN lock for verification codes.
<Programming Example: Changing the manager password> Enter the current manager password . The current manager password appears. Enter a new manager password (max.
3.3 System Programming 3.3.1 Programming Information You can customize your system according to your requirements. [Your system already has default settings (factory installed).
Fixed Buttons Function KX-NT300/KX-DT300 KX-NT136/KX-T7600 KX-T7200/KX-T7400 *1 FWD/DND CONF AUTO DIAL STORE STORE (ENTER) None Back to Previous Menu (CANCEL) SHIFT SHIFT SHIFT SHIFT PAUSE PAUSE PROGR.
1. Entering the programming mode Enter system password . Enter . system password Press PROGRAM or PAUSE . OR PROGRAM PAUSE 2. Programming You can enter each program number (3 digits). • To exit the programming mode at any time, lift the handset. 3. Exiting the mode Press PROGRAM or PAUSE .
3.3.2 System Programming [000] Date & Time The proprietary telephones display the current date and time while on-hook. Enter 000 . Press ENTER . Enter date (01–31). date Enter year (00–99). year Enter hour (01–12). hour Enter minute (00–59).
[001] System Speed Dialing Number You can store the phone numbers of frequently dialed numbers. Press ENTER . Enter 001 . Enter phone number (max. 32 digits). Press END . phone no. Press PREV . Press NEXT . Press CANCEL . To continue To end Press ENTER .
[002] System Speed Dialing Name You can store the name associated with the speed dialing number. These names are displayed when making calls using the display operation. To enter characters, refer to "1.3.14 Character Entry". Press ENTER . Enter 002 .
To enter characters, refer to "1.3.14 Character Entry". Press ENTER . Enter 004 . Press ENTER . Press END . Press CANCEL . Press NEXT . Press PREV . To continue To end 004 Enter extension number . extension no. Enter name (max. 20 characters).
Section 4 Appendix This chapter provides the Troubleshooting, the Feature Number Table and Tone List. Check the Troubleshooting section before consulting your dealer.
4.1 Troubleshooting 4.1.1 Troubleshooting Troubleshooting Problem Remedy The telephone does not work properly. • Confirm with your manager that your settings are correct. • If the problem persists, consult your dealer. The telephone does not respond when buttons are pressed.
Problem Remedy A reorder tone is audible or "Restricted" is displayed. • The telephone is locked. Unlock your telephone. ( 1.3.24 Extension Dial Lock, 2.1.5 Remote Extension Dial Lock) • Toll restriction is activated. Consult your manager or dealer.
Problem Remedy I cannot send a call waiting tone to the dialed extension. • The other party has not set the Call Waiting feature. ( 1.3.13 Call Waiting Tone, 1.3.45 OHCA (Off-hook Call Announcement), 1.3.77 Whisper OHCA) • The other party has set Data Line Security.
4.2 Feature Number Table 4.2.1 Feature Number Table Numbers listed below are the default settings. There are flexible feature numbers and fixed feature numbers. If you change the flexible feature numbers, fill in your assigned numbers (new) in the list for future reference.
Feature (While dial tone is heard) Default (New) Additional digits/buttons – Group 40 ( ) group no. (2 digits) – Directed 41 ( ) extension no. Call Pickup Deny 720 ( ) – To deny 1 – To allow 0 1.3.12 CALL WAITING FEATURES Answering Call Waiting in the PBX 50 ( ) Answering Call Waiting from the Telephone Company 60 ( ) 1.
Feature (While dial tone is heard) Default (New) Additional digits/buttons 1.3.21 Doorphone Call 31 ( ) doorphone no. (2 digits) 1.3.22 EFA (External Feature Access) 60 ( ) service code 1.3.23 Executive Busy Override Executive Busy Override Deny – To prevent 733 ( ) 1 – To allow 0 1.
Feature (While dial tone is heard) Default (New) Additional digits/buttons – Outside Calls 715 ( ) – Intercom Calls 716 ( ) 1.3.34 Hot Line 740 ( ) – To store 2 + phone no. + # – To set 1 – To cancel 0 1.3.37 ICD Group Features—Incoming Call Queue Monitor *1 739 ( ) ICD group extension no.
Feature (While dial tone is heard) Default (New) Additional digits/buttons – Your extension 2 1.3.53 Private Network Features—CLIR (Calling Line Identification Restriction) 7 1 ( ) – To show 1 – To prevent 2 1.3.54 Private Network Features—COLP (Connected Line Identification Presentation) 7 2 ( ) – Public 1 – Your extension 2 1.
Feature (While dial tone is heard) Default (New) Additional digits/buttons Recording a Greeting Message for Each Time Mode – To record 8 + 0 (Day)/1 (Night)/2 (Lunch)/3 (Break) + 1 – To play back .
Feature (While dial tone is heard) Default (New) Additional digits/buttons – Intercom Calls 712 ( ) 3 (Busy)/ 4 (No Answer)/ 5 (Busy/No Answer) + voice mail floating extension no. *3 + # 1.3.73 Wake-up Call *4 76 ( ) – To set 12H: 1 + extension no.
Feature (While dial tone is heard) Default (New) Additional digits/buttons 2.1.5 Remote Extension Dial Lock – To unlock 782 ( ) extension no. – To lock 783 ( ) extension no. 2.1.6 Time Service Mode Control *7 780 ( ) – Day/Night/Lunch/Break 0/1/2/3 *1 Supervisor only *2 The default floating extension number for the SVM feature is 591.
4.3 Tone 4.3.1 Tone While on-hook Ring Tones The following tones are programmable allowing recognition of call type (Outside, Intercom or Doorphone). Tone 1 1 s Tone 2 1 s Tone 3 1 s Tone 4 1 s When going off-hook Dial Tones Tone 1 Normal 1 s Document Version 2008-10 Operating Manual 201 4.
Tone 2 • When there are messages that have previously been listened to and no new messages recorded by the SVM feature • When any of the following features are set: • Absent Message • Backgrou.
Tone 1 1 s Tone 2 1 s Do Not Disturb (DND) Tone The dialed extension is refusing incoming calls. 1 s While off-hook Indication Tones Tone 1 Call waiting tone 15 s Tone 2 A call is on hold longer than .
Tone 3 • Before the following features activate: • Retrieving a held call • Picking up another call • Paging/Answering a paging announcement • Answering the call through a speaker • When a.
Index Document Version 2008-10 Operating Manual 205.
Symbols [000] Date & Time 185 [001] System Speed Dialing Number 186 [002] System Speed Dialing Name 187 [003] Extension Number 187 [004] Extension Name 187 A Absent Message 34, 168, 193 Absent Mes.
Display Language Selection 165 Display Lock 170 Display Switching Mode 165 DND ® Do Not Disturb 66, 194 DND Override 200 Do Not Disturb (DND) 66, 194 Do Not Disturb (DND) Button 24 Do Not Disturb (DN.
Manager Password 179 Manager Programming 179 Manual Call Waiting 168 Manual Queue Redirection 97 Message Box, Accessing from Outside 129 Message Box, Accessing Other Extension’s 130 Message Box, Red.
Speed Dialing, System 120, 197 Standard SDN Key Mode 106 Station Program Clear ® Extension Feature Clear 74, 195 Station Speed Dialing ® Personal Speed Dialing 119, 197 Storing New Names and Numbers.
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com/csd Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-TDE600 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-TDE600 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-TDE600, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-TDE600 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-TDE600, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-TDE600.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-TDE600. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-TDE600 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
