Manuel d'utilisation / d'entretien du produit P5Q-EM du fabricant Asus
Aller à la page of 122
Motherboard P5Q-EM.
ii E3726 First Edition V1 July 2008 Copyright © 2008 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transm.
iii Contents Contents ...................................................................................................... iii Notices ......................................................................................................... vi Safety information .
iv Contents 1.10 Connectors ................................................................................. 1-30 1.10.1 Rear panel connectors .................................................. 1-30 1.10.2 Internal connectors ........................
v Contents 2.5.1 CPU Conguration ........................................................ 2-25 2.5.2 Chipset .......................................................................... 2-27 2.5.3 Onboard Devices Conguration ......................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
ix Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
x P5Q-EM specications summary (continued on the next page) CPU LGA775 socket for Intel ® Core ™ 2 Extreme / Core ™ 2 Quad / Core ™ 2 Duo / Pentium ® dual-core / Celeron ® dual- core / Cele.
xi P5Q-EM specications summary ASUS Unique features ASUS Power Saving solution: - ASUS EPU-4 Engine - AI Nap ASUS Express Gate ASUS Quiet Thermal Solution: - ASUS Fanless Design - ASUS Fan Xpert ASUS Crystal Sound: - ASUS Noise Filtering ASUS EZ DIY : - ASUS Q-Connector - ASUS O.
xii P5Q-EM specications summary Internal connectors 3 x U SB c onn ect ors su pp ort 6 a ddi tio nal USB po rts 1 x Floppy disk drive connector 1 x IDE connector 6 x SA T A connectors 1 x CPU / 1 x.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
1-2 Chapter 1: Product Introduction 1.1 Welcome! Thank you for buying an ASUS ® P5Q-EM motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout.
ASUS P5Q-EM 1-3 1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS).
1-4 Chapter 1: Product Introduction HDMI/DVI/D-Sub Interface HDMI (High-Denition Multimedia Interface) is a set of digital video standards that delivers multi-channel audio and uncompressed digital video through a single cable for full HD 1080p visuals.
ASUS P5Q-EM 1-5 1.3.2 ASUS unique features ASUS Express Gate T aking only 5 seconds to go online from bootup, Express Gate is the one-stop gateway to instant fun! It’s a unique motherboard built-in OS.
1-6 Chapter 1: Product Introduction Fan Xpert ASUS Fan Xpert intelligently allows users to adjust both the CPU and chassis fan speed according to different ambient temperature, which is caused by different climate conditions in dif ferent geographic regions and system loading.
ASUS P5Q-EM 1-7 ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB ash disk containing the BIOS le. See page 2-9 for details. ASUS MyLogo 2™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen.
1-8 Chapter 1: Product Introduction.
ASUS P5Q-EM 1-9 1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings.
1-10 Chapter 1: Product introduction 1.5 Motherboard overview 1.5.1 Motherboard layout Refer to 1.10 Connectors for mo re information about rear panel connectors and internal connectors.
ASUS P5Q-EM 1-1 1 1.5.2 Layout contents Connectors/Jumpers/Slots Page 1. Keyboard power (3-pin PS2_USBPW56) 1-29 2. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) 1-42 3. LGA775 CPU Socket 1-14 4. DDR2 DIMM slots 1-19 5. CPU, chassis, and power fan connectors (4-pin CPU_F AN; 3-pin CHA_F AN1; 3-pin PWR_F AN) 1-39 6.
1-12 Chapter 1: Product introduction 1.5.3 Placement direction When installing the motherboard, m ake sure that you place it into the ch assis in the correct orientation. The edge with external ports goes to the rear p art of the chassis as indicated in the image below .
ASUS P5Q-EM 1-13 1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium ® dual-core / Celeron ® dual-core / Celeron ® Processors.
1-14 Chapter 1: Product introduction 1.6.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. Before installing the CPU, make sure that the cam box is facing towards you and the load lever is on your left. T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.
ASUS P5Q-EM 1-15 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch.
1-16 Chapter 1: Product introduction The motherboard supports Intel ® LGA775 processors with the Intel ® Enhanced Memory 64 T echnology (EM64T), Enhanced Intel SpeedStep ® T echnology (EIST), and Hyper-Threading T echnology . Refer to the Appendix for more information on these CPU features.
ASUS P5Q-EM 1-17 1.6.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel ® processor , the package includes the CPU fan and heatsink assembly .
1-18 Chapter 1: Product introduction 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 1.6.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1.
ASUS P5Q-EM 1-19 1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM.
1-20 Chapter 1: Product introduction 1.7.2 Memory congurations Y ou may install 512 MB, 1 GB, 2 GB, and 4 GB non-ECC, unbuffered, DDR2 DIMMs into the DIMM sockets. • Due to chipset behavior , to obtain memory frequency higher than DDR2 800, you can manually adjust DRAM Frequency in BIOS settings.
ASUS P5Q-EM 1-21 P5Q-EM Motherboard Qualied V endors Lists (QVL) DDR2-800MHz capability P5Q-EM Motherboard Qualied V endors Lists (QVL) DDR2-1066MHz capability V endor Part No. Size SS/ DS Chip No. CL DIMM support A* B* C* A-DA TA ADQYE1B16 2048MB DS Heat-Sink Package 5 • Apacer Box P/N:CH.
1-22 Chapter 1: Product introduction GEIL GB22GB6400C5DC 2048MB(Kit of 2) DS GL2L64M088BA30EB 5-5-5-15 • • • GEIL GB24GB6400C4DC 4096MB(Kit of 2) DS GL2L128M88BA25AB 4-4-4-12 • • • GEIL GB.
ASUS P5Q-EM 1-23 SS - Single-sided / DS - Double-sided DIMM support: • A*: Supports one module inserted in any slot as Single-channel memory conguration. • B*: Supports one pair of modules inserted into either the yellow slots or the black slots as one pair of Dual-channel memory conguration.
1-24 Chapter 1: Product introduction 1.7.4 Removing a DIMM T o remove a DIMM 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your ngers when pressing the retaining clips.
ASUS P5Q-EM 1-25 1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.
1-26 Chapter 1: Product introduction 1.8.3 Interrupt assignments IRQ assignments for this motherboard A B C D E F G H 1394 (FW3227) – – – shared – – – – LAN (81 1 1C) – shared – – .
ASUS P5Q-EM 1-27 PCI slot PCIe x1 slot PCIe x1 slot PCIe 2.0 x16 slot 1.8.4 PCI slot The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. Refer to the gure below for the location of the slot.
1-28 Chapter 1: Product introduction 1.9 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and s ystem setup parameters by erasing the CMOS RTC RAM data.
ASUS P5Q-EM 1-29 3. USB device wake-up (3-pin USBPW1-4; USB7-10; USB1 1 12) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
1-30 Chapter 1: Product introduction 1.10 Connectors 1.10.1 Rear panel connectors 1. PS/2 keyboard / mouse combo port. This port is for a PS/2 keyboard or mouse. 2. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices.
ASUS P5Q-EM 1-31 1 1. USB 2.0 ports 1 and 2. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 12. DVI-D Out port. This port is for any DVI-D compatible device and is HDCP compliant allowing playback of HD DVD, Blu-Ray and other protected content.
1-32 Chapter 1: Product introduction • Due to the Intel ® VGA driver issue, the Windows ® Display Settings menu may offer some resolution options that your monitor does not support. When you set a resolution not supported by your monitor , it will black out.
ASUS P5Q-EM 1-33 T roubleshooting on monitor overscan/underscan problem 1. Install Intel Graphics Accelerator Driver from the motherboard support DVD. 2. From the Windows ® notication area, double-click the Intel(R) Graphics Media Accelerator Driver icon and click Graphics Properties .
1-34 Chapter 1: Product introduction 1.10.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive.
ASUS P5Q-EM 1-35 Drive jumper setting Mode of device(s) Cable connector Single device Cable-Select or Master - Black T wo devices Cable-Select Master Black Slave Gray Master Master Black or gray Slave Slave • Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector .
1-36 Chapter 1: Product introduction Connect the right-angle side of SA T A signal cable to SA T A device. Or you may connect the right-angle side of SA T A cable to the onboard SA T A port to avoid mechanical conict with huge graphics cards. • These connectors are set to Standard IDE mode by default.
ASUS P5Q-EM 1-37 4. USB connectors (10-1 pin USB78; USB910; USB1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.
1-38 Chapter 1: Product introduction 5. IEEE 1394a port connector (10-1 pin IE1394_2) This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector , then install the module to a slot opening at the back of the system chassis.
ASUS P5Q-EM 1-39 7. CPU, chassis and power fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1, 3-pin PWR_F AN) The fan c onnect ors su pport co oling fans o f 350 mA–2000 mA (24 W max.) or a total of 1 A–7 A (84 W max.) at +12V . Connect the fan cables to the fan –7 A (84 W max.
1-40 Chapter 1: Product introduction 8. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch.
ASUS P5Q-EM 1-41 10. Front panel audio con nec tor (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
1-42 Chapter 1: Product introduction 12. ATX po wer co nn ec tor s (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS P5Q-EM 1-43 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
1-44 Chapter 1: Product introduction ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector . 1. Connect the front panel cables to the ASUS Q-Connector .
ASUS P5Q-EM 1-45 1.11 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector .
1-46 Chapter 1: Product introduction 1.12 Turning off the computer 1.12.1 Using the OS shut down function If you are using Windows ® Vista: 1. Click the Start button and then select Shut Down . 2. The power supply should turn off after Windows ® shuts down.
2 Chapter 2: BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2-2 Chapter 2: BIOS setup 2.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.
ASUS P5Q-EM 2-3 Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1.
2-4 Chapter 2: BIOS setup Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears.
ASUS P5Q-EM 2-5 2.1.2 Creating a bootable oppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>.
2-6 Chapter 2: BIOS setup 2.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility .
ASUS P5Q-EM 2-7 2.1.4 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process.
2-8 Chapter 2: BIOS setup 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] where [lename] is the latest or the original BIOS le on the bootable oppy disk.
ASUS P5Q-EM 2-9 2.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
2-10 Chapter 2: BIOS setup 2.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section 2.1 Managing and updating your BIOS . Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup.
ASUS P5Q-EM 2-1 1 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration Ai T weaker For changing the overclocking settings Ad.
2-12 Chapter 2: BIOS setup 2.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
ASUS P5Q-EM 2-13 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 2.3.1 System Time [xx:xx:xx] Allows you to set the system time. 2.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
2-14 Chapter 2: BIOS setup 2.3.4 SA T A 1–6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information.
ASUS P5Q-EM 2-15 DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology .
2-16 Chapter 2: BIOS setup Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be ef fective only if the device is accessed through BIOS. Conguration option: [Disabled] [Enabled] IDE Detect Time Out (Sec) [35] Selects the time out value for detecting A T A/A T API devices.
ASUS P5Q-EM 2-17 2.3.7 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. Bios Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication.
2-18 Chapter 2: BIOS setup 2.4 Ai Tweaker menu The Ai T weaker menu items allow you to congure overclocking-related items. T ake caution when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction.
ASUS P5Q-EM 2-19 CPU Ratio Setting [Auto] Allows you to adjust the ratio between CPU Core Clock and FSB Frequency . Use the <+> and <-> keys to adjust the value. The values may vary depending on the CPU installed. Conguration options: [Auto] [06.
2-20 Chapter 2: BIOS setup Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. DRAM Timing Control [Auto] Conguration options: [Auto] [Manual] • The following sub-items apprear only when you set the DRAM Timing Control item to [Manual].
ASUS P5Q-EM 2-21 WRITE to READ Delay(D) [Auto] Conguration options: [Auto] [1 DRAM Clocks]–[15 DRAM Clocks] READ T o READ Delay(S) [Auto] Conguration options: [Auto] [1 DRAM Clocks]–[15 DRAM.
2-22 Chapter 2: BIOS setup Ai T ransaction Booster [Auto] Allows you to set the system performance. Conguration options: [Auto] [Manual] The following two sub-items appear only when you set the Ai T ransaction Booster item to [Manual].
ASUS P5Q-EM 2-23 NB V oltage [Auto] Allows you to set the North Bridge voltage. The values range from 1.10V to 1.70V with a 0.02V interval. • Setting the CPU PLL Voltage, FSB T ermination V oltage, DRAM V oltage and NB V oltage items to a high level may damage the chipset, memory module and CPU permanently .
2-24 Chapter 2: BIOS setup CPU Clock Skew [Auto] Conguration options: [Auto] [Normal] [Delay 100ps] [Delay 200ps]–[Delay 1500ps] NB Clock Skew [Auto] Conguration options: [Auto] [Normal] [Dela.
ASUS P5Q-EM 2-25 2.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
2-26 Chapter 2: BIOS setup CPU Ratio Setting [Auto] Allows you to adjust the ratio between CPU Core Clock and FSB Frequency . Use the <+> and <-> keys to adjust the value. The values may vary depending on the The values may vary depending on the CPU installed.
ASUS P5Q-EM 2-27 2.5.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. North Bridge Conguration Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory .
2-28 Chapter 2: BIOS setup 2.5.3 Onboard Devices Conguration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5Q-EM 2-29 2.5.4 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.
2-30 Chapter 2: BIOS setup USB 2.0 Controller [Enabled] Allows you to enable or disable the USB 2.0 controller . Conguration options: [Enabled] [Disabled] USB 2.0 Controller Mode [HiSpeed] Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps).
ASUS P5Q-EM 2-31 2.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 2.6.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for system suspend.
2-32 Chapter 2: BIOS setup 2.6.5 APM Conguration Restore On AC Power Loss [Power Off] When set to [Power Off], the system goes into of f state after an AC power loss.
ASUS P5Q-EM 2-33 2.6.6 Hardware Monitor CPU T emperature [xxxºC/xxxºF] MB T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Ignored] if you do not wish to display the detected temperatures.
2-34 Chapter 2: BIOS setup CPU Fan Profile [Standard] Allows you to set the appropriate performance level of the ASUS Q-Fan. When set to [Standard], the CPU fan automatically adjusts depending on the CPU temperature. Set this item to [Silent] to minimize fan speed for quiet CPU fan operation, or [T urbo] to achieve maximum CPU fan speed.
ASUS P5Q-EM 2-35 2.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. 2.7.1 Boot Device Priority 1st ~ xxth Boot Device [xxx Drive] These items specify the boot device priority sequence from the available devices.
2-36 Chapter 2: BIOS setup 2.7.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
ASUS P5Q-EM 2-37 2.7.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password.
2-38 Chapter 2: BIOS setup User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility .
ASUS P5Q-EM 2-39 2.8 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item +- Change Field Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
2-40 Chapter 2: BIOS setup 2.8.2 Express Gate Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate feature is a unique instant-on environment that provides quick access to the Internet browser and Skype.
ASUS P5Q-EM 2-41 2.8.3 ASUS O.C. Prole This item allows you to store or load multiple BIOS settings. Save to Prole 1/2 Allows you to save the current BIOS le to the BIOS Flash. Press <Enter> to save the le. Load from Prole 1/2 Allows you to load the previous BIOS settings saved in the BIOS Flash.
2-42 Chapter 2: BIOS setup 2.8.4 AI Net 2 Check Realtek LAN Cable [Disabled] Enables or disables checking of the Marvell LAN cable during the Power-On Self-T est (POST). Conguration options: [Disabled] [Enabled] v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
ASUS P5Q-EM 2-43 Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. 2.9 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items.
2-44 Chapter 2: BIOS setup.
3 Chapter 3: Software support This chapter describes the contents of the support DVD that comes with the motherboard package..
3-2 Chapter 3: Software support If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder .
ASUS P5Q-EM 3-3 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll-Drivers Installation Wizard Installs the ASUS InstAll-Drivers Installation Wizard.
3-4 Chapter 3: Software support 3.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard.
ASUS P5Q-EM 3-5 ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows ® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP). ASUS Express Gate Installer Installs the ASUS Express Gate application.
3-6 Chapter 3: Software support 3.2.4 Make disk menu The Make disk menu contains items to create the Intel ICH10R driver disk. Intel ICH10R 32/64 bit RAID/AHCI Driver Disk Allows you to create an ICH10R 32/64bit RAID/AHCI driver disk.
ASUS P5Q-EM 3-7 3.2.5 Manual menu The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader before opening a user manual le.
3-8 Chapter 3: Software support 3.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard.
ASUS P5Q-EM 3-9 T echnical support Form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.
3-10 Chapter 3: Software support 3.3 ASUS Express Gate ASUS Express Gate is an instant-on environment that gives you quick access to the Internet. Within a few seconds of powering on your computer , you will be at the Express Gate menu where you can start the web browser , Skype, or other Express Gate softwares.
ASUS P5Q-EM 3-1 1 The First Screen Express Gate’s rst screen appears within a few seconds after you power on the computer . From here, you can immediately start the web browser or Skype. Y ou can also choose to continue booting normally (e.g. to your installed OS such as Windows), enter BIOS setup, or power off.
3-12 Chapter 3: Software support Knowing the Express Gate hot-keys Here is a list of common-used hot-keys for Express Gate. In the First Screen: Key Function P AUSE/BREAK Power-off ESC Continue to boo.
ASUS P5Q-EM 3-13 Using the Conguration Panel Use the conguration panel to change various Express Gate settings. Click on an icon to open a particular conguration tool. The following tools are available: • Date and T ime : set current date and time as well as time zone.
3-14 Chapter 3: Software support Using the LaunchBar The LaunchBar has several system icons that show you various system statuses and let you congure individual Express Gate settings. The LaunchBar can be congured to auto-hide, if you want more screen space for the softwares.
ASUS P5Q-EM 3-15 2. Open Network. Network Click to change LaunchBar options (auto-hide, docking position, etc). Click to show the “ASUS Utility” panel (if supported). Click to show “About Express Gate.” Click to open Express Gate Help. Click to bring up power options window to boot to OS, restart or power down.
3-16 Chapter 3: Software support 3. Make the proper network congurations. Each network interface is enabled immediately when you check the box next to it. • If you use a network cable connected to a home router (which is then connected to your DSL/cable modem), enable LAN1.
ASUS P5Q-EM 3-17 Using the Photo Manager Express Gate provides a easy-to-use Photo Manager that allows you to view pictures stored in your hard drive or external storage devices (such as USB dongles, card readers, or optical disks).
3-18 Chapter 3: Software support Conguring Express Gate in BIOS Setup Enter BIOS setup by pressing DEL key after powering on or by clicking on the BIOS setup icon on Express Gate’s rst screen. Express Gate conguration options are under the T ools menu.
ASUS P5Q-EM 3-19 3.4.2 Creating a RAID driver disk in Windows ® T o create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, and then click Intel ICH10R 32/64 bit RAID Driver Disk to create an Intel ® ICH10R RAID driver disk.
3-20 Chapter 3: Software support T o install the RAID driver in Windows XP: 1. During the OS installation, the system prompts you to press the <F6> key to install third-party SCSI or RAID driver . 2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk drive.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus P5Q-EM c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus P5Q-EM - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus P5Q-EM, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus P5Q-EM va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus P5Q-EM, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus P5Q-EM.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus P5Q-EM. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus P5Q-EM ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
